Used Kolbe Mw32-80 Mixer / Grinder for sale (19,576)

Condition: used, 2.000L capacity all stainless steel with stirring system conical bottom double-jacket (suitable for cooling) with centrifugal pump power : 4 kW dimensions (w x h) : ± 1800 x 3.035 mm Lhodpfxsy Edpas Akysf

Condition: new, new ! all stainless steel safety lid 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm Ledpfxey Edn Ne Akyjhf The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: excellent (used), Year of construction: 2018, total length: 9,800 mm, total width: 4,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 5,000 m/min, table length: 3,000 mm, table load: 6,000 kg, table width: 1,200 mm, power: 22 kW (29.91 HP), Surface grinder Ziersch - Z1030 MACH-ID 9597 Make: Ziersch Type: Z1030 Control: Mitsubishi Touch Year: 2018 X - Travel: 3500mm Y - Travel: 1100mm Z - Travel: 1100mm Table Length: 3000mm Table Width: 1200mm Table load: 6000 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:500 x 100 x 203mm Power: 22kW Lhsdpsy En Dnjfx Akyof Speeds: 3000Rpm Cooling system: yes Feed rate Y-Axis: 3000mm/min. Length: 9800mm Width: 4000mm Height: 4500mm Weight: 27500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), Year of construction: 2004, Engel 2-shot injection molding machine (horizontal and vertical) 80 tons clamping force also for moulds INDEX. Year 2004, approx. 58.000 hours. This machine will be delivered re-conditioned (Full checked tested and operative) Ask us about our service of Start up. Lsdpfx Aop At Udekyohf Technical details CLAMPING FORCE 800 kN YEAR OF BUILDING 2004 WORKING HOURS 58.332 SCREW DIAMETER 18 mm horizontal SCREW DIAMETER 30 mm vertical TRAVEL OPENING 457mm INJECTION PRESSURE 2207 BAR (horizontal) INJECTION PRESSURE 1451BAR (vertical) INJECTION VOLUMEN 26cm3 (horizontal) INJECTION VOLUMEN 99cm3 (vertical)

Condition: as good as new (ex-display), Year of construction: 2010, Independent 2nd injection unit DEMAG Multi-plug 80 L for mounting from the side of IMM. Lab machine " like new " Lsdpfx Ajiwx T Eekyehf

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,560 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,235 mm, motor manufacturer: Toyota, battery manufacturer: DIN 43536 type A (Toyota Industrial), battery capacity: 775 Ah, battery voltage: 48 V, fork carriage width: 1,070 mm, fork length: 1,200 mm, fork width: 100 mm, fork thickness: 45 mm, turning radius (inner): 545 mm, turning radius (outer): 2,175 mm, tire condition: 100 %, front tire type: superelastic tires (non-marking), front tire size: 23×9-10, rear tire type: superelastic tires (non-marking), rear tire size: 18×7-8, overall weight: 5,087 kg, total height: 2,235 mm, total length: 3,440 mm, color: orange, Equipment: CE marking, front guard, full service history, head guard, lighting, pallet forks, sideshift, === KEY SPECIFICATIONS === Year: 2024 Operating hours: New / Unused Max. lifting capacity: 2,500 kg Max. lift height: 4.7 m Mast type: Triplex with Free Lift Fork length: 1,200 mm Side shift: Yes (integrated sideshift) Power type: Electric (Toyota AC motor) Transmission: Automatic Cab type: Open Heated cab: No Tyres: Solid Stabilisers: No Lhjdpfexb Tbbex Akysf Engine manufacturer: Toyota Emission class: Electric Weight: approx. 4,300 kg CE certification: Yes === HIGHLIGHTS === Triplex Freelift mast (4.7 m lifting height) Integrated sideshift and 3+4 hydraulic lines LED lights incl. rear working light, BlueSpot, panoramic mirror Mini levers, multifunction display, forks 1200 mm Battery and charger not included === CONDITION === Brand-new, unused forklift – fully tested, fault-free, and ready for operation. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price €39.500 (EXW / excl. VAT). The Toyota Traigo 48 is a reliable, energy-efficient electric forklift with excellent visibility and ergonomics. With its 80V AC motor and Triplex Freelift mast, it provides high performance for demanding indoor applications. All machines are CE-certified, fully inspected and ready for immediate use. Spare parts and professional support available upon request. === DELIVERY === Crane loading available on request for smooth handling at dispatch. Flexible shipping options tailored to your destination and logistics preferences. All shipments handled professionally by the Colle Rental & Sales logistics team.

