Used Loewer Dsm 2004 for sale (1,201)

Condition: used, Year of construction: 2004, Book stacker Kolbus DS 391 Year: 2004 For stacking of books. Universally usable as stacker and emergency delivery Description: - Turning device - Pass-through stacker - Straight delivery Max. mechanical speed: up to 65 cycles/min Maximum size range: 382 x 305 x 80 mm Minimum size range: 100 x 100 x 4 mm Lrjdpfxjypmrdo Agret Maximum pile height: 325 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2004, condition: used, Conveyor Kolbus FS.T Year: 2004 Lrsdpfjyt Drpsx Agrjt Description: - Transport system, length (approx): 204 - 224 cm. - Conveyor (walk through)

Year of construction: 2004, condition: used, Conveyor Kolbus FS.L Lsdpfx Aeyt Dygegrort Year: 2004 Description: - Transport system, length (approx): 150 cm. Height adjustable

Year of construction: 2004, condition: used, Conveyor Kolbus XTN 640 Lrodpeyt Dyyofx Agret Year: 2004 Description: - Conveyor (90° to the right)

Condition: used, Year of construction: 2004, Approx. 51 million prints Format: 37 x 52 Alcolor dampening Ljdjxyf Hmspfx Agrort Minus version Autoplate Automatic blanket washing device Powder device Accessories: Beil plate punch Available at short notice

Condition: used, Year of construction: 2004, 2 blades Ledpfoxzpwlex Agrert Automatic ascent Pneumatic pressers Adjustment stops 380V

Condition: used, Year of construction: 2006, 2006 | Mercedes-Benz Actros 3241 K 8x4 2004 RSP ESE 32 / 7-2 Double Turbine | Used Suction Excavator | 204214 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 30 approved ✅ 0 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Lsdsx Rpdmopfx Agrert Machine was working at the time of inspection, except as noted. Could not fully test vacuum hydraulic arm, (because of a fault in one of the cylinders). There is some oil residue around the PTO pump. Suction hose diameter 250 mm, max volume flow 3'000 m3/h, max vacuum pressure 47'000 Pa, side tipper discharge, filter system (40 cartridge filter with automatic cleaning, 6000mm range), remote control: yes, main tank size 10 m³, Air compressor system: max 4.5 m3/min, 7 bar 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31334 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2004, Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Lredpfou Hza Dox Agret Stroke triggering via foot switch Assortment of tools is included in the price Weight: 1400 kg

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 4x2000 SMO-2004-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 4.0 mm - Maximum working length: 2000 mm - Cutting angle: 0.5 - 1.5° - Strokes/minute: 6 - 20 - Backgauge retract distance: 600 mm - Motor power: 4.0 kW - Length: 2700 mm - Width: 1500 mm - Height: 1650 mm - Total mass: 2500.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. Lrjdpfx Agjiggf Isrjt In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Ledpen Hwl Asfx Agrort Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis

Condition: excellent (used), Year of construction: 2017, Schneider Ozga strapping machine for strapping parcels Lredjtyytpjpfx Agrot

Condition: used, Year of construction: 2004, Pneumatic press for upholstery, Camam brand, year 2004 (CE), used Ledpfxsyccuho Agrort Dimensions and weight: Cm. 90*60*H 200. Weight 200 kg (1 piece)

Condition: good (used), Year of construction: 1992, fully automatic programmable capping with additional line detection for defect capping via LUT system infeed belt 6 m Lrsdpsl H E Tajfx Agret 6 ejection stations total length 12 m The infeed belt is not running at the moment, probably because of the frequency converter.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 29000 € 553.9 € 2050 mm 4 mm 42 1/min 750 mm 7.5 kW 800 mm 450 mm 2700 mm 2300 mm 1350 mm 2800 kg Lrsdpfxewir Dto Agret motorizedback gauge atrecirculating ballscrew with Control DT5 hold down with rubber pads Side Lay with T-Slot 2 Sheet support arms ball in the table tape measure tilting stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH

Condition: good (used), Year of construction: 1992, I sell the automatic optimising saw GreCon Dimter 2004, year 1992. Input table automatic feeding / throughfeed system Lrsdpet Ir Nqefx Agrjt Outut table 3 pcs. kickers on left outfeed table Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. Spare parts and Documentation included.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: 153, functionality: fully functional, operating hours: 100 h, Wide belt grinding machine for grinding steel sheets. Working width 1300 mm Working height from 0.5 to 160 mm Max. material deflection 0.3 mm/m Lrjdpfxeylbi As Agrjt Steel brush diameter 200 / 300 mm Felt brush diameter 200 / 300 mm Grinding wheel diameter 150 mm Number of grinding wheels 12 Grinding belt length 1900 / 2200 mm Grinding belt speed 18 m/sec Disc rotation speed 12 m/sec Rated voltage 400V Motor power 15 kW Air requirement 6 bar Air consumption 20 - 1100 NL/min Extraction pipe diameter 2 x 150 mm Noise level 96 dB Dimensions L x W x H: 1600 x 1900 x 2200 mm Weight 1800 kg (with (two units)

