Used Makino 2004 Makino A66E for sale (1,031)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 29000 € 553.9 € 2050 mm 4 mm 42 1/min 750 mm 7.5 kW 800 mm 450 mm 2700 mm 2300 mm 1350 mm 2800 kg motorizedback gauge atrecirculating ballscrew with Control DT5 hold down with rubber pads Side Lay with T-Slot 2 Sheet support arms ball in the table tape measure tilting stop light barriers on the back of the machine Bdedjwir Dtepfx Adioc cutting line illumination user manual in GERMAN and ENGLISH

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Bdsdpstrhv Sjfx Adijc Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Bedpfxjxl Tp Ts Adiedc Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: good (used), Year of construction: 2004, clamping force: 23,000 kN, Clamping force: 2300 t Screw diameter: 135 mm Type: Horizontal Drive: Hydraulic Injection Moulding Machine – ENGEL DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h 🔧 Clamping Unit Clamping force: 2300 kN Platen dimensions (H × W): 2900 × 2500 mm Distance between tie bars (H × V): 2000 × 1600 mm Min. / Max. mould height: 700 – 1890 mm Maximum opening stroke: 3800 mm 💉 Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm³ Shot weight (PS): 8071 g Injection pressure: 1600 bar ⚙️ Additional Equipment and Features Screw replaced in 2011, reinforced type – suitable for special materials. Option for two-component injection (2-shot). Mould tilting function. Bdjdpfsxrcahjx Adijc Magnetic platens. 2 hydraulic core pulls. 36 heating zones for the mould. 10 hydraulic cascade zones installed (expandable). Machine interface languages: English, German. Dimensions and Weight Net weight (including control cabinet): approx. 131 t (machine 113 t + control cabinet 18 t) Engel 2300 tonnes - 2004. Screw replaced in 2011. Reinforced screw for special materials. Can be injected twice. Option with mould tilting. Magnetic plates. 2 hydraulic cores. 36 heating zones for the mould 10 hydraulic cascades installed in the machine, there are more Screw diameter 135 mm Languages in the machine: English, German Machine without robot , machine in excellent condition

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Bedpoxqx Avofx Adijdc Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Bdedpfowbil Sox Adijc Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Condition: used, operating hours: 5,321 h, mileage: 24,112 km, power: 62 kW (84.30 HP), first registration: 07/2009, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 750 kg, empty load weight: 2,750 kg, next inspection (TÜV): 03/2027, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: other, emission class: euro5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, immobilizer system, onboard computer, power assisted steering, soot filter, * German vehicle * 1st owner * Original, only 24,112 km * Only 5,321 operating hours * TÜV (technical inspection) valid until 03/2027 * Documentation available * Condition, see photos * All-wheel steering, switchable * Hydrostatic drive (Easy Drive) * 2 front sweeping units, 800 mm width * Sweeping width: 2,700 mm * Extension device * Ideal for sidewalks, footpaths, and bicycle paths, narrow streets, etc. * Sweeping container 1.8 m³ * Water tank 190 liters * Opening and tilting of the container via cable remote control * Engine: VM 05D/9 * Power: 62 kW * 50 km/h approval * Working speed: 12 km/h * Cruise control * Air conditioning * Rotating beacon * Rear view camera Bdjdpfeza Hmiex Adijc * Permissible total weight: 4,250 kg (technically possible) * Permissible total weight: 3,500 kg * Unladen weight: 2,750 kg * Payload: 750 kg * Self-propelled working machine, therefore free access to all environmental zones * If sold to businesses and for export (non-EU and EU), the German commercial regulations apply. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV (German Social Accident Insurance) certificate, a new SP (safety report), or a new UVV (accident prevention regulations) certificate. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible and expressly desired at any time by appointment. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: Robot: 24-50924 / Controller: 24-50924, overall weight: 534 kg, load capacity: 10 kg, arm reach: 1,550 mm, ABB industrial robot with IRB 2400 M2004 manipulator (IRB 2400/10 Type B Standard) and IRC5 M2004 controller for industrial automation applications. Condition is used and has been tested. Typical applications include handling, assembly, machining, and general automation. Payload capacity is 10 kg with a reach of 1550 mm. Manufactured in 2006, it has 66,804 operating hours and RobotWare Version 5.16.0005.00 software. It is equipped with a main connection cable between the manipulator and controller, a FlexPendant DSQC 679 teach pendant, and the following software options: German language, World Zones, Fixed Position Events, Path Recovery, File and Serial Channel Handling, Logical Cross Connections, and Analog Signal Interrupt. Bdedpezamkhjfx Adijc

