Used Micro Doser for sale (831)

Condition: good (used), Year of construction: 2007, CNC lathe MICROTURN CHALLENGER BNC 1840, year 2007. Control: FARGO 8055i/A, tool turret VDI 40 / 8 positions, chuck diameter 250 mm. Spindle mount: CAMLOCK D1-6. Center height: 230 mm. Turning length: 1000 mm. Spindle bore: 65 mm. Spindle speeds: 100–4500 rpm. Further data available in the data sheets. Coolant system installed. The machine is in good condition and can be demonstrated under power. Machine documentation available. Accessories: tool holders, jaws for the chuck. Fpodpfx Ajyhzg Dod Nsg

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Fjdpjwmqwysfx Ad Nspg

Year of construction: 2020, condition: ready for operation (used), Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available. Fpedpfxoucw Tvs Ad Nsg

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible. Fpedpfx Asxq Exdod Nog

Year of construction: 2023, condition: ready for operation (used), A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025. Fpjdpfxewn H Ude Ad Nog

Condition: ready for operation (used), A cycle-controlled CNC lathe Microcut of the BNC series is available. Turning length: 2000mm, chuck diameter: 400mm, turning diameter over bed/cross slide: 610mm/330mm, spindle speed: 2500rpm, tool positions: 8. Machine dimensions X/Y/Z: approx. 4000mm/2300mm/1800mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible. Fodpfx Ajxr Nvisd Nepg

Year of construction: 2007, condition: ready for operation (used), Filtration surface: 224m², documentation available. Fpodpfx Adjgi Nw So Njg

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Fpodpsxmurrsfx Ad Neg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 16,000 h, functionality: fully functional, turning length: 80 mm, spindle speed (max.): 7,000 rpm, bar diameter (max.): 32 mm, controller model: Fanuc Serie 32i-B, TECHNICAL DETAILS Maximum bar diameter: 32 mm Maximum turning length: 80 mm Main spindle speed: 7,000 rpm Fodpfjyh Azpox Ad Nepg C-axis (main spindle): 0.001° Maximum counter spindle diameter: 32 mm Counter spindle speed: 7,000 rpm Tool capacity: 23 tools MACHINE DETAILS Control system: Fanuc Series 32i-B Number of axes: 7 Operating hours: 16,000 h EQUIPMENT Coolant pump with increased delivery capacity Parts conveyor belt Mayfran chip conveyor Service kit with emulsion package Bar feeder FMB Turbo 3-36/3200 / A Emulsion coolant unit Accessories for short lathe subframe Note: The seller can offer disassembly and loading for €2,000.

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Fpodpjxl Rf Sjfx Ad Nog

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Fpjdpfx Asxl Rgisd Njg

Condition: good (used), Year of construction: 2000, Lot of boring tools for boring mills Manufactured by Gildemeister-Microbore - Komet Spindle mount ISO-BT 50 MK 5 In good condition. Fodpfjwd Tkksx Ad Nopg

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 with Fanuc OT control . Bar capacity max: 16 mm. Further data see data sheets Fodpfxjvbb U Hj Ad Nepg Machine documentation available .

Condition: used, Year of construction: 2002, functionality: fully functional, total height: 850 mm, total width: 1,000 mm, total length: 1,000 mm, overall weight: 1,000 kg, plate height: 160 mm, Granite Plate - Dimensions 1000x1000x160mm Fpsdpfovki S Esx Ad Nsg - Quality appx. Class 1 or 0 (will be checked) - incl. steel frame and cabinet - on demand including roof construction

Condition: used, Year of construction: 2003, travel -x axis 180 mm travel -z axis 370 mm Total weight, approx. 65 kg Fjdpfxeydqnfs Ad Nepg dimensions of the machine ca. 2,0 x 1,2 x 2,0 m Tool Presetter DMG Microset - ECO 1

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit Fjdpfx Adou Idfre Njpg -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Year of construction: 2007, turning length 1500 mm control FAGOR 8055i/A TC Fodpfx Adov Hhv Ue Nopg centre height 230 mm greates pass round over bed 475 mm swing diameter over slide rest 240 mm bed width 355 mm max. workpiece weight 1500 kg spindle bore 65 mm spindle turning speed range 100-4500 U/min weight of the machine ca. 3,15 t required space 3,51 x 1,80 x 2,02 m

