Used Möller Contactor for sale (220)

Condition: used, Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor, overvoltage protection switch, protective plug -Manufacturer: Phoenix Contact, surge protection plug Ovp -Type: PLT-SEC-T3-24-P -Number: 3 pieces available -Price: per piece Kdjdsf I Hqfspfx Agpol -Dimensions: 60/17/H45 mm -Weight: 0.1 kg

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor -Type: PLC-BSC-24DC/21-21 -Number: 10x relays available -Price: per piece Kdjdsb Nkuvjpfx Agpsl -Weight: 0.07 kg

Condition: used, Motor protection relays, relays, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor Ksdpfxsd Tvt Ts Agpodl -Type: 3RN1011-1BB00 -Price: per piece -Number: 7x available -Weight: 130 g

Condition: used, Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor, compact smart relay -Manufacturer: Schneider Electric -Type: SR1 A201BD Ksdpfxefndy Dj Agpodl -Dimensions: 125/90/H55 mm -Weight: 0.3 kg

Condition: used, Motor protection relays, relays, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor -Type: 3RN1010-1BB00 Ksdpfxed Tvuko Agpjdl -Price: per piece -Number: 12x available -Weight: 130 g

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: PSI-MOS-DNET CAN/FO 850/BM -Price: per piece -Number: 59 pieces -Dimensions: 100/23/H110 mm Kdjdpfx Asfg E E Regpsl -Weight: 0.2 kg/piece

Condition: used, Relay, contactor, semiconductor contactor, contactor, coupling relay -Manufacturer: Finder, coupling relay -Type: 38.51.0.240.0060 60 volts Ksdoghim Ujpfx Agpjdl -Number: 1 boxes with 10 pieces of relays each -Price: per box -Dimension: 65/90/H80 mm -Weight: 0.3 kg/box

Condition: used, Timing relay, reverse power monitor, relay, heating current monitoring, contactor, semiconductor contactor, contactor Kdsdpob Uhtnofx Agpjl -Type: KPW 20 5/1A 400V -Price: per piece -Number: 4x available -Weight: 0.7 kg

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: FL MC 10/100BASE-T/FO G1300 ST -Price: per piece -Number: 6 piece Kedsf Rum Espfx Agpedl -Dimensions: 100/20/H120 mm -Weight: 0.1 kg/piece

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, DIN rail power supply, .: 29 38 73 0 -Type. MINI-PS-100-240 AC/24 DC/2 Kodpfx Agjf Rum Nopodl -Price: per piece -Number: 4 piece -Dimensions: 100/45/H110 mm -Weight: 0.3 kg

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, switching power supply -Manufacturer: TDK-Lambda, DIN rail power supply -Type: DPP480-24-3 Kodsghtpuopfx Agpedl -Input: 3 PH 400-500 VAC -Output: 24 VDC 480 W -Dimensions: 150/112/H124 mm -Weight: 1.7 kg

Condition: used, Relay, contactor, semiconductor contactor, contactor -Type: FTT-10/3150 -Weight: 1 kg Kdsdpfjb S Hunox Agpsl

Condition: new, bore capacity in steel (diameter) 30.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 515 x 360 mm turning speeds 225 - 4300 U/min column diameter 115 mm distance spindle /table 132 / 724 mm engine output 1.0 / 1.6 kW weight 260 kg Machine height 1790 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint Kedoxaap Aopfx Agpjdl * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black

Condition: new, carrying capacity 500 kg. number of suction cups 6 Stück suction cup dia. 215 mm 0 8.0 m³/h tool adaptor Kranöse 80.0 mm voltage 400 V total power requirement 0.18 kW weight of the machine ca. 120 kg dimensions of the machine ca. 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the center of the traverse - Sturdy metal case for your crane control - Operation "suction / release" by hand slide valve - Control and safety device for vacuum lifters * Robust control box. * Contactor circuit for the vacuum pump * Safety warning device with audible alarm Kdsdjxak Ddepfx Agpel * Vacuum gauge with danger zone indicator * Large vacuum storage tank with safety check valve * Double actuation when releasing the load - Fine dust filter to protect the vacuum pump - Documentation * Special accessories included: - 6x ball valves to switch off individual suction cups * so that smaller formats can also be lifted * without having to move suction cups or traverses - Spiral connection cable small helix * with an extension length of 3,500 mm, version as * Extension cable with CEE plug and coupling * is routed to the lifting device next to the load chain

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm turning speeds 100 - 1800 U/min column diameter 145 mm thread M 24 ST60 thread M 30 GG20 feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 138 / 688 mm engine output 1.4 / 2.2 kW weight 470 kg Machine height 1865 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer Kjdpfx Asxab Nksgpedl * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm thread M 24 ST60 thread M 30 GG20 feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm engine output 1.0 / 1.6 kW weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop Ksdjxab Nwepfx Agpedl * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Condition: good (used), Control unit, control panel, control panel, control unit, foot switch, safety foot switch -Foot switch: with control box -Metal housing: with protective cover, die-cast aluminum -Switch box: with power supply block GLC 230/24-2 -Switch: Siemens -Contactor: 2x Moeller DIL EM-01-G -Individual components: see photos -Transport dimensions: 580/300/H200 mm Kdjdpswyupajfx Agpel -Weight: 10.5 kg

Condition: good (used), Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -Type: 3RN1013-2BW00 Kdedpfx Ageb A Hgxepel Price: per piece -Quantity: 2 available -Weight: 0.2 kg

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Siemens, Schütz power contactor -Type: 3TF54 Kdjdpjwx H R Hofx Agpol -Dimensions: 360/145/H200 mm -Weight: 7.6 kg

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Siemens, Schütz power contactor -Type: 3TF52 -Dimensions: 310/135/H185 mm Kdjdpfx Aswx H Tnjgpsl -Weight: 5.4 kg

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay. Ksdpswzmcbsfx Agpjdl

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V. Kodpfx Agowzl Hxjpjdl

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0803024, functionality: fully functional, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm - Spindle speed: 6000 rpm PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Kdodpev Tzw Eofx Agpsl Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Kdsdpewu Tu Dsfx Agpsl Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: good (used), Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KZT01 -5-100 s Price: per piece -Quantity: 5 available -Weight: 0.2 kg Ksdpfeb A Rxzox Agpjdl