Used Mahler Roller Hearth Furnace for sale (9,607)

Condition: good (used), Year of construction: 2011, Approx. 50-60m powered roller conveyor, Blum, with 180-degree curve – used. Price ex works (net): only €8,500, disassembled, packed, and loaded! Manufacturer: Blum Year of manufacture: 2011 Type: Roller conveyor with drive Roller diameter approx. 5cm Roller spacing: approx. 5cm Roller length: approx. 59cm Element width approx. 61cm Ledpfozpf N Hsx Agrert Approx. 50 – 60m (exact length still needs to be measured) 1x 180-degree roller conveyor curve Sale includes feet etc. Current height approx. 80cm 230V/400V Condition: good Available: immediately Location: Erfurt area

Condition: good (used), Year of construction: 2017, operating hours: 494 h, functionality: fully functional, machine/vehicle number: 27026757, type of input current: three-phase, total height: 510 mm, total width: 300 mm, total length: 706 mm, input voltage: 400 V, ground cable length: 5,000 mm, overall weight: 100 kg, type of cooling: water, hose package length: 1,200 mm, electrical fuse: 35 A, open-circuit voltage: 73 V, welding current at 60% duty cycle: 360 A, welding current at 100% duty cycle: 320 A, input current: 26 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 400 A, input frequency: 60 Hz, Equipment: type plate available, Fronius TPS 400i Pulse MIG/MAG welding system – complete with accessories For sale: Fronius TPS 400i Pulse professional MIG/MAG welding system, complete with wire feeder, mobile stand, and a comprehensive set of accessories. The Fronius TPS 400i Pulse is a professional welding machine suitable for a wide range of MIG/MAG applications. The machine features pulse welding and the ability to record welding data (datalogging). This datalogging is a built-in function of the welding machine and is not a separate accessory. Included with the machine: - Fronius TPS 400i Pulse - Fronius wire feeder, without stand - Sturdy mobile stand for the power source - 1.2-meter intermediate cable pack, currently connected - 20-meter intermediate cable pack, supplied as extra - 8-meter Push/Pull welding torch - Wera torque screwdriver, for correctly tightening the push/pull wire feed rollers - Box with various wear parts, including contact tips, gas nozzles, and other accessories - Ground cable with welding clamp - Connecting cables and other cables/hoses - Other accessories as shown in the photos - Manual available digitally Lsdezwhprspfx Agrert Versatile professional system The combination of the 1.2-meter intermediate cable pack, the supplied 20-meter intermediate cable pack, and the 8-meter Push/Pull torch makes this system highly versatile for welding aluminum, among other applications, and for larger structures or workpieces where the welding machine cannot be placed directly next to the workpiece, the set offers a great deal of flexibility. The built-in welding data recording/datalogging is of interest to professional users who value process monitoring, quality control, and traceability of welding work. The machine has been used and has normal signs of wear, but is in good and solid condition. Sold as a complete set as shown. Inspection and testing are possible by arrangement. Pick-up only, shipping not possible. A forklift is available.

Condition: used, Year of construction: 2019, operating hours: 1,990 h, * Hamm HD12i VO Vio tandem roller with oscillation * Year of manufacture: 2019 * 1990 operating hours * 2570 - 3470 kg Lodpfxjz Am Ido Agrert * 24 kW Kubota engine * Edge cutter wheel * NEW MODEL

Year of construction: 2000, condition: good (used), Temptec annealing furnace: Lrjdpfx Agex Tcmyoret Max workpiece size: approx. 1200 × 1200 × 1200 mm Loaded for transport.

Condition: excellent (used), Year of construction: 1998, I sell the roller coater Cefla Sorbini Smartcoater T/20-MF. Year 1998 Working width 1300mm Lsdpfeynvwysx Agrsrt Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately.

