Used Mobile Pre-Shredder for sale (18,699)

Year of construction: 1972, condition: ready for operation (used), Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible. Bdedpfxouzx T Re Afwog

Condition: new, The cost-effective single-shaft shredders of the ZWS series enable the realization of a wide range of size reduction tasks, such as a preliminary stage for subsequent briquetting, the production of wood chips for combustion, or re-introduction into the particleboard industry. Depending on throughput and material, the machines can be customized to meet specific requirements. Typical material for shredding includes: - Large panel and board offcuts - Wooden pallets Bodoyr I Ilopfx Afwjdg - Waste from joinery workshops - Packaging wood - Construction and demolition timber - Veneers, MDF, and particleboard

Condition: used, machine/vehicle number: 14130, Rotor diameter: approx. 280 mm Rotor width: 500 mm Number of rotor blades: 16 Inlet cross-section: approx. 480 x 500 mm Bdodezrqpwjpfx Afwjg Drive motor: 15 kW

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Bodpeyr Tlpsfx Afwsdg Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Rotor knives: 76 / 114 Bdsdpeyr Tx Aefx Afweg Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: used, machine/vehicle number: 13063, Rotor diameter: 350 mm Rotor width: 1200 mm Rotor blade: 66 Bodpfx Asyr Tttefwsdg Stator knives: 1 row Inlet cross-section approx. 1100 x 1200 Drive motor: 55 kW

Year of construction: 2011, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 8000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 2000 x 2000 mm TRANSVERSAL TRAVEL OF THE TABLE: 1500 mm MAX ADMITTED LOAD: 15000 Kg HEAD: A/B AXIS AUTOMATIC ; CONTINUOUS ; ISO 50 ; 7000 rpm; 49 kW; 1180 Nm Bsdswl R Agjpfx Afwodg TOOL MAGAZINE: CHAIN-TYPE ; 80 POS CONTROL UNIT: HEIDENHAIN iTNC 530 ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER NOTE: WITH ROTARY TABLE 1500X1500 mm; MAX ADMITTED LOAD 15000 Kg

Year of construction: 2004, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1250 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 20 m/min TRANSVERSAL TRAVEL OF THE TABLE: 2000 mm PALLET: 2000 x 2500 mm; 1200 rpm MAX ADMITTED LOAD: 28000 Kg Bdjdpjwlwhcefx Afwsg HEAD: A/B AXIS AUTOMATIC ; ISO50 DIN ; 15-4000 rpm; 30 kW; 650 Nm TOOL MAGAZINE: CHAIN-TYPE ; 41 POS CONTROL UNIT: FIDIA C20 XPOWER HIGH PRESSURE COOLANT: 12 Bar ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Bjdpfx Aod Dy Ugefwsdg Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: used, Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm Bdsdob Hiyljpfx Afweg -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg

Year of construction: 2012, condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Manufacturer: Kemper, mobile welding fume extractor type 82150 -Drive: 1.5 kW -Volume flow: 1000 m3 / h Bjdpfx Ashmqm Iofwjdg -Extraction arm: O 160 mm x 4200 mm -Transport dimensions: 655/910/H1470 mm -Weight: 194 kg

Year of construction: 2023, condition: new, SEMIX M160S4 provides the highest capacity amongst mobile concrete batching plant in the world. SEMIX Mobile 160S4 equipped with 6000/4000 capacity twin shaft concrete mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. Bdodpfx Afsgazctowog All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Condition: like new (used), “Herbold 600/1000 – Granulator / Shredder” for Sale Also many other manufacturers like: Pallmann / Lindner. Find our complete stock on our website. Bdjdpfjggfkbex Afwsg Manufacturer: Herbold Type: 600/1000 Electrical Motor: 55 kW Included

Condition: like new (used), “Pallmann PS 4-7,5 F – Granulator / Roll Crusher” for Sale Find our complete stock on our website. Bdodsglvv Uopfx Afwog Manufacturer: Pallmann Type: PS 4 – 7,5 F Mach. No.: 2264036 Electrical Motor: 75 kW Included Included frame. Shredder will be overhauled, sandblasted and painted.

Condition: good (used), Year of construction: 1993, Offer 24299 Technical data: - Volume flow approx. 2170 m³/h. - Dust bag / chip bag up to 170 L - Connection spigot 160 mm - Connection spigot adapter 2 x 100 mm - Drive power 400 V / 2.2 kW - Space requirement W 1200 x H 1900 x D 550 mm Bdedpfx Ajt Hurxefwjg - Weight approx. 85 kg

Condition: new, Equipment: lighting, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Overview of the design and functions Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions Bjdpfx Afsun Shgjwedg The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Condition: good (used), CRUSHER / GRINDER / SHREDDER / MILL for polystyrene (EPS) waste. Power: 15kW The unit comes with an automatic control cabinet. It is prepared (has outputs) for a mill, a fan, and a conveyor belt. It has both manual and automatic functions. In automatic mode, it regulates the material feed by itself. The machine has been designed to prevent motor overload (“clogging” or “stalling”): Load monitoring: The system continuously measures the mill’s current draw (amperage). Automatic stop: When too much material is fed and the current rises above the set limit, the conveyor belt feeder stops automatically. Automatic restart: Once the mill processes the accumulated material and the load decreases, the system automatically restarts the feeder to supply the next batch of material. Tag: EPS, crusher, grinder, foam shredder, mill, polystyrene recycling machine, foam crusher, compactor, foam densifier, volume reducer. Bdedpfxjumk Nmo Afwog

