Used Length Stop for sale (35,123)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg Ncedpfxswc Rk Es Ac Teu ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Njdpjwc Ri Isfx Ac Tecu Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Available in working lengths of 3000 - 4500 - 6000 and 7000 mm lengths Reversible Left or Right direction Anodised aluminium profile 105x 90 mm Reinforced 32 mm toothed belt Single phase motor 6 Nm 115 - 230 v Positioning speed 60 m/min Ncedpsn Nv Ugefx Ac Teu Repeat precision +/- 0.1 mm Smart 7 touch screen colour control unit 7" display 3 working mades Manual for Absolute or Incremental working, Preset with 8 pre set positions and Automatic cutting list mode, USB port for importing cutting lists

Condition: new, The Stromabstop Automatic Positioning System is crafted from years of industry experience in manufacturing fully automatic crosscut saws. Designed for ease of use and compatible across various applications, the Stromabstop applies precision cutting without the hassle of measuring and marking. With consistent accuracy, this intuitive positioning stop streamlines operations, whether for cutting, drilling, or other tasks. Programming is effortless with a user-friendly touch screen control panel, with USB connectivity for seamless importing of cutting lists. Optional optimisation software further enhances efficiency, making the Stromabstop the ultimate solution for precise, hassle-free positioning in your workflow. Ncjdpfxjriuutj Ac Teu Available in working lengths of 3000 - 4500 - 6000 and 7000mm* *generally available from stock in 3000, 4500 and 6000mm lengths Reversible left or right direction Anodised aluminium profile 105 x 90mm Reinforced 32mm toothed belt Single phase motor 6 Nm 115 - 230v Positioning speed 60m/min Repeat precision +/- 0.1 mm Smart 7" touch screen colour control unit 3 working modes: MANUAL for absolute or incremental working / PRESET with 8 pre set positions and AUTOMATIC cutting list mode USB port for importing cutting lists

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted Ncjdewc Afhspfx Ac Tsu SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, 3000 mm Working width 360 mm roll diameter 60,0 mm weight max. in kg 900 kg height adjustment 620 - 1055 mm weight 107 kg Furnishing: - Outfeed roller conveyor with stop - Optimal aid for supporting long and heavy workpieces Nsdpfx Acoxaai Ae Tecu - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces

Condition: new, 3000 mm Working width 360 mm roll diameter 60,0 mm weight max. in kg 900 kg height adjustment 620 - 1055 mm weight 66 kg Description: The RB 10 roller conveyor is a particularly practical aid for the support and movement of long and heavy workpieces. It can be used individually and expanded as required and through the retrofittable PVC-coated rollers can also be used for delicate materials. Furnishing: - Infeed roller conveyor - Optimal aid for the support of long and heavy workpieces - Roller support steplessly height adjustable and clampable Nedpfxoxaaf De Ac Tecu - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers

Year of construction: 2008, condition: used, machine/vehicle number: A0807010-1200, Technical specifications: - Manufacturer: Venjakob - Model: H - Working width: 1,300 mm - Length: 21,500 mm - Total width: 1,510 mm - Feed speed adjustable via frequency inverter - Frequency inverter not included in delivery - Height: 900 ± 50 mm - Motor power: 0.81 kW Ncodpsyh Hwzofx Ac Tou - Motor ATEX-compliant - Belt control, pneumatic - Max. load: 70 kg/m - Colour: RAL 7035 light grey - Voltage fluctuations: ±5% - Location: in stock

Year of construction: 2008, condition: used, machine/vehicle number: A0807010-0400, Technical data: - Manufacturer: Venjakob - Type: H (UV) - Working width: 1,300 mm - Length: 2,500 mm - Total width: 1,510 mm - Feed speed adjustable via frequency converter - Frequency converter not included in delivery - Conveyor belt suitable for ambient temperature up to approx. 120°C Nsdeyh Hu Tjpfx Ac Tscu - Height: 900 ± 50 mm - Motor power: 0.75 kW - Motor ATEX-compliant - Belt control: pneumatic - Max. load: 70 kg/m - Colour: RAL 7035 light grey - Voltage fluctuations: +/-5% - Location: in stock

