Used Kmk Multihead Weigher Combination Weigher Scale for sale (6,414)

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Manufacturer – Joy Conveyors Ltd. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. Manufacturer – Joy Conveyors Ltd. 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Manufacturer – High Dream Intelligent Machinery Co., Ltd. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. Manufacturer – Keymac Packaging Systems Ltd. 1 x Keymac vertical form, fill and seal twin bagging machine. Manufacturer – Keymac Packaging Systems Ltd. Model – BT2600 VFFS. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. Dsdpfsy An I Isx Adrecn System footprint - 7.5m long x 3.4m wide x 4.4m high.

Condition: used, This listing is for a Millipore Progard TS2 Pretreatment Pack. The unit is in full working condition and is ready for immediate release. Dedpfx Adexxyigjrjcn The Progard TS2 Pre-treatment Pack is an essential component for enhancing the performance and longevity of various water purification systems, including Elix, RiOs™, AFS, and Milli-Q Integral systems. Key Features: - Particle Removal: Effectively removes large particles and sediments from tap water using a depth filter, which helps maintain the integrity of the downstream purification processes. - Chlorine Removal: The inclusion of silver-impregnated activated carbon efficiently eliminates free chlorine from the water, protecting sensitive membranes from oxidative damage. - Scaling Prevention: Polyphosphates in the pack help prevent mineral scaling on the reverse osmosis (RO) membrane, ensuring optimal water flow and quality. - Organics Protection: The combined components protect against organic fouling, which can degrade the performance of the RO membrane over time. Technology and Monitoring: - e-sure RFID Tag:Each pre-treatment pack is equipped with an e-sure RFID tag, providing real-time visibility into the pack’s parameters. This feature allows for easy tracking of replacement timelines and performance monitoring. Benefits: - Extended System Lifespan: By removing contaminants and protecting the RO membrane, the Progard TS2 pack extends the operational life of the water purification system. - Enhanced Water Quality:Ensures that the water produced meets the high standards required for laboratory applications, minimizing the risk of interference in experiments or processes. - Operational Efficiency: With improved protection from fouling and scaling, the overall performance of the water system is optimized, reducing maintenance needs and downtime. - Applications: Ideal for use in laboratories, research facilities, and industrial applications where high-quality purified water is crucial for experiments, analyses, and processes.

Condition: used, This listing is for the Mettler Toledo ICS439 Weighing Terminal The unit is in full working condition and is ready for immediate use The ICS439 is a scale indicator / weighing terminal used to process signals from load cells (i.e. weight sensors) and display weight, tare, net, etc. It belongs to the ICS4_9 “wet environment / hygienic” family, meaning it is intended for use in harsher or wash‑down conditions (e.g. food processing, pharmaceutical, industrial) where water, cleaning, or humidity are a factor. It can function either as a standalone terminal (connected to a weighing platform) or as a compact scale (terminal + platform combined) depending on configuration Use Cases & Applications Djdpfx Aexhdr Rjdrecn Often used in industrial / production settings for basic weighing and checkweighing (i.e. verifying whether a weight is above / below a target threshold) Particularly suitable for hygienic / wet environments (e.g. food processing, chemical, pharma) due to its high ingress protection and stainless steel construction. Can integrate into plant control systems via its communication interfaces to send weight data to a computer/PLC for automation or logging

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 11,800 h, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Combined punching/laser working area: 3,000 × 1,500 mm Punching mode working area: 3,000 × 1,500 mm Laser mode working area: 3,000 × 1,500 mm Max. sheet thickness, structural steel: max. 8 mm Max. sheet thickness, stainless steel: max. 8 mm Max. sheet thickness, aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching stroke rate at E = 1 mm: max. 900/min Max. marking stroke rate: max. approx. 2,800/min Max. number of multi-tools with 3 clamping units: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneously: max. 108 m/min MACHINE DETAILS Operating hours: 11,800 h Laser on time: 42,100 h Dsdpez Izu Tjfx Adrscn EQUIPMENT SheetMaster ToolMaster GripMaster Large-format working area without repositioning Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet removal to lifting table

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Dcodpstwqzrefx Adren

Condition: ready for operation (used), Year of construction: 2010, Control measuring range: 50g-150g, accuracy class: XIII(1), scale graduation: 1g, readability: 1g, product weight min./max.: 10g/500g, cadence: 90rpm, measuring speed: 0.52m/s. Documentation available. On-site inspection is possible. Dcsdpewqf T Rjfx Adrjn

