Used Muhr Und Bender / Mubea Rebar Bender for sale (6,055)

Condition: ready for operation (used), Bosch CC 220 FARB-PL1.0-14" / control panel with color monitor SN:874965. The item has been checked and tested! Used, with normal signs of wear, 100% functional. Scope of delivery as per photos. Tsdpjx Eqw Rsfx Ahmsc

Condition: ready for operation (used), Huber Ministat 240 Compact Refrigerated Circulating Thermostat for Laboratory and Industrial Use, SN: 74948/07, used, normal signs of wear, 100% functional, scope of delivery as per photos. Todpfx Ahjx Etu Ejmjc

Condition: ready for operation (used), Siemens 6FC5247-0AF08-4AA0 hard drive with mounting bracket and damper for PCU 50.3 6FC5210-0DF31-2AA0, 6FC5210-0DF33-2AA0, 6FC5220-0AA31-2AA0, 6FC5220-0AA33-2AA0. Used, in like-new condition, 100% fully functional. Scope of delivery as shown in the photos. Todpfx Aex Eurxjhmjc

Condition: new, Beckhoff AX5203 servo amplifier SN: 000523885, unused in sealed original packaging, 100% functional, delivery as per photos Tsdpfx Ahex Ht Dpomoc

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Tjdpfx Ahjwtpgtomoc Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Grundfos motor 0.55 kW -Flow volume: 3m³/h -Container with level indicator and magnetic switch Todpswupr Ssfx Ahmjc -Dimensions total: 550/530/H600 mm -Weight: 43.4 kg

Condition: used, functionality: fully functional, PROFILE BENDER FOMP DIMENSIONS: 160X120X115 (h) cm, WEIGHT: 1300 KG Tsdev Ifq Ejpfx Ahmsc

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. Tsdpfx Ahovxipgjmec 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: used, Year of construction: 2020, Overview These fermentation tanks were manufactured in 2020 by the German company Speidel. They are CE-certified, equipped with a cooling jacket, and rated for up to 2.5 bar pressure. The tanks are in good condition and available immediately. Technical data  - Capacity: 2 × 1,250 liters - Pressure rating: 2.5 bar - Cooling jacket: Yes - Certification: CE Scope of Delivery  - 2x 1,250-liter fermentation tanks Tsdpfx Aswfq Dkshmjc  

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: manual, bending angle (max.): 130 °, overall weight: 280 kg, warranty duration: 24 months, Sheet Metal Bending Machine / Bender / Brake - RG-C 2012 + Cutter 2.0-Meter Sheet Metal Bender – Professional Tool for Roofers Our 2.0-meter sheet metal bender is a durable and precise machine designed for roofers and sheet metal professionals. With its sturdy construction and advanced mechanisms, it ensures high reliability and ease of use, even under intensive operation. Equipped with additional functionality-enhancing features, this model allows for greater precision, repeatability, and ease of metal sheet handling. Key Features: ✅ Working length: 2100 mm – enables efficient bending of sheet metal, increasing productivity. ✅ Sturdy steel construction – guarantees longevity and resistance to deformation. ✅ Precision bending – perfect for producing roofing elements, sheet metal trims, and gutters. ✅ Easy operation – an intuitive control mechanism enables quick and accurate sheet shaping. ✅ High clamping force – stabilizes the material, ensuring uniform bending along the entire length. ✅ Optional accessories – possibility to equip with additional accessories for enhanced functionality. Our 2.0-meter sheet metal bender is an indispensable tool on any construction site, improving the quality and efficiency of roofing work. ❗️2.0-Meter Sheet Metal Bender – Technical Specifications❗️ Maximum bending length: 2100 mm / 83" Maximum bending capacity: ➡️ Steel sheet: up to 1.2 mm ➡️ Aluminum sheet: up to 1.5 mm ➡️ Copper and zinc sheet: up to 1.5 mm ➡️ Stainless sheet: up to 0.6 mm Maximum bending angle: 130° Bending beam thickness: 25 mm Maximum clamping beam lift height: 100 mm Overall dimensions: 2460 x 900 x 1200 mm Weight: Approx. 280 kg (varies depending on configuration) Clamping system: Manual with high clamping force for stable operation Construction: Heavy-duty steel frame ensuring durability and precision Accessories (included): ▪️Back support arms for large sheets ▪️Functional protractor for precise angle bending ▪️Roller cutter / shear - for quick and precise cutting of sheet metal along the working length of the bending machine Optional accessories (not included): ▪️Swivel casters with brake Enhanced Features for Precision and Efficiency: Todsv D Hw Sopfx Ahmsc 👉 Rear support table – simplifies sheet metal positioning for smooth, accurate processing. 👉 Angle gauge – ensures repeatability of bending angles for consistent results. 👉 Front measuring bumpers – enable cutting multiple sheets to the same width without additional measurements. 👉 Solid steel springs – assist the bending beam, providing lifelong durability and eliminating the need for replacements, unlike gas springs. 👉 Turnbuckle adjustment – allows fine-tuning of the clamping beam force based on the thickness of the processed sheet, ensuring a secure and even hold. Applications and Benefits: This 2.0-meter sheet metal bender is an essential tool for roofing contractors, sheet metal workers, and workshops, offering an efficient and precise solution for bending roofing components, flashings and various sheet metal trims. With its user-friendly features, repeatable precision, and enhanced durability, it is the perfect choice for professionals seeking high-quality results. The price does not includes shipping cost. Contact us for more information and to find the perfect model for your needs!