Condition: used, Year of construction: 2017, operating hours: 13,500 h, functionality: fully functional, machine/vehicle number: Robot: 2400-100778 / Controller: 2400-101444, overall weight: 515 kg, load capacity: 16 kg, arm reach: 1,550 mm, ABB industrial robot with IRB 2400 M2004 (2400/16 Type B Foundry Plus) manipulator and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 16 kg with a reach of 1550 mm. System year: 2017, with 13,500 operating hours and RobotWare Version 6.04.01.00 software. Equipped with 3 cable sets, including controller and power cables, a FlexPendant programming device, and the software options World Zones, Path Recovery, Collision Detection, Multitasking, and Service Information System (SIS). Bdsdpozamkbofx Adijc

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland Bdodpfx Adezac U Ajioc – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 waterjet cutting system for sale A very well-maintained Flow Mach 200 waterjet cutting system from 2021 is available for sale, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single-piece and small-batch production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive hand deburring system – EKOWA cutting water treatment system – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours Bsdpfx Ajy Urzisdiodc – Complete documentation available – Operator training provided – Well-maintained overall condition – Immediately ready for operation Asking price: €115,000 net Inspection possible by appointment. More pictures and information available upon request.

Condition: used, Year of construction: 2016, Technical details: turning diameter over bed: 402 mm turning dia. over face-slide: 245 mm turning length: 1000 mm centre distance: 1000 mm centre height: 200 mm Bdodpfxjvav Sds Adisc swing diameter: in Kröpfung: 560 mm throat: Breite: 120 mm revolution per minute: 40 - 345 / 345 - 1015 / 1015 - 2800 U/min feed: längs: 0,05 - 0,752 + quer: 0,025 - 0,376 mm/U spindle diameter: Ø 42 mm tailstock taper ISO: MK4 tailstock quill stroke: 180 mm total power requirement: 4,1 kW Weight approx.: 1,2 t dimension machine xH: 2,4 x 1,0 x 1,7 m Die Drehmaschine verfügt über keinen Eilgang. Positionierung über 2-Achsen Anzeige über Pinacho Lathe Controller Multifix-Stahlhalter mit Drehmeißel Kühlmittelanlage Fußtaster Gewindeschneiden möglich (metrisch, Whitworth, Modul, Pitch) *

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm throat: 320 mm ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch table-size: L x B: 4110 x 180 mm Bdjdpsu Icc Asfx Adijc work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Control DNC 7000, graphic display, PC software equipment: Cutting zone lighting stroke counter div. Tools optional *

Condition: used, Year of construction: 1986, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 204 t, stroke length: 220 mm, table length: 4,000 mm, clearance between the columns: 3,400 mm, overall weight: 12,000 kg, We offer this used PROMECAM Amada STPC 204 200 40 160 press brake, manufactured in 1986. Machine number: STPC 200 40 160 Maximum pressing force: 2,040 kN Maximum stroke: 220 mm Voltage: 380 V Frequency: 50 Hz Date of manufacture: 20.10.86 Bending length: 4 m Distance between uprights: 3.4 m Includes tooling! Machine weight: approx. 12 tons Equipped with CYBELEC DNC 7000 control A crane is available for loading. The machine is functional and still in use / can be tested while powered on. However, due to its age, we cannot offer any warranty. Bdsdsy Tmlajpfx Adisc If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2013, functionality: fully functional, ABB Robotics IRB 1600ID-4/1.5 IRC5 M2004 robot – mechanical components only Number of axes: 6 Bodpfxey Th Txs Adiedc Max. payload: 4 kg Max. working range: 1500 mm Year of manufacture: 08/2013 Scope of supply: Robot mechanics In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Two-week start-up warranty. No further warranty.

Condition: used, Year of construction: 2007, ABB Robotics IRB 2400/16 IRC5 M2004 robot, Foundry – mechanics only Number of axes: 6 Max. payload: 16 kg Max. working range: 1550 mm Bdjdpfoy Th Amjx Adioc Year of manufacture: 2007 Scope of supply: Robot mechanics In addition, spare parts are continuously available in stock. The robot is fully functional and can be inspected at any time. Two-week commissioning guarantee. No further warranty.

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 1206J-E70TTAG, General information Field of application: Construction Weights Empty weight: 3.651 kg Functional Generator capacity: 200 kVA Bdjdpex S Umvefx Adioc Dimensions of cargo space: 409 x 142 x 237 cm CE mark: yes Other information Fuel consumption: 32.4 Liter / Hour at 75% Load Generator: FG WILSON LL5114F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 822 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: excellent (used), Year of construction: 1998, Year of manufacture: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Serial number: 590 097 Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Reach: 250 mm Weight: 18,900 kg + Tools Bdedpfswn Hfiox Adiec The machine is not fully operational; the right-hand cylinder is leaking; the machine descends unevenly; the hydraulic pump is noisy

