Used Maitech Embroidery Machine 4 Heads 15 Needles for sale (106,049)

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration Kljdpfxeyv I Smj Amtjw

Condition: used, functionality: fully functional, machine/vehicle number: N/A, The GH-4 type shot blasting machine is primarily recommended for surface cleaning and treatment of cast, forged, and pressed parts in bulk using shot blasting. Blasting chamber dimensions: Rubber belt width: 1,300 mm Belt disc diameter: 1,150 mm Max. workpiece load weight: 800 kg Kodpfx Amoy Nbm Dotelw Shot charge: 800 kg Blasting heads: Number of blasting heads: 2 pcs Drive motor power: 11 kW Power requirements: Electric: 27.5 kW Compressed air pressure: 6 bar Quantity: 6 m3/h Dust extraction fan capacity: 5,500 m3/h Our equipment is fully refurbished and offered for sale in like-new condition. Directly from the manufacturer! We can assist with transport and assembly upon request.

Condition: used, Year of construction: 2014, Folding machine MBO T700/4 Year: 2014 Kedpfx Amoyzdt Detelw Description: - 4 page folder - MBO Navigator Feeder - Round pile feeder: R 700 - Pump Buckle folding unit: 1 MBO FP 10 - Automatic buckle plate adjustment - First buckle folding section with 4 buckle plates - Slitter shaft cassette - Perforating shaft - Anti noise hood(s) - Excluding delivery Max. mechanical speed: 30 - 230 m/min Maximum size range: 68 x 120 cm Minimum size range: 15 x 20 cm

Year of construction: 2007, condition: excellent (used), I sell the top multiple boring machine Detel M-13, year 2007. 3-spindle. Motor Perske 2,0kW Very good condition. Kodpfxohua Rpj Amtelw Available immediately.

Year of construction: 1994, condition: excellent (used), I sell the back side multiple boring machine Detel M1-9, year 1994. Klsdpfek Iy Hbsx Amtsw 9-spindle x 32mm. Motor 1,1kW Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2011, I sell the universal top multiple boring machine with milling for repair works Plug Repair RILESA Rep.-Borem., year 2011. 4 Top drilling spindles 1 Grooving moulding head Kljdpfx Aou N T Skemtew Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2005, I sell the 4-Side brushing machine suitable for windows, doors, tables, etc. Futura MS120 Y1 X2, year 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Ksdpfx Amed Raqketelw Side brushing heads left - right H.170mm 2 bottom heads left - right Nylon W.140mm Oscillating top head W.260mm Big brushing heads top - bottom W.1150mm Machine equipped with heads on the pictures. Available immediately.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Diameter x width: 750 x 1,500 mm max. operating pressure 300 bar Cutting force 60 kN Weight: approx. 2,800 kg Kjdpfsqnvtzox Amtjlw 76 chisel

Condition: used, Cup Surface Grinding Machine / Cylinder Head Grinding Machine Max. grinding area: 835 x 200 mm Electromagnetic clamping plate: 500 x 200 mm Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Machine weight: 1000 kg Kledpfx Amowlbz Tetow Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Klodjy Ah Tkspfx Amtow Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA S CCTT 1350, year 2004. Configuration: 1pc. steel cylinder Kledpfx Aovxd Ttemtew 1pc. hard rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 4 motors total power 96kW Condition very good ! Available immediately.

Year of construction: 2024, condition: new, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Machine in stock and ready for shipping Equipment: - No.2 carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) Kodpfx Asd Izq Hsmtolw - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm Kjdopl Tgmopfx Amtslw - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Year of construction: 2021, condition: new, Single-head cutting machine OMC RONDA 700, new Machine in stock Ksdpfxshrukis Amtolw - saw blade D 700 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Year of construction: 2021, condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock - saw blade D 600 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system Kodpfxshrumae Amtolw - integral pneumatic protection

Condition: new, Year of construction: 2025, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m Machine in stock Configuration: Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO: - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade Kledpfx Aewh Rlgomtjw - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes Electronic measuring system DIGISTOP 4m: - Min. cutting length 0 mm, maximum 4000 mm - Friendly software using icons and function keys - Accuracy 0.1 mm - Manual piece execution - Measurement list editor - Editor of measurement received by radio or net - Removal of piece after every cut - Visualization of reference for each measurement - Roller width 200 mm Wireless electronic measuring bar DIGIBAR 3,3m - Minimum measure 140 mm - Maximum measure (without extension) 1600 mm - Maximum measure (with extension) 3300 mm - In set includes two extensions: 1400 mm and 1700 mm - Accuracy 0.1 mm - Weight 2190 gr - Power supply 4 recharg. batt. AAA - Absolute measuring system (no recalibration required) - 2 LCD lines 16 characters - Industrial keyboard 6 keys protected - 2 LED signal for immediate display of the state of instrument - Ergonomic Handle with a simple use button for measurement capture Inlet roller conveyor PORTER 4,2 m: - Loading capacity Kg. 10 per meter - Plastic rollers, width 200 mm - Vertical plastic rollers

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock and ready for shipping Kjdpfx Amjiv Imnotelw Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Year: 2019 Condition: excellent, as new Technical specifications and equipment installed on the machine (standard and options): - No.2 new FOM carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer Kedowk R A Dopfx Amtslw - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Condition: ready for operation (used), * Surface: 6000 x 1500 mm - 2 Deck * Screen opening Upper Deck: [] 35 mm * Screen opening Lower Deck: [] 20 mm * Driving: E-motor 11 kW Kledpfx Amjywnb Rotow

Condition: ready for operation (used), * Brand: Hein Lehmann * Surface: 6300 x 1500mm - 1 Decks * Driving: 18,5 kW E-Motor Klsdpfx Asywm Trjmtow

Condition: ready for operation (used), * Brand: Främbs & Freudenberg * Type: Euroclass * Surface: 5000 x 1500 mm – 2,5 Decks * Incl.: E-motor & springs. Kledpfxeywm R De Amtew

Condition: ready for operation (used), * Brand: Dragon Kjdpoywm N Tjfx Amtelw * Surface: 5000 x 1800 mm - 4 decks * Driving: E-motor 30 kW * Incl.: springs with springsupport.

Condition: ready for operation (used), * Brand: Nordberg – Bergeaud * Type: CVB 2050 * Surface: 5000 x 2000 mm - 4 Decks * Driving : 22 kW E-motor Kedpfxjywm Eue Amtjlw * Incl.: springs and springsupport

Condition: ready for operation (used), * Brand: Nordberg – Bergeaud Kjdpfx Asywm Enjmtjlw * Type: Elivair 13 * Surface: 6000 x 2200 mm - 4 Decks * Driving : two pieces E-motors of each 22 kW * Incl.: springs and springsupport

Condition: ready for operation (used), * Brand: Triman * Surface: length 3000 mm, width 1800 mm - 4 decks Kodpfx Amsywml Istslw * Driving: 4 pieces vibration motors of each 3,2 kW * Screen opening: [] 10-6-4-2 mm * Capacity: 0-2 mm 55 t/h * Incl.: steel construction and vibrating chute.