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 2,500 mm, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, pressure: 150 bar, wall thickness: 2 mm, working length: 2,000 mm, Equipment: documentation/manual, 38x2mm Twin Head Tube Bending Machine The “Gemini” tube bending machines structures. This type of tube benders bend the tubes with own two bending heads. Gemini has 3 different type which are DB, DBF, DBFR. 1 pc. Ø38mmx2mm 2 pcs. Ø25mmx1,5mm 3 pcs. Ø16mmx1,5mm 4 pcs. Ø13mmx1,5mm DB series makes bending operation automatically. DBF series makes bending and feeding operation automatically. Tedpfevuqmxjx Ahmsc DBFR series makes bending, rotating and feeding operation automatically.

Condition: used, maximum load weight: 28,410 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2012, loading space length: 13,600 mm, loading space width: 2,400 mm, loading space height: 700 mm, FLIEGL flatbed semi-trailer with drop sides and 3 axles Payload: 28,410 kg TYPE: SDS350 Tsdpfewgghnex Ahmjc Brakes: disc Axle: BPW + air suspension 2x landing legs (JOST) Length: 13.60 m Width: 2.40 m Height: 0.70 m We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: good (used), 16 Bucher hydraulic pumps in a package. 8 x 5-H2-40 1,450 rpm 40 l/min Weight 47 kg. 8 x 2-H2-4 1,450 rpm 4 l/min Weight 7 kg Tedpfx Ahewg Hlgemjc

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11800 € 226.56 € 60 mm 215 mm 215 mm 3 1.5 kW 4 m/min 80x20 mm / 1200 mm; 40x10 120x25 mm / 600 mm; 50 x 50x50 mm / 800 mm; 20x20 Ø 50 mm / 800 mm; Ø 20 mm Ø 100x2 mm / 1600 mm; Ø 6 80x40x3 mm / 1400 mm; 40x 70x3 mm / 1600 mm; 40x2 m 70x70x7 mm / 1000 mm; 40x 70x70x7 mm / 1200 mm; 40x Tsdpfewiq S Nex Ahmjc 1000 mm 1400 mm 1650 mm 950 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES!

