Used Manual Grinder for sale (14,137)

Condition: excellent (used), Year of construction: 1994, center height: 100 mm, grinding length: 380 mm, total width: 1,500 mm, total length: 1,300 mm, total height: 1,350 mm, grinding diameter: 200 mm, spindle speed (max.): 1,800 rpm, overall weight: 2,100 kg, pivoting range: 10 °, Centre height: 100mm Grinding Ø: 200mm Grinding length: 380mm Grinding stone dimensions:300 x 50 x 127mm Grinding stone speeds: 1800Rpm Table inclasement: 10° Tailstock: 4Mk Length: 1300mm Nwodpfx Aeyu Nqgekusg Width: 1500mm Height: 1350mm Weight: 2100kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, grinding length: 1,200 mm, grinding width: 600 mm, total length: 3,500 mm, total width: 1,875 mm, feed length X-axis: 1,320 mm, feed length Y-axis: 730 mm, feed length Z-axis: 480 mm, feed rate X-axis: 1,320 m/min, feed rate Y-axis: 730 m/min, grinding wheel diameter: 350 mm, table length: 1,200 mm, table load: 1,400 kg, table width: 700 mm, Surface grinder LGB France - R12070SM MACH-ID 9600 Make: LGB France Type: R12070SM Year: 2009 X - Travel: 1320mm Y - Travel: 730mm Z - Travel: 480mm Table Length: 1200mm Table Width: 700mm Table load: 1400 Grinding stone dimensions:350 x 50 x 127mm Power: 16kW Speeds: 1500Rpm Nwjdpfx Asy Edctjkusg Length: 3500mm Width: 1875mm Height: 2250mm Weight: 4500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1994, total length: 2,950 mm, total width: 2,100 mm, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 400 kg, feed rate X-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, grinding wheel diameter: 350 mm, table length: 600 mm, table width: 400 mm, Digital read out system position slides 5 stones and flanches Nwodpfx Aeyvhxmskusg Coolant and Filtration system CE Mark Levelling pads included  Full set off books  X - Travel: 650mm Y - Travel: 400mm Z - Travel: 400mm Table Length: 600mm Table Width: 400mm Table load: 400 Feed rate X-Axis: 0-5000mm/min. Feed rate Z-Axis: 0-5000mm/min. Grinding stone dimensions:350 x 127 x 50mm Power: 6kW Speeds: 1400Rpm Cooling system: Yes Feed rate Y-Axis: 0-5000mm/min. Length: 2950mm Width: 2100mm Height: 2000mm Weight: 2550kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, total length: 9,800 mm, total width: 4,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 5,000 m/min, table length: 3,000 mm, table load: 6,000 kg, table width: 1,200 mm, power: 22 kW (29.91 HP), Surface grinder Ziersch - Z1030 MACH-ID 9597 Make: Ziersch Type: Z1030 Control: Mitsubishi Touch Year: 2018 X - Travel: 3500mm Y - Travel: 1100mm Z - Travel: 1100mm Table Length: 3000mm Table Width: 1200mm Table load: 6000 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:500 x 100 x 203mm Power: 22kW Speeds: 3000Rpm Cooling system: yes Feed rate Y-Axis: 3000mm/min. Length: 9800mm Width: 4000mm Nwjdpjy En Dnsfx Akusg Height: 4500mm Weight: 27500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Nwedevvvw Espfx Akueg Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2008, feed length X-axis: 5,500 mm, feed length Y-axis: 650 mm, feed length Z-axis: 750 mm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, table length: 5,500 mm, table width: 750 mm, Profile grinder MAEGERLE - MGC-L 560 Surface, Profile grinding machine 5600 mm CNC gear rack grinding machine Automatic grinding head B-Axis Grinding head ca 20 gr swivel ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) Nwsdpfxsx Swqwo Akuog Pendel opperation ( double table) Dresser automatic Table dresser X - Travel: 5500mm Y - Travel: 650mm Z - Travel: 750mm Table Length: 5500mm Table Width: 750mm Feed rate X-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Grinding stone dimensions:600 x 300mm Power: 115kW Speeds: 8000Rpm Cooling system: Yes Feed rate Y-Axis: 20000mm/min. Length: 10700mm Width: 4700mm Height: 3800mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1971, condition: excellent (used), CNC Dresser KW with Siemens 840D new in 2002 HeidenHain measuring scales Siemens Servo engines Crankshaft and External grinding Large steady rest package Large stone and flanch package Centre height: 316mm Grinding Ø: 632mm Grinding length: 3000mm Grinding stone dimensions:800 x 305 x 105mm Grinding stone speeds: 1000Rpm Table inclasement: 9,1° Coolant system: Yes Filtration: Yes CNC Dresser KW with Siemens 840D new in 2002 HeidenHain measuring scales Siemens Servo engines Crankshaft and External grinding Large steady rest package Large stone and flanch package Length: 10100mm Width: 2600mm Height: 2300mm Nedpem Twz Aefx Akuswg Weight: 15000kg

