Used Marking And Spotting Plate for sale (22,316)

Condition: excellent (used), Year of construction: 1996, overall weight: 4,200 kg, total height: 350 mm, total length: 3,500 mm, total width: 1,750 mm, plate height: 350 mm, plate width: 1,750 mm, groove spacing: 250 mm, T slotted bed plate STOLLE - DT MACH-ID 9373 Make: STOLLE Type: DT Year: 1996 T slotted bed plate STOLLE - DT MACH-ID 9373 Isdpozcn Iyefx Anwjth Make: STOLLE Type: DT Year: 1996 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2000, control type: NC control, actuation type: hydraulic, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), 4 roll plate bender Davi Promau - MCB 3037 MACH-ID 9613 Make: Davi Promau Type: MCB 3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication Isdpfezcnuyox Anwjth Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm Itsdpfx Anov Tzphsweh - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display Itsdozcqy Sepfx Anweh * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: used, mileage: 403,000 km, power: 243 kW (330.39 HP), first registration: 11/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro5, loading space length: 7,676 mm, loading space width: 2,528 mm, loading space height: 2,696 mm, Year of construction: 2012, Equipment: air conditioning, Manufacturer Volvo Model FM 330 4x2 7,7 m Curtainsider and Taillift Year 2012 Condition Good Serial Number YV2J1D1A4DA736557 Ref. nr. 1508060 Reg. date: 16-11-2012 Itodpfxex R Rn He Anweh Last seen: 18-11-2025 Hk: 330 Km: 403000 Gearbox: I-shift Eurotype: 5 Diesel tank: 1 Tank liter: 530 Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Engine brake: VEB Tire Size: 315/70R22,5 - 315/70R22,5 Front suspension: Air Suspension rear: Air Wheelbase: 5600 mm Toolbox: ? Total weight: 18000 Kg Net weight: 9150 Kg Load capacity 8850 Kg Inside length: 7676 mm Internal width: 2528 mm Interior height: 2696 mm Lift Brand: Zepro Lift capacity: 2500 Kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, A complete weighing and bagging system previously used for packing hard-boiled sweets, but suitable for all manner of snack foods, confectionery, nuts, seeds, etc. Features the following equipment: 1 x AST-2-1 stainless-steel hopper and vibratory feeding pan with manual gate. Hopper internal dimensions - 795mm long x 795mm wide. Overall dimensions - 1100mm long x 880mm wide x 1150mm high. 1 x AST-3-5 stainless-steel bucket elevator. Each bucket dimensions - 380mm long x 115mm wide x 60mm high. Overall dimensions - 2650mm long x 680mm wide x 3400mm high. 1 x A10 -10-head multi-head weigher with touch-screen control panel and 1.6L smooth weighing pans. Programmable for up to different 50 programs. 1 x Stainless-steel gantry with height-adjustable feet and wheels. Overall dimensions - 1220mm wide x 1320mm deep x 1680mm high. 1 x Gainsborough Engineering Ltd GV2K1 vertical form, fill and seal bagging machine. Serial number – GV081395. Date of manufacture - 2008. Sealing bars: Horizontal - 250mm long. Vertical - 250mm long. Bag size range: Minimum - 50mm x 50mm. Maximum - 200mm x 200mm. Output / Speed - up to 70 packs/minute depending on pack dimensions. Electrical requirements - 230 V / 50 hz /1 phase. Power - 13 Amps. 2 x Markem Imaje SmartDate 5 thermal transfer printers (1 x 53mm and 1 x 128mm). 1 x Gainsborough Engineering Ltd outfeed inclined conveyor. Belt dimensions - 2000mm long x 285mm wide. Height adjustable outfeed height (max. height 1100mm). Itjdpfxjzaw Nue Anwsh Overall footprint of system (in current setup) - 3.7m long x 3.5m wide x 3.4m high.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Model - ALritma S. Serial number - 2012050125405. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request. Itedjy Uni Njpfx Anwoh

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, STC-Ref:G-022-7715 Heidelberg Plattenabkante // Platebender, Year: 2008 Itsdpfxezcuzyo Anwoh equipped: - suitable for Heidelberg SM / CD - Plate bender --> available: 06/2026

Condition: used, mileage: 5,800 km, first registration: 10/1983, overall weight: 6,000 kg, color: green, gearing type: mechanical, number of seats: 1, Year of construction: 1983, Equipment: all wheel drive, trailer coupling, MB Trac 700 K Road and Rail Two-way Rail guide Coupling rod Itsdei R Ag Tjpfx Anwsh UVV07.2012   approx. 1500 h orign.   is in daily use

