Used Komatsu Wa500-8 for sale (35,955)

Condition: as good as new (ex-display), functionality: fully functional, sheet thickness (max.): 8 mm, overall weight: 6,500 kg, Used plate shear from Luther Werke. Capacity: 2500 x 8 mm Deep throat: 50 cm Dsdpfx Akez Hbtgjmswc Sold as is, where is. Weight: 6500 kg

Condition: excellent (used), Year of construction: 2007, PROD. CREEMERS TYPE RCD30/8 S/N CAI242107 YEAR 2007 Dodpfoz E Ht Nox Akmswc POWER (kW) 30 OUTPUT (m3/min) 3.54 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 10385/17245 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate Dwsdpfx Aju Idxrjkmec - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: excellent (used), CATALOGUE NUMBER 8010 TECHNICAL DATA Equipment: - platen Dedpozw Dx Ajfx Akmewc - pre-milling - strip feeder - 2 glue tanks: for granules and cartridges - hot melt glue (granules) currently in the machine - guillotine – pre-trimming of the veneer - 3 pressure rollers - 2 trimming units with saws for final trimming - 2 milling units for edge profiling (radius milling cutters) - corner rounding unit - edge sanding units – for removing excess glue - polishing units - stepless feed speed adjustment 8-18mm - workpiece thickness 6-45mm - min workpiece length 180mm - min workpiece width 600mm - max thickness of veneer fed from a roll 3mm - air consumption 6-8 bar - diameter of dust extraction nozzle 7x80mm, 1x130mm - dimensions L/W/H 6650x1260x1700mm - weight 1850kg ADVANTAGES - German production - spray system - pre-milling and corner rounding - 2 glue tanks - 4 additional milling cutters included - unpainted - original technical documentation + CE - very good condition - used veneer edging machine Net price: 49900 PLN Net price: 11605 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 7.5 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,055 kg, empty load weight: 1,945 kg, loading space volume: 10.4 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 6,000 mm, Price available upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible for multiple container purchases. Europe-wide delivery possible upon agreement. Dedpfxjz E Ncto Akmowc *Leasing/hire purchase possible!* 3 units available in stock, RAL 7043 Technical description: Other models and sizes available from the Paderborn warehouse. You can view our stock on our website. Roll-off container according to DIN *Internal dimensions: 6000 x 2300 x 750 mm *Usable volume: 10.4 cbm *Unladen weight: 1945 kg *Base 5 mm S235 *Side walls 3 mm S235 *End wall angled upwards *All sheets and profiles continuously welded *Double-wing door with safety lock *Standard ladder according to UVV, screwed on, galvanized *8 lashing eyes in the base plate, load-bearing up to 2.5 tons *Container tested and approved according to DGUV rule 114-010 *Base-side wall connection 90° *Stringers made of U 90x55x4 mm *Stringer spacing 750 mm *Hook diameter 50 mm, S355 *Hook height 1570 mm *Top frame round tube Ø 89 mm *Mesh hook *All moving parts lubricatable *Steel guide rollers 159×6.3, length 300 mm *Warning markings according to DIN 67520 *Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) *Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: new, length 1200 mm width 600 mm height over floor 860 mm dimensions 1200 x 600 x 400 m weight 49 kg Workbench with 5 drawers and solid wood worktop Dimensions 1200 x 600 x 870mm Drawer dimensions (internal) 430 x 400 x 110 mm Dsdpfxsu Imdqj Akmjwc