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Lhedpfx Akeu A Dgreysf Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Year of construction: 2000, For Sale: Set (2x) Diosna SP160E spiral mixers with bottom discharge - Lifting tipper - Linear system with bowl - Diosna electrical cabinet with Siemens control - Fencing / frames - Locks and connections for flour pipelines - Documentation and electrical schematics - Electrical diagrams revised and updated with software in 2021 - Water dosing unit - Weighing hopper - Star hopper All in good condition. Ljdpfx Akjy Egf Rsyjhf For questions, feel free to call. Machine inspection on-site is possible. Price: €125,000 EXW Loading and packaging are included in the price. Transport by arrangement. Subject to typing errors.

Condition: excellent (used), Year of construction: 2007, For Sale: - Set (2x) Diosna SP160E spiral mixers with bottom discharge - Diosna lift tipper - Linear system with bowl - Diosna control cabinet with Siemens control - Fencing / frames - Valves and fittings for flour pipelines - Documentation and electrical diagrams A new bowl drive has recently been installed on Mixer 1. All equipment is in good condition. Ledpfx Aksy Efpueyjhf For inquiries, feel free to call. It is possible to inspect the machine on site. Price: €105,000 EXW Loading and packaging are included in the price. Transport by agreement. Subject to typing errors.

Condition: good (used), Velati Paddle Mixer Manufacturer: Velati Capacity: 1.000 liter Ljdpfey D Nyzox Akyjhf Machine Dimensions LxWxH: 3.000×1.500×2.000 mm Machine Weight: 1.000 kg.

Condition: excellent (used), Year of construction: 2009, grinding length: 1,200 mm, grinding width: 600 mm, total length: 3,500 mm, total width: 1,875 mm, feed length X-axis: 1,320 mm, feed length Y-axis: 730 mm, feed length Z-axis: 480 mm, feed rate X-axis: 1,320 m/min, feed rate Y-axis: 730 m/min, grinding wheel diameter: 350 mm, table length: 1,200 mm, table load: 1,400 kg, table width: 700 mm, Surface grinder LGB France - R12070SM MACH-ID 9600 Make: LGB France Type: R12070SM Year: 2009 X - Travel: 1320mm Y - Travel: 730mm Z - Travel: 480mm Table Length: 1200mm Ledpfx Aoy Edctskyjhf Table Width: 700mm Table load: 1400 Grinding stone dimensions:350 x 50 x 127mm Power: 16kW Speeds: 1500Rpm Length: 3500mm Width: 1875mm Height: 2250mm Weight: 4500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, grinding length: 1,200 mm, grinding width: 200 mm, total height: 2,750 mm, total length: 5,200 mm, total width: 2,700 mm, feed length X-axis: 2,200 mm, feed length Y-axis: 1,240 mm, feed length Z-axis: 630 mm, table length: 2,000 mm, table load: 3,000 kg, table width: 1,200 mm, overall weight: 9,800 kg, power: 20 kW (27.19 HP), grinding wheel speed: 1,200 rpm, Surface grinder LGB France - R-12020 MACH-ID 9599 Make: LGB France Type: R-12020 Year: 2007 X - Travel: 2200mm Y - Travel: 1240mm Z - Travel: 630mm Table Length: 2000mm Table Width: 1200mm Table load: 3000 Grinding stone dimensions:450 x 80 x 127mm Power: 20kW Speeds: 1200Rpm Length: 5200mm Width: 2700mm Lhedpfx Asy Ec Ihskysf Height: 2750mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Deckel Maho Machining Centre 5-Axis Simultaneous Type DMU 80 P Year 1998 Heidenhain CNC With Tooling Ljdpfx Asy D Nfdjkyjhf