Condition: good (used), total width: 3,500 mm, total length: 19,000 mm, total height: 2,100 mm, workpiece weight (max.): 6,000 kg, grinding diameter: 850 mm, grinding length: 6,000 mm, center height: 425 mm, Cylindrical grinder Schmaltz - RM 82/6000 MACH-ID 9492 Make: Schmaltz Type: RM 82/6000 Centre height: 425mm Grinding Ø: 850mm Grinding length: 6000mm Grinding stone dimensions:1100 x 80 x 560mm Nwodpfxey Dr Eas Akusg Grinding stone speeds: 700Rpm Table inclasement: -5 to +5° Tailstock: 160 x 100Mk Length: 19000mm Width: 3500mm Height: 2100mm Weight: 31000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: GG220N-15839, overall weight: 4,950 kg, input current: 92 A, input voltage: 400 V, year of last overhaul: 2025, For sale: double edge machine with 2 x 10 cup wheels and corner deburring function. This is a single machine with a maximum working width of 2500 mm. The machine is still connected and can be tested at any time. Nwedpfjxzgrtex Akusg

Condition: used, Year of construction: 1970, total height: 1,700 mm, total length: 1,400 mm, total width: 900 mm, Colour: Grey Empty weight: 500 kg - Year: 1970 - Documentation available: No - CE certificate present: No - Serial number: CH - Control: Conventional - Motor power: 1.4kW - Transport dimensions: 1400mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information Nedpfxjyxqzco Akuswg VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Colour: Grey Empty weight: 900 kg Price: On request - Details: - └ Description: Bad bearings Nwsdpfx Aksyr Rnzoueg - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, total height: 1,600 mm, total length: 1,300 mm, total width: 1,500 mm, Colour: Grey Empty weight: 900 kg Price: On request - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 108088 - Motor power: 1.0kW - Transport dimensions: 1300mm x 1500mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Nwjdpfx Akeytbc Sjueg

Condition: used, total height: 2,650 mm, total length: 4,700 mm, total width: 2,100 mm, Colour: Grey Empty weight: 5.500 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 700 - Table width [mm]: 1200 - Table depth [mm]: 400 - Magnet width [mm]: 1200 - Magnet depth [mm]: 300 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 4700mm x 2100mm x 2650mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Nwjdpfox Dkggsx Akusg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,620 mm, total length: 1,750 mm, total width: 1,400 mm, Colour: Grey Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs]: 3 - X-axis travel [mm]: 500 - Y-axis travel [mm]: 230 - Z-axis travel [mm]: 330 - Table width [mm]: 720 - Table depth [mm]: 200 - Magnet width [mm]: 460 - Magnet depth [mm]: 180 - Options: External cooling - Transport dimensions: 1750mm x 1400mm x 1620mm (l x w x h) - Transport weight [kg]: 2500kg Nwsdpsyh Amljfx Akujg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1994, Colour: Grey Empty weight: 2.000 kg - Year: 1994 - Documentation available: No - CE certificate present: No - Serial number: 8139 - Drive system: Conventional - Power [kW]: 7.1 - Number of axes [pcs]: 3 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 600 - Table width [mm]: 1500 - Table depth [mm]: 400 - Magnet width [mm]: 600 - Magnet depth [mm]: 300 - Max. grinding wheel diameter [mm]: 300 - Max. grinding wheel thickness [mm]: 50 - Main spindle power [kW]: 4.5 - Max. spindle speed [rpm]: 1750 - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nwsdpfxjyvf Tgs Akuog Lukas van Rossum