Condition: good (used), mileage: 186,970 km, power: 390 kW (530.25 HP), first registration: 05/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 5,990 mm, total width: 2,530 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2024, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking heater, power mirror, retarder, spoiler, = Additional Options and Accessories = - Adaptive Cruise Control - Automatic Headlights - Sunroof - Roof Spoiler - Euro 6 - Driver Airbag - High Beam Lights - Height-Adjustable Steering Wheel - Air Conditioning - Leather Steering Wheel - Air Suspension - Air Horn - Radio DAB MP3 Bluetooth 4.0 - Radio with MP3 Support - Rain Sensor - Headlight Washer System - Sleeper Cabin - Sun Visor - Auxiliary Heater = Additional Information = Technical Information Number of Cylinders: 6 Engine Displacement: 12,777 cc Front Axle: Alloy Wheels; Max. Axle Load: 8,000 kg; Steered Rear Axle: Dual Tires; Differential Lock; Alloy Wheels; Max. Axle Load: 11,500 kg Weights Unladen Weight: 8,253 kg Payload: 12,747 kg GVW: 21,000 kg Interior Upholstery: Leather Maintenance, History and Condition APK (Technical Inspection): Valid until 05/2027 Technical Condition: Good Optical Condition: Good Dsdpfx Akjxixk Domewc Identification License Plate: 87-BXP-8

Condition: used, mileage: 584,000 km, power: 228 kW (309.99 HP), first registration: 05/2005, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: mechanical, loading space length: 4,400 mm, loading space width: 2,420 mm, loading space height: 700 mm, Equipment: ABS, all wheel drive, MAN TGA 18.310 BB 4x4 all-wheel drive. Meiller 3-way tipper with steel sideboards. Dimensions: 4x40x2.42x0.70 m. Wheelbase 3.60 m. 8-speed transmission with splitter. Differential locks, central locking, radio/CD, ABS, engine brake, trailer hitch with air, electricity, and 2x oil connections, cruise control, 2x electric windows, electric mirrors, =tachograph with tachograph disc= sun visor, 2x rotating beacons, metal bumper, rear wall with window, toolbox, air filter facing upwards. Repair invoices from 2024 to 2026 totaling approximately 28,000 EUR. =====German registration===== Djdpfjz H Ehbox Akmowc ==Daily purchase of commercial vehicles, as well as trade-ins possible==. Price: 24,800 EUR net.

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. Dodpfx Aeu Imptekmjwc 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: new, 8 St. range L-W-H 710 x 510 x 900 mm weight 67 kg Schubladen schrank mit 8 Schubladen Schubladenabmessung 600 x 435mm Schubladenhöhe: Lade 1 - 8, 81mm Dwsdsvblhqopfx Akmec

Condition: new, Year of construction: 2026, machine/vehicle number: PB16040, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table width: 100 mm, table length: 4,000 mm, table height: 850 mm, throat depth: 400 mm, ram plate width: 1,900 mm, ram plate length: 4,000 mm, distance table to ram: 3,500 mm, clearance between the columns: 3,500 mm, oil tank capacity: 400 l, total length: 4,500 mm, total width: 2,000 mm, total height: 2,650 mm, overall weight: 12 kg, Equipment: CE marking, safety light barrier, High-end electro hydraulic servo system, upper slider controller by the full loop synchronization. Main servo motor guaranteed high efficiency, lower noise, energy saving. Mechanical compensation on crowning of worktable and deformation compensation on throat, ensuring bending strength and precision. Qualified accessories used to ensure press brake’s long-term stability running. Ball screw and linear guide adopted to ensure accurate and fast backgauge. Movable front support helps with bending convenience. 2D and 3D multifunctional CNC system from Delem and Cybelec. Equipped with side guards and closed rear guards. 8+1 axis/6+1 axis control European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 4000 mm 3 Worktable height 850 mm 4 Distance between vertical 3500 mm 5 Stroke 250 mm 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1 Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m Dsdpfx Aey U Hmgskmjwc 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: used, mileage: 584,000 km, power: 228 kW (309.99 HP), first registration: 05/2005, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: mechanical, loading space length: 4,400 mm, loading space width: 2,420 mm, loading space height: 700 mm, Equipment: ABS, all wheel drive, MAN TGA 18.310 BB 4x4 all-wheel drive. Meiller 3-way tipper with steel sideboards. Dimensions: 4x40x2.42x0.70 m. Wheelbase 3.60 m. 8-speed gearbox with splitter. Differential locks, central locking, Dsdpoz H Eg Refx Akmowc radio/CD, ABS, engine brake, trailer hitch with air, power, and 2x oil connections, cruise control, 2x electric windows, electric mirrors, =tachograph with tachograph disc= sun visor, 2x rotating beacon, metal bumper, rear wall with window, toolbox, air filter positioned above. Repair invoices from 2024 to 2026 totaling approximately 28,000 EUR. =====German registration===== ==Daily purchase of commercial vehicles, as well as trade-ins possible== Price: 24,800 EUR net.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 13,575 h, load capacity: 2,500 kg, lifting height: 4,500 mm, fuel type: gas, mast type: simplex, construction height: 2,860 mm, fork carriage width: 1,120 mm, fork length: 1,350 mm, empty load weight: 4,520 kg, total length: 2,650 mm, drive type: Treibgas, construction width: 1,150 mm, Internal combustion forklift Load center: 500 ISO class: Pin-type Mast type: Standard Transmission: Automatic Technical condition: good Front tire type: Pneumatic Front tire size: 2 x 7.00-12 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 2 x 6.00-9 Rear tire condition: 80 - 100% Djdpfjz Hnuwjx Akmowc Battery year of manufacture: 2015 Triple auxiliary hydraulics, integrated fork positioner with side shift, hydraulic fork extension (integrated), load guard, full cabin, heater, air conditioning, hydraulic fork extension (integrated), blue spot, dust protection, gas tank, lighting according to StVZO (German Road Traffic Licensing Regulations), 2 work lights at the front.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,255 h, load capacity: 1,800 kg, lifting height: 3,300 mm, free lift: 1,530 mm, fuel type: gas, mast type: duplex, construction height: 2,140 mm, fork carriage width: 920 mm, fork length: 1,200 mm, empty load weight: 2,980 kg, total length: 2,350 mm, drive type: Treibgas, construction width: 1,050 mm, Internal combustion forklift Load center: 500 ISO class: FEM 2 A Mast type: Duplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 6.50-10 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 5.00-8 Rear tire condition: 80 - 100% Djdpfx Akoz Hnu Domewc Battery year of manufacture: 2018 Additional hydraulic circuit, integrated side shifter, cabin with heater, double pedal, 2 work lights at the front, 1 work light at the rear.

