Used Lenord+Bauer Gel 260-V-01250A201 for sale (37,830)

Condition: good (used), Year of construction: 2009, Clamping force: 90 t Screw diameter 1 : 30 mm Screw diameter 2 : 25 mm Gsdpfozg Ib Tsx Aptsbp Type: Multicomponent Drive: Hydraulic

Condition: like new (used), Year of construction: 2015, clamping force: 1,200 kN, Engel E-Victory 170H/50V/120 combi (2015) 2k machine CC300 controll Clamping force: 1200 kN Mould min-max: 300mm Total tool max height: 800 mm plate size : 740 x 680mm Opening stroke: 505 mm Ejector stroke: 130 mm Ejector force: 39.8 kN Pump drive power: 15 kW Injection unit 1 Screw diameter: 25 mm Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Gbjdpsxyi Rvsfx Aptep Screw diameter: 20 mm Max. swept volume: 25 cm³ Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h Possible to buy robot Engel VIPER 20 Linear (Z=3320mm)

Condition: used, maximum load weight: 36,040 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, next inspection (TÜV): 05/2027, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel with continuous crossmembers * With an extension of the chassis frame, the coupling plate is approximately 8 mm thick * with a 2-inch kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1 * Three-axle unit SAF INTRADISC * with disc brakes Ø 430 mm * ET 120 air suspension with approximately 180 mm travel Tires * Wheels with internal sensors according to UN ECE R141 * 6x 385/65 R 22.5 UNIROYAL TH 50 * 6 steel rims 22.5 x 11.75 * Offset approximately 120 mm (ET 120) Chassis components * Mechanical fifth wheel with leveling foot, approximately 24 t lifting capacity, single-sided operation on the right-hand side while driving * Storage box for: 10 side panels, folding stakes, and rear gate, fully enclosed, protected against spray water, also serves as a side protection device * 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm, installed at the rear, 1x on the left and 1x on the right Brake / Air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection lines) * Parking brake as a spring brake, external pneumatic connections as well as an external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 lifting and lowering valve, mounted on the left-hand side behind the axle unit while driving, driving position is set automatically * 2 non-interchangeable coupling heads at the front ISO 1728 * Air tanks for the brake system and air reservoir made of steel (EN 286-2) Floor * Flat floor approximately 30 mm thick, multiply laminated plywood * Floor sealed around the perimeter * Stake pockets for square tube inserts approximately 80 x 80 mm * Storage for a maximum of 14 square tube inserts approximately 80 x 80 (length 1,990 mm) on the front wall inside Front wall * Front wall approximately 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front wall according to EN 12640, Note: If the front wall is used for securing the load, suitable lashing straps must be used to tighten the load, if the vehicle is operated without side panels and a rear gate Rear wall * Folding rear wall approximately 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locks * 2 folding steps on the inside, folding steel corner posts at the rear in the height of the side panels Side wall * 4 pairs of folding stakes in the height of the side panels Gbjdpfxezc A Afj Aptep * VarioFix steel hole outer frame * 4 pairs of stake holders for folding stakes on the outer frame (evenly distributed) * 24 pairs of lashing eyes in the outer frame (according to EN 12640), permissible tensile force approximately 5,000 kg per ring Side panels * 5 pairs of folding side panels approximately 600 mm made of aluminum hollow profiles with tension bars Electrical / Electronics * Lamp carrier made of steel, arranged above the underrun protection * KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED outline lights and reflectors at the front, flashing LED side marker lights, Superseal and bayon

Condition: new, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 12,360 mm, total width: 2,550 mm, total height: 1,800 mm, Year of construction: 2021, Equipment: ABS, Interchangeable chassis semi-trailer for 40', 2x 20', 1x 30', 1x 40' HC containers * Lift axle * Pneumatically extendable rear by 1360 mm * SAF axles with disc brakes * Jost landing gears * Wabco Trailer EBS-E, ABS * Haldex Colas air system * Chocks ----Vehicle number 6945 -----Errors and prior sale excepted WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. Gjdokc T Ngopfx Aptjbp WhatsApp WhatsApp