Year of construction: 2014, condition: used, machine/vehicle number: DB407803A, Technical data: - Manufacturer: Cefla - Type: TR 3000 - With own control cabinet - Feed speed adjustment ~ 2,2 - 20m/min. - Emergency Stop - Display converter - Year of manufacture: 2014 - Transport length: 3,000 mm - Working width: 1,300 mm - Roller length: 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 65 mm Njdjyatdzopfx Ac Tocu - Roller pitch: 125 mm - Adjustable feed (manual): 3-15 m/min - Installed power: 0.8 KW - Location: in storage

Year of construction: 2005, condition: used, machine/vehicle number: A050500 / 0200, Technical data: - Manufacturer: Venjakob - Type: H - Length: 3,000 mm - Belt width: 1,300 mm - Total width: 1,510 mm Ncsdpfjxywnpex Ac Teu - Year of manufacture 2005 - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz - Frequency converter required on site - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.55 kW *Image not original, only example image*

Condition: new, Roller conveyor length 6000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 160 kg length in width 620 mm length in total 6000 mm Roller conveyors without stop system. Nedpfxjf Nb Eie Ac Tecu Stable execution. are available from 2 to 6 meters in length.

Condition: new, Roller conveyor length 2000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 55 kg length in width 620 mm length in total 2000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. Nsdpfofv Aryjx Ac Tscu

Condition: new, measuring length bis 5700 mm Tube length 6000 mm numbers of toolholders 7 Rohr Edelstahl dimensions 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the Ncedpfjfv Atljx Ac Tju settings precisely desired length. Danger: This is just the stop system without roller conveyor!

Condition: new, Roller conveyor length 4000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 110 kg Ncodpfx Acefv Ar Ij Teu length in width 620 mm length in total 4000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length.

Condition: new, Roller conveyor length 5000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm Ncsdpfjfv Ar Ssx Ac Tju roll diameter 60 mm work height adjustable 840 - 950 mm weight 140 kg length in width 620 mm length in total 5000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length.

Condition: new, Roller conveyor length 3000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 95 kg length in width 620 mm Ncsdpofv Ar Djfx Ac Tou length in total 3000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 77731, Band Slicing Machine Kronen GS 10 This band slicer with an extended infeed belt from Kronen is ideal for slicing vegetables and fruit. Thanks to the wide range of blades, the machine can cut slices, strips, and cubes. It is also possible to “slice” pulled meat using the specially designed pulled-meat knife. Ncedpfox A Sg Esx Ac Tju This slicer is highly suitable for salad, (leafy) vegetables, fruit, herbs, meat, fish, sausage, bread, cheese, nuts, and much more. It is ideal for use in large kitchens, catering, fresh-produce specialty shops, and industrial applications. Various cutting accessories are available for a wide range of applications. The easily adjustable control panel allows for quick product changes. The belt speed and blade speed are infinitely adjustable (frequency-controlled), enabling even delicate products to be cut effortlessly. This industrial slicing machine is made entirely of stainless steel. Specifications: • Production capacity: 1500 kg/h (depending on product and cut size) • Working width: 125 mm • Cut size: 1 mm – 45 mm • Cutting types: slices, strips, cubes, grating, pulled meat • Included blade: slicing blade 4 mm • Infeed height: 890 mm • Outfeed height: 610 mm • Voltage: 230V (3+N, 50Hz) • Power: 1.8 kW • Weight: 260 kg • Machine dimensions (W x D x H): 2530 × 650 × 1390 mm

Condition: good (used), SEF LR 3 Fiber Laser Scanner Box SEF LR 3 Fiber Laser Scanner Box Heidenhain LC 18 Encapsulated Linear Encoder Measuring Length: 2240 mm Nodpfxexqzu Ij Ac Tscu Accuracy: +/- 5.0 µm Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed Nodpfsw A Amrsx Ac Tocu - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, coil weight: 10,000 kg, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness copper (max.): 2 mm, inner diameter: 508 mm, sheet thickness (max.): 2 mm, outer diameter: 1,600 mm, coil width: 1,524 mm, number of blades: 3, type of input current: three-phase, warranty duration: 12 months, straightening roller diameter: 100 mm, CTL Demaq Format. New, only exposed in fair. Coil up to 10 Tons D1600, 20" Nominal. Coil Cart hydraulic. 4 rolls of feeder and 7 straight rolls. Hardened and chromed. Ncjdpfx Acjtywpbj Tsu Servo Nidec in straightener and decoiler. 3 longitudinal knifes, axis (HC) 134 mm, knifes 220 mm. Transversal shear. Full made in Spain in our facilities. Optional other devices and configurations. The most popular Demaq SPL machine. 2 unites available.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1425, table length: 3,300 mm, Urban sash stop station with fittings rack Screw feed unit S 330 Nedpfx Acoyk Rv Ae Tocu Milling unit FE 330 for milling out the lock case Hardware punching unit BS 330 with stop system for central and consistent handle position Olive drilling unit GOB 330 with hydropneumatic feed including accessories for spindle size adjustment

