Used Masterflex 203 A Matic for sale (67,706)

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Ledpfxey Tu Sbj Akysrn Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: used, Year of construction: 2004, operating hours: 168 h, functionality: unexamined, machine/vehicle number: MA 3004, working width: 920 mm, stack height: 80 mm, product height (max.): 80 mm, control cabinet width: 400 mm, control cabinet length: 100 mm, control cabinet height: 150 mm, motor model: Nordson 3400 V, WRAPMATIC GRM Folio ream wrapper includes logic programs, cable cabins, Siemens operating panel, frequency transformers, sensors, light shells, security lines, Nordson electrical motors, gearbox, transformers, AC source, ream counters, I/O-cards, main lines pressure monitoring switch, roller conveyors, belts, carousel, hot melt pot + hoses, pneumatic cylinders and lot of mechanical details. Capacity 14 reams per minute. The machine operated for around two weeks only as trial. Located in Alexandria, Egypt. Width : 420-1000 mm Length : 530 - 1400 mm Ream thickness (max): 80 mm Ream thickness (min): 15mm 4 position carousel unwind: Roll diameter 800/1000mm Pallet height: 1800mm incl pallet Type of gluing: Hot melt glue Power: volt 500 - 50 Hz PLC: Siemens S7 Lsdpsxr T Ezofx Akyorn Air pressure: 6 bar Location: Alexandria, Egypt

Year of construction: 2011, condition: like new (used), functionality: fully functional, COLIMATIC THERA Lrjdpfx Aov Ablhekyon ID.NO. 2902 Colimatic Thera 250 deep draw machine in new condition! Year model 2011 built-in vacuum pump Busch 63cc. Round tools with a diameter of 110 mm. Foil width 422 mm, rejection 170 mm Dimensions 345 x 100 cm H 190 cm.

Year of construction: 2003, condition: good (used), functionality: fully functional, Equipment: documentation/manual, ITALMATIC Autoclave AIT ø 2600x5000 year 2003, in good condition, available now, fully functional P.S.: 13 barg Tmin/Tmax: +20 / +175 C Volume V: 33900 litres Ledey N Ubbepfx Akyern Fluid group 2: AIR Module: B+F Test Pressure TP: 20,7 barg CAT.: IV Inspection is possible by appointment.

Year of construction: 2025, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Ljdpfoff Agisx Akyorn Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: ready for operation (used), AUTOMATIC PALLET STRECH WRAPING MACHINE - PALLETIZER OCTOPUS COMPACT MADE BY HALOILA, FINLAND 30 PALLET PER HOUR VERY GOOD CONDITION VIDEO ATTACHED Lodpfsyb H Hfox Akyorn

Condition: excellent (used), Year of construction: 2004, Ready to use, in very good condition. Maintenance fully done. Ljdpfxsx Sybxs Akyorn VAT will not be added if the item is exported out of Estonia.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 077-Z2A-2147, This is a manual vacuum machine E 15 Basic from premium manufacturer Webomatic, built in 2019 – a compact tabletop vacuum machine with impressive packaging capacity. When you need to pack large products at high performance but have limited space available for a vacuum packaging machine, the compact yet powerful E 15 Basic is the ideal choice! You will receive an invoice with VAT shown separately. Our used equipment service includes: • 6-month warranty on all electrical components • Top-brand equipment at fair prices • Professional refurbishment, inspection and expert cleaning • Tested & fully functional – or your money back • Flexible shipping or collection options • Competent advice before and after purchase • Provision of user manuals, wiring diagrams & spare parts • Inspection in accordance with DGUV V3 Technical data: • Base frame included • Angled insert • GreenVAC • Machine dimensions: 490 x 610 x 470 mm (W x D x H) • Chamber dimensions: 430 x 500 x 180 mm (W x D x H) • Weight: net/gross approx. 83 kg / 91 kg • Pump: built-in 21 m³/h high-performance pump • Cycle rate: 2-3 cycles/min., depending on product size and required vacuum • Chamber made of high-quality stainless steel • Easy operation • Serial number: 077-Z2A-2147 Lredpfx Asx Drl Dskysn • Year of manufacture: 2019 Other information: • The vacuum packer for every application. • The E 15 Basic packaging machine is ideally suited for vacuuming and packing in kitchens, at weekly markets, in branch operations, or for meat packaging in hunting and game processing. It can also be used without difficulty for packaging sterile or sensitive medical products, electronics, or banknotes. Shipping: • Delivery or pickup by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by prior agreement