Condition: used, Year of construction: 2000, Machine description This used Partenair S.MAX40/AC refrigerated compressed air dryer, built in July 2022 by Friulair, handles a nominal flow of 366 m³/h. It runs on single-phase 230 V, 50 Hz, draws 0.82 kW and uses R407C refrigerant. Maximum working pressure is 14 bar. The DMC 35 controller shows the dew point on an LED bar. A one-piece aluminium heat exchanger and an electronic condensate drain complete the unit. Dimensions: 555 x 580 x 885 mm, weight 54 kg. Applications This second-hand air dryer removes moisture from compressed air downstream of a screw or piston compressor of about 40 hp. It protects pneumatic tools, cylinders, valves and air networks in mechanical workshops, sheet metal shops, woodworking, packaging and paint lines (food processing with suitable filtration). Key features / Advantages Dsdsz H Ny Ijpfx Akmswc Proportional capacity control keeps the dew point stable at any load. Pressure drop is low, below 150 mbar on average according to the manufacturer. The compact, light unit connects in 1.5 inch BSP and plugs into a single-phase supply. Friulair is a well-known Italian dryer manufacturer, sold in France under the Partenair brand. The 2022 build year and clean appearance make resale and installation easy. Used refrigerated air dryer for sale at All Metal, specialist in used industrial machinery. Height: 130 Length: 80 Depth: 160

Condition: excellent (used), I will sell a DDR motor pump. - 800l/min - 28PS. - Very good condition. Dwsdpfjv Nrf Eox Akmoc

Condition: used, mileage: 127,000 km, power: 353 kW (479.95 HP), first registration: 03/2016, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro6, Equipment: crane, soot filter, Crane: ----- Retarder – Air conditioning – Steerable axle – Fifth wheel coupling and outriggers – Fassi 990, year of manufacture 2015, 8 extensions and fly jib – Front support – 8,200 crane operating hours – Manual transmission Suspension: Leaf spring – Air suspension Dwodpfxsz E Ugqe Akmjc

