Used Kasto Kastopsb 255 for sale (1,034)

Condition: used, Year of construction: 1960, pressure 10 t distance between columns 260 mm dayligth 210 mm Ijdpfxjwl N Sao Anmjba table surface area 275 x 260 mm

Condition: good (used), working width: 2,550 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), Guillotine SAFAN - HT 255-8 MACH-ID 9237 Make: SAFAN Type: HT 255-8 Isdpfsxdb Eyox Anmoba Control: ARA TOUCHSCREEN Touchscreen backgauge Maximum sheet thickness: 8mm Max. cutting length: 2550mm Strokes on full length: 19mm Strokes in short 1000 length:40 Cutting angle: 0,5 - 2 Gr° Length backgauge: 0 - 1000mm Number of down holders: 17 Approach speed: 200mm/sec. Power: 15kW Length: 3400mm Width: 2300mm Height: 2150mm Weight: 8900kg

Condition: used, Hydraulic band saw (Made in Croatia), type BS 320 Year of manufacture approx. 1980 Cutting range, round: Ø 320 mm Cutting range, square: 280 x 280 mm Saw blade: 550 x 45 x 2.25 mm Ibedpfolqadhex Anmoa Material feed height: 680 mm Saw speed: 42 - 55 - 85 - 110 strokes/min Motor power: 1.8 and 2.4 kW, pole-changing Power supply: 400 Volt, Hz - Miter adjustment up to 45° - Saw motor with 2 speeds and 2 V-belt stages - Hydraulic saw arm lowering - Hydraulic cutting pressure adjustment via throttle valve - Coolant system in the machine base Space requirement, band saw L x W x H: 1900 x 1350 x 1500 mm Width without stop: 800 mm Weight: approx. 750 kg Good condition

Condition: used, functionality: fully functional, power: 128.4 kW (174.58 HP), operation weight: 26,500 kg, Year of construction: 2014, operating hours: 8,700 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, JCB JZ255 NLC Short-Tail Crawler Excavator Year of manufacture: 2014 8700 operating hours 26,500 kg 128.4 kW Isuzu engine Oilquick OQ 70/55 fully hydraulic quick coupler Adjustable boom Blade support Hydraulic ditching bucket Automatic climate control Camera Ibsdpfjy Sxyyex Anmsa Undercarriage width: 3 m Short-tail design

Condition: new, functionality: fully functional, empty load weight: 235 kg, maximum load weight: 1,115 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MP 255 133 1350 2 NEW VEHICLE Internal dimensions: 255cm x 133cm Side board height incl. railing: 43cm Load area height: 52cm Total weight: 1350Kg Payload: 1115Kg braked single-axle flatbed trailer Overrun brake and parking brake by KNOTT 1350Kg axle with brake Low chassis fully welded, hot-dip galvanized steel frame Aluminum profile side boards Steel railing rear side board foldable and removable with tension lock 15mm thick, non-slip and robust screen-printed plywood floor Drawbar wheel 6 lashing eyes with 400Kg tensile force 14" reinforced C-type tires 2x chock M+S tires Net/rope hook on the frame 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE STARTING FEBRUARY 2026 Ibedpfx Ansgrqy Aemoa -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -foldable and removable front panel -Ramps -SARIS aluminum wheels -complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf grate in various heights, also closed -Flat cover with or without frame -High cover 150cm or 180cm -Rear supports Further accessories available on request! plus freight to Gera and vehicle registration document €100 net Images are for illustration purposes only and may show optional accessories that incur an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: used, functionality: fully functional, Lead and feed screw lathe Manufacturer: CMT Tortona, Italy, Model Ursus 225 Technical Data Brand: CMT Tortona, Italy Model: URSUS 225 Year of manufacture: unknown Control: conventional Distance between centers: 1000 mm Swing over bed: 450 mm Spindle bore: 52 mm Dimensions: L 2.50 x W 1.0 x H 1.40 m Machine weight: approx. 3 t Equipment - Three-jaw chuck, make Klopfer D 250 mm - Chip tray - Live center - 3 tool holders Isdpfx Anoyznanjmeba All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed Ijdpfx Aod Iipzjnmeba with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds Ijdod Iip Ajpfx Anmoba • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: good (used), Rotary vane vacuum pump Status: General overhaul; Like new Warranty: 12 months Delivery time: In stock Manufacturer: Busch Type: R5 RA 255D Ibodpecipmusfx Anmja Motor: 400V Operating fluid: Mineral oil Nominal suction capacity: 250 m³/h Ultimate pressure: 0.5 mbar (absolute) Accessories: Operating manual; Oil fill (mineral oil); Vacuum suction filter Delivery time: In stock (subject to prior sale) If you have any questions about vacuum technology, we are happy to assist you.

Condition: excellent (used), Part suitable for: cars Technical condition: very good Ibjdpox N R R Ssfx Anmja Optical condition: very good

Condition: excellent (used), Part suitable for: cars Iedpfex N R Rxox Anmoba Technical condition: very good Optical condition: very good

Condition: excellent (used), Part suitable for: cars Technical condition: very good Isdpjx N R Rrefx Anmjba Optical condition: very good

Condition: used, functionality: fully functional, Year of construction: 1997, Used Safan guillotine shear Type: VS 255 4 Isdexzf Slspfx Anmsba Capacity: 2550 x 4 mm Electrically adjustable backgauge Manual adjustment of cutting angle and blade gap

Condition: used, functionality: fully functional, Year of construction: 1997, Used guillotine shear by Safan Ibodpoxrf Hwjfx Anmja Type: VS 255 4 Capacity: 2550 x 4 mm Electric back gauge with NC control

