Used Ms Hydraulic Servo Press for sale (31,054)

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 1315 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] Dwsdouhakuspfx Akmsc FLOOR DIMENSIONS - Dimensions ((length-width-height)) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Condition: repair required (used), Year of construction: 2000, Hydraulic press for ceramic tiles SACMI PH380, the machine has incomplete control system. Dwsdoxvdnbopfx Akmjc

Condition: used, Year of construction: 1999, 5-STATION HYDRAULIC PRESS, FISCHER PRESSURE: 5 x 80 tons Dodpfxjz A Aw Ej Akmswc TABLE DIMENSIONS: 800 x 560 mm STROKE LENGTH: 500 mm

Condition: used, Ceramic tile press SITI MAGNUM 800. Pressing force: 800 tons. Djdexu N H Hopfx Akmowc

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Manufacturer: REPKON Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Djdpfxjzub Nms Akmowc Control system defective If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2005, condition: ready for operation (used), Clearance between the frames: 890mm, throat depth: 200mm, bending width: 1000mm, press force: 280kN, connected load: 5.5kVA, required fuse protection: 3x 16A, weight: 3.5t. An inspection on site is possible. Dedpfx Aszbb R Eskmewc

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Dodpfez Hwhmex Akmewc Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm Dwjdpfx Akou N A Eajmjc machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 180 t, Pressure: 180 t Bending length: 3100 mm Frame width: 3100 mm Control: Cybelec CybTouch 15 Stroke: 250 mm Installation height: 470 mm Rapid approach (down): 180 mm/s Bending speed: 0-10 mm/s Rapid return (up): 165 mm/s Total power requirement: 15 kW Machine weight approx.: 14,000 kg Dimensions: 4255 x 2390 x 3030 mm Standard equipment: - CNC control Cybelec CybTouch 15 Windows - 4 + 1 axes: Y1, Y2, X, R, C - Mechanical crowning system: B-CM Dedpswz Et Sjfx Akmswc - Backgauge system mod. GHP-2 - Servo-driven main motor - Safety system: DSP AP+MCS Additional equipment: - 2 x front support tables - 2 x stop fingers - Hydraulic upper tool clamping Wila Style - Hydraulic die clamping Wila Style - CE standard norm

Condition: excellent (used), Year of construction: 1990, input voltage: 200 V, type of input current: three-phase, pressing force: 5 t, stroke length: 150 mm, reverse speed: 360 mm/s, table width: 400 mm, table length: 340 mm, overall weight: 400 kg, working height: 385 mm, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Dedpfewin Emex Akmjwc Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressure speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate Two-hand operation Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 14400 € 276.48 € 70 to horizontal verschiebbar 350 mm 900 mm 1050 mm max. 9 mm/s 2 kW 1950 mm 1000 mm 2250 mm 1220 kg 650 mm The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions) Dedpfx Akoypbrxomswc

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton Dedpfxetrpiie Akmswc throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: ready for operation (used), functionality: fully functional, pressing force: 100 t, stroke length: 250 mm, table width: 600 mm, table length: 1,000 mm, ram plate length: 300 mm, No minimum price – guaranteed sale to the highest bidder! Dwodozza Uhopfx Akmjc TECHNICAL DETAILS Pressing force: 100 t Maximum stroke: 250 mm Press model: Workshop press Press design: Single-acting Table length: 1,000 mm Table width: 600 mm Table bore diameter: 140 mm Ram length: 300 mm Ram width: 300 mm Height adjustment: 250 mm Column spacing, length: 2,000 mm MACHINE DETAILS Drive system: Conventional Transport packages: 3 pieces Transport weight: 8,000 kg