Condition: used, Flexible milling cell with 6-axis industrial robot ABB - CARAT model IRC5 / IRB 2400 M2004 Robot milling system with rotary change table and 2 workstations, robot cell Serial No. 24-51541 Year of manufacture: 2006 6-axis industrial robot ABB model IRB 2400/16 M2000 ABB IRC5 control unit with Tech-In panel HF milling spindle PERSKE model KRS 35.3-2, power: 1.2 kW, speed: 17,400 to 23,200 rpm Robot handling capacity: 16 kg Robot weight: 380 kg Table size (Table 1) with aluminum plate: 500 x 500 mm Table size (Table 2) with Pertinax plate: 600 x 600 mm Power supply: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck - The complete system is set up as a compact milling cell with a rotary change table - Control cabinet and robot controller cabinet are both compactly and solidly mounted on the milling cell - Motorized rotary indexing table (likely WEISS brand) with fixed indexing step: 2 stations = 180° - Rotary table, rotation angle 180°, with partition wall and two clamping surfaces for fixtures - While one side of the rotary table is being milled, the other side can be loaded with new workpieces in parallel - Front safety guard with light barrier for monitoring during 180° table rotation Space requirement: Length 500 cm x Width 190 cm x Height 252 cm Length with front safety guards: 500 cm Length without front safety guards: 400 cm Weight of milling cell approx. 4,000 kg Very good condition Bedpfx Adeyaq Nueijdc The milling cell was used as a machining center for milling aluminum sheets and deep-drawn aluminum parts. Edge machining, milling cut-outs, drilling, etc. Also suitable for plastic processing or similar applications. If interested, please request a video from us.

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Bdedox S Hm Ispfx Adisc Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: good (used), functionality: fully functional, FOR SALE: Ursviken Optima 200 4.1/3.15 – High-Quality Swedish Press Brake Available for purchase is a heavy-duty and high-precision Ursviken Optima press brake. Ursviken machines are world-renowned for their robust design and long-term accuracy in demanding metal fabrication environments. Technical Specifications: Model: Optima 200 4.1/3.15 Year of Manufacture: 1995 Press Capacity: 2000 kN (200 Tons) Working Length: 4100 mm (Distance between uprights: 3150 mm) Max Working Pressure: 31.5 MPa Bdedpfx Adey Rvc Nsijc Stop Time: 67 ms Safety Distance: 264 mm Machine Weight: approx. 13,700 kg Key Features: CE Certified: Meets European safety standards. High Capacity: 200-ton press force and a 4-meter bed enable heavy-duty bending of large workpieces. Swedish Engineering: Manufactured in Skellefteå, Sweden, ensuring exceptional durability and industrial reliability. Maintenance: Documented safety inspection history available. An ideal workhorse for any metalworking shop requiring professional-grade bending capabilities and dependable performance.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 13,006 h, functionality: fully functional, machine/vehicle number: 190433, turning length: 1,050 mm, turning diameter: 660 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 1,050 mm, controller model: Mazatrol Matrix, The technical data is based on manufacturer information. The seller cannot guarantee its accuracy! Operating times according to control system: Total: 5,025 h Automatic machining: 1,866 h Pure machining RV1: 1,037 h Pure machining RV2: 298 h Operating time: 13,006 h Tool type: Capto C6 Tool changer: 72 positions Turret: 9 positions Dimensions (L x W x H): approx. 5 x 3 x 3 m TECHNICAL DETAILS Max. turning diameter: 660 mm Diameter over bed: 760 mm Turning length: 1,050 mm X-axis: 580 mm Y-axis: 150 mm Z-axis: 1,050 mm Main spindle speed: 5,000 rpm Bedpfx Aoy Slqfodiedc Counter spindle speed: 5,000 rpm Milling spindle: 12,000 rpm MACHINE DETAILS Control system: Mazatrol Matrix Main circuit: 3AC Main circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current draw: max. 84 A Main motor voltage: 400 V Rated power: 91.8 kVA Weight: 11,800 kg EQUIPMENT Bar feeder

Condition: ready for operation (used), Siemens 1FT5106-1AC71-1AH0 servomotor SN: EF488282802004 with 1FU1050-6MC 20.0 mVmin and EBD 4M 24V - 34W holding brake, professionally overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. Bedpfoy Rcgzjx Adijdc

Condition: used, Year of construction: 2008, functionality: fully functional, ABB Robotics IRB 1600 8/1.45 IRC5 M2004 Robot, complete Bedoy Rkutspfx Adiedc Controller: IRC5 M2004 Number of axes: 6 Max. payload: 8 kg Max. working range: 1450 mm Year of manufacture: 2008 Scope of delivery: robot, controller, cables, teach pendant, circuit diagrams Spare parts are continuously available from stock. The robot is fully operational and can be inspected at any time. 2 weeks commissioning warranty. No further warranty.

Condition: used, Year of construction: 2014, functionality: fully functional, ABB Robotics Robot IRB 2600 20/1.65 IRC5 M2004, mechanics only Number of axes: 6 Max. payload: 20 kg Bdjdpfx Adoy Rktpjisc Max. working range: 1650 mm Year of manufacture: 9/2014 Scope of delivery: robot mechanics only Additionally, spare parts are always available from stock. The robot is fully functional and can be inspected on request. 2 weeks commissioning warranty. No further warranty provided.