Condition: excellent (used), Year of construction: 2004, Sepamatic Sepa 2000 Separator SEPA 2000 separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Manufacturer: Sepamatic Model: Sepa 2000  Year: 2004 Drum Size: 1,3 mm Power: 7,5kW / 50Hz / 400V Capacity: Up to 4.000 kg/h (depending on product) Machine Dimensions LxWxH: 1.300×1.300×1.700 mm Lodpfxsy D H U As Akyorn Machine Weight: 1.400 kg.

Condition: excellent (used), Complete Grinding Room for bandsaw blades Ledpfx Askx E Sdekyern

Year of construction: 2018, condition: ready for operation (used), I sell the 4-side spraying automat Automatica 90° feeding system Lrsdsw Ancfopfx Akyon 4 x 2 spraying guns from each side Feeding system with motors. Good condition. Available immediately.

Condition: used, Professional vacuum machine Webomatic C 50-W is designed for vacuum packaging and hermetic sealing of food products in butcher shops, restaurants, processing plants, supermarkets and professional kitchens. This model is an ideal solution for users who require high working capacity, reliable performance and extended product shelf life in daily professional use. The vacuum system removes air from the packaging, preserving freshness, quality, aroma and product structure. The machine is suitable for packaging meat, cured meat products, cheese, fish, ready meals and many other food items. Model C 50-W is equipped with a powerful Busch vacuum pump with 100 m3/h capacity, ensuring fast and efficient operation even with larger packaging volumes. The chamber size of 700 x 460 mm provides enough space for different product types and package sizes. Sealing bars sized 1 x 450 mm and 1 x 695 mm allow flexible packaging of different bag sizes and products. Stainless steel construction ensures long service life, high hygiene standards and easy maintenance. Stable industrial design makes this model an excellent choice for professional use. Technical specifications: Ledpfoy Iz S Rsx Akyjrn Machine type: Vacuum machine Manufacturer: Webomatic Model: C 50-W Power supply: 400 V / 3 Ph / 50 Hz Power: 2.2 kW Current: 5.4 A Vacuum pump: Busch RA 0100 E 541 Pump capacity: 100 m3/h Chamber size: 700 x 460 mm Sealing bar dimensions: 1 x 450 mm / 1 x 695 mm Overall dimensions: 830 x 660 x 1000 mm Material: Stainless steel Application: Vacuum packaging and sealing Use: Butcher shops, restaurants, food processing, professional kitchens Operation: Fast, efficient and reliable Maintenance: Easy and simple

Condition: good (used), Palamatic M7 Palpharmamove drum lifter tipper Stainless, Manual drum lifter and tipper, mobile, 250Kg safe working load Lredpfx Asyw Tc Hekyen

Condition: good (used), functionality: fully functional, In this offer you are purchasing a ‘Canon RCT 2 / II’ finishing option as good as new Object of sale: 1 x Canon RCT II suitable for various Canon models Counter readings: Total: Approx. 555 pages Ledpsu Rbb Nefx Akyjrn Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: excellent (used), Year of construction: 2011, We are pleased to present for Sale the Automatic transfer system TREC NT from Stork. Ledpfx Aswdibxekyjrn Manufacturer: Stork Type: TREC NT Year: 2011 Iasbor Igpgstt Shdfor Capacity: 13500bph Condition: Used/Very good

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M04L/6382, Offer Number: M04L/6382 Machinetype: pointing and pincing machine Make: INGRAMATIC Type: PA3 Constr. year: 1977 diameter range: 4-8 mm shaft length under head: 40-110 mm output pieces/min: 600 Location: In our warehouse Lodpfxswi Tbms Akyorn

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M04L/5692, Offer Number: M04L/5692 Machinetype: pointing and pincing machine Make: INGRAMATIC Type: PA2 Constr. year: 1976 diameter range: 1,7-6,4 mm Ljdpfowi Tb Hex Akyorn shaft length under head: 4,5-75 mm output pieces/min: 1000 Location: In our warehouse