Condition: like new (used), Chanber size: Lrjdpfx Agsd Sm Disrjt 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C °

Condition: used, Year of construction: 2012, operating hours: 4,499 h, Equipment: all wheel drive, Vehicle number 12110 Errors and prior sale excepted. Ljdpfxjy T Ulhe Agrjrt

Condition: used, Manufacturer: David + Baader, Kandel Type: 10880.3 Machine type: Industrial furnace / Chamber furnace / Heat treatment furnace For sale is a used industrial furnace from the manufacturer David + Baader Kandel, type 10880.3. The furnace is suitable for a wide range of applications in industry, trade, laboratories, and workshops and is ideal for heat treatment, drying, or annealing processes. Technical data Manufacturer: David + Baader Kandel Type: 10880.3 Design: Electric chamber furnace Condition: Used Further technical data available upon request or as per the nameplate Features and advantages Robust industrial design Uniform heat distribution Reliable temperature control Stable furnace chamber Suitable for continuous operation Proven German quality Possible applications Heat treatment of metal parts Annealing and tempering processes Drying processes Lodpfxsznv Dfo Agrert Laboratory and testing applications Research and development Workshop and production operations

Condition: excellent (used), Year of construction: 1998, operating hours: 61,000,000 h, functionality: fully functional, machine/vehicle number: 201810, color channels: 2, paper weight (min.): 50 g/m², paper weight (max.): 280 g/m², paper width (min.): 520 mm, total length: 290 mm, total width: 190 mm, total height: 170 mm, space requirement width: 300 mm, space requirement height: 220 mm, counter reading (black): 61,000,000, counter reading (color): 61,000,000, year of last overhaul: 2025, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, Heidelberg Speedmaster SM 52-2-P offset printing press for sale, manufactured in 1998, currently in daily production and available for inspection and live demonstration. Configuration * 2 printing units + perfecting device (1/1 or 2/0) * Maximum sheet size: 370 × 520 mm * Total impressions: 60,956,393 * AutoPlate semi-automatic plate changing system * Heidelberg Alcolor dampening system * Technotrans refrigeration unit for the dampening solution * Continuous feeder * Electronic side lays * CP Tronic control console * Automatic ink key presetting from the CP Tronic console * FullWash automatic washing system for the plate cylinders and ink rollers (blanket washing unit not installed) * Replaced cylinders Technical Condition * The press is currently in daily production and can be inspected while running. * Original Heidelberg ink and dampening rollers were replaced approximately 2 years ago (invoice available). * The machine runs perfectly and produces commercial print jobs every day. * Sold complete with a Plate Punch & Bender. Automatic Washing Systems The press is equipped with automatic washing systems for: * Impression and transfer cylinders; * Ink rollers. The blanket washing units are not installed. Documentation * Original purchase invoice available. * Original Heidelberg manuals and tools. * Original electrical diagrams. Terms of Sale * VAT invoice will be issued. * Dismantling, loading and transportation are the buyer’s responsibility. Ideal for Printing * Flyers * Brochures * Business cards Lrodpfozrr U Ujx Agret * Folders * Forms * Labels * Commercial print jobs * High-quality promotional materials This press is an excellent choice for print shops looking for a reliable Heidelberg offset press with low operating and maintenance costs. Price €17,500 (VAT included).

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: 2031306, type of input current: three-phase, overall weight: 9,200 kg, Roller mill from Bühler, previously used in cornflakes production. Pre-installed are a metal detector and a vibratory channel. Control cabinet is included. Weight of the roller mill approx. 9,200 kg. Lrsdpfx Agsxgq Rkorot

Condition: used, Year of construction: 2019, Loading rack oven, Miwe Econo EC 8.0604, double convection oven. Year of manufacture: 2019 Used, in working condition 2 baking chambers, each for 8 baking trays, 60x40 cm Each baking chamber can be programmed separately Ledoz A Spwopfx Agrsrt Without exhaust hood

Condition: used, Roller conveyor in good working order Overall length: 2300 mm Length up to the curve: 1200 mm Roller width: 500 mm Ledpfxjzy Abho Agrort Height: 630 mm Please check out my other listings.