Condition: reconditioned (used), Year of construction: 1999, Paper Unloader for High-Speed Guillotines – with Jogger and Bizerba Sheet-Counting Scale Automatic unloading and palletising after cutting Are you looking for an unloader for your guillotine, such as a Polar Transomat? This Knorr system can be used to unload your guillotine, offering a productivity-enhancing alternative to a pile lift. The Knorr unloader picks up the paper lifts using a clamp gripper and deposits them on the pallet with precise edge alignment. For this application, the unloader is positioned to the left of the guillotine. Additional application: Jogging and palletising counted paper sheets In combination with the included Knorr jogger and Bizerba sheet-counting scale, the system can also be used to stack and palletise counted batches of paper sheets. The sheet count is determined by weight using the paper-counting scale. The paper lift is then precisely aligned in the automatic jogger, and trapped air is expelled using the air-expulsion roller. The unloader picks up the prepared lift with its clamp gripper and deposits it on the pallet with precise edge alignment. The system offered comprises: - Knorr unloader with clamp gripper - Knorr automatic jogger with air-expulsion roller - Bizerba ITS industrial sheet-counting scale Dcodpfx Adohfhtkjrjn Please let us know how you intend to use the system so that we can discuss the appropriate integration into your production workflow.

Condition: used, machine/vehicle number: P21120H01993, Year of construction: 2017, operating hours: 8,479 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dedpfx Aoz Iwr Ujdrecn Lifting height: 8,255 mm Load capacity: 1,600 kg Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,250 x 3,430 mm Own weight: 4,100 kg Year of battery manufacture: 03/2018 Battery voltage: 48 V Battery capacity: 775 Ah Rest voltage: 50.4 V Service valid until: 09/2027 UVV (Occupational Safety) valid until: 09/2027 Operating hours: 8,479 h EQUIPMENT Former Linde full-service unit 3rd auxiliary valve 4th auxiliary valve Integrated scale Integrated lifting height indicator Overhead guard LED work light, front LED work light, rear Safety light, front Rear-view camera Side shifter If the mast is too high, it can be disassembled for transport upon request and loaded accordingly. All dimensions are approximate. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 205

Condition: used, Year of construction: 2026, New demonstration machine! General technical features: - Control: 7.0" touchscreen ConnectTouch control - Cutting height and cutting angle electronically controlled, digital input of cutting height and angle (controlled positioning of the motorized axes) and movement of the motorized axes in hold mode (axis movement via push button); display resolution: 0.1 mm or 0.01°; repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron, table extension as standard across the entire table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite structure, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm, main saw blade ø 30 mm with additional holes, scoring saw ø 36 mm, tool cutting width max. 20.0 mm for machines with single-sided tilting, 6 mm for machines with double-sided tilting; saw blades up to 350 mm can be lowered under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool tilt: 0° to + 47°, tilting only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / saw blade ø 450 mm; T7710/1: +45°: 106 mm / ø 450 mm; T7710/2: +45°: 104 mm / ø 450 mm; -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, due to its design, the motor can be overloaded several times its rated power for a short period of time and thus offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is rotatably mounted around its vertical axis. In addition, it can be swiveled to the right, so that larger components can also be processed easily - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stop elements; dimension display via scale with magnifying glass; cutting length 95 - 2000 mm, extendable up to 3220 mm - Cross table: Made of powder-coated steel, workpiece support in anodized aluminum, two sliding supports for extending the support area; length stop can be placed in the front and rear position without lifting; one-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating, Cast iron: Table surface finely milled, Aluminum: Aluminum components anodized - Protective cover / extraction: Height-adjustable protective cover incl. interchangeable rear part for miter cuts; protective cover for saw blades up to ø 450 mm (optionally 550 mm); extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; total extraction connection Ø 140 mm; minimum air volume: Vmin 18.5 m3/min at 20 m/s, negative pressure 1,400 Pa - Electrical equipment: Contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (control panel, stand) Dcedpfjz A Hh Usx Adren

