Used Modul / Serwema Zfwz 10 / Sw Wf 1000 for sale (38,901)

Condition: used, all stainless steel suitable for thermal oil heating Dodsz Harzjpfx Adrecn heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,25 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Dodeuayyyjpfx Adrecn Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm Dcjdpfx Adouayy Heron diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 1,5 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 3GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Dcodpfxsuayy To Adrjn

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, operating pressure: 210 bar, empty load weight: 149 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, NILFISK MH 4M -210/1000 PAX HOT WATER WASHER NEW COIL Manufactured in 2017 The machine features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 210 bar and up to 940 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each unit we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Flow rate [l/h]: 940 Working pressure [bar]: 210 Max. Heating temperature [°C]: 85-150 Connection power [kW]: 8 Detergent tank [l]: 10+10 Hose length [m]: 10 Weight [kg]: 149 EQUIPMENT: NEW COIL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Dcedpfx Aox Ewupedrsn

Condition: excellent (used), Allen Bradley Panel View Plus 1000 CAT SER 2711P-RDT. 10 C Dedsx Td U Espfx Adrjcn

Condition: excellent (used), The SW 41 Ti is a swinging bucket rotor designed to centrifuge up to six tubes. Used in Beckman Coulter class H, R, and S preparative ultracentrifuges, the rotor develops centrifugal forces for the separation and purification of small particles. Typical applications include separation of RNA, proteins, and subcellular particles in solution using rate zonal centrifugation. Approximate Dcodsxqq Ikopfx Adrsn sample volume per tube is 0.5 mL, with a gradient volume of about 12.5 mL. Condition and belongings are on the picture. Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2000, honing diameter 45 mm stroke 1000 mm 4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Accessories: Honing tools for diameter: -10mm -12,3mm -13,3mm -21,1mm Dcjdpfx Adsxddq Ejrjn

Condition: used, This listing is for 1 of 18 Qiagen BGR-Z-Modul Dt-1100uL Bez Handler with grippers. Each boxed in original packaging These units is in full working condition and ready for immediate use The Qiagen BGR-Z-modul Dt-1100uL Bez Handler with Grippers (Part No. 9015210) is a component designed for use with Qiagen's automated liquid handling systems, such as the BioRobot 8000. This module facilitates precise and efficient handling of 1,100 µL volumes, equipped with grippers to manage sample tubes or plates, enhancing the automation of laboratory workflows. Key Features: Volume Capacity: Designed to handle 1,100 µL volumes, suitable for various liquid handling tasks. Gripper Mechanism: Equipped with grippers to securely handle sample tubes or plates, ensuring accurate placement and retrieval. Dsdpexv Dnhofx Adrocn Compatibility: Specifically designed for integration with Qiagen's automated systems, ensuring seamless operation and reliability.

Condition: excellent (used), Year of construction: 2009, overall weight: 238,000 kg, total width: 14,000 mm, total length: 12,000 mm, total height: 9,000 mm, Flanging and dishing machine HAEUSLER - HKP 9000/1000 MACH-ID 9829 Make: HAEUSLER Type: HKP 9000/1000 YOP: 2009 HAEUSLER Dishing press: Max. force 1000 Ton Retraction force 82.5 Ton Approach speed 260 mm/Sec Working 10 - 30 mm/Sec Return speed 370 mm/Sec Pressure 253 Bar Distance between column 9000 mm Dimensions table plate 1500 x 1500 mm Max Work piece diameter 8700 mm Thickness at yield 450 N/mm2 90 mm Manipulator: Max. dimanions 8700 x 90 mm Min. dimensions table 1500 x 1500 = 3200 mm Min. dimensions table 700 x 700 = 2200 mm Dcsdsz Ix Nhspfx Adrsn Work piece weight 42.000 Kg Travelling speed 158 M/Sec Power 165 kW Weight 43000 Kg Max. workpiece: 8700Ø Maximum sheet thickness:90mm Power: 190kW Length: 12000mm Width: 14000mm Height: 9000mm Weight: 238000kg Once-in-a-lifetime opportunity – HAEUSLER heavy dished head production line For companies planning to expand into nuclear, SMR, petrochemical, hydrogen, ammonia, offshore or heavy pressure-vessel production, acquiring an existing installation of this scale could potentially save years of development, procurement, engineering and manufacturing lead time compared with establishing a completely new heavy-forming facility. Machines like these are built for decades of industrial service and very rarely reach the international used-equipment market as a complete available production package. For a manufacturer looking to enter or expand in the market for extra-large pressure vessels and dished heads, this may genuinely be one of those opportunities that does not come around twice. HAEUSLER HKP 9000/1000 + HBM-HY 7000 x 90 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), with internal grinding attachment Center height 125 mm Dcjdpfxoy H Dq Hs Adren Distance between centers 1000 mm Table size 1650 x 145 mm Grinding wheel 400 x 50 x 127 mm Grinding wheel speeds 1'500 - 2'200 rpm Grinding head turnable 270° Grinding wheel 225 x 20 x 76.2 mm Misc. accessories MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 1985, Cutting length 1030 mm Max. sheet thickness 2 mm Stroke rate approx. 67 / min Rear stop 500 mm Table width 230 mm Working height 905 mm, can be lowered to 755 mm Dcjdpofpa Ihjfx Adron Motor power 3 kW Dimensions, machine L x W x H 1550 x 1300 (without support arms) x 1250 mm Weight 850 kg Accessories / Special features: • Rear, manually adjustable rack and pinion stop with measuring tape, length 500 mm • Safety cable at the front, electrically secured • 1 side stop on the right • 1 support arm • Gear brake motor • The current working height is 905 mm. This can be lowered by 150 mm to 755 mm, as the machine has been raised on its machine feet. • Manual central oil lubrication • Electric foot switch We have resharpened and readjusted both blades. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Multiple knife mill / granulator with rotor with 16 knives 6 stator knives Drive 90 kW With equipment Dcjdpfsz Hxdvsx Adren