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 2,025 h, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, fork carriage width: 920 mm, fork length: 1,200 mm, empty load weight: 3,703 kg, total length: 2,250 mm, drive type: Elektro, construction width: 1,150 mm, Electric four-wheel forklift Load center: 500 Fork width: 120 mm Fork thickness: 35 mm ISO class: FEM 2 A Dodpfx Akoz If Azemswc Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 200/500-10 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 16x6-8 Rear tire condition: 40 - 60% Battery voltage: 48V Battery capacity: 750Ah Battery year of manufacture: 2016 Additional single hydraulic circuit + 4th valve, side shifter, battery, charger, cabin with heater, blue spot light, full free lift, 2x front work lights, 1x rear work light.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,473 h, load capacity: 1,800 kg, lifting height: 4,700 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork carriage width: 920 mm, fork length: 1,000 mm, empty load weight: 3,501 kg, total length: 2,100 mm, drive type: Elektro, construction width: 1,130 mm, Electric 3-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 352 mm ISO class: FEM 2 A Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 18x7-8 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 140/55-9 Rear tire condition: 40 - 60% Battery voltage: 48V Battery capacity: 750Ah Battery year of manufacture: 2020 Double auxiliary hydraulics, side shifter, full free lift, battery 11/2020, charger, 2 work lights (front) Dwedpfjz If Absx Akmoc

Condition: good (used), 8-position tool turret, manually indexable, for retrofitting 8 x turning tool holders 8 x drilling tool holders Dwsdpfx Akswg Rv Nomsc Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, mileage: 106,092 km, power: 140 kW (190.35 HP), first registration: 04/2023, fuel type: diesel, next inspection (TÜV): 03/2027, color: black, gearing type: automatic, emission class: euro6, number of seats: 8, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, soot filter, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer a well-maintained vehicle for sale. If you are interested in this vehicle, please feel free to contact us by phone or email to arrange a viewing appointment. The vehicles are not always immediately available on our premises. Dwjdpez Iu Tisfx Akmoc Special equipment: Lighting in the grab handle in the rear with reading spotlight, interior design package, brushed aluminum sports pedals, seat cover/upholstery: Lugano leather, seats in the driver's cab: comfort driver's seat, seats in the driver's cab: comfort passenger seat, driver assistance system: Live Traffic information system, interior trim: double-stripe decorative elements, Intelligent Light System LED, LED rear lights, rear automatic climate control (Tempmatik), comfort automatic climate control Thermotronik, interior filter: pollen filter, light alloy rims 7x17 (5-spoke), metallic paint, multimedia system MBUX (touchscreen 10.25"), hands-free system Bluetooth, WLAN hotspot, navigation system for multimedia system MBUX, parking package, Parktronic system (PTS), PRE-SAFE system, sliding door loading/passenger compartment left, sliding door left electric, sliding door right electric, seats in the driver's cab: heated driver's seat, seats in the driver's cab: heated passenger seat, seats in the loading/passenger compartment: 1st row, 3-seater comfort bench, seats in the loading/passenger compartment: 2nd row, 3-seater comfort bench, mirror package, exterior mirrors electrically foldable, exterior mirrors with ambient lighting, interior and exterior mirrors on the left with automatic dimming, sockets (12V connection) in the loading/passenger compartment, 2x, tinted rear window/black glass, auxiliary heater (hot water). Additional equipment: Adaptive brake light, airbag passenger side, airbag driver side, trailer coupling: electrical system for trailer socket, indicator for windshield washer fluid level, armrests in the passenger compartment, exterior mirrors aspherical, both, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, outside temperature display, lighting in the grab handle in the rear, BlueEfficiency package, start/stop system engine, floor covering: carpet in the driver's cab, floor covering: carpet in the loading/passenger compartment, brake system with ABS+ASR, DAB tuner (digital radio reception), headliner/interior trim fabric gray, automatic activation of headlights, rear grab handle, entry lights, driver assistance system: breakdown management, windows for rear doors/tailgate with wiper/washer system, windows in the loading/passenger compartment: - fixed, rear, windows in the loading/passenger compartment: - fixed, front left, windows in the loading/passenger compartment: - fixed, front right, parking brake electric, sliding door lock (active), seat belt pretensioners, grab handles in the rear, glove compartment lockable, urea tank (AdBlue): 24 liters, tailgate with window, heated rear window, body/structure: bus, body/structure: extra long, child lock, instrument cluster with color display, comfort chassis, comfort lighting in the passenger/loading compartment, communication module Mercedes me connect (internet-based services), head airbag system (window bag), head-shoulder airbag (thorax bag) driver/passenger side, fuel tank: main tank 57 liters, steering wheel (steering column mechanically adjustable), steering wheel with multifunction buttons

