Used Measuring Amplifier for sale (6,886)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Keyence XM-T2000 coordinate measuring system from 2021, in excellent and fully functional condition. Keyence XMM-1600 controller included. Additional accessories: Keyence case, dongle, user manual, and certificates. Measuring range: 300 mm × 250 mm × 150 mm Nsdpfx Agjx H T H Dsrswl Smallest display unit: Distance: 1 μm, Angle: 0.0001 degrees Measuring accuracy: Repeatability: ±3 μm, Measurement deviation: ±8 μm Maximum load capacity: 25 kg #8406

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0118507, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, workpiece weight (max.): 100 kg, total height: 2,185 mm, total width: 1,062 mm, total length: 1,354 mm, input voltage: 230 V, compressed air connection: 6 bar, Used coordinate measuring machine Measuring range (X/Y/Z): 500 x 400 x 400 mm Measuring software: DOS-Geopak Probe system: Renishaw PH6 + TP2 Control unit: Mitutoyo UC 100 Accuracy: 3.0 + (0.4 * L / 100) Delivery, calibration and training can be offered as options. Nsdpfx Aoywfrajgrswl An upgrade to MCOSMOS Geopak with Windows 11 is also available.

Condition: used, machine/vehicle number: FN572336, Year of construction: 2018, operating hours: 10,006 h, load capacity: 1,600 kg, lifting height: 3,700 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 3,700 mm MACHINE DETAILS Nsdpfx Agezz Hpferjwl Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 2,360 mm Self-weight: 3,300 kg Battery voltage: 48 V Battery capacity: 750 Ah Battery type: 6 PzS Battery voltage at rest: 51.6 V Service valid until: 09/2027 UVV (occupational safety) valid until: 09/2027 Operating hours: 10,006 h EQUIPMENT Clear-view mast without center hydraulic cylinder Load protection grid Full cabin with heater and windshield wiper LED work light, front LED work light, rear Comfort seat Side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 111

Condition: ready for operation (used), Year of construction: 2013, A 3D CNC coordinate measuring machine in need of repair is offered for sale. Max. measuring range X/Y/Z: 400mm/400mm/300mm, measuring principle: hybrid (optical/tactile), optical system: CCD camera with motorized zoom optics, focusing method: contrast autofocus, max. accuracy: 1.5µm (MPE), guideways: mechanical precision guideways, base structure: granite construction, control: CNC in all 3 axes, software: WinWerth®. The Z-axis no longer moves. An on-site inspection is possible. Nsdpfx Agjztrbdjrewl

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-S5-22-48417, input voltage: 230 V, overall weight: 51 kg, Dear Sir or Madam, We are selling: FARO Quantum S MAX 2.5 m, year of manufacture 2022, fully functional, current calibration available, including CAM2 Probing Edition with an unlimited CAM2 license and USB dongle, complete with all accessories. - Arm reach: 2.5 m - Number of axes: 7 Sale only to business customers; no warranty. Equipment: - Calibration kit - Transport case - Mounting plate - 3 mm and 6 mm iProbes - USB cable - Power cord 230 V - Rechargeable battery - Mount G3+, magnetic holder 150 mm - Measuring software CAM2 Probing Edition 1, unlimited license for CAM2 Njdpfx Aozxn E Nogrjwl - USB dongle, single-user license Please contact us if you have any questions.

Condition: excellent (used), For sale is a professional Vötsch VTL 7010 climate chamber, designed for conducting temperature tests and simulating environmental conditions. The device is used in laboratories, quality control departments, research and development centers, and for testing electronic, automotive, and mechanical components. The chamber is in good working order – the touchscreen starts up correctly and displays the main menu and the current operating temperature, as confirmed by the photos. Technical specifications: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 7010 Year of manufacture: 2010 Temperature range: -70°C to +180°C Heating/cooling rate: approx. 3.5 K/min Refrigerant: R404A – 0.8 kg R23 – 0.2 kg Power supply: 230 V AC, 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Operating pressure: 8 bar Control via a color touchscreen Working chamber made of stainless steel Door with a viewing window Adjustable internal shelves CE marking Applications The device is ideally suited for: temperature tests, material testing, testing electronics and components, durability tests, quality control, research and development work. Condition: used, functional, control panel operates correctly, internal chamber is clean and well-maintained, Nwodpfx Aezi T Nhogrel normal signs of wear and tear, sold exactly as shown in the pictures. Included: Vötsch VTL 7010 climate chamber, 2 perforated shelves, built-in control panel.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Nwjdpfoz Ebuzox Agrjl Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2008, WEINIG OptiControl 970090 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 Tool diameter max. 300 mm Tool length 0 - 240 mm Radial measuring range (radius) 150 mm Nedpfx Agozvpw Ierewl Non-contact measurement of tool dimensions, radius (R) and height (H), with display on electronic digital displays. Electronic digital displays providing information on tool radius and height. HSK63 tool holder for PowerLock tools. NEW: PowerLock adapter HSK63, shank D=50 x 260 mm.