Condition: used, power: 78 kW (106.05 HP), fuel type: diesel, empty load weight: 7,200 kg, total length: 5,000 mm, total width: 25,500 mm, total height: 27,000 mm,

Condition: good (used), Pressing pliers, pressing machine, pressing jaws, pressing tools, pressing rings -Manufacturer: Roller, pressing pliers pressing jaws pressing rings set Lredpfxovmhaao Agrst -Sizes: M15, M22, M28, Z1 -Individual components: see photos -Dimensions case: 410/220/H65 mm -Weight: 4.7 kg

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS Lredpfszfyu Aox Agrjt The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: used, Various Hutfits (platforms/carts) Load capacity from 500 kg up to 2000 kg Length from 200 - 300 cm PK1 – Length 290 cm, Width 100 cm, Load capacity 2000 kg PK2 – Length 300 cm, Width 85 cm, Load capacity 1500 kg PK3 – Length 250 cm, Width 55 cm, Load capacity 1000 kg PK4 – Length 300 cm, Width 50 cm, Load capacity 1500 kg PK5 – Length 275 cm, Width 62 cm, Load capacity 1000 kg PK6 – Length 262 cm, Width 82 cm, Load capacity 1000 kg Lrsdpoym Snlefx Agrot PK7 – Length 272 cm, Width 62 cm, Load capacity 500 kg PK8 – Length 272 cm, Width 62 cm, Load capacity 500 kg PK9 – Length 200 cm, Width 50 cm, Load capacity 500 kg PK10 – Length 250 cm, Width 60 cm, Load capacity 1000 kg

Condition: ready for operation (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Complete aluminum ingot casting and stacking line manufactured in 2022 by GHI Smart Furnaces. Inclined casting machine for the production of 10 kg commercial aluminum ingots, with a nominal capacity of 5 t/h. The line includes an automatic pouring system, water spray cooling system, demolding system, cooling and ingot positioning conveyor belt, 3-axis stacking robot, and a walking beam hydraulic conveyor for package handling. • Application: casting and solidification of metal ingots Ledpfx Aezbty Sjgrort • Status: available for immediate sale • Current condition: in operation The equipment has been operated under normal industrial conditions and has been maintained in accordance with the manufacturer's recommendations. The machine is suitable for the production of aluminum ingots and can be integrated into existing melting and casting operations. Its robust design ensures reliable operation and consistent casting quality.

Condition: used, Year of construction: 2012, Deck oven, electric, multi-tiered, WP Matador Store 6.4 Lrsdpoz A Stvefx Agrst Year of manufacture: 2012 Condition: functional Drive: Electric Navigo control system (touchscreen) 4 baking chambers, each with a baking area of 60x40 cm Exhaust hood, year of manufacture: 2016 Proofing cabinet for 10 baking sheets, 60x40 cm, year of manufacture: 2016 Includes operating manual.

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC Lredpfxoxpuahs Agrot procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Condition: good (used), Year of construction: 2016, Material Handling System, TGW, nominal width 420mm, approx. 1,100m – used – Ex-works price (net): now only €99,000 instead of €269,000 – dismantled, packed and loaded, including controls, supports, etc.! Manufacturer: TGW Year of manufacture: 2016 Condition: good Available: immediately Location: Niedernberg warehouse Excerpt from Hall 2 inventory: Approx. 42 units Type: KRC KingDrive Roller Conveyor A and T Nominal width (NB): 420mm Roller pitch: 110mm Zone length: 990mm Number of KDRs per zone: 2 units Roller type: steel Conveying speed: variable, e.g., 0.47m/s Acceleration / deceleration: 1.5 m/s² Available in various versions Similar to above, only: Approx. 38 units Type: KRC KingDrive Roller Conveyor A and T Zone length: 660mm Similar to above, only: Approx. 4 units Type: KRC KingDrive Roller Conveyor A and T Zone length: 880mm Lredpfxey Iv Elj Agrot 800mm = approx. 8 units 770mm = approx. 3 units 412.5mm = approx. 1 unit 330mm = approx. 23 units KCS KingDrive Infeed/Outfeed: approx. 8 units 420mm KCC KingDrive Curve Conveyor A and T, 90 degrees = approx. 6 units 420mm 45 degrees: approx. 3 units 30 degrees: approx. 2 units 55 degrees: approx. 1 unit Roller tracks, length approx. 100mm = approx. 33 units 420mm, plastic rollers, non-driven Toothed belt diverter/inserter K: approx. 5 units 420mm Toothed belt transfer unit K: approx. 14 units 420mm, module length: 800mm PWT Pop-Up Roller Transfer: approx. 4 units Belt conveyors: approx. 18 units BFT2000 GF Belt Conveyor Nominal width 420mm