Condition: new, Year of construction: 2026, machine/vehicle number: ST-80, functionality: fully functional, pressing force: 80 t, stroke length: 450 mm, operating speed: 4 mm/s, reverse speed: 5 mm/s, table width: 1,000 mm, table length: 1,750 mm, table height: 800 mm, total length: 2,000 mm, total width: 1,750 mm, total height: 1,750 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Model: ST-80 STANDARD DESCRIPTION: Lhsdpey E Iq Usfx Akyef We have designed the ST series of motorized hydraulic presses with a movable gantry and adjustable ram, offering a range of three different capacities from 80 to 150 tons. Specifically designed for straightening welded structures, as well as plates cut by oxy-fuel or laser. The design facilitates easy loading and unloading of large volumes: parts, plates, or structures. It provides access to various pressure points without having to reposition the workpiece, thanks to the lateral movement of the cylinder and the longitudinal travel of the gantry. STRUCTURE AND TABLES: The ST series hydraulic presses feature an electro-welded frame manufactured exclusively from S355JR steel. The frame is stress-relieved and precision-machined after welding to ensure perfect parallelism and accuracy. All structural calculations and design are performed using finite element software. As a result, we always guarantee our high standards of precision and quality. The gantry provides longitudinal movement. CYLINDER AND HYDRAULIC UNIT: Double-acting cylinder with honed barrel, chrome-plated piston, and maintenance-free anti-wear guides. Cylinder operation via a lever hydraulic valve. Equipped with a removable pressure pad to protect the piston. Motorized hydraulic unit with two speeds and automatic switch-off of the fast approach speed at working pressure, including a pressure relief valve. ELECTRICAL SYSTEM AND SAFETY: Electrical circuit includes a motor protection switch with emergency stop. Supplied with a glycerin-filled pressure gauge (reading in tons) and hydraulic oil. Complies with all essential health and safety requirements according to CE standards. Delivered with an operating manual. MODEL ST-80 Capacity (t) 80 Motor Power (kW) 3 Working Speed (mm/s) 3.8 Approach Speed (mm/s) -- Return Speed (mm/s) 4.7 Max. Pressure (bar) 315 Piston Stroke – J (mm) 450 Lower Table (mm) 1,000 x 1,750 Ram Travel – C (mm) 730 Gantry Travel – D (mm) 1,100 Front Opening – A (mm) 1,050 Vertical Opening – B (mm) 500 Working Height – E (mm) 800 Overall Width – G (mm) 2,000 Overall Depth – H (mm) 1,750 Overall Height – I (mm) 2,250 Weight (kg) 1,700

Condition: new, mileage: 500 km, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 9 m³, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, MAN TGS 32.440 8x4 EURO6 GSR NEW with Stetter AM9 FHC Ultra Eco II light GSR – Turn assist system, lane departure warning, emergency brake assist, reversing camera, etc. First registration: without registration Year of manufacture: 2026 Km: 500 Color: Pure White RAL 9010 Other colors available upon request and at additional charge – see photo Technical Specifications: * KW: 324 * HP: 440 * Front tires: 315/80R22.5 * Rear tires: 315/80R22.5 * Gross vehicle weight: 32,000 kg * Emissions standard: Euro 6e * Transmission: Automatic * Wheelbase: 4,300 mm Chassis Equipment: * Cruise control, electronic speed limiter 90 km/h * MAN Tipmatic 12 26DD automatic gearbox * Gearbox functionality: rocking/free burrowing assist * Power take-off (PTO) * Parabolic front springs 7.5t cranked, front axle stabilizer * Parabolic rear springs 10.5t * Rear axle: hypoid * Differential lock on rear axle * Stabilizer on both rear axles * M cab (NN cab) * Fuel tank 300L + 35L AdBlue * Multifunction steering wheel * Front underrun protection * Foldable rear underrun protection * Sun visor * Electric windows * Disc brakes front and rear * ABS * Rear cab wall with window * MAN Media System Navigation Advanced 7” incl. Bluetooth (Europe navigation) * MAN sound system * Air-suspended driver comfort seat with seat heating * MAN Easy Control panel, 2 functions, operable from outside when the door is open * Central storage console * Interior color ambient: Moon Grey * Digital tachograph DSRC, Conti make * LED daytime running lights, stone guard grille for front headlights * Reversing camera * Preparation for beacons * Toll Collect system preparation * CB radio preparation with antenna on cab roof * Central locking * ROCKINGER SK5 towing coupling * Air conditioning, Climatronic * 12 t jack * Emergency brake assist EBA * Turn assist system * Traffic sign recognition * AttentionGuard driver distraction warning (non-switchable) * Preparation for alcohol interlock breathalyzer Superstructure Equipment * Stetter AM 9/8 FHC Ultra Eco II light line * Nominal capacity: 9 m³ ready-mixed concrete * PMP transmission * Water tank 500 L * Smooth aluminum mudguards rear axle * Mudguard extensions * Foldable underrun protection * Transitional piece * Additive pipe 5 m * Manual mixer control * Emergency stop button * Frame cover Lhedpfxsu Dfqze Akyof * Retaining flap for swivel chute * Additive system 42 liters, plastic * LED working lights Technical specs (EN): * KW: 324 * HP: 440 * Front Tires: 315/80R22.5 * Rear Tires: 315/80R22.5 * Total Weight: 32,000 kg * Emission Class: Euro 6e * Transmission: Automatic Chassis Equipment (EN): * Power take-off (PTO) * Cruise control * MAN Tipmatic 12 26DD automatic gearbox * Gearbox option: free burrowing * M cab * Front springs 7.5t * Rear springs 10.5t * Rear axles: hypoid * Front underrun protection * Foldable rear underrun protection * Multifunction steering wheel * Sun visor * Electric windows * Disc brakes front and rear * ABS * Primary fuel filter * MAN Media System Navigation Advanced 7" with Bluetooth (Navigation Europe) * MAN sound system * Rear window in cab * Air-suspended driver comfort seat with seat heater * MAN Easy Control panel, operable from driver's door * Storage box * Moon Grey interior color * LED daytime running lights * Stone guard grille front headlights * Fuel tank 300 l + AdBlue 35 l * Central locking * Towing coupling