Condition: like new (used), 3D Machines – Brown & Sharpe Standard Njdpfx Agjzndw Tjrewl

Condition: new, I am offering for sale an original, high-voltage traction inverter by Bosch, intended for Volkswagen AG, with part number 95C 907 123 EM27. This is a development component (ETK – Entwicklungs-Test-Komponente) used during research and development work on electric drive systems. The unit comes directly from a Bosch/VW development project and is housed in its original Bosch transport case with foam padding. The package also includes the original transport documentation and high-voltage test and inspection reports, confirming that quality control has been carried out. The inverter is responsible for converting direct current from the high-voltage battery into three-phase alternating current to power the electric motor. It is one of the key components of an electric vehicle’s drive system. Technical specifications: Manufacturer: Bosch Project customer: Volkswagen AG OEM number: 95C 907 123 Version: 95C 907 123 EM27 Bosch number: 0437.B00.0LV-01 Development version: C1-Muster 600A ETK Country of manufacture: Germany Included in the set: Bosch high-voltage inverter Original Bosch transport case Foam transport protection Bosch transport documentation Test and quality control reports Condition: 100% technically functional. Nwsdpfxszl H Hxo Agrel Very good visual condition. Complete with original documentation and transport case. Sold exactly as shown in the pictures.

Condition: good (used), functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,000 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta Euro C 121210 Year of manufacture: Manufacturer: Mitutoyo Measuring range: 1200 x 1200 x 1000 mm Accessories: Probe head mount: PH10T Nodpfx Aoyg Nkqsgrowl Probe head: Renishaw TP 200, SF module Additional accessories: Ceramic calibration sphere, original PC, SCR-200, temperature sensor As specialists, we are happy to provide tailored advice to help you find the right machine for your measurement tasks. Worldwide delivery available on request!

Condition: ready for operation (used), Year of construction: 2015, A mobile 3D measuring system from FARO is offered for sale. Measuring arm: FARO Edge, year of manufacture: 2015, revision: 3.9. Laser scanner: FARO LLP HD, year of manufacture: 2015, revision: 3.2. Single Point Articulation Specification: 0.0290mm, Effective Diameter Specification: 0.0145mm, Volumetric Specification: 0.0410mm. Measured maximum Single Point deviation: 0.0254mm, measured maximum Effective Diameter deviation: 0.0020mm, measured maximum Volumetric deviation: 0.0217mm. Calibration date of measuring arm: 17 April 2024. Calibration date of laser scanner: 12 April 2024. Includes FARO LLP HD Laser Line Probe, transport case, stand and accessories. Documentation available. An on-site inspection is possible. Nsdpsztduiofx Agrswl

Condition: excellent (used), For sale: Professional Fischer DUALSCOPE DMP40 coating thickness gauge designed for non-destructive measurement of metallic and non-metallic coatings on various substrates such as steel, iron, aluminum, and other non-ferrous metals. • Condition: Very good, fully functional and ready for operation • Current PCA calibration certificate dated 05.11.2023 • Complete set in original case including probe, cables, calibration foils, adapter, manual, and certificate Specifications and benefits • Automatic substrate recognition (FE/NFE) and selection of the appropriate measurement method • Wide measuring range and high measurement precision • Color display with intuitive navigation menu in Polish • Functions for statistics, results recording, and data export • Non-destructive measurement – ideal for production quality control and laboratory testing • Compliance with ISO, ASTM, and DIN standards • Robust industrial housing suitable for both field and laboratory use The set includes • Fischer DUALSCOPE DMP40 gauge • Measurement probe • Measurement cables • Calibration foils • Measurement adapter • Original transport case • Fischer lanyard • User manual and PCA certificate Applications • Coating quality control in electroplating, painting, and automotive industries • Industrial production and research laboratories • Service measurements and technical inspections Nwedpoxlu Tasfx Agrol