Condition: good (used), mileage: 538,605 km, power: 346 kW (470.43 HP), first registration: 02/2004, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, fuel: diesel, color: white, gearing type: mechanical, number of gears: 12, emission class: euro3, suspension: steel, permissible axle load (axle 1): 8,500 kg, permissible axle load (axle 2): 10,800 kg, permissible axle load (axle 3): 9,200 kg, Year of construction: 2004, = Further options and equipment = - Parabolic suspension - Power take-off (PTO) = Notes = Scania T124-470 6x2 - Tipper - Manual gearbox - Full steel suspension - Robson Drive - New engine - Torpedo/bonnet cab MY: KM: 538,605 YS2T6X20001293868 Tipper Robson drive Manual gearbox Full steel suspension Engine has been replaced Nwedpsy Rn Epofx Akueg = Further information = Technical details Number of cylinders: 6 Engine capacity: 12,000 cc Gross vehicle weight: 28,500 kg Axle configuration Suspension: Leaf spring suspension Front axle: Tyre size: 385/65R22.5; Max. axle load: 8,500 kg; Steering axle; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 1: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 10,800 kg; Tyre tread left inner: 30%; Tyre tread left outer: 30%; Tyre tread right inner: 30%; Tyre tread right outer: 30% Rear axle 2: Tyre size: 315/80R22.5; Twin tyres; Lift axle; Max. axle load: 9,200 kg; Tyre tread left inner: 30%; Tyre tread left outer: 30%; Tyre tread right inner: 30%; Tyre tread right outer: 30% Functional Tipping body: rear tipper Condition Technical condition: average Visual condition: good Further information Please contact VAEX The Truck Traders for more information.

Condition: excellent (used), mileage: 994,522 km, power: 338 kW (459.55 HP), first registration: 07/2011, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 5,100 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,000 mm, total width: 2,500 mm, total height: 3,600 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 6,500 mm, Year of construction: 2011, Equipment: differential lock, General information Cab: Spacecab, single Nsdpfx Aksy Rtrusujwg Registration number: BZ-HT-71 Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Drivetrain Make of engine: DAF Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/65 R 22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Suspension: air suspension Rear axle 2: Tyre size: 315/70 R22.5; Double wheels; Max. axle load: 7500 kg; Steering; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Suspension: air suspension Weights Empty weight: 11.610 kg Carrying capacity: 16.388 kg GVW: 28.000 kg Functional Tipper: Back Condition Technical condition: very good Visual appearance: very good Number of keys: 2 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: excellent (used), mileage: 1,195,177 km, power: 309 kW (420.12 HP), first registration: 09/1998, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 1998, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - 2 sleeping places - Armrest - Disc brakes - Front suspension: Leaf - High sleeping cabin - Open roof - Rear suspension: Air - Sleeper cabin - Sper = More information = Tyre profile: 50% Nedpfey Rq T Nex Akujwg Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: like new (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, overall weight: 850 kg, type of input current: three-phase, Manual Lisec 2k sealing machine for Polisulfide, year 1998, will be technically and optically completely overhauled prior delivery (will look and work as new) Nsdpfx Aksy Tl R Ieuswg The overhauled machine will be available from end of May/middle of June and can be seen in our overhaul warehouse in Oroahsza/Hungary. The machine is now running on PS but can be modified to Silicone on demand as an option. Photos will be available after overhaul has been finished.

Year of construction: 2005, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE CENTRE HEIGHT: 171 mm DISTANCE BETWEEN CENTRES: 430 mm MAX GRINDING LENGTH: 400 mm MAX ADMITTED LOAD: 150 Kg X-AXIS TRAVEL: 170 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS: 12 m/min SPINDLE: 830 rpm; 24 Nm Nwodpfx Akoyvlxdjusg GRINDING WHEEL SIZE: 508 x 80 x 203,2 mm MOTOR POWER: 7,5 kW CONTROL UNIT: FAGOR 8055 TCO WEIGHT: 4500 Kg ACCESSORIES: PAPER FILTER ; FUME EXHAUSTER ; MAGNETIC FILTER ; GRINDING WHEEL BALANCER NOTE: 0-9° SWIVELLING TABLE; SWIVELLING CHUCK; INVERTER FOR KEEPING THE PERIPHERAL EXTERNAL GRINDING WHEEL SPEED STEADY; PIECE LOCKING DEVICE WITH PNEUMATIC SYSTEM; HYDRAULIC OPENING TAILSTOCK AND DEVICE FOR SEARCHING THE CYLINDRICITY