Condition: new, mileage: 500 km, power: 315 kW (428.28 HP), fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, loading space volume: 9 m³, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, Mercedes Benz Arocs 3243B 8x4 EURO6 GSR with Stetter AM9 FHC Ultra Eco Light GSR - Turn Assist, Lane Departure Warning, Emergency Brake Assist, Reversing Camera, etc. First registration: None / without registration Year of production: 2026 Km: 500 Colour: Arctic white Also available in your desired color for an additional charge (see photo) Technical Data • 315 kW • 428 HP • Front tires: 315/80R22.5 • Rear tires: 315/80R22.5 • Gross weight: 35,000 kg • Mileage: 500 km • Emission class: Euro 6e • Transmission: Mercedes Powershift 3 automatic • Condition: New vehicle Chassis Equipment • M ClassicSpace cab • Wheelbase: 4250 mm • Engine type: Euro 6e • Front axle, straight design, 7.5 t • Rear axle, hypoid, 10 t, 390 mm ring gear • Fuel tank: 320 L aluminum, plus 25 L AdBlue • Sun visor • Air conditioning • Disc brakes front and rear • Compressed air tanks in aluminum • ABS • Light sensor • Central locking system • Multimedia Cockpit, interactive 2 • Preparation for Remote Truck 3.0 App • 2 remote control keys (extra) • Navigation system • FMS fleet management interface • Reversing camera • Rear warning system • Digital tachograph, 2nd generation • Roof hatch • Driver’s comfort suspension seat, premium flat fabric • Comfort cab suspension, steel-sprung • LED daytime running lights • LED fog lights • Construction rear lights • Cruise control • Lane Keeping Assist • Attention Assist • Traffic Sign Assist • Active Brake Assist 6 • Active Sideguard Assist 2 • Frontguard Assist Superstructure Equipment • Stetter AM 9/8 FHC Ultra Eco Light line • Nominal volume: 9 m³ ready-mix concrete • PMP gearbox • 500 L water tank • Aluminum mudguards on rear axle • Folding underride guard • Transition piece • 5 m admixture pipe • Manual mixer control • Emergency stop button • Frame cover • Retaining flap for swivel chute • 42 L plastic admixture system • Work lights Lhedpsvl N Icjfx Akysf Non-binding offer EXW Cologne. Subject to prior sale and errors excepted. Sale to business customers only. We speak German – We speak English – Hablamos Español – Nous parlons français

Condition: new, The double-sided cantilever rack by BLT, with a height of 315 cm, is ideally suited for storing medium-weight long goods such as profiles, pipes, and bars in warehouses, workshops, or craft businesses. With an approximate rack length of 5.12 m, a usable depth of around 80 cm, and a total of 5 levels per side including the base level, this cantilever rack offers clearly arranged and easily accessible storage space for long and bulky items on both sides. Each cantilever arm can support up to 500 kg, and each upright can handle up to 1,800 kg per side. The bolt-on cantilever arms with deflectors ensure robust and practical use in day-to-day operations. Made in Germany. Freight within Germany already included, plus VAT. Product details: - Rack type: Double-sided cantilever rack - Height: approx. 315 cm - Length: approx. 5.12 m - Total depth: approx. 174 cm - Bay width: approx. 128 cm - Cantilever arms: approx. 80 cm usable length (IPE80) - Usable depth of base level: approx. 80 cm - Load per arm: max. 500 kg (with even load distribution) - Load per upright: max. 1,800 kg per side (without base level, with even load distribution) - Levels per side: base + 4 storage levels (5 levels per side total) - Design: Double-sided, bolt-on cantilever arms with deflectors - Upright profile: IPE140 - Cantilever arm profile: IPE80 - Colour finish: RAL 7016 - Manufacturing: Made in Germany - Delivery: Freight within Germany included, plus VAT Scope of delivery: - 5 × uprights made from IPE140, height approx. 3,150 mm - 40 × cantilever arms, approx. 80 cm length, made from IPE80 - Including mounting hardware - Including heavy-duty anchors for floor fixing Advantages of the BLT cantilever rack: - Ideal for storing medium-weight profiles, pipes, and bars - Double-sided design for storage space accessible from both sides - Bolt-on cantilever arms with deflectors - 5 levels per side, including base, for optimal use of storage space - Up to 500 kg load capacity per arm and up to 1,800 kg per upright per side - Secure floor anchoring with supplied heavy-duty anchors - Made in Germany - Freight within Germany included Delivery: - Freight within Germany included Ledpfx Asy D Sq Njkyshf - Delivery includes mounting hardware - Secure floor anchoring with supplied heavy-duty anchors Enquiries & custom planning: Take advantage of our personal consultation for your individual storage solution. Inform us of your required dimensions, stored goods, and available space. Our experienced consultants are happy to provide you with a non-binding offer featuring custom planning and structural calculation for your bespoke cantilever racking system. Use our enquiry list or contact us directly by phone. Together, we will plan your tailor-made racking system.