Condition: ready for operation (used), Zeiss MC 850 3D coordinate measuring machine Measuring range x: approx. 800-850mm Measuring range y: approx. 1200mm Measuring range z: approx. 600mm New software 2025 Accessories: Computer Changer Probe You are welcome to visit us for a viewing. We can also arrange cost-effective shipping for you! You will receive a proper invoice. Nsdpsznkulofx Agrewl For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, year of last overhaul: 2021, Equipment: CE marking, We offer this Mitutoyo QVT1-L2022IL-D coordinate measuring machine, like new, year of manufacture 2017. Code: 364-109Y Model: QVT1-L2022IL-D SO number: Serial number: 62736222 Year of manufacture: 2017 Nodpfx Agjyaymporswl If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control Nodpfx Aoygx Hnjgrswl - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 075514503516, A201015148, travel distance X-axis: 100 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 100 mm, Equipment: documentation/manual, Listed price is without VAT. 3D optical metrology microscope in an excellent condition. It has been used in scientific research. Complete industrial measurement system with 5x / 10x / 20x / 50x objectives. Key technical specifications - Motorized Z travel: 100 mm - Motorized XY travel: 100 × 100 mm, high precision - Motorized nosepiece: for 6 objectives - Integrated digitally controllable polarization option Nwsdpfx Agjzl Hglerjl Included equipment: - IF-RibSet hardware: - 64-bit high-speed control server - 24-inch monitor, joystick, mouse and keyboard - software modules: - IF-LaboratoryMeasurementModule for 3D data acquisition - IF-MeasureSuite graphical user interface and measurement database - measurement modules for: - profile form measurement - profile roughness measurement - surface texture measurement - volume measurement - 2D image measurement - automation - Alicona Inspect module for geometric difference and tolerance measurement - Edge Measurement Package — includes cutting edge radius, form, chipping, chamfer, contour and multi-edge measurement - IF-Real3DRotationUnit G2 — motorized rotation unit with manual tilt axis and three-jaw collet system - RinglightHP — digitally controlable white LED ring light, 24 segments, 56 LEDs - objectives included: - 5x, working distance 23.5 mm - 10x, working distance 17.5 mm - 20x, working distance 19.0 mm - 50x, working distance 11 mm. Designed for 3D surface measurement, roughness measurement, tool edge inspection, micro-geometry measurement, wear analysis and precision quality control. The system is suitable for metrology laboratories, tool manufacturers, aerospace, automotive, medical device production, R&D centres and universities. Inspection and test before purchase are possible.

Condition: used, machine/vehicle number: W41190V00204, Year of construction: 2019, operating hours: 2,919 h, load capacity: 5,000 kg, overall weight: 1,000 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated pulling force: 5,000 kg MACHINE DETAILS Battery voltage: 24 V Battery capacity: 500 Ah Battery year of manufacture: 2019 Battery voltage in idle state: 25.0 V Dimensions & Weight Dimensions (L x W x H): 1,700 x 800 x 1,400 mm Dead weight: 1,000 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 2,919 h EQUIPMENT Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Nwodpfx Aozz Hxaegrsl Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 372

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200412480282, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, table width: 1,000 mm, table length: 1,600 mm, year of last overhaul: 2025, Equipment: type plate available, Coordinate measuring machine Zeiss SPECTRUM 10/16/6, year of manufacture 2004, calibrated until 2025, less than 1,000 operating hours since control replacement in 2018. Condition: good, relatively little use, minor transport damage to the granite table (not functionally relevant). Year of manufacture: 2004 (date of manufacture 12/2004) Location: West Saxony Price: on request Technical data: Manufacturer: Carl Zeiss IMT GmbH / Carl Zeiss Inc. IMT Corporation Model: SPECTRUM 10/16/6, U-STONE (granite measuring table) Part No.: 623266.9803.013 Serial No.: 200412480282 Measuring range: X 1,000 mm × Y 1,600 mm × Z 600 mm Measuring software: Zeiss Calypso, Version 6.2.12 Control: replaced in 2018 Probe head: swiveling probe system with extensions/probe holders (see photos) Design: gantry measuring machine, CNC drives Condition/Use: Operating hours since control replacement in 2018: less than 1,000 hours – very little use. Calibration performed in 2025. The granite measuring table has minor, purely optical transport damage (see photos), which is not functionally relevant. Description: Nedpfx Agozxgmxorowl For sale is a Zeiss SPECTRUM 10/16/6 coordinate measuring machine with a granite measuring table (U-STONE), year of manufacture 2004. The gantry measuring machine has a measuring range of 1,000 × 1,600 × 600 mm, a swiveling probe system with extensions, and is operated with the Zeiss Calypso measuring software (Version 6.2.12). The control system was completely replaced in 2018 – since then, less than 1,000 operating hours have been logged. The machine is in good technical condition and was calibrated in 2025. The granite table has minor, purely cosmetic transport damage that does not affect its function. Inspection and functional testing at the location in West Saxony are possible by appointment. Price: please request a quote.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand KEYENCE VL 350 3D measuring system. Item for sale: 1 x KEYENCE VL 350 We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly. Nwodpfszxqxfex Agrol