Condition: used, mileage: 8,000 km, first registration: 10/1987, fuel type: diesel, overall weight: 6,500 kg, color: orange, gearing type: semi-automatic, number of seats: 1, Year of construction: 1987, Equipment: all wheel drive, trailer coupling, MB trac 700 K two-way Road and Rail very good condition Own vehicle Torque converter Wagon brake system 300 to UVV 07.2012   approx. 1780 h orign.   Itedpfsi R Ahbsx Anwoh

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Cooling water flow rate: 4 l/min Electrode force: 17 to 390 daN Iodpfx Ajx Ic T Ajnwsth Open circuit voltage: 2 to 3.2 V Stages: 4 Throat depth: 235 mm Dimensions: L 750 x W 350 x H 1100 mm Weight: 77.5 kg All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 1985, 1 used spotting press Manufacturer: REIS Model: TUS 160 OK 200 Year of manufacture: 1985 Technical details: Press force: 200 t Table length: 2200 mm Table width: 1550 mm Installation height: 2200 !! mm Ram return force: 6,000 kg Iedpfx Asyb Stqenwjth Table load capacity: 10,000 kp Total power requirement: ? approx. 25–30 kW Machine weight: approx. 30 t Space requirements: approx. 4 × 7 × 7 m Shipping dimensions: approx. 13.4 × 3 × 3 m

Condition: good (used), 2 used T-slot angle plates Height: 1500 mm Width: 1000 mm Depth: 500 mm 10 transverse slots Itodpfxoy Iakfs Anwoh 3 longitudinal slots First-class surface finish

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Itsdpfxezcpu Uo Anwoh Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning All information without guarantee.

Condition: good (used), functionality: fully functional, Year of construction: 2016, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 180 mm, side roll diameter: 160 mm, roller diameter: 180 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 600 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, total length: 4,000 mm, total width: 1,100 mm, total height: 1,300 mm, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Plate bending roll 2000 X 8/6 mm year 2016 PYRAMID LINEAR GUIDEWAYS DUAL PRE-PINCH 3-ROLL Bending capacity -Plate width 2000 mm -Rolling plate thickness 8 mm -Prebend thickness: 6 mm Rolls dimensions: Useful length 2050 mm top roll D 180 mm side rolls D 160 mm Configuration of the machine Rolls hardened induction treatment, high strength surface of the 3 rolls Iodezff Uuspfx Anweth Power driven total on the 3 rolls Conical bending hydraulic attachment Re-rolling system welded shells rounding. Opening hydraulic front drop-end Extended shafts front side for use as profile bender. Electric 3 phase 400/50 Vac, power 7,5 Hp. Digital position readouts of the bending rolls.

Condition: used, Year of construction: 2000, plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 Iodpfx Anocqxv Tswsth 7. Bacher 2032 2-hole 225 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD

Condition: used, length 450 mm width 140 mm height 100 mm 2 magnetic plates with control unit Itsdpfxozcghrj Anwjh approx. 450 x 140 x 100 mm

Condition: used, length 900 mm width 505 mm height 110 mm weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 900mm Width: 505mm Height: 110mm Weight: 310kg Ijdpfxjzcgkys Anwoth We have two identical magnetic chucks with the same dimensions. See S9061

Condition: used, length / mm Iedpezcgiiefx Anweth width / mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Parameters for the advertisement Manufacturer: MG Model / capacity: MG 2000 × 25/20 mm Year of manufacture: 1998 Ijdpfxozd Evps Anwoth Type of machine: hydraulic 4-roll sheet metal bending machine Number of rolls: 4 Working length of rolls: 2,000 mm Max. sheet metal thickness: approx. 25/20 mm depending on the material and bending method Pre-bending: yes, thanks to the 4-roll design Drive: hydraulic Control: separate control panel Application: bending sheet metal, manufacturing of casings, tubes, cones, and welded structures Condition: excellent Inspection possible: by arrangement