Condition: used, 2 Pcs. “Goudsmit 1.500mm.” for Sale Lrodpfjw R N Tasx Agrst Manufacturer: Goudsmit Magnetics Belt widthness: 1.500 mm (New belt) Included: – New Control-unit Eddy Current Separator will be overhauled, sandblasted and painted.

Year of construction: 2010, condition: like new (used), The Sunds MDF rotary valve type LAF 200 is in good as NEW CONDITION and was manufactured in 2010. It is a robust high-performance rotary feeder, also known as a rotary conveyor, designed for the continuous discharge and volumetric feeding of large-volume bulk materials and fibrous materials. Name: Used Rotary Valve Manufacturer: Sunds MDF Type: LAF-200 Year built: 2010 - Near-new condition: This LAF 200 rotary valve was used solely for spare equipment storage for an overseas project and was therefore never put into operation Lsdpegw A Etofx Agrert - Drive power: Extremely powerful 11 kW electric motor - Speed & gear ratio: Geared motor designed to reduce the speed from 1475 to 22 rpm (high torque multiplication for difficult-to-handle fibrous materials) - Rotor design: Horizontally mounted rotary valve with 7 V-shaped cells (chambers). The V-shaped geometry prevents uneven blockage and ensures continuous material flowPrice: on request. - Material: mild steel - Dimensions (complete unit): Length: 3.400 x width: 2.200 x height: 2.370 mm - Inlet and outlet dimensions (square/rectangular): Inlet: 1.980 mm x 1.180 mm outlet: 2.180 mm x 1.000 mm - Empty weight: Approx. 4.500 kg (4.5 tonnes) - Operating hours: No operating hours and in near-new condition - SEW-EURODRIVE motor: KA107 DRE160mC4, 11 kW, 1475 rpm, 50 Hz, 38.50 / 22.00 A, IP 55 - Price: on request

Year of construction: 2013, condition: used, Goudsmit rotary magnetic separator Lredpfjxc Ew Dex Agret Article number: SCRZ2020018 Year of manufacture: 2013 Excludes rotor with magnetic bars (can be supplied by the manufacturer Goudsmit magnetic systems) Dimensions: 200mm x 200mm See our other ads VMA Wekerom

Condition: excellent (used), Catalog number: 7303 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 3 pcs - Max. thickness of the workpiece: 250mm From above: - Pawls - Toothed infeed shaft, pulling - Pressure rollers - Surfacing shaft - Pressure rollers - Smooth outfeed shaft, pulling From below: - Adjustable rollers in the lower bed: 2 pcs - Motor: 7.5kW Lredpfx Agozxg S Ujret - Electric bed lifting - Lifting motor: 0.75kW - 4 feed speed settings - Feed motor: 1.5kW - Diameter of dust extraction nozzle: 140mm - Dimensions (L/W/H): 1120x1250x1680mm - Weight: 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Net price: 19900 PLN Net price: 4738 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to larger fluctuations)

Year of construction: 2022, condition: like new (used), Magnetic filter: Lodpfx Aoyftf Ajgrort Suspension height: 360 mm Magnet dimensions (W x L): 90 x 92 cm Suitable for belt width 1000 mm Air cooled

Condition: good (used), Welding edge former, welding edge former, weld seam preparation, welding edge forming machine, edge milling device, edge milling machine, mobile milling machine Lrodpfx Agod Izt Ssret -Bevel length: max. 20 mm -Dimensions box: 460/360/H355 mm -Weight: 24 kg

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine -Type: SKF 20 Lsdpfox Ehf Nox Agrjrt -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 29.4 kg

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine with accessories -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm Ledpfsx Ea Ayex Agrort -Total weight: 33.2 kg

Condition: used, Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine Lrjdpfxed Izt Re Agrst -with: rail system -12x rails length: 1210 mm -Bevel length: max. 30 mm -max material thickness: 40 mm -with: electronic feed device electronically adjustable -Dimensions box: 1170/780/H510 mm -Weight: 320 kg