Condition: new, Year of construction: 2022, 28.55 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 28.55 running meters Shelf offer consisting of: Lhsdey D Iz Dopfx Akysf - 16 x frame approx. 200 x 80 cm, disassembled. - 90 x crossbar approx. 185 cm. - 45 x support shelf approx. 184.5 x 79.5 cm. - 90 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2887,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 13.35 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 13.35 running meters Shelf offer consisting of: - 08 x frame approx. 200 x 80 cm, disassembled. - 56 x traverse approx. 185 cm. - 28 x support shelf approx. 184.5 x 79.5 cm. - 56 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1724,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Lhedpfx Akoy D Izweysf

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - H : approx. 200 cm - D : approx. 80 cm - L : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 240 x traverse approx. 185 cm. - 120 x support shelf approx. 184.5 x 79.5 cm. - 240 x joist / load distributor. Lhjdpfxsy D Iy Hs Akyjf - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 7267,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 180 x traverse approx. 185 cm. - 090 x support shelf approx. 184.5 x 79.5 cm. - 180 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5737,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : Lhodpjy D Iymefx Akysf If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 1,000 kg, Equipment: CE marking, saw blade guard, scorer, For sale is a robust and proven Altendorf WA 80 panel saw, ideal for joineries, carpentries, and industrial use. Equipment & Highlights: + Scoring unit (for chip-free cuts on coated panels) + Sliding table: approx. 3200 mm + Duplex fence (usable on both sides, high precision) + Double roller carriage with STEG – secondary support for optimal workpiece guidance + Main motor: 5.5 kW + Heavy-duty cast iron table for vibration-free operation Technical Details: + Saw blade diameter: up to approx. 400 mm (without scoring unit) + Saw blade tilting 0-45°, electrically adjustable + Saw blade height adjustment, electric + Max. cutting width at rip fence right: 130 cm + 3 speeds: 3000 / 4000 / 5000 rpm + Scorer independently adjustable in height and lateral position + Weight: approx. 1000 kg Condition: Used, but in good, fully functional condition. Machine is ready for immediate use. Lhedpfxoy Eyblj Akysf Special Features: The combination of the long sliding table, duplex fence, and double roller carriage with additional support makes this machine ideal for precise and comfortable processing of large panels. Price: €7,500 net without Duplex / €8,500 net incl. Duplex Location: 39340 Haldensleben Inspection: possible anytime by appointment Please feel free to contact us if you have any questions.

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor -Manufacturer: Nord, flat geared motor Ljdpfxjy D Hups Akyohf -Type: SK 2080A-80 L/4 i= 10.27 -Speed: 135 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW -Hollow shaft: Ø 30 x 100 mm -Protection class: IP54 -Dimensions: 340/310/H215 mm -Weight: 22.7 kg

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor -Manufacturer: Nord, flat geared motor -Type: SK 2080A-80 L/4 i= 10.27 -Speed: 136 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW -Hollow shaft: Ø 30 x 100 mm -Protection class: IP54 -Dimensions: 320/290/H205 mm -Weight: 20 kg Lsdpot E D Exjfx Akyjhf

Condition: refurbished (used), Year of construction: 2010, The machine is in the process of overhaul. Delivery time on request. Information: Hopper capacity: 380L Weight:1200KG Width:1380 mm Depth:1040 mm Height:1330 mm Frequency:50 Hz Rated power:19 kW Lhsdeh Rdz Hjpfx Akyef Total rated current:40 A Fuse protection (recommended) 3 x 50 A gL. Speed working auger:180/360 rpm Speed feeder screw:19/38 rpm Speed mixing shaft:9.5/19 rpm Errors excepted and subject to prior sale. All information is non-binding. The correctness and accuracy of the information and prices contained are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.