Condition: used, mileage: 340,000 km, power: 353 kW (479.95 HP), first registration: 03/2016, fuel type: diesel, overall weight: 32,000 kg, gearing type: mechanical, emission class: euro6, loading space length: 5,900 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, MAN TGS 41.480 First registered 03.2016 340,000 km 8x6 Leaf/Leaf suspension 41-ton chassis Hub reduction axle Manual transmission 6-speed retarder Heavy-duty rock tipper Rock tipper body Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... ... Roman We will gladly take care of your financing or leasing needs. Nwedpfsyqk Rtsx Akueg EU sale: net price upon presentation of company documents and VAT number. VAT deposit: 2000 EUR. Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, power: 5.65 kW (7.68 HP), table length: 2,780 mm, table width: 1,000 mm, Johannsen belt sander with electric height adjustment, table size 2780x1000 mm Nwedpfxsx Rbvhe Akusg

Condition: good (used), functionality: fully functional, machine/vehicle number: 542, Equipment: Precision six-jaw chuck -- Cylindrical grinding device -- Njdpfxoy St Ifs Akuswg Dividing device -- Coolant device -- Grinding wheel holder -- Grinding wheels --- Operating instructions .

Year of construction: 2025, condition: new, MANUAL STRETCH WRAPPERS THE LATEST INCREDIBLE INNOVATIVE IDEA FROM ITALDIBIPACK TWO SYSTEMS, THREE SYSTEMS IN ONE JOLLY WORK LIFTER & STRETCH WRAPPER Nwedpfx Akjmv Eixousg Thanks to the “TRANSFORMER” ® device, the lifter and pallet stacking assistant, Jolly Work, can be instantly transformed into stretch wrap without the need to attach or remove any parts. JOLLY WORK TO SAVE TIME, MONEY, PERFORMANCE AND HEALTH! Luckily Hercules has arrived... In terms of health and safety at work, manual lifting of heavy objects and manual wrapping of stretch film pose serious health risks. Jolly Work increases productivity and profitability of work, improves the result: it helps and enables stretch film wrapping of higher loads, and in the lifting version it is a great help in preparing the load. TECHNICAL SPECIFICATIONS TECHNICAL CHARACTERISTICS IN LIFTING MODE Dimensions of the lifting plate: 500 x 450 mm Maximum lifting weight: up to 50 kg with decreasing increments Maximum lifting height: 1500 mm / 50 kg Aluminum / wood lifting plate TECHNICAL FEATURES IN STRETCH WRAPPER MODE Standard film 23 microns / Pre-stretched film with 9-10-12-15 µm thickness Outer film roll diameter 105 mm Stretch film roll height 440/450 mm / 500 mm optional A maximum core holder height of 460 mm / 520 mm (500 mm film) Inner core Ø: 50 mm Maximum pallet height: 2000 mm Adjustable film transport speed Regulation of stretch film tension by mechanical brake Quick-release system with the set brake level

Condition: good (used), mileage: 914,740 km, power: 338 kW (459.55 HP), first registration: 11/2017, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 3,580 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, traction control, = Additional Options and Equipment = - 2nd diesel tank - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Manual - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric upholstery = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 7,776 kg, Gross weight: 20,500 kg, Total tank capacity: 1,160 liters, 2nd diesel tank, Fifth wheel height: 112 cm, Fifth wheel: Fixed, Number of diff locks: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting: Halogen lamp, Lane departure warning system, Bluetooth, Engine output: 338 kW (453 hp), Fuel: Diesel, Euro standard: 6, Transmission type: Manual, Gearbox manufacturer: ZF, Gears: 16, Clutch pedal, Power steering, ABS, ASR, Starter battery, Central locking, Seating configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: ZF, 16 gears, manual transmission Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steering; Tire tread left: 10 mm; Tire tread right: 8 mm; Suspension: leaf spring Axle 2: Twin tires; Tire tread left inner: 13 mm; Tire tread left outer: 14 mm; Tire tread right inner: 12 mm; Tire tread right outer: 11 mm; Suspension: air suspension Weights Unladen weight: 7,776 kg Payload: 12,724 kg GVW: 20,500 kg Condition Technical condition: good Visual condition: good Damage: none Number of keys: 2 Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Easy! • Large, rapidly changing inventory • Recognisable quality • Fair prices • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates quickly arranged • Qualified technical services • The security of “recognisable quality” • And more... Please visit our website for special offers and the complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Njdpfx Aoy Rd Dhokujwg Ask us directly about our European warranty package.