Condition: new, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 12,360 mm, total width: 2,550 mm, total height: 1,800 mm, Year of construction: 2021, Equipment: ABS, Interchangeable chassis trailer for 40', 2x 20', 1x 30', 1x 40' HC containers * Lift axle * Rear extension, pneumatically extendable by 1360 mm * SAF axles with disc brakes * Jost landing gear * Wabco Trailer EBS-E, ABS * Haldex Colas air system * Chocks ----Vehicle number 6915 -----Errors and prior sale excepted WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. Gbodpfx Aokbvvisptsp WhatsApp WhatsApp

Condition: like new (used), functionality: unexamined, empty load weight: 6,180 kg, overall weight: 44,000 kg, axle configuration: 3 axles, suspension: air, Year of construction: 2017, Equipment: ABS, tail-lift, EXCELLENT KÖGEL WITH CURTAIN-SIDER BODY AIR SUSPENSION EBS (Electronic Braking System) LIFTING AXLE Gjdpfxezav Dkj Aptsbp SLIDING ROOF MULTI-POINT LIFTING SYSTEM AXLES WITH DISC BRAKES ALCOA ALUMINUM WHEELS

Condition: excellent (used), functionality: fully functional, empty load weight: 6,230 kg, overall weight: 44,000 kg, axle configuration: 3 axles, suspension: air, Year of construction: 2016, Equipment: ABS, tail-lift, 2 KOGEL TAULINER UNITS AXLES WITH DISC BRAKES LIFT AXLE SLIDING ROOF MULTI-POINT LIFTING SYSTEM Gbedpfxszav Ays Aptop EBS (Electronic Braking System) AIR SUSPENSION

Condition: new, maximum load weight: 32,703 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,712 mm, Equipment: ABS, * NET PRICE * SAF axles with disc brakes * Lift axle * Pallet box for 32 pallets * Anti-vandal tarpaulin * Lashing eyes left and right * Pallet stop edge right and left * Toolbox * Code XL/Beverages/Waste Paper/Daimler * Edscha roof * Portal doors * Aluminum slats * LxWxH: 13.63 x 2.48 x 2.71 * Tires: 385/65 R22.5 * 4 available * New vehicle available immediately from stock * Financing * Rental possible (Krone, Schmitz, or similar) Godpfx Aowklhujptebp Subject to errors and prior sale! Sale is subject to exclusion of any warranty! We speak Russian - We speak English - We speak Polish - We speak Spanish

Condition: new, Tool spindle 0.533.518.3 for Klingelnberg gear cutting machine, steep taper 1:3.975, length = 228 mm, Ø connection: 150 mm, Ø flange: 186 mm, Ø tool connection 99 mm, unused in original packaging, 100% functional, scope of delivery as per photos Gjdpfxey Rcn Ee Aptebp