Year of construction: 2026, condition: new, Bosporas Machinery | AYIKA is a manufacturer of coil processing lines, roll forming lines and press feeding systems, offering high-quality and customized industrial solutions. High-performance heavy-duty cut to length line designed for precise sheet cutting with advanced configurations and up to 20-ton coil capacity. TECHNICAL DETAILS Sheet Thickness: 0.5 – 3 mm / up to 4 mm (heavy-duty configuration) Coil Width: up to 1500 mm Coil Weight: up to 20 tons Cutting / Shear Type: Gear Driven Guillotine Shear, Pneumatic Clutch Eccentric Shear, Hydraulic Shear, Rotary Shear Line Speed: up to 40 m/min (depending on configuration) Leveling System: Multi-Rollers Fine Straightener, Precision Straightener (Leveler) Stacking System: Automatic stacker (single or double stack option) Material Type: CR, HR, Galvanized, Stainless Steel, Aluminium, Hot Rolled Steel, Cold Rolled Steel This heavy-duty cut to length line is designed for precise and efficient processing of steel coils with widths up to 1500 mm and coil weights up to 20 tons. The system ensures high accuracy, stable operation and long-term reliability in industrial production environments. The line consists of integrated units including hydraulic decoiler, coil loading system, leveling unit, feeding system, cutting unit, conveyor system and automatic stacking unit. CONFIGURATION & FLEXIBILITY Ncodpfsyy R Rmex Ac Tju The system can be configured based on production requirements and material specifications: 0.5 – 3 mm standard duty configuration up to 4 mm heavy-duty configuration Different cutting technologies can be applied depending on production speed, accuracy and material type: Gear Driven Guillotine Shear Pneumatic Clutch Eccentric Shear Hydraulic Shear Rotary Shear The line can also be designed with single or double loop pit systems to optimize line speed, material flow and plant layout. KEY FEATURES Heavy-duty design for 20-ton coils High precision sheet cutting Advanced leveling system for flatness control Cutting options Automatic stacking and conveyor systems Robust mechanical structure for long service life ENGINEERING & PERFORMANCE The machine is built with a robust mechanical structure and high-quality components to ensure long-term operation under heavy-duty conditions. The precision leveling system eliminates internal stresses and improves flatness, enabling accurate and repeatable cutting results. Advanced automation and control systems provide stable operation, reduced operator dependency and efficient production management. OPERATIONAL ADVANTAGES Short lead time compared to European manufacturers High production efficiency and continuous operation Low maintenance requirements Flexible and customizable design Reliable performance in demanding industrial conditions APPLICATION AREAS Steel service centers Automotive and metal component production Construction and infrastructure materials General sheet metal processing OPTIONAL EQUIPMENT Double stacker system Vacuum stacking system Coil handling and transfer systems Advanced automation solutions *Images included in this listing show reference installations of similar cut to length lines (3 mm and 4 mm thickness ranges) successfully manufactured and commissioned in recent years across different countries. These references demonstrate our proven engineering capability, reliable manufacturing quality and international project experience.

Condition: used, Automatic start-stop shear manufactured by PROIN. It allows for cutting adjusted to the following specifications: - Strip width: 300 to 2050 mm - Material thickness: 2 – 10 mm - Tensile strength (Rm): maximum 600 MPa - Cutting length: 400 – 1200 mm The cutting speed varies depending on the strip's thickness: - Thickness ≤ 5 mm: 36 m/min Nodpfx Aexdcylsc Tocu - Thickness ≥ 5 mm and ≤ 10 mm: 18 m/min Material width: 300 – 2.050 mm Material thickness: 2 - 10 mm Tensile strength (Rm): maximum 600 MPa Length: 400 – 12.000 mm

Condition: new, 2000 mm Working width 400 mm Nodewz Ruhopfx Ac Tocu Wheel width 400 mm height adjustment 750 - 1100 mm weight of the machine ca. 0,80 t dimensions 2,0 x 0,55 x 1,0 m