Condition: good (used), functionality: fully functional, Year of construction: 1999, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller model: 4 axis digital readout, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 370 mm, roller diameter: 370 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 1,900 mm, sheet thickness (max.): 40 mm, overall weight: 15,000 kg, total length: 5,300 mm, total width: 2,100 mm, total height: 2,400 mm, power: 25 kW (33.99 HP), input voltage: 380 V, number of digital displays: 4, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 roll plate bending machine Faccin model hydraulic 4HEL2,5 30/25 year of make 1999 Linear guideways rolls motion plate width 2500 mm plate thickness 30 mm rolling capacity 2500 x 30 mm prebend 2500 x 25 mm top roll size 370 m lower roll size 350 mm surface on the rolls 2550 mm Itjdpszd Sw Tefx Anweh voltage 380/50 power installed 25KW configuration installed Hardened surface of the 4 rolls conical plate bending hydraulic open drop-end digital position readout of the rolls. NC programmable 4 axis Control panel electric

Condition: used, Year of construction: 2019, 1 unit of SHERPA PPS disc brake testing stand with digital LED display unit SHERPA AZE-020-ECO-D, self-disassembly feature Color: as shown in the pictures, according to the images and inspection Itsdpfx Aszcmfdonwsh Year of manufacture: 2019 Condition: used Location of the goods: Hall 2 Payment method: prepayment by bank transfer Shipping: self-collection only from the Hofgeismar location

Condition: used, For inquiries regarding the road plates, please contact Mr. Herden (at ). Road plates / ground protection mats / incl. frame / 15 mm thickness / NEW / in stock & immediately available Price for 30 road plates incl. transport frame: €4,400.00 net / €5,236.00 gross - Dimensions (mm): 2,400 x 1,200 x 15 - Material: Hard plastic - Weight per plate (kg): 43 - Load capacity up to (t): 50 Properties of the transport frame: Material: Steel, galvanized The frames are stackable Plastic ground protection mats are the ideal solution for the temporary paving of construction site roads, meadows, during roadworks and events, during demolition work, and in landscaping projects. Plastic road plates protect sensitive surfaces (such as lawns, paved driveways) and prevent vehicles from getting stuck in the mud. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (at ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. Itsdpfx Anezcuc Dowsh We are the official Westtech sales and service partner. We are the official OilQuick sales and service partner. We are the official Holp sales and service partner. We are the official Magni telehandler sales and service partner. We are the official DMS sales and service partner. We are the official Gierking GMT sales and service partner. We are the official Weber MT sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Please contact Marius Herden for further information.

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop - Documentation - 400V Isdpfxexn Rrqo Anwsth

Condition: refurbished (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: SGSHK, compressed air connection: 6 bar, working width: 760 mm, warranty duration: 6 months, operating speed: 1,000 mm/s, Komfi Sagitta 76 with Hot Knife and B1 Stacker Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year. Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers, elements for quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils. Also digitally printed job can be easily and conveniently processed on the machine. Well suited and highly applicable for both commercial printing and the packaging industry. Energy saving zone heating system with fastest heat up time. Max. production speed 60 m/min (3600 B1 sheets/h); 50 m/min with hot knife (3000 B1 sheets/h) Max sheet size 760 × 1120 mm (up to 1300 mm) Paper weight 115-600 g/m² Machine dimensions (incl. delivery desk) 4.25 x 1.55 m Basic configuration Feeder: Komfi double action feeding head for reliable feeding even at high speed and small format. Front lay register for precise and constant sheet overlap. Compressor for feeder. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: Powerful pneumatic pressure system to ensure excellent laminating result. Adjustable distance stoppers to enable processing thick substrates and windows lamination. Air shaft for 3″ reel core laminating film. ”On-the-fly” height-adjustable spread roller for perfect smoothing of difficult film before lamination roller. Zone heating of the laminating roller saves energy when laminating small formats. Temperature sensor inside the cylinder for extremely precise regulation. PUR pressure roller for longer roller life. Separator & Delivery: Rotary separation knives for reliable film separation at high speed. Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable. Pneumatic driven separation roller. Automatic (pneumatic) skew wheel increases reliability of separation when processing wide range of jobs. Good to use for long sheets. Adjustable speed of snapping roller for perfect separation of difficult jobs. Jogging table. SW functions included Stop on the sheet overlap to avoid waste sheets. Zero overlap possibility for processing thick substrates. Automatic pressure and temperature detection to prevent irregularity in lamination quality. End of job function for easy rewind of film. Sensor for sheet separation detection and jam detection. Job settings memory Built-in internet connectivity for service support. Available options Film slitter to cut film to the requested width. Additional On roll perforator. Integrated or External Effect foiling device (OTF). Universal pallet positioning kit enables to load variety of different pallets into the machine. Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Iodszdnpxjpfx Anweth Windows lamination kit. Set of chilling rollers placed between laminating unit and separator to reach high quality embossing or windows lamination. Automatic sheet stacker (pallet stacking).