Condition: new, functionality: fully functional, gearing type: other, color: green, emission class: none, mast type: other, brakes: other, suspension: other, Year of construction: 2026, Equipment: low noise, TICAB RA 800 | Small Asphalt Plant & Recycler – Asphalt Production Equipment The TICAB RA 800 Asphalt Recycler is a professional mini asphalt plant designed for hot mix asphalt production, asphalt recycling, pothole repair, crack filling, road resurfacing, patching, and pavement maintenance. This versatile unit reuses reclaimed asphalt pavement (RAP) to produce high-quality hot mix asphalt directly on-site, saving materials, energy, and costs. Ideal for municipalities, contractors, industrial sites, highways, parking lots, and urban road maintenance projects. Key Features: Dcodpfx Adsx U S Hljrsn • Mini asphalt plant & asphalt recycler RA 800 for on-site hot mix asphalt production and RAP recycling • Compact, mobile, and easy to operate on construction sites, municipal roads, highways, parking areas, driveways, bike paths, and industrial pavements • Supports bitumen emulsion, tack coat, and recycled asphalt pavement (RAP) • Diesel-fired heating system with precise temperature control for consistent hot mix quality • Durable, robust construction for long-term heavy-duty use • Designed for road contractors, paving companies, municipalities, and civil engineering works • Output capacity: up to 800 kg/h for medium-scale repairs Applications: • Road repair, pothole patching, crack filling, and resurfacing • Hot mix asphalt production and transport • Municipal streets, highways, parking lots, driveways, and industrial surfaces • Asphalt recycling and RAP processing Why Choose TICAB RA 800: Compact, reliable, and versatile, the RA 800 is the perfect choice for all asphalt repair, resurfacing, and pavement maintenance projects. The TICAB RA 800 Asphalt Recycler combines mini asphalt plant capability with on-site recycling efficiency, allowing contractors and municipalities to produce high-quality hot mix asphalt, reduce material costs, and maintain durable road surfaces. Contact us now for price, delivery options, and full technical specifications. Start producing and recycling asphalt efficiently today!

Year of construction: 2025, condition: new, We manufacture new row cleaners according to customer requirements. Dsdsxrcyhspfx Adrocn

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Dodsx U U Ekjpfx Adrscn Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Length:16000mm Width:6000mm Height:6000mm Dcjdpeygu Smsfx Adren

Condition: used, Nikmann FS 41N planer and thicknesser - Planing width: 41 cm - Shaft with 4 knives - 2 table rollers - Motor with brake Dcsdpfsya Drvsx Adrsn Machine in very good, excellent condition.

Condition: excellent (used), Year of construction: 2016, For Sale: Available immediately Konig Ceres 2.1 Year of manufacture: 2016 Automatic bread weigher & divider Weighing range: 100 / 300 grams to approximately 2000 grams Siemens S7 PLC control Suitable for producing a wide variety of breads. Only 9550 operating hours. + spare parts If you have any questions or comments, please do not hesitate to contact us. Inspection is possible on-site. Dsdpfswzlv Hjx Adrscn Transportation can be arranged. Sincerely, Leo Holland

Condition: like new (used), Year of construction: 2021, cutting width (max.): 2,500 mm, cutting length (max.): 9,000 mm, Equipment: documentation/manual, PLASMA TUBE AND SHEET METAL COMBINATION Dcedpsv E Sabjfx Adrjn WORKING RANGE SHEET METAL MM 2500 X 9000 TUBE DIAMETER FROM MM 80 TO MM 550, TUBE LENGTH MM 9000 YEAR OF CONSTRUCTION 2021 HYPERTHERM BRAND PLASMA GENERATOR MODEL XPR 170

Condition: used, Glass scale, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -Manufacturer: Heidenhain, glass scale from milling machine Deckel FP4L Dcsdjuuu H Espfx Adren -Type: LS 803 ML 1240 mm -Quantity: 1x glass scale available -Dimensions: 1345/200/H50 mm -Weight: 1.2 kg

Condition: used, with Tersa knife shaft used, good condition Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Weight approx. 2000 kg Dedpfsvwgh Rex Adrscn Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: used, PLC control -Type: M1400.000 Dcjdob Uhtljpfx Adrsn -Price: per piece -Number: 2x available -Weight: 1 kg

Condition: like new (used), Year of construction: 2020, Avery Berkel XTs420 UK 3054 2 Gigabyte system memory Standard max. 8 GB Optional Solid state storage up to 5 USB 2. 0 ports Touchscreen 13. 3 inch 2 available !!!! Dsdpfol Rahtsx Adrocn Unit price Shipping possible