Condition: new, Year of construction: 2024, empty load weight: 178 kg, Dreipunktstreuer D301 0.3m³ Description: Spreader with three-point linkage (CAT 1) and a single spreading material chamber. The spreading material is conveyed via an auger and distributed by the patented spreading disc unit. Hydraulically driven motors, controlled by Kugelmann hydraulic block. All drives can also be operated manually in the event of control failure. Chain drive ensures high torque when starting the auger. Corrosion-resistant material combination: stainless steel subframe (VA) and plastic spreading material hopper. Support legs can be folded up towards the spreader during operation. Features: - Hydraulically driven single-chamber spreader with auger and spreading disc - Corrosion-resistant combination of stainless steel subframe and plastic hopper - Dimensions (WxDxH): 1080 x 590 x 1200 mm - Unladen weight: 178 kg - Includes apron/splash guard - Includes tarpaulin cover - Includes road lighting (compliant with StVZO) - RAL 2011 signal color - Manual emergency operation - Foldable support legs - Low energy consumption - Operable from an oil flow rate of 15 l/min - Patented spreading disc unit - Manual adjustment of spreading pattern - Winter service marked with reflective white warning film - Can be operated without control unit (via control cabinet key on easily accessible side) - Mounting for CAT 1 Standard Equipment: - Hydraulic drive for auger and spreading disc - Stainless steel (VA) subframe with RAL 2011 signal paint - Stainless steel spreading disc - Plastic spreading hopper - Plastic spreading disc guard - Mesh tarpaulin cover - Apron - LED lighting in accordance with StVZO - Foldable support legs (remain on device during use) - Manual adjustment of spreading pattern - Winter service marking - Operation possible without control unit - All drives are regulated and equipped with manual emergency operation - Hydraulic hoses with SVK couplings for forward and return - Spreader is fully storable (can be set down) Carrier Vehicle Requirements: - min. 20 L/min at reduced spreading output - max. 50 L/min with external oil cooler - Kugelmann system internally rated at 230 bar - Carrier vehicle with mounted spreader must not exceed permissible axle load or gross vehicle weight Optional Equipment: - k-basic 2 control unit - Wiring harness (flying) - Microprocessor control with CAN-BUS technology - Closed loop control of all drives (with feedback) - Functions: > Adjust spreading width Gjdpfxsx S Tpvo Aptebp > Adjust spreading density > Rotating beacon on/off > Work light on/off > Spreader operating/pause > Illuminated keys and rotary controls > Data recording > Speed simulation > x2 key for travel-dependent spreading (compatible with k-basic 2) - Option: Travel-dependent spreading incl. start/stop function – driving signal required - LED work light 12V Storage location: not specified

Year of construction: 2013, operating hours: 36,800 h, condition: used, Svetruck 1260 with approx. 36800 hours. Runs great Gsdpfxev E Al Ue Aptebp

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M14L/8034, Offer Number: M14L/8034 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: TR6V Constr. year: 1970 diameter range: 10-20 mm shaft length under head: 16-180 mm max. thread length: 105 mm output pieces/min: 100 Location: In our warehouse Gbsdpfx Apjwi Tc Retjp

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2008, next inspection (TÜV): 07/2025, loading space length: 13,450 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2008, Equipment: ABS, * KÖGEL 3-axle * Standard box semi-trailer * Second-hand (from Germany) * BPW-ECO-Plus axles * Air suspension * Double-deck * Roll-up rear door * Tires: 60-80% (385/65 R22.5) * Dimensions: L-13.450 W-2.480 H-2.600 mm (internal) * Color: White with lettering, chassis black * etc. Please, no emails, only phone calls! Subject to prior sale and errors! Functionality of extras not guaranteed! We also speak: ENG / ITA / HR / SRB / BiH Your contact: Ludvig Kozuha, Mobile WhatsApp, Viber Over 20 years of experience in the buying and selling of commercial vehicles! - RELIABLE & FAIR - Former DAF contract partner! Gbsdezb T Hfspfx Aptjp

Condition: used, empty load weight: 7,500 kg, maximum load weight: 25,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2012, loading space length: 11,600 mm, loading space height: 275 mm, total length: 2,600 mm, total width: 4,000 mm, total height: 12,000 mm, suspension: air, tire size: 385/65 22,5, Equipment: ABS, | Kögel SKVT 24 Double-decker refrigerated trailer | SAF axles with disc brakes | Carrier 1200 | 385/65R22.5 | Toolbox | Cooling data recorder | Electric and diesel freezer unit | Double-decker in good condition | Subject to errors and advance sale Gbodpswcf Ifofx Aptep

Condition: used, empty load weight: 8,550 kg, maximum load weight: 26,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 11,600 mm, loading space height: 275 mm, total length: 2,600 mm, total width: 4,000 mm, total height: 12,000 mm, suspension: air, tire size: 385/65 22,5, Equipment: ABS, | Kögel SVKA 24 Refrigerated Double-deck Semi-trailer | SAF axles with disc brakes | Carrier Maxima 1300 | 385/65R22.5 | Toolbox | Temperature data recorder | Electric and diesel deep-freeze unit | Good condition, double-deck | Pallet box | Subject to error, input mistake, and prior sale Gedpfow Hbuisx Aptjbp

