Used Leuze Rotoscan Rs4-4 for sale (58,170)

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Iedpfxsfdkb Ts Anweth - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Itodpfjd Tbbdsx Anwjh The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Itedpfx Anjd Tqalswjh - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Itsdpfx Anjfdkb Ujweh The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) Itjdpeguk A Hjfx Anwoh - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg Itsdpfxsfdkbho Anwjh - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Itodeguk Dkopfx Anwsh - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Itodpfjguk Dvsx Anweh Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, pallet spaces: 108 euro pallets, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; Iodpfsv Ukz Asx Anweth except islands! Deliveries to EU countries are subject to individual agreement.

Year of construction: 2013, condition: good (used), Rebuilt 2013 Size: max 420 x 360 mm min 105 x 70 mm Speed: max 5100 c/h Equipment - hand fed station - 12 stations - missing sheet and double sheet control - criss-cross delivery standards: - 1 set of operating manuals 1- set of electrical diagrams Itedohc Nlljpfx Anwjh standard tools: - 1 spare part catalogue standard equipment: Condition cleaned & checked Helmstedt, Germany next airport Hannover

Condition: used, Year of construction: 2009, machine/vehicle number: PR22, Used injection molding machine H160 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-efficiency cap and closure production, making it an excellent choice for beverage production environments that require consistent, high-quality outputs. Manufactured in 2009, the unit features a 160-ton clamp force platform paired with a 24-cavity cap mold optimized for 29/25 mm neck finishes. It is supplied with robust auxiliary equipment to stabilize process conditions and streamline operation in an industrial packaging workflow.Manufacturer: Husky Injection Molding SystemsModel: H160 RS45/42Year: 2009Application: Cap/closure molding for beverage packagingMold cavitation: 24 cavitiesClosure specification: 29/25 mm, Free Start CapNominal part weight: 1.20 g (cap)Clamp force: 160 tonsElectrical supply: 400 V, 50 Hz, 3PH+N+PEMain supply current: 101 ALargest motor load: 42 ALargest heat load: 31 AShort-circuit current rating (SCCR): 10 kAIncluded equipment: Altanium heater controller, mold dehumidifier, hopper loader, color mixer unit, available spare partsAdvanced Automation & Control SystemsThe machine is equipped with an Altanium heater controller to deliver precise thermal management across the hot runner zones. This tight temperature control promotes uniform melt flow, faster startups, and reduced scrap, vital for thin-wall cap molding. The industrial control panel supports a 3-phase + neutral + protective earth electrical system, with clearly defined load ratings for motors and heating circuits to facilitate safe integration and predictable operation.Precision heater control with Altanium technologyClearly rated electrical distribution for motors and heatersStable process conditions for consistent cap qualityDesigned for quick setup and repeatable mold changeoversProduction Line Integration CapabilitiesThis unit integrates seamlessly into cap and closure production cells serving a used bottling line or standalone cap manufacturing operations. It can feed downstream systems such as vision inspection, lining/printing, and bulk handling for PET bottle closures. The 29/25 mm specification aligns with common beverage packaging neck finishes, supporting high-throughput operations in industrial packaging environments.Standalone or inline operation with downstream handlingCompatible with PET bottle packaging for beverage productionAuxiliaries included to stabilize material handling and color dosingMachine Condition & Maintenance HistoryThe machine is indicated as still in production, reflecting ongoing operational status and functional readiness. The inclusion of a comprehensive set of available spares and auxiliary units supports routine maintenance, uptime, and rapid troubleshooting typical of second hand i... Itodpfx Ansyhbdxewsh

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H With manual gate valve Gas strut opening lid Internal stainless mesh screen Mobile on lockable castors Some with pneumatic vibration device. Itsdpfsurf Twex Anweh Some with level sensor device In excellent condition

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Itsdpfx Aewq Sv Eenwoh Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: used, Round magnets with MK 4 mount, D = 140 mm and D = 220 mm Itedpfx Aeyr Nd Ujnwjh

Condition: used, Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, We offer this used FORMAT-4 PROFIT H200R 13.33 throughfeed machining centre, year of manufacture 2022. Type: PROFIT H200R 13.33 Serial number: 30B.05.067.22 Code: 9417 Rated voltage: 400.0 V Number of phases: 3P+N Frequency: 50/60 Hz Rated current: 40.0 A Power: 18.0 kW Year of manufacture: 2022 Itsdeyvtq Ujpfx Anwsh Control voltage: 24 VDC Minimum protection fuse: 32 A Maximum protection fuse: 50 A Minimum compressed air supply: 8 bar Air consumption: 350 Nl/min If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2001, center height: 525 mm, workpiece weight (max.): 5,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 1,060 mm, The machine underwent a retrofit in 2024. Control: Siemens Sinumerik 840D. Itsdsw Ngm Ujpfx Anwoh

Condition: good (used), functionality: fully functional, For sale: 1 pair of used Leuze light grids MLD 535-RT2 M and mirror MLD 510-RT2 L Iodpfx Ajyl S E Ujnweth

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Door Type Solid door (non‑glass) version Iedoxhdthepfx Anwjth Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: excellent (used), We are offering a temperature test chamber here. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone. Itsdpfx Ajygunhonweh

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 3,690 mm, total height: 8,350 mm, For sale: A robust industrial steel platform staircase with four levels, suitable for use in production halls, factories, and technical installations. The structure consists of multiple landings with fixed stairs and is made of steel, equipped with safety railings (yellow) around the platforms. The staircase is designed for intensive industrial use and provides safe access to higher installations or machinery. The construction is freestanding, stable, and suitable for fixed installation on a concrete floor. Specifications: Type: Industrial platform staircase / work platform Material: Steel Number of levels: 4 Isdpfx Aeyf Un Senwsth Total height: approx. 8.35 meters Landing heights: 1st level: approx. 1.81 m 2nd level: approx. 3.60 m 3rd level: approx. 5.40 m 4th level: approx. 7.22 m Width: 200 cm Length: 396 cm Staircase length (diagonal): approx. 3.96 m Design: fixed stairs with intermediate landings Safety features: railings around the platforms

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Itsdpfxoucw S So Anwsh

Condition: used, Year of construction: 2010, operating hours: 29,900 h, functionality: fully functional, machine/vehicle number: 21470, power: 45 kW (61.18 HP), volume flow: 390 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, Equipment: refrigerant dryer, type plate available, Renner RS 45 Screw Compressor - Fully functional, regularly serviced and inspected up until removal Iodeykn Ehepfx Anweth

Condition: used, Level shifter, level shifter, converter, level adjustment -Manufacturer: pilz, level adjustment type V24/RS485 -Interface: 9 25 pin -Voltage: 220V Itodpfjlfihvex Anwoh -Dimensions cardboard: 155/100/H80 mm -Weight: 0.4 kg

Condition: used, Light barrier, safety light curtain, switching part, control unit, control box -Manufacturer: Leuze lumiflex, switching part control unit ULS-5 -Voltage: 230V Iodpfx Ansp Hiy Eswoth -Quantity: 1x switching part available -Dimensions: 250/120/H80 mm -Weight: 2.5 kg

Condition: used, One-way light barrier, optosensor Itsdpeb A Tfcefx Anwjh -Item no.: 50081336 -10-30 V DC -Price: per piece -Number: 8x available -Weight: 0.1 kg