Condition: used, grinding diameter 250 mm grinding length 1000 mm centre height 125 mm grinding wheel diameter 500 mm Dodpfx Ajd Ih Egodrjcn grinding wheel width 80 (100) mm bore 203,2 mm MK5 work piece spindle speed 20-400 U/min workpiece spindle swivable +/- 360 ° grinding head swivellable +/- 0 ° 0-9,99 mm/Ø 0-9,99 mm/Ø table swivelabel +/- 10 ° table speeds 0,02-6 m/min 130 kg max. workpiece weight -without tailstock 130 inkl. Spannung kg cross travel 270 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 5,5-7,5 kW weight of the machine ca. 2,7 t delivery: completely overhauled including a new control Examples: Accessoies: - Marposs auto-sizing-attachement - Balancing for the wheel. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, all stainless steel belt width 1.000 mm Dodpfxoz Apide Adrscn adjustable speed 0,75 kW dimensions (l x w x h) : ± 1.750 x 1.300 x 1.350 mm

Condition: used, Year of construction: 2025, Technical details: content: 1000 cbm Dedpey I Rr Tjfx Adrjcn capacity in bar: 11 total power requirement: - kW tank capacity: 1000 l operating pressure: 11 bar dimensions of the machine approx. HxWxD: 2,32 x 0,8 x 0,8 m weight: 260 kg • Function: Serves as a buffer and storage medium in compressed air stations, separates condensate, and reduces the frequency of compressor cycling. • Quality standards: Manufactured in accordance with the European Pressure Equipment Directive (2014/68/EU) or 2014/29/EU (simple pressure vessels) as well as the AD 2000 guidelines. • Surface protection: Typically hot-dip galvanized inside and out in accordance with DIN EN ISO 1461 for maximum corrosion protection and durability. • Operating data: Designed for temperatures typically ranging from -10 °C to +50 °C (in some cases up to +80 °C) and a standard operating pressure of 11 bar with a test pressure of 16 bar. • Design: Vertical design with welded longitudinal and circumferential seams. *

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K Djdpew E Nkiefx Adrscn -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Dcodpfx Asyatx Sedren Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Location: from stock 54634 Bitburg - available immediately - Dedpfx Adjwqx Axsrocn

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Eddy current non-ferrous metal separator type EIS 1000 S, supplied by Panizzolo (Italy), with Panizzolo vibrating feeder. For separating aluminium, copper and other non-ferrous metals from plastics, rubber, wood and inert materials. Technical data: – Type: EIS 1000 S – Belt width: 1,000 mm – Panizzolo vibrating feeder with OLI 1.1 kW vibration motor – Power supply: 3 × 400 V / 50 Hz Electrics: – Separate control cabinet with Schneider ClimaSys cooling unit – 2× Schneider Altivar Process frequency inverters (variable speed) – Control panel with touch display, main switch, emergency stop Scope of delivery: separator, Panizzolo vibrating feeder (OLI 1.1 kW vibration motor), control cabinet. By arrangement, an older non-working separator from the same supplier can be included as a source of spare parts. Djdpfx Asz I Itcsdrjcn Condition: in working order, separator and feeder tested running. Inspection and test run by appointment on site. Loading onto truck on site. Sold as is, price net plus VAT.