Condition: used, axle configuration: 3 axles, first registration: 06/2013, loading space length: 13,500 mm, loading space width: 2,460 mm, loading space height: 2,550 mm, total length: 13,600 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,910 mm, color: other, Year of construction: 2013, Equipment: ABS, = Additional Options and Accessories = Gbedpfx Apey U Ev Hetop - EBS - Aluminum rims = Notes = Number of axles: 3, Payload: 33860 kg, Tare weight: 9140 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Aluminum rims, Suspension type: Full air, ABS, EBS, Body year of manufacture: 2013, Refrigeration unit manufacturer: Thermoking, Refrigeration unit model: SL 400e, Refrigeration unit: Diesel/electric, Unit hours / electric: 1270, Unit hours / Diesel: 6467, Wall thickness: 6 mm, Type of cooling: Cooling, Axle type: BPW, THERMO KING SLX E 400 = Further Information = General Information Cab: Day cab License plate: OL-42-ZH Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle Configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread left: 3 mm; Tire tread right: 5 mm Axle 2: Tire tread left: 3 mm; Tire tread right: 6 mm Axle 3: Tire tread left: 4 mm; Tire tread right: 6 mm Weights Unladen weight: 9,140 kg Payload: 33,860 kg GVW: 43,000 kg Functional Refrigeration unit: Diesel and electric (6467 operating hours diesel; 1270 electric) Wall thickness: 6 mm Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 06.2027 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2005, ENGEL VC1800/400 POWER injection molding machine Basic data Manufacturer: Engel Model: VC1800/400 Power Type: Tie-bar-less hydraulic injection molding machine Control: Engel EC100 Year of manufacture: 2005 Operating hours: 110,000 h Country of manufacture: Austria Clamping unit Parameter Value Clamping force 4000 kN (400 tons) Opening stroke 1008 mm Godpfx Ajzb Ivheptobp Ejector stroke 250 mm Ejector force 96.2 kN Injection unit (current configuration) Screw Ø60 mm Parameter Value Screw diameter 60 mm Max. injection volume 764 cm³ Max. injection weight PS approx. 695 g Max. screw speed 226 rpm Injection rate 283 cm³/s Injection pressure 1963 bar Max. injection pressure 2361 bar Nozzle stroke 500 mm Nozzle clamping force 110 kN The data for the injection unit comes from the original machine data sheet. Drive Parameter Value Pump motor power 45 kW Mounting plates The machine belongs to the Engel Victory 400T series. Typical plate dimensions for this size are approximately: Parameter Value Fixed platen approx. 1200 × 1100 mm Moving platen approx. 1200 × 1100 mm Max. mold height approx. 300–800 mm Exact transport dimensions - 7.5 × 2.2 × 2.7 m / 20 t.