Condition: used, This listing is for a Microm EC 350-2 Cryoconsole. The unit is in full working condition and is ready for immediate release. The Microm EC 350-2 cryoconsole is an essential tool for laboratories focused on histology and sample preparation, particularly when working with paraffin-embedded samples. Its advanced design and functionality ensure reliable performance for optimal results. Fpsdpfjxxyf Usx Ad Nsg Key Features: Large Cooling Plate: The EC 350-2 is equipped with a spacious cooling plate specifically designed for the solidification and maintenance of samples in paraffin. This feature ensures that samples are uniformly cooled, which is critical for preserving sample integrity. Adjustable Temperature Range: Users can easily set the temperature between 0 and -15ºC, allowing for precise control based on specific sample requirements. This flexibility is crucial for various protocols that may necessitate different cooling conditions. Microprocessor Control: The operations of the cryoconsole are managed through a microprocessor integrated into the paraffin dispenser, ensuring accurate temperature management. This technology helps maintain consistent conditions, minimizing the risk of temperature fluctuations that could affect sample quality. Independent Operation: The EC 350-2 can operate efficiently at its maximum performance of -15ºC without requiring any adjustments. This feature makes it a dependable choice for laboratories that demand stability and reliability in their sample processing. Applications: The Microm EC 350-2 is ideal for: Histology Laboratories: Perfect for preparing tissue samples for sectioning, ensuring that paraffin solidifies correctly for optimal slicing. Research Settings: Supports various experimental protocols requiring precise temperature control during sample preparation.

Condition: used, Year of construction: 2005, Weight 350 kg Dimensions (L/W/H) 1930,0 × 1850,0 × 2490,0 mm x-axis 610 mm y-travel 305 mm z-travel 520 mm table length 760 mm Fjdpfx Aowg Huujd Njpg table width 360 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser hours: 6,900 h, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, power: 10 kW (13.60 HP), year of last overhaul: 2024, working range: 4,020 mm, Equipment: cooling unit, documentation/manual, safety light barrier, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • Powerful Donaldson DFPRO 6 filter system with 7.5 kW Technical specifications: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Transverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Fjdpfovw Tdlex Ad Njpg Z-axis travel range: 150 mm Acceleration Z-axis: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% EX-TRABEAM® Pro laser cutting head Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical specifications: Drilling from/to: Ø 4 mm - Ø 30 mm Threading from/to: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic drilling tool measurement Pneumatic hold-down device Brush For removing drilling chips Donaldson® DFPRO 6 Cyclopeel filter system Fan power: 7.5 kW Flow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With witt Gas Mixer Machine has always been operated under a maintenance and support contract

Condition: new, Year of construction: 2026, 0760 mm 450 mm 500 mm 900x450 mm BBT 40 10.000 U/min Motor Capacity 7,5/11 kW Fedpfx Adex Urt Se Njpg max. table load 850 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, Controller Fanuc 18i-T NC controlled axes 6 Original Japan With barfeeder FMB mini turbo 2-16 / 3200 A For 3 m bars Max. turning dia 16 mm Max. drilling capacity 7 mm Max. tapping capacity M6 Rapid feed in X/Y/Z/ZB = 20/20/20 m/min Rapid feed in A = 78,5 m/min Feedrate in X/Y/Z/ZB = 10/10/10 m/min Feedrate A = 10 m/min Main spindle speed 500 - 12000 rpm Main spindle power 100/40% ED/Power 2,2 kW Outer tool places 6 Driven tool places 3 Rear side operation Max. turning dia D16 mm Max. part length 85 mm Sub spindle speed 500 - 8000 rpm Sub spindle power 0,55 kW Max. drilling capacity 4 mm Max. tapping capacity M3 Weight 1700 kgs Dimensions LxWxH = 2163 x 770 x 1650 mm Features, accessories - FMB Mini Turbo barfeeder 3 meter - C axis on both spindles - Low volt lamp - Hydraulic unit - Coolant unit (run with oil) - Central lubrication - Door interlock - Ready part conveyor Fpodpfjxvbbfex Ad Nsg The lathe was removed from production recently. Good condition.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Fpodpfx Aoycp Nlsd Nsg Note: Dismantling and loading can be carried out by the seller for €1,500.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 47,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 MAIN SPINDLE Max. bar diameter: 12 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 SUB SPINDLE Max. bar diameter: 10 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Operating hours: 47,000 EQUIPMENT FMB Minimag bar feeder Fsdpfx Adjycp Iho Nspg Note: Dismantling and loading can be handled by the seller for €1,500.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter Fpedjb E S I Tspfx Ad Neg -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Dimensions: 200/200/H330 mm -Weight: 19 kg