Condition: used, Year of construction: 2004, operating hours: 3,142 h, total width: 2,400 mm, total height: 2,100 mm, Colour: Grey Empty weight: 5.000 kg Dimensions (LxBxH): 550 x 240 x 210 cm Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 102848 - Operating hours: 3142 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 22 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 30 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Bottom - - Motor power [kW]: 15 - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 3 - Max. planing height [mm]: 160 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Automatic - Diameter extraction nozzle [mm]: 160 - Options: Powered rollers in table, Powerlock - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 33 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 278 - Fuse [A]: 400 - Power [kW]: 128.0 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dcsdpfezvcqzsx Adrsn Yorick Diebels

Condition: good (used), 1) Used carbide circular saw blade for sawing aluminum Article: 100040180 TFZ neg (GEBR-B1) Application: Long cut circular saw Note: little used, top condition Technical description: ● Diameter 1000 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 6 mm ● Thickness of carbide tooth approx. 3 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 2) Used carbide circular saw blade for sawing aluminum Article: 100040180 TFZ neg (GEBR-B2) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 1000 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 6 mm ● Thickness of carbide tooth approx. 3 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 3) Used carbide circular saw blade for sawing aluminum Article: 80040160 TFZ neg (GEBR-B3) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 800 mm ● Mounting hole 40 mm ● Teeth 160 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 6 mm ● Master blade 5.5 mm ● Thickness of carbide tooth approx. 2.8 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 4) Used carbide circular saw blade for sawing aluminum Article: 99040180 TFZ neg (GEBR-B2) Application: Long cut circular saw Note: little used, top condition Dcsdpfxjtzwtbo Adron Technical description Diameter 990 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 5.5 mm ● Thickness of carbide tooth approx. 3.7 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm

Condition: used, functionality: fully functional, Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Dcedpfxoz D Hrvj Adrjn Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T

Condition: excellent (used), Swing over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing over slide 700 mm Spindle bore 128 mm Spindle speeds 6.4-1'600 rpm Dodpewhkdcefx Adrecn SIEMENS 810 D control Misc. accessories MARCELS MASCHINEN CH

Condition: new, Year of construction: 2025, Ref. -No.: 10465 Manufacturer: IGREK Type: FR 1000 T Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens / Heidenhain Storage location: Istanbul Country of origin: Türkiye X-Travel: 1350 mm Dcedpfx Ajxmd S Iedren Y-Travel: 1500 mm Z-Travel: 900 mm B-Axis: ° C-Axis: 360 ° Spindle Taper: HSK-T100 Turntable diameter: 1000 mm Table Load: 2000 kg Tool Piece Magazine With: 48 Pcs./pcs. Spindle Speed: 15000 RPM Rapid Travel X/Y/Z: 48 mm / min Drive Capacity - Spindle Motor: 35 kW Max Spindle Torque: 220 Nm Machine length: 3200 mm Machine width: 6400 mm Machine Height: 4050 mm Weight Of The Machine Ca.: 40 t Further information: IGREK FR 1000 T – Compact precision for demanding applications The IGREK FR 1000 T is a CNC turning and milling center with 5-axis simultaneous machining that combines state-of-the-art technology in a compact design. Manufactured in 2024, this machine is ready for immediate use and is ideal for the precise machining of medium-sized workpieces in a wide range of industries. Key features: Compact performance: Traverse paths of 1,350 mm (X), 1,500 mm (Y) and 900 mm (Z) and a table load capacity of up to 2,000 kg provide optimal conditions for flexible applications. 5-axis simultaneous machining: With a B-axis (°/°) and a C-axis (360°), even complex geometries can be precisely machined. High-performance spindle: The spindle achieves speeds of up to 15,000 rpm, a maximum torque of 220 Nm and a drive power of 35 kW – ideal for demanding milling work. Extended capacity: A tool magazine with 48 tool spaces and the HSK-T100 holder enable quick changes and efficient processes. Top speed: Rapid feed speeds of 48 m/min on all axes minimize machining times. Technical data at a glance: Traverse paths: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Max. table load: 2,000 kg Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tons Additional advantages: Thanks to the latest control systems (Siemens or Heidenhain) and a robust machine concept, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer offers international service and comprehensive warranties. Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing – now available from stock. Contact us for more information!