Condition: used, maximum load weight: 32,130 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2023, next inspection (TÜV): 11/2025, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, Kögel S24-1 Safe-Server, RSAB System, double-sided Fast Quickslider side roof tarpaulins, floor pallet stop strips with Variofix stop strips with hole pattern, Vario-Fix perforated outer frame, partial cargo securing package for rear load securing consisting of 2 roof guide rails along the entire length right and left, 2 integrated vertical load bars, 3 sprung crossbars, double-sided Quicklock fast-release side tarpaulins, pallet box, BPW axles, axle lift system on axle 1, fully automatic load-dependent axle lift control. Start-assist: activation via 3x brake application, 30% overload up to a speed of 25 km/h. 2 plastic toolboxes EBS system 2S/2M with stability program (includes ABS/ALB function) Kögel Telematics System BasicTrailer incl. location monitoring, coupling status, EBS data - Certificate for load securing according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - "Daimler Load Securing DL 9.5" certificate - Certificate for waste paper transport Very well-maintained, rarely used trailer, original net price: €41,900 Gbjdpfxszamtio Aptop Technical data: Technically permissible total weight: approx. 39,000 kg Basic equipment curb weight: approx. 6,870 kg Curb weight of individual vehicle configuration approx.: 6,333 kg Load area length int.: approx. 13,620 mm Load area width int.: approx. 2,480 mm Clear loading width rear: approx. 2,480 mm Loading height unladen in horizontal drive position: approx. 1,220 mm Loading height laden in horizontal drive position: approx. 1,190 mm Ride height set to 290 mm Side clear loading height int.: approx. 2,560 mm Internal height under roof: approx. 2,760 mm Front overhang (according to ISO 1726): approx. 1,685 mm Front overhang radius (according to ISO 1726): approx. 2,040 mm Rear swing radius (opposite to ISO 1726): approx. 2,100 mm Fifth wheel coupling height: approx. 1,130–1,190 mm Chassis: Axle lift system on axle 1 Fully automatic, load-dependent axle lift control. Start-assist: activation via 3x brake, 30% overload up to 25 km/h. BPW three-axle unit, with disc brakes Ø 430 mm, ET 120. Air suspension with 180 mm stroke. Tyres: 6x 385/65 R 22.5, 160J tyres (European brand of Kögel’s choice). Steel rims 22.5 x 11.75, offset 120 mm (ET 120). Documents: - Certificate for load securing according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - "Daimler Load Securing DL 9.5" certificate - Certificate for waste paper transport TECHNICAL DETAILS Gross weight: 39,000 kg Unladen weight: 6,870 kg Max payload: 32,670 kg Axle configuration: 3 Axle wheelbase: 6,390 mm Cargo area length: 13,620 mm Cargo area width: 2,480 mm Cargo area height: 2,710 mm First registration: 11/2023 Suspension: air Colour: black Tyre size: 385/65R22.5 Equipment: ABS, EBS, telematics Original net price: €41,900 A full list of equipment will be sent on request. Despite utmost care, errors within this advertisement cannot be ruled out. Subject to errors and prior sale! More information on request.

Condition: used, first registration: 04/2025, Year of construction: 2025, Equipment: ABS, Kögel MEGA S24 MEGA, lift axle on the 1st axle, lifting roof, Vario Loch-FIX frame, BPW axles, pallet stop strips left and right, sliding curtain sides, sliding roof cover, toolbox, 1st owner, as new condition. Permissible kingpin load: 12,000 kg Technical possible kingpin load: approx. 12,000 kg Permissible axle load: 24,000 kg (8,000 kg per axle) Technical possible axle load: approx. 27,000 kg (9,000 kg per axle) Permissible total weight: 36,000 kg Technical possible total weight: approx. 39,000 kg Unladen weight, basic equipment: approx. 6,130 kg Unladen weight, individual configuration: approx. 6,582 kg Theoretical payload: approx. 29,418 kg Floor load capacity according to DIN EN 283 with test axle load 7,200 kg (A) Wheelbase: approx. 6,390 mm (A1) Axle spacing: approx. 1,310 mm (A2) Axle spacing: approx. 1,310 mm (D) Overall length: approx. 13,950 mm (E) Overall width: approx. 2,550 mm (F) Internal loading length: approx. 13,620 mm (G) Internal loading width: approx. 2,480 mm (G2) Rear through-loading width: approx. 2,480 mm Tire size: 445/45R19.5 (H1) Loading height unladen, driving position level: approx. 1,020 mm (H2) Loading height laden, driving position level: approx. 990 mm (H3) Achievable dock height at rear with kingpin height 910 mm, loaded, raised: approx. 1,200 mm Ride height set to 265 mm. (K) Side through-loading height, internal: front approx. 2,735 mm - 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810 - 2,860 mm [adjustable by 1x50 mm] (K1) Height under roof, internal: front approx. 2,875 mm - 3,000 mm [adjustable by 5x25 mm] | rear approx. 2,950 mm - 3,000 mm [adjustable by 1x50 mm] (X1) Overall height unladen, driving position level: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment (X2) Overall height laden, driving position level: = H2 + K + T +/- body height adjustment Superstructure settings: The “Mega” superstructure design allows a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, lateral through-loading height, internal height) change accordingly depending on the selected body setting. (T) Roof construction height, side: approx. 180 mm. Due to the design of the roof beam, the internal pallet-width height corresponds to the specified internal height under the roof. (N) Front overhang (according to ISO 1726): approx. 1,685 mm (N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm (O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm (P) Construction height above king pin: approx. 90 mm (S) Possible kingpin height unladen: approx. 930 - 1,060 mm, horizontal at approx. 930 mm (Pay attention to overall height!) Braking system in accordance with ECE-R13 Electrical system in accordance with ECE-R48 Wabco brakes, air suspension BPW triple-axle assembly ECO Air with disc brakes Ø 370 mm, ET 120, 260 mm air suspension stroke. Gsdpjzamrxofx Aptjbp 6 x 445/45 R 19.5 tires Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in the direction of travel Vario Fix steel-perforated outer frame with 3 pairs of stanchion sockets Mechanical/hydraulic lift mechanism, lift height from lowest position approx. 500 mm/600 mm, 4 operating levers at each corner stanchion. Complies with safety regulations according to BGV D 29. (Lifting roof can only be operated with doors open!) Load securing certificate according to EN 12642 XL (VDI 2700). Road transport only. "Daimler load securing DL 9.5" certificate