Condition: used, Year of construction: 2010, Wipotec continuous scale 1500-1100-1000 Dsdpfewblk Rox Adrocn RA2394 No Controller, optional retrofittable This belt conveyor is designed for products up to a maximum of 60 kg. Manufacturer: WIPOTEC Type: WM10 Year of construction: 2010 Total size: approx. 1500 x 1100x 520mm (WxDxH) Electrical connection 1x Light barrier 1x Sick Stegmann DKV60-E1Z0-S05 1x Closeness sensor for speed measurement Weighing technology: Weighing range: 0 - 60000 g calibration values e: from 10g degree of accuracy d: 1g TYP: IW-B 150K Conveyor belt 1500-1100-1000 and SEW gear motor Conveying length (FL): 1500 mm effective width (NUB): 1100 mm belt width (GB): 1000 mm hight (BH): 420-545 mm Motor Type: SEW Gearmotor Motor Power: kW 0.75 S1 Hz 50 Speed: 1,25 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: like new (used), Year of construction: 2023, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been checked by our specialist staff and is in mint condition. Technical data: - 3 system knife planer shaft - Planing width 410 mm - Planing length 1800 mm - Max. passage 230 mm - Motor power 4 kW / 5.4 HP - Extractable Ø 120 mm - Year of manufacture 2023 - Mint condition Dsdpjv Dah Dsfx Adrecn The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-A0117-1

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 230 mm, feed rate X-axis: 36 m/min, total width: 1,860 mm, total length: 3,500 mm, total height: 1,830 mm, number of planer blades: 4, power: 47.25 kW (64.24 HP), Offered for sale is a high-performance four-sided planer moulder manufactured by JKS & Trade Moravia s.r.o., model QMB623W – MBQ623W, purchased new in 2021. The machine has seen minimal use only for 2 years, as it was originally acquired for a production project that was not implemented. Technical Specifications: Working width: 18–230 mm Working thickness: 10–160 mm Feed speed: 7–36 m/min (adjustable) Tool diameter: 125 mm (max) Dcsdpsxup Ecsfx Adrjn Power supply: 400V / 50Hz / 3-phase Installed power: 47.25 kW Main fuse: 100 A Machine dimensions: 3500 × 1860 × 1830 mm Weight: 6,000 kg CE compliant The machine is fully operational, regularly maintained, and comes with original documentation, including the operator manual. Suitable for precise and efficient four-side profiling of solid wood components. 📍 Location: Czech Republic The machine is available for immediate inspection and dispatch. 📩 Please contact us for pricing, detailed photos, or to arrange a viewing.

Condition: new, Year of construction: 2026, 2000 kg Pallet Scale – Durable Warehouse Scale for Pallets and Heavy Loads Dcodpfxjxay Tns Adron The 2000 kg pallet scale is a practical and reliable device designed for use in warehouses, wholesale facilities, and production plants. Its U-shaped construction allows for effortless pallet jack access, significantly speeding up the weighing process. This type of pallet scale eliminates the need for additional ramps or platforms, making daily handling operations simpler and more efficient. Key Technical Specifications: Platform dimensions: 120 x 85 cm – compatible with standard EURO pallets Scale height: only 10 cm – enables easy pallet jack entry Maximum capacity: 2000 kg – suitable for weighing individual packages as well as fully loaded pallets Readability/accuracy: 0.5 kg – ensures precise results even under heavy loads Modern electronic display with a user-friendly control panel Why Choose the 2000 kg Pallet Scale? This warehouse scale stands out with its solid steel construction and high durability for intensive use. Thanks to the low-profile U-shaped platform, pallets can be positioned quickly without the need for auxiliary equipment. The pallet platform scale ensures repeatable measurements and is easy to operate – the clear display enables quick reading of results, saving time for warehouse staff. Applications of the Pallet Scale: This device is highly effective across various logistics and industrial operations. The U-shaped pallet scale is commonly used for inspecting incoming and outgoing goods, conducting inventory, and supporting order picking processes. Whether you run an online store, a wholesale warehouse, or a distribution center – this pallet jack-friendly scale will increase workflow efficiency and improve the accuracy of warehouse operations.

Condition: used, Ishida Checkweigher and Metal Detector Fully stainless steel Dcodpfxoxtfyms Adron Reject bin Weighing range - 0 to 1200 grams 240 volts