Used Muller Hydraulic Press for sale (27,018)

Year of construction: 1959, condition: used, The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible. Dcjdpfezv T Iwox Adron

Condition: used, Ceramic tile press SITI MAGNUM 800. Pressing force: 800 tons. Dodpoxu N H Hsfx Adrjcn

Condition: used, pressure 100 t stroke 400 mm daylight longitudinal/sideways 1010 x 300 mm Motor output 4,0 kW liter capacity 11,0 l dayligth 900 mm Dcsdpfevu E Uwox Adrjn table surface area 1010 x 560 mm feed down 4,8 mm/sec feed up 7,5 mm/sec weight of the machine ca. 0,9 t dimensions 1320 x 900 x 2450 mm High-quality hydraulic press can be operated manually or by motor. Cylinders can be moved sideways. Safety valve at cylinder end position. CE marked

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm Dedpfou N A Eaex Adrscn *

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m Dcjdpfxeu Nfm Te Adron HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 14400 € 276.48 € 70 to horizontal verschiebbar 350 mm 900 mm 1050 mm Dcodjypbrxopfx Adron max. 9 mm/s 2 kW 1950 mm 1000 mm 2250 mm 1220 kg 650 mm The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Dsdpfx Aozub Nmodrecn Manufacturer: REPKON Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Control system defective If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 1990, input voltage: 200 V, type of input current: three-phase, pressing force: 5 t, stroke length: 150 mm, reverse speed: 360 mm/s, table width: 400 mm, table length: 340 mm, overall weight: 400 kg, working height: 385 mm, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressure speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate Two-hand operation Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Dsdpfewin Emsx Adrecn Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Dedpfjv Rwu Usx Adrscn Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: used, Year of construction: 1981, USED ALUMINIUM PROFILE PRODUCTION LINE GENERAL INFORMATION Equipment: Aluminium Extrusion Press Manufacturer: Youngstown (USA) Press Capacity: 1,650 Metric Tons Press Type: Horizontal Hydraulic, Direct Extrusion Year: Unknown (1980s) Refurbished: 1999 Condition: Under Power Availability: Immediate 1. INDUCTION HEATING SYSTEM - Make: Local - Control: PLC (LS Master-K80) - Built in: 1999 - Rated Power: 200 kW - Loader included 2. EXTRUSION PRESS - Rated Extrusion Force: 1,650 Tons - Main Ram Stroke: 1,200 mm - Maximum Extrusion Speed: 15 mm/sec - Maximum Extrusion Pressure: 20–25 MPa Control System - PLC System: LS XGK - HMI: Touch Screen Operator Panel - Control Modes: Manual / Semi-Automatic / Automatic - Process Control: Extrusion Pressure & Speed Control Hydraulic System - Main Working Pressure: 20–25 MPa - Main Motor Power: 2 × 132 kW Dsdpfozy H Rmex Adrjcn - Hydraulic Pumps: 2 × Kawasaki LZ-500-110R1 (600 L/min) - Oil Tank Capacity: 8,000 Liters - Oil Cooling Pump: 120 L/min Billet & Container - Container Cylinder: Ø203.2 mm - Container Heating: Induction - Billet Diameter: 150 mm - Billet Length: 550 mm Die & Tooling - Maximum Die Diameter: 230 mm - Die Change System: Manual - Die Heater 3. RUN-OUT TABLE - Length: 40 m - Cooling: Water / Air - Profile Support Rollers 4. PULLER - Speed synchronized with extrusion - Hydraulic gripping system 5. SHEAR - Cylinder: Ø155 mm - Stroke: 571.5 mm 6. COOLING BED - Length: 40 m 7. STRETCHER - Capacity: 25 Tons - Length: 30 m 8. CUTTING SAW 9. PACKING SYSTEM - Profile Stacking - Bundle Tying FLOOR SPACE 20 × 60 m

Condition: excellent (used), I sell a Lukas baler in very good condition. Dcedpfx Aoum Htzodren

Condition: excellent (used), Year of construction: 2007, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, FEISSLER machine mounted electronic laser guards , side and rear interlocked fencing Model Amada HFT 100/3 downstroke CNC Press brake Year 2007 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Dedpfx Aozbql Sodrjcn Throat Depth 420 mm CNC Control 12000 hours BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed Dsdpfow U U Svsx Adrecn - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm Dodpfxjvc Awxs Adrocn height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition Dcsdpetrpiijfx Adren

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Dcjdsy H Rdgjpfx Adron Manufacturer: CEMBRE Model: B35-50D Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm Dcsdjxaar Dspfx Adrsn column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm Djdpfxoxabnao Adrocn column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm Dcodpfoxaayhex Adren ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions Dodpfxoxaakgo Adrocn

Condition: used, Year of construction: 1981, Technical details: pressure: 30 t distance between columns: BxT: 600/450 mm daylight dimension : table/slide up: 650 mm ram stroke: ca. 600 / highspeed strokes mm table surface area: LxB: 500 x 700 x Ø 60 mm surface area of ram: 650 x 800 mm hydraulic-pressure: 170 bar air pressure - required: 4 - 6 bar total power requirement: 11 kW weight of the machine ca.: ca. 2,0 t dimension machine xH: 1,26 x 1,75 x 3,4 m Four-column press, hydraulic Possible applications: can be used as a deburring press Further technical features: Dcodju Nfmaspfx Adrjn - Table aperture 200x250mm - Opening in ram Ø 160mm - Passage in the column width 600 and depth 450mm - Operation via control panel Equipment: - Protective grille - Base plates *

Condition: ready for operation (used), functionality: fully functional, pressing force: 100 t, stroke length: 250 mm, table width: 600 mm, table length: 1,000 mm, ram plate length: 300 mm, No minimum price – guaranteed sale to the highest bidder! Dsdpfjzza Uhjx Adrscn TECHNICAL DETAILS Pressing force: 100 t Maximum stroke: 250 mm Press model: Workshop press Press design: Single-acting Table length: 1,000 mm Table width: 600 mm Table bore diameter: 140 mm Ram length: 300 mm Ram width: 300 mm Height adjustment: 250 mm Column spacing, length: 2,000 mm MACHINE DETAILS Drive system: Conventional Transport packages: 3 pieces Transport weight: 8,000 kg

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder Dcedpfx Adexabcweren - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm Dcodpfx Adsyzd I Uoren -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm. Dodswcz Axopfx Adrecn