Condition: used, maximum load weight: 32,320 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, Vehicle Description: Kögel S24-1 Cargo, Lifting Axle, BPW ECO Axles Air Compact, Edscha sliding roof, side curtains, mounted on both sides: Steel pallet stop strips with VarioFix hole pattern (bolted), VarioFix slotted frame, on both left and right sides in the direction of travel, for internal width 2,468 mm (loading height under outer rail is reduced by approx. 20 mm). Axle lift mechanism on axle 1, fully automatic, load-dependent axle lift control. Start assist: activation by pressing the brakes three times, 30% overload allowed up to a speed of 25 km/h. Plastic toolboxes EBS system 2S/2M with stability control program (includes ABS/ALB function). IDEM Telematics System BasicTrailer incl. GPS location monitoring, coupling status, EBS data. - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". Technical Data: Permissible total weight: approx. 39,000 kg Basic equipment unladen weight: approx. 5,920 kg Unladen weight of customized vehicle configuration: approx. 6,333 kg Bed length (internal): approx. 13,620 mm Bed width (internal): approx. 2,480 mm Rear through-loading width: approx. 2,480 mm Loading height unladen, level travel position: approx. 1,220 mm Loading height laden, level travel position: approx. 1,190 mm Vehicle height set at 290 mm Side through-loading height (internal): approx. 2,680 mm Height under roof (internal): approx. 2,760 mm Front overhang (ISO 1726): approx. 1,685 mm Front overhang radius (ISO 1726): approx. 2,040 mm Rear swing radius (contrary to ISO 1726): approx. 2,100 mm Fifth wheel coupling height: approx. 1,130–1,190 mm Chassis: Axle lift mechanism on axle 1, fully automatic and load-dependent. Start assist via triple brake actuation, 30% overload up to 25 km/h. BPW ECO Axles Air Compact assembly with disc brakes Ø 430 mm, ET 120. Air suspension with 180 mm lift. Tyres: 6 x 385/65 R 22.5 tyres, 160J (European brand of Kögel's choice). Steel rims 22.5 x 11.75, offset 120 mm (ET 120). Tarp: Tarp rope with two holders on the front wall Sliding tarp, quality approx. 900g/m², with over-center tensioning system, according to DAIMLER cargo securing standard (DL 9.5). Gbsdjzamvqjpfx Aptsp Documents: - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". TECHNICAL DETAILS Gross weight: 39,000 kg Unladen weight: 6,330 kg Max payload: 32,670 kg Axle configuration: 3 Wheelbase: 6,390 mm Loading length: 13,620 mm Loading width: 2,480 mm Loading height: 2,710 mm First registration: 03/2019 Suspension: Air Color: Silver Tire size: 385/65R22.5 Features: ABS, EBS, Telematics A complete equipment list is available on request. Despite utmost care, errors in this advert cannot be excluded. Subject to prior sale and errors. Please request more information.