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: type plate available, Nikon MCAx30+ 7-Axis Measuring Arm with H120 Laser Scanner – Complete System Nikon Metrology MCAx30+ | 7-Axis | 3.0 m | H120 Scanner | Year of Manufacture 2017 For sale is a Nikon MCAx30+ 7-axis measuring arm with an H120 laser scanner, manufactured in 2017. The system is in very good technical and optical condition and has been regularly maintained. The laser scanner has a current calibration. Ideally suited for 3D measurement technology, quality control, reverse engineering, component measurement, CAD comparison, prototyping, and mobile 3D data acquisition. Equipment Nikon MCAx30+ 7-axis measuring arm Measuring range approx. 3.0 m Nikon H120 laser scanner FOCUS software Current calibration of the H120 scanner Transport case for the measuring arm Separate transport case for the scanner Probe 3 mm Probe 6 mm Reference probe Calibration sphere Calibration rod Calibration plate for the laser scanner Complete, immediately ready-to-use system Condition The measuring arm and the H120 scanner are in very good condition. Njdpfszxz Ikex Agrowl The system has been carefully handled and, due to the current calibrations, can be used directly for professional measurement tasks. The MCAx30+ offers high flexibility in mobile 3D measurement technology due to its 7-axis kinematics and 3-meter measuring range. In combination with the H120 laser scanner, the system is suitable for both classical tactile measurement and the rapid, non-contact acquisition of larger components. Thanks to the extensive accessories and the two transport cases, the system is offered as a complete measurement package. Inspection and functional testing are possible after prior arrangement. The sale is preferably as a complete system. If you have any questions about the equipment, software or technical condition, please do not hesitate to contact me.

Condition: like new (used), operating hours: 250 h, SHI Machines Type: BlueBox Virtually unused with only 250 operating hours! Technical specifications: Power: 120 kW Torque: up to 470 Nm Speed: up to 6,000 rpm Operation: Four-quadrant operation Safety package: Bulletproof cover & data filter for "Go" signal line Dimensions: approx. 2800 × 1600 × 1300 mm Accessories, etc.: 1 clutch 120 - steel, incl. adapter Clutch size: 100 Max. speed: 7,300 RPM Nodoy Tg R Njpfx Agrjwl Max. torque: 1,000 Nm 1x adapter 1x clutch steel size 100 1x adapter 2 ø40 1x adapter 2 ø50 1x adapter 2 ø60 1x clamping device ø40 1x clamping device ø50 1x clamping device ø60 Adapter mounting tool Clutch 120 - CFRP, incl. adapter Max. speed: 8,500 RPM Max. torque: 720 Nm Adapter mounting tool CISPR 25 test bench made of wood on wheels for EMC BlueBox 120, size 2500 x 1000 x 900 mm Load capacity up to max. 500 kg, incl. 2 mm hot-dip galvanized ground plane Payload: up to 1,400 kg Weight: approx. 2,500 kg Operating voltage 400 V, 250 A Control voltage 24 V Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information provided are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2014, We are offering a high-quality 3D scanner from GOM: Nwsdpfx Agjzpwg Rsrel GOM ATOS IIe Rev.01 Completely ready for connection, including all cables Note: The PC is password-protected, but the software is included on CD Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x... Set 1000x800 Complete GOM PC system in an aluminum case (running Linux), fully configured for the GOM ATOS IIe Software on CD; steel scale bars with ATOS evaluation dongle Replacement lamp Calibration panel (aluminum) CP20/MV 350x280 mm² Please feel free to contact us if you have any questions!

Condition: ready for operation (used), Year of construction: 2008, A CNC-controlled 3D multisensor coordinate measuring machine by Dr. Schneider is available. Design: bridge type, measuring dimensions X/Y/Z: 400mm/400mm/300mm, axis resolution: 0.0001mm, max. traverse speed: 100mm/s, max. acceleration: 4m/s², optical length measurement error: 2+L/300µm, volumetric length measurement error: 2.8+L/300µm, probe head: Renishaw PH10M, touch probe: Renishaw TP200, probe interface: Renishaw PI200. Machine dimensions X/Y/Z: approx. 1200mm/1200mm/2100mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Nwodpezli Tujfx Agrjl

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Nwodpfxszma Ske Agrel