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Two used TEKA scrapers are offered. 1. THS 4020, built in 2009, scraper arm: 16.00 m, 2. THS 6022, built in 1993, scraper arm: 16.00 m. Todpfxjv Tb A Is Ahmsc Fully functional. For further information, see the rating plate.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 20400 € 391.68 € 80 mm 245 mm 3 4 kW 6 m/min 100x20 mm / 2000 mm; 80x2 125x25 mm / 600 mm; 60x5 45x45 mm / 500 mm; 15x15 Ø 50 mm / 500 mm; Ø 15 mm Ø 100x2,5 mm / 1.200 mm; 80x25x3 mm / 800 mm; 25x1 70x70x3 mm / 1.300 mm; 25 80x80x8 mm / 800 mm; 30x3 70x70x7 mm / 700 mm; 30x3 UPN 140 / 1600 mm; UPN 12 UPN 140 / 1.600 mm; UPN 1 IPN 120 / 600 mm; IPN 80 1450 mm 1000 mm 1400 mm 1700 kg 3 motor driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations Todpjwirvvofx Ahmjc WE HAVE MORE THAN 210 REFERENCES!

Condition: used, functionality: unexamined, Compressed Air System Atlas Copco Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control unit ES 6 Incl. 1000 l air receiver GA11VSD+FF, year 2017, operating hours: approx. 20,000 Tjdevx Nmfjpfx Ahmoc GA18 PLUS, year 2007, operating hours: approx. 58,000 Buyer is responsible for professional dismantling. Forklift is provided.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Tsdpfex A Nntjx Ahmjc Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. Todpfx Ahsyak Ansmec The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 103000050, load capacity: 250 kg, Equipment: documentation/manual, The MiR250 is a more flexible AMR – compact and powerful. Tsdpfsyf Etxox Ahmoc The MiR250 features a small footprint of just 580 x 800 mm and a height of only 30 centimeters. Despite its size, it easily transports loads of up to 250 kg and can travel at speeds of 2 meters per second. This agility sets it apart from all other AMRs on the market and makes it particularly adaptable to demanding environments. Thanks to its compact design, it can navigate spaces with a width of just 80 centimeters. This means that doors and elevators, which might pose a challenge for other mobile robots, are no obstacle for the MiR250. The MiR250 is engineered for durability and can operate around the clock, with a battery that can be replaced quickly. Additionally, it meets the latest safety standards – which is why we believe it is the safest AMR on the market. It has so far only been used in laboratory conditions and has virtually no operating hours. Accessories: - Cable Charger Lite 48V, 3A, wired charger - WISE WLAN EA module 4060, 4x digital inputs, 4x relay outputs

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner at your side. Folding bench ZGR-2000T/0.8 incl. transport rollers Maximum working length of press brake: 2140 mm Bending performance: up to 0.8 mm (steel sheet) Titanium Zinc Sheet: 0.8mm Aluminum Sheet: 1.2mm Copper Sheet: 1.25mm Bending machine bending angle: 145 degrees max Cut with the roller shears over the entire working width Bending beam thickness: 15 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Upper beam stroke: 80 mm degree scale Tedpecxu Uxsfx Ahmoc Weight of the folding bench: approx. 180 kg Roller scissors 0.8mm plus 350 euros Manual folding machine 75 euros Price: 1350 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Year of construction: 2026, Are you looking for a machine for sheet metal processing? Do you expect quality and reliability? Professional advice as well as accurate and punctual deliveries will be provided by Prod-Masz. ZGR-2140/1.5mm (2mm Alu) the maximum working length 2140 mm the thickness of the steel sheet up to 1.5 mm non-ferrous metals 30% higher bending performance bending angle: 145 degrees (on request up to 165 degrees) cut throughout the working length a table for supporting the rear plate Tedoc Ikrqjpfx Ahmsc gas springs beam curving 20 mm weight approx 350 kg hand-held machine raising the upper beam into three positions maximum ground clearance of 100 mm between the beams

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-1400/1.2mm Technical data: - Maximum working width: 1400 mm - Sheet gauge up to: 1.2 mm (Steel) - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 15 mm - Protractor - Weight: 150 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) - The machine have certificate CE and 12 months warranty. Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1050 Euro ( VAT excl. ) Contact with what's app We provide invoices with 0% of tax. Tjdpfx Asc Nxwyehmoc

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Tjdpfxekvm Szo Ahmjc Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll Tedpekvm S Nefx Ahmec 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!