Year of construction: 2026, condition: new, machine/vehicle number: KVK 3 Automatik_Vorführer_1, This automatic stretch wrapper, the KVK 3 Automatic with a turntable, independently applies the film to the pallet compared to the KVK 3, and also cuts it off after the wrapping cycle. The wrapping process can also be conveniently started using a remote control. No more getting off the forklift, no more bending over to attach the film to the pallet. It is also equipped with a pre-stretch system for 250% stretch. Thanks to the pre-stretch system, you can produce up to 3.5m of film on the pallet from 1m of film on the roll, thereby enormously reducing your material consumption. Furthermore, this system generates only a minimal application tension, so even light packaged goods are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 2000 kg. The KVK 3 Automatic has a 1650 mm turntable and can wrap pallets up to 2400 mm in height as standard. With adjustable speeds for the turntable and film carriage, as well as a power stretch unit that can be regulated via potentiometers, you can perfectly adapt the automated wrapping process to your product. Automatic detection of your pallets (via a photoelectric sensor) is just as standard as adjustable top and bottom wrapping. Programs are available for wrapping “up only”, “up and down” (cross-wrapping), and “weatherproof” wrapping. If necessary, the wrapper can also be controlled manually. If the wrapper needs to be used in a different location, it can be easily lifted and moved with a forklift using the built-in recesses. Options: In addition to a suitable ramp and a photoelectric sensor for detecting dark packaged goods or black film, the KVK 3 Automatic can also be optionally adjusted in wrapping height (up to 3200 mm). Gjdpozaakuofx Aptobp This model is our clear recommendation if you wrap very light packaged goods or wrap more than approximately 30 pallets per day and want the film to be applied and cut off automatically each time. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2026, condition: new, The VOGEL V540E is a high-performance, automated paper cushioning machine and one of the most efficient paper void fill systems in its class. It processes wide paper rolls up to 500 mm and produces high-quality, three-dimensionally structured paper cushions (“paper bubble cushions”) with outstanding cushioning properties. Ideal for professional packing stations, logistics centers, and larger e-commerce operations seeking an ecologically sustainable, high-performance, and cost-effective alternative to conventional bubble wrap. With automatic length control and an optional winding mode, the V540E is capable of producing both loose cushioning pads as well as complete cushioning rolls for storage or further processing. Advantages: - The VOGEL V540E is a high-performance, automated paper cushioning machine and among the most efficient paper filling systems in its category. - It processes wide paper rolls up to 500 mm and produces premium, three-dimensional structured paper cushions (“paper bubble cushions”) with excellent shock-absorbing properties. - Perfect for professional packing areas, logistics centers, and large e-commerce frameworks requiring an environmentally friendly, high-capacity, and cost-effective solution to traditional bubble wrap. - Thanks to automatic length control and optional winding mode, the V540E can manufacture both loose cushion pieces and full-length cushion rolls for storage or further processing. Special Features: - Easy operation - Excellent price-performance ratio - Optional winding station / automated cushion roll production - Optimal replacement for bubble wrap - 100% recycled paper Our Service for a Strong Partnership: Gbedsy U U Swepfx Aptsp - Free technical hotline - Long-term spare parts availability - 99% of spare parts available within 24/48 hours - We supply the right consumables for your application! About us: Since the early 1980s, we have accumulated practical expertise in handling packaging machinery. This makes us true experts – not just in the machines themselves, but also in their functionality, strengths and weaknesses, applications, consumables, and cost-benefit ratios. We always pass this experience on to our customers. For example: Attention! Mistakes in selecting a new product can quickly lead to high costs, making your investment uneconomical or resulting in insufficient performance!