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz Ledpfsff Huwjx Akyern • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Year of construction: 2015, condition: excellent (used), VMC 3 axis AMS super dart year of production 2015 Control FANUC MACHINE CAPACITY X - Axis Travel mm 600 Y - Axis Travel mm 450 Z - Axis Travel mm 500 Dist. From Spindle Face To Table Top mm 235 - 735 Table size mm 900 x 450 Max. load on table kgf 400 max spindle speed 15000rpm BT30 high cooling through the spindle automatic tool changer 20 tools weight machine 4500kg with machine chip conveyor with pomps low hours machine Lrjdpfxokvpnme Akyjn

Condition: good (used), Year of construction: 2003, Manufacturer: AXOMATIC Model: OPTIMA 800 Year: 2003 Weight: 700 kg Dimensions (L x W x H): 2.20 x 1.10 x 2.10 m Product description Automatic tube filling and sealing machine with volumetric dispenser for liquid, sticky, viscous, and pasty products. Equipped with: - Automatic tube feeding into carousel buckets - Tube position centering station with photocell detection - Tray with 8 interchangeable buckets (adaptable to tube dimensions) for transporting tubes to the packaging station - Supplied bucket size: 35 mm diameter - Interchangeable volumetric piston dosing station with stainless steel rotary valve - Currently fitted with one 40 ml piston (alternative piston sizes available on request from supplier) - Tube filling station with stainless steel nozzle and anti-drip device - Single-wall conical hopper, 50-litre capacity - Tube heating station using Leister heater - Sealing station with heated jaw clamps, featuring water circulation cooling Ljdpfeyr Nvksx Akysrn - Closing station with 1 pair of jaw clamps, enabling character embossing - Water circulation system for jaw cooling (currently supplied without chiller, but available on request) - Tube top trimming station for finishing cuts - Waste collection tank - Automatic discharge of finished tubes onto disposal chute - Programmable touch screen interface with Omron PLC control - Variable-speed motorized drive system - Protective enclosures with safety interlock doors - Stainless steel frame - Maximum output: approx. 50 tubes/min (approx. 3,000 tubes/hour) - Total electrical power: 5.5 kW, 380 V - Air consumption: 6 bar - Water consumption: 4 litres/hour This technical description is suitable for use on machinery trading platforms such as Machineseeker or TruckScout24.

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Lrjdpfx Asya H S Sjkyon Reel to reel lamination option

Condition: like new (used), Stainless vacuum packer, chamber dimensions 500mm x 430mm x 100mm, seal bars 400mm, timer / temp controls, mobile, 3Ph Lodpfxofhdt Ho Akyjrn

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 32 kg, warranty duration: 12 months, input voltage: 230 V, NUMATIC BMD 1000 S SINGLE DISC SCRUBBER The cleaning head is equipped with a new disc brush and a holder with a complete set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1000 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 32 kg Dimensions (L x W x H): 580 x 450 x 1185 mm INCLUDED: NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) NEW brown pad - very hard (cleaning of very dirty surfaces) NEW black pad - aggressive (cleaning (for very dirty surfaces) Lrjdpeyxb Adsfx Akyjn TENZI NORMAL Fluid 5 liters - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 31 kg, warranty duration: 12 months, input voltage: 230 V, NUMATIC NRP 1515 /S SINGLE DISC SCRUBBER The cleaning head is equipped with a new disc brush and a holder with a complete set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Lrjdpfx Aksyw R N Rsysn Motor: 1500 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 31 kg Dimensions (L x W x H): 560 x 450 x 1250 mm INCLUDED: NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) NEW brown pad - very hard (cleaning of very dirty surfaces) NEW black pad - aggressive (cleaning (for very dirty surfaces) TENZI NORMAL Fluid 5 liters - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 31 kg, warranty duration: 12 months, input voltage: 230 V, NUMATIC NRP 1515 /S SINGLE DISC SCRUBBER The cleaning head is equipped with a new disc brush and a holder with a complete set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1500 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 31 kg Dimensions (L x W x H): 560 x 450 x 1250 mm INCLUDED: NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) NEW brown pad - very hard (cleaning of very dirty surfaces) NEW black pad - aggressive (cleaning (for very dirty surfaces) TENZI NORMAL Fluid 5 liters - FREE Lrjdpoyw R Aqjfx Akyjn KEY FEATURES: Thanks to its design, the machine is highly maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A clearly legible and intuitive control panel.