Year of construction: 2021, condition: new, modular drilling machine 8 automatic units Do: Go mad Model: Wu 3g 2C 3T Description: Producer GOMAD Benh7jc8jp Year of production 2021 Machine category Modular drilling machine location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Shipping costs Dodpfx Aehara Djkmewc Client protection Start type to be agreed Description Remarks MODULAR MODULAR DRILL, TRAILER SLIDING BLADE, HALF-ADAPTATION WITH AIR PEDAL DRILL EQUIPMENT Year: 2021 THE NEW VERSATILE DRILLING MACHINE

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, 4-sided 8-head planer. Dwodpfevtpk Hox Akmec head arrangement: lower horizontal, right vertical, left vertical, upper horizontal, right vertical, lower horizontal, upper horizontal, and the last universal, a new inverter and new cables were installed, smooth feed regulation. The machine has been completely renovated. Weight 4600 kg

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 14 kg, permissible axle load (axle 2): 14 kg, permissible axle load (axle 3): 14 kg, loading space length: 21,200 mm, loading space width: 2,750 mm, loading space height: 1,240 mm, total length: 21,200 mm, total width: 2,750 mm, total height: 1,240 mm, suspension: hydraulics, tire size: 285 / 70 R19.5 (150/148J), color: blue, Year of construction: 2012, Colour: Blue Payload weight: 110,550 kg Extendable Main Features Manufacturer: Goldhofer Type: THP / XLE 8 (3+5) Low Loader Chassis number: WG0THPX57B0030736 VIN Gooseneck: WG0SH0005B3030736 VIN XLE 3: WG0XLE034B0035242 VIN XLE 5: WG0THPX57B0030736 Year: 2012 Weights/Loading Capacity King-Pin load: 27,000 kg Axle load: 14,000 kg Total axle load: 8 x 14,000 kg = 112,000 kg GVW: 139,000 kg Empty weight: 28,450 kg Loading Capacity: 110,550 kg Axles BPW Pendle Axles Axle distance: 1360 mm / 1400 mm EBS/ABS Tyres: 285 / 70 R19.5 (150/148J) Hydraulic steering and suspension Radio remote control Dimensions Total length: 21,200 mm Loading floor length: 6,000 mm Loading floor extension: 8,500 mm Max loading floor length: 14,500 mm Loading floor thickness: 450 mm Loading floor clearance: 200 mm Loading floor width: 2,750 mm / 3,250 mm Bogie width: 2,750 mm Bogie height: 1,240 (+/- 300) Excavator boom recess: 700 mm Additional Information Hydraulically operated via truck PTO King pin 3.5” Central lubrication Remote control operated Detachable gooseneck Hydraulic quick couplings Marker boards for oversized loads Working lights Orange warning light Ramps for loading onto the floor Extra tables for extending the loading floor = Further Information = General Information Year of manufacture: 2012 Axle Configuration Tyre size: 285 / 70 R19.5 (150/148J) Axle brand: BPW Suspension: hydraulic suspension Dwjdpfx Aoxx Sv Eokmec Mid-axle 1: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Mid-axle 2: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Mid-axle 3: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Rear axle 1: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Rear axle 2: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Rear axle 3: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Rear axle 4: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Rear axle 5: Dual-tired; Lift axle; Max. axle load: 14 kg; Steerable Weights Empty weight: 28,450 kg Payload: 110,550 kg GVW: 139,000 kg Condition Technical condition: good Optical condition: good Financial Information Price: On request

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC-Steuerung Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement. Dodpjzx Nxdsfx Akmowc