Condition: new, Saw blade diameter 255 mm Sawblade tiltable 45 ° Cutting height 75 mm Table dimensions 640 x 920 (ausgezogen) mm Saw blade 30 mm Motor output 1,6 kW Ibjdpfxju Imito Anmja connected load frequency 230 V machine weight ab. 32 kg Dimensions (L/W/H) 720 x 1080 x 920 mm

Condition: used, functionality: fully functional, Year of construction: 1989, Hydraulic Guillotine Shear Ijdpfxsxhc Svo Anmeba Make: SAFAN Model: VS 255-8 Year: 1989 Technical Data: Manufacturer: SAFAN Model: VS 255 - 8 Year of manufacture: 1989 Working Length: 2550 mm Sheet Thickness: 8 mm Motor Power: 11 kW Sheet Hold-Downs: 24 Cutting Angle: min. 0.5° / max. 1.5° Dimensions: L 3.50 x W 2.50 (plus support arms 1.6 m) x H 1.95 m Weight: approx. 8 t Equipment: • Angle gauge • 2 x support arms • Motorized backgauge 1000 mm with digital readout • Pneumatic sheet support device • Adjustable cutting angle • Manual blade gap adjustment • Cutting length limit All information subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: new, functionality: fully functional, empty load weight: 285 kg, maximum load weight: 1,215 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MP 255 153 1500 2 NEW VEHICLE Internal dimensions: 255 cm x 153 cm Side wall height incl. railing: 43 cm Loading platform height: 52 cm Gross vehicle weight: 1,500 kg Payload: 1,215 kg Braked single-axle low-loader Overrun brake and handbrake by KNOTT 1,500 kg braked axle Low chassis Fully welded hot-dip galvanized steel frame Aluminum profile side walls Steel railing Rear tailgate foldable and removable 15 mm thick, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing eyes with 400 kg tensile strength each 14" reinforced C-rated tires M+S tires Net/rope hooks on frame 13-pin connector Front marker lights Rear lights with reversing light, fog lamp (NSL), and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -100 km/h approval kit (shock absorbers) -Spare wheel with holder -Foldable and removable front wall -Integrated loading ramps, 2,000 kg capacity -SARIS alloy wheels -Full LED lighting -Anti-theft device -Net, fine or coarse mesh -H-frame -Mesh side panels in various heights, also closed -Flat cover with or without bows -High tarpaulin (150 cm or 180 cm) -Rear support legs Further accessories available on request! Plus shipping to Gera and vehicle registration documents: €150 net Pictures are for illustrative purposes only and may show optional, extra-cost accessories. Have you not found the right trailer yet? We have 50–100 vehicles in stock at all times for immediate pickup. Our workshop is open for all types of repairs from 8:00 AM to 5:00 PM on weekdays. Specialist in axle repairs, including for caravans. Large selection of rental trailers. Iedpfjrk Imlox Anmoba Furthermore, we offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice over the phone, visit our website, or stop by directly.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: ARIES -255, overall weight: 10,400 kg, Used AMADA Aries 255 sheet metal processing center (year 1998) for sale. Working area 1250x2500 mm (without repositioning 1250x1250 mm). In working condition, located in Estonia (testing possible). The included tools are marked in the photo. Price: 10,000 EUR + VAT. Transport not included in the price. Ibjdpsxxiv Aofx Anmsa

Condition: like new (used), Year of construction: 2017, IDEAL 5255 - Electric Guillotine Paper Cutter (like new) Cutting length 520mm, cutting height 80mm Professional-grade guillotine cutter with automatic clamping, electric backgauge with touchscreen control, and programmable operation. Cutting Length: 520 mm Insertion Depth: 520 mm Cutting Height: 80 mm Residual Cut: 35 mm Electro-mechanical drive for blade and clamp bar Automatic clamping Electrically driven backgauge with touchscreen Multi-language operator guidance and digital measurement display Measurement display in cm/inches (accuracy 0.1 mm) Direct key input of dimensions via numeric keypad Isdpfx Aoxwd Htsnmeba 99 programs, each with 99 programmable steps (up to 15 step measurements can be stored as one sequence) Memory mode for chain cutting Pre-programmed DIN sizes from A6 to A3 Automatic program run for cutting operations Automatic set function for reference measurement, paper feed (EJECT) Electronic handwheel with infinitely variable speed for manual fine adjustment of the backgauge Optical cutting indicator with high-intensity LEDs EASY CUT: two-hand operation with simultaneous release control Premium-quality blade made from high-grade cutter steel All-steel blade carrier and hardened, adjustable blade guides Electronically controlled safety device on the front table and protective cover on the rear table Comprehensive SCS safety package (Safety Cutting System): ensures safety even outside of cutting operations, e.g., during blade or cutting stick replacement

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 40 mm -Load capacity: 2500 kg Ibsdpfedg Snrsx Anmoa -Weight: 12 kg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws Isdpfx Anodg Snkemjba -Span: 0 to 60 mm -Load capacity: 5000 kg -Number: 2x terminals available -Price: per piece -Weight: 49 kg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws Ibjdodi Sl Eepfx Anmja -Span: 0 to 20 mm -Load capacity: 1000 kg -Number: 1x terminal available -Price: per piece -Weight: 6 kg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 38 mm -Load capacity: 2500 kg Ijdpfxedg Sngs Anmsba -Number: 3x terminals available -Price: per piece -Weight: 15 kg

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 40 mm -Load capacity: 3500 kg -Number: 1x terminal available Isdodi Sk Aopfx Anmsba -Weight: 30 kg

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 25 to 75 mm -Load capacity: 2500 kg Ibjdpfx Asdkbf Nsnmja -Number: 1x terminals available -Price: per piece -Weight: 21 kg