Condition: used, Year of construction: 2004, Victory 330/80 PLUS Year: 2004 Serial No.: 52863 Gjdpfx Aozcaxdeptsbp Operating hours: 103,000 Screw: D40 CC200 A01 4-circuit water cooling 1x core pull 4x digital input, 4x digital output Few sockets ROBOT: TecnoMatic Micro 210/0184 Year: 2021 Load: 3 kg X-Y-Z – servo C – pneumatic

Condition: used, Year of construction: 2006, operating hours: 4,500 h, VICTORY 200/80 Power SN: 50294 Year: 2006 Closing force (kN): 800 S10 screw, diameter 30mm Operating hours: ONLY 4,500 Mounting plates enlarged vertically Mould heater with 12 control loops HV 2 version with control pumps (pressure and flow control in a closed control loop) for parallel movement sequence Microcomputer CC100 A03 Ethernet interface for use with EMS Gsdpfxszcanrs Aptobp 8x digital output, 8x digital input Interface for ejector protection Interface for temperature control units, Data protocol: Engel, physical type: 20MA-CL Microflow MINI-CAM: Process parameter adjustment support based on an expert system 2-pole service socket, 230V 6x 3-phase socket, 10A / 16A 2x 3-phase socket, 10A / 16A, switchable 2/2-way magnetic air valve, R1/4 inch Flow regulator 0-10 l, 4 circuits Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) - Switch-off function selectable. Tubing for flow controller, 4 temperature control circuits

Condition: used, maximum load weight: 36,040 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 05/2027, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Regular ladder frame in lightweight steel construction with continuous crossmembers * With extended chassis frame * Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337 * Axle lift mechanism on axle 1 * Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120 * Air suspension with approx. 180 mm travel Tires: * Wheels with internal sensors according to UN ECE R141 * Tires 6x 385/65 R 22.5 UNIROYAL TH 506, steel rims 22.5 x 11.75, offset approx. 120 mm * Chassis components: * Mechanical landing gear with leveling foot, approx. 24 t lifting capacity, single-sided operation on the right side * Storage box for: 10 side panels, folding stakes, and rear flap, completely enclosed, protected against spray water, and simultaneously serving as lateral protection * 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm, mounted at the rear, 1x left and 1x right Braking / Air Suspension System: * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS connector ISO 7638 (without connecting lines) * Parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit * Driving position is automatically adjusted * 2 non-interchangeable coupling heads at the front ISO 1728 * Air tanks for braking system and air reserve made of steel (EN 286-2) Floor: * Plate floor approx. 30 mm thick, multiple-ply glued plywood * Floor sealed around the perimeter * Pocket for square tube inserts approx. 80 x 80 mm Front wall: * Storage for max. 14 square tube inserts approx. 80 x 80 (length 1,990 mm) on the inside of the front wall * Approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * N o t e: When using the front wall for securing the load, suitable lashing straps must be used for tensioning if the vehicle is operated without side panels and a rear flap Rear wall: * ATTENTION: Hinge mount for folding rear wall 600 mm as well as stake mount for folding corner stakes at the rear, however, the folding rear wall and corner stakes at the rear are OMITTED. Side wall: * VarioFix steel outer frame, 4 pairs of stake mounts for folding stakes on the outer frame (evenly distributed), WITHOUT folding stakes, pair of lashing brackets in the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring. Side panels: * ATTENTION: Hinge mount for 5 pairs of side panels on the outer frame as well as side panel stop mounted on the corner posts at the front, however, the 5 pairs of side panels are OMITTED. Electrical system / Electronics: * Lamp carrier made of steel, arranged above the underrun protection * KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights * 2 LED outline lights with pendulum bracket Gjdjy Trwuepfx Aptebp * 2 multi-chamber tail lights *