Condition: used, Year of construction: 2015, operating hours: 2,070 h, Equipment: air conditioning, Make of engine: Kubota CE mark: yes EPA Marked: yes Lrjdpfxjzzl Rzo Agrjt Emission level: Stage IIIA / Tier IV interim Production country: DE Please contact Kristoff Van Havere for more information - Cab with airco

Condition: used, Year of construction: 2011, operating hours: 5,461 h, CAT 306 TRACKED EXCAVATOR Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2011 ? BETRIEBSSTD. 5461 Std EQUIPMENT: ? Radio ? AIRCONDITION ? Joysticklenkung ? Hydraulikleitung für Schnellwechsler ? Hydraulikleitungen für Hammer/Greifer/Schere ? Rückfahrkamera TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO Lredpfx Aoxpmfcjgrst * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: excellent (used), Year of construction: 2005, 380 USED Miwe Athlet loading and unloading system. TECHNICAL DATA: - year of production: 2005 Lredpfxey S Da Eo Agrst EQUIPMENT: - 4 trolleys with belts for proofing and loading bread The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the set. The price is a net price per set. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Mayrhofer spiral roller conveyor, designed to deflect materials to the left, and is stable. Discharge length: 5.5 m. Roller length: 700 mm. Counter-rotating roller for straight discharge. Fully sheet-metal clad. Discharge end with a collection point for forklift removal, etc. Only operated for 8 months. Lrsdpfx Agozinnrjrot

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 15 kW (20.39 HP), total height: 2,300 mm, total length: 1,500 mm, total width: 900 mm, overall weight: 1,500 kg, table height: 955 mm, Equipment: CE marking, documentation/manual, motor brake, Vertical band saw / resaw Manufacturer: Stenner Type: ST 9 Heavy-duty vertical band saw for resawing and trimming of squared timber, planks, and boards Typical applications: sawmill, timber trade, carpentry, pallet manufacturing, planing mill Ljdpfx Agsz Eigfjrjrt Saw blade and rollers: Diameter of saw blade rollers: 915 mm Saw blade width: 100 mm Minimum saw blade length: 5280 mm Maximum saw blade length: 5380 mm Cutting performance: Maximum wood width: 370 mm Maximum cutting width (standard): 230 mm Maximum distance from saw line to fence: 305 mm Fence swivels 0 – 35° Drive and feed: Motor: 15 kW (optional equipment) Feed rate: variable, 7.5 – 30 m/min Dust extraction: Dust extraction port diameter: 150 mm Extraction volume: 1455 m³/h Dimensions and weight: Working height: 955 mm Dimensions (approx.): 1500 x 900 x 2300 mm (L x W x H) Machine weight (approx.): 1500 kg Basic concept: - Vertical band saw for resawing and trimming of solid wood - Fence swivels 0 – 35° for bevel and wedge cuts - Feed rate can be adjusted variably from 7.5 to 30 m/min - Saw blade rollers 915 mm, saw blade width up to 100 mm - Wood type: softwood / hardwood