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Welding fume extractor, dust extraction unit, self-cleaning, pneumatic, vacuum type by KEMPER. Suitable for welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with contamination-free dust collection. The mobile KEMPER MaxiFil Clean cartridge filter is designed for continuous operation, suitable for high-concentration welding fumes and dust filtration. Appropriate for all welding methods with carbon steel, low-alloy and high-alloy steel, as well as aluminium. Bdodjtq E Siopfx Afwsg Cost-effective operation thanks to the long service life of the filter cartridge. Due to IFA-W3 certification, the basic version of the filter can be used for welding high-alloy steels. Specifications: Airflow capacity: 1,100 m³/h Maximum negative pressure: 3,200 Pa Three-phase fan motor: 1.5 kW Filter surface area: 15 m² Year of manufacture: 12/2023 Cartridge filter element with PTFE membrane Filtration efficiency: > 99.97% Built-in delay time controller for start-stop operation. With the optional start-stop sensor connected, the extraction delay after welding can be set between 5 to 60 seconds. Stock no.: 1071

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, power: 4 kW (5.44 HP), fuel type: electric, machine/vehicle number: 10038627 / 316200002G, Voran Muser steel version Bjdpjtr Dx Sofx Afwedg New machine - Slight paint damage Subject to prior sale!

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 24-month warranty Stainless steel model Advantages: + Very good value for money + Machine is completely made of stainless steel (including the collection tray) + Chocolate shavings are of uniform thickness (0.1 - 3 mm) + Quickly shaves 2 blocks of chocolate (up to 2.5 kg each) + Very easy to operate + Hygienic, easy to clean and keep clean + The drive blade can be replaced separately + With speed control + The unit stands stably on 4 adjustable feet Professional tip from our master baker and pastry chef: To obtain particularly beautiful, uniform shavings, the chocolate should be tempered beforehand: approx. 25 - 26°C: for dark chocolate approx. 23°C: for milk / white chocolate Technical data: - Suitable for 2 blocks of chocolate (up to 2.5 kg each) - Dimensions for chocolate blocks (min - max): --- Width: 17 - 40 mm --- Depth: 145 - 210 mm --- Height: 40 - 330 mm Bdsdpjivdxxjfx Afwsg - Unit dimensions: 393 x 370 x 638 mm (W x D x H) - Motor power: 90 W - Connection values: 230V - 1 phase - 50Hz - Net weight: 30 kg

Condition: used, Year of construction: 1990, machine/vehicle number: 35381, Schwertfalzwerk - Mobile Folding Knife Stahl VFZ 52Year 1990 - Serial-No. 35381-145531 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bodpfsh R D Sbex Afwsdg Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 1993, machine/vehicle number: 399/093, Offer 24464 Technical data: - with ECKOLD pressure joining pliers, type MZ - Working pressure infinitely variable max. up to 500 bar - Joining gun pressure force 25 Kn - Single cycle or continuous cycle - Infinitely variable number of cycles - Hose package power unit - tongs approx. 4 m - Hydraulic oil capacity 15 ltr Bedpfx Afouzwc Dswedg - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Single-Shaft Shredder WT40100 – 45 kW – Hydraulic Pusher – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling lines. We offer a new industrial single-shaft shredder 3E Machinery WT40100, equipped with a 45 kW main motor and a hydraulic pusher system. The WT series is designed for the pre-shredding of large and bulky materials that cannot be fed directly into granulators due to their size and structure. The hydraulic pusher automatically pushes the material towards the rotor, ensuring efficient and stable shredding. TECHNICAL SPECIFICATIONS: Model: WT40100 Type: Single-shaft shredder with hydraulic pusher Main motor power: 45 kW Hydraulic motor power: 2.2 kW Rotor length: 1,000 mm Rotor diameter: 390 mm Rotor speed: 74 rpm Rotor knives: 58 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,410 × 1,000 mm Machine dimensions (L × W × H): 2,825 × 2,004 × 1,875 mm Discharge height: 500 mm Weight: approx. 4,000 kg Control system: Siemens components / Siemens LOGO PLC Condition: Brand new Technical parameters according to the WT series specification published by GrabTrade. APPLICATIONS: The WT40100 is suitable for shredding a wide range of materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, PVC, plastic pipes and profiles, film waste, crates, boxes, and containers, wood and pallets, paper and cardboard, textile waste, carpets and Big-Bags, cable waste, industrial and bulky waste. Bedpfx Asq Sp H Nsfwjdg The hydraulic pusher system continuously pushes the material towards the cutting rotor, providing effective processing even with bulky or irregularly shaped waste. The shredder is equipped with a robust low-speed rotor, an external bearing system, and overload protection. The machine can also be integrated with a granulator, conveyor, screw conveyor, or other equipment to create a complete shredding and recycling line. 3E Machinery specifically showcases the WT40100 operating together with a PC4280 granulator as a complete shredding system. Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and complete recycling lines: GrabTrade – shredding and recycling machines.

Condition: ready for operation (used), Year of construction: 2007, power: 55 kW (74.78 HP), Fully functional single-shaft wood shredder - currently in operation in our factory. Including electrical control system (PLC), switch cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Bdsdjra Ex Ejpfx Afweg Technical data Rotor working length: 1,500 mm Rotor diameter: 485 mm Motor: 55 KW Rotor speed: 100 RPM Rotor knives: 76 pieces concave / 35x35 mm 4-fold rotating cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg Further details on request. Errors and omissions excepted.

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs, on a solid mobile base -Clamping table: 1500 x 500 x 150 mm Bdjdpfx Afjqzl E Nowjg -Table height: 1010 mm -Sheet thickness: 30 mm -Plate: with supporting ribs -Overall dimensions: 1530/710/H1010 mm -Weight: 320 kg