Condition: excellent (used), CATALOGUE NUMBER 7926 TECHNICAL DATA - working length 6200mm - working width 150mm - working height 1350mm Dwjdezmfvuopfx Akmoc - 12 vertical hydraulic cylinders - dimensions (L/W/H) 6580/1270/2350mm - weight approximately 4000kg ADVANTAGES - very good condition - used press - unpainted - designed for professional use Net price: 69900 PLN Net price: 16256 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Technical details: pressure: 6 t Dsdpfx Asu Nfm Tjkmowc distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1640/1300/H2650 mm Dwodpfx Aoyzd I Ujkmec -Weight: 4440 kg

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. Dwjdpfxsw U U Svs Akmjc - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: used, Hydraulic valve, servo valve, proportional valve Hydraulic servo valve, continuously variable valve, PARKER DFplus type D3FPE02YC9NB00 20 Manufacturer: Parker Hannifin GmbH Dwjdpfoz Eu E Hox Akmoc Operating voltage: 24 VDC Operating pressure: max. 350 bar Length = 245 mm Width = 70 mm Height = 155 mm Weight: 6.2 kg Good condition

Condition: used, pressure 100 t stroke 400 mm daylight longitudinal/sideways 1010 x 300 mm Motor output 4,0 kW liter capacity 11,0 l dayligth 900 mm table surface area 1010 x 560 mm feed down 4,8 mm/sec feed up 7,5 mm/sec weight of the machine ca. 0,9 t dimensions 1320 x 900 x 2450 mm High-quality hydraulic press can be operated manually or by motor. Cylinders can be moved sideways. Dwjdpfx Asvu E Uwskmoc Safety valve at cylinder end position. CE marked

Condition: used, Year of construction: 1981, USED ALUMINIUM PROFILE PRODUCTION LINE GENERAL INFORMATION Equipment: Aluminium Extrusion Press Manufacturer: Youngstown (USA) Press Capacity: 1,650 Metric Tons Press Type: Horizontal Hydraulic, Direct Extrusion Year: Unknown (1980s) Refurbished: 1999 Condition: Under Power Availability: Immediate Djdpfx Akjzy H Rmsmewc 1. INDUCTION HEATING SYSTEM - Make: Local - Control: PLC (LS Master-K80) - Built in: 1999 - Rated Power: 200 kW - Loader included 2. EXTRUSION PRESS - Rated Extrusion Force: 1,650 Tons - Main Ram Stroke: 1,200 mm - Maximum Extrusion Speed: 15 mm/sec - Maximum Extrusion Pressure: 20–25 MPa Control System - PLC System: LS XGK - HMI: Touch Screen Operator Panel - Control Modes: Manual / Semi-Automatic / Automatic - Process Control: Extrusion Pressure & Speed Control Hydraulic System - Main Working Pressure: 20–25 MPa - Main Motor Power: 2 × 132 kW - Hydraulic Pumps: 2 × Kawasaki LZ-500-110R1 (600 L/min) - Oil Tank Capacity: 8,000 Liters - Oil Cooling Pump: 120 L/min Billet & Container - Container Cylinder: Ø203.2 mm - Container Heating: Induction - Billet Diameter: 150 mm - Billet Length: 550 mm Die & Tooling - Maximum Die Diameter: 230 mm - Die Change System: Manual - Die Heater 3. RUN-OUT TABLE - Length: 40 m - Cooling: Water / Air - Profile Support Rollers 4. PULLER - Speed synchronized with extrusion - Hydraulic gripping system 5. SHEAR - Cylinder: Ø155 mm - Stroke: 571.5 mm 6. COOLING BED - Length: 40 m 7. STRETCHER - Capacity: 25 Tons - Length: 30 m 8. CUTTING SAW 9. PACKING SYSTEM - Profile Stacking - Bundle Tying FLOOR SPACE 20 × 60 m

Condition: excellent (used), I sell a Lukas baler in very good condition. Dsdpfx Ajum Htzskmewc

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation Dwedev Rwu Ujpfx Akmjc

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Manufacturer: CEMBRE Dwodpfxsy H Rdgj Akmec Model: B35-50D Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: Dwsdpexabnasfx Akmjc * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual Dwjdpfx Aoxaar Dskmjc