Used Multi-Spindle Head 3 Drills for sale (77,679)

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Iiodpfx Amjzuc T Tjgjh Specifications, information, price, images, etc. can be found in the PDF documents attached.

Condition: ready for operation (used), Key Specifications – MBP 14‑Head C2T Series: MBP C2 (stainless steel, central-feed, food-grade) Number of Weigh Heads: 14 Weigh Height/Capacity: Up to 5,000 g per weighment Operating Speed: Up to ~180 weighments per minute Bucket Type: Smooth stainless-steel buckets – ideal for reducing product stickiness Drive & Controls: Iodpfxjwqq Nks Amgoih Stainless-steel construction for all product contact parts Step-motor‑controlled bucket gates ensure precise portion release Windows‑based multimedia control system with remote access/diagnostics Electrical Requirements: 230 V, 1‑phase, 60 Hz, 10 A Multivac R530 🔧 Key Specifications • Machine Dimensions: o Length: Approximately 6,600 mm to 8,500 mm, depending on configuration o Width: Approximately 1,050 mm to 1,200 mm o Height: Approximately 1,900 mm to 2,000 mm o Weight: Approximately 2,500 kg to 3,175 kg • Film Specifications: o Lower Film Width: Typically ranges from 420 mm to 528 mm o Upper Film Width: Typically ranges from 415 mm to 510 mm o Film Thickness: 50 to 500 microns, depending on material o Advance (Pitch): Commonly between 228 mm to 320 mm • Forming Area: o Length: Up to 521 mm o Width: Up to 400 mm o Depth: Up to 145 mm • Performance: o Cycles per Minute: Typically between 7 to 20, depending on application and configuration • Utilities: o Voltage: 400V, 3-phase, 50 Hz o Power Consumption: Approximately 19 kW o Compressed Air Requirement: 7 to 10 bar o Water Connection: 1.5 to 4.5 bar

Condition: used, Year of construction: 2018, Technical details: Iisdez Sr Duspfx Amgsh weight of the machine ca.: 3,5 t

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Iodpfx Aez Ag Anomgeih Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Additional accessories

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x2300x1780 mm Weight 4000 kg Total power requirement 27,2 kw Ijdpsvz Hrdefx Amgoih

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm Ijdpfxju Idxre Amgjih dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: Iisdju Idxfepfx Amgeh number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Year of construction: 2004, Tornos MultiDeco 20/8 Number of spindles: 8 Maximum bar diameter: 20 mm Spindle speed: 5000 rpm Main spindle power: 15 kW / 18.5 kW Maximum part length: 100 mm without backworking; 75 - 80 mm with backworking Number of backworking spindles: 1 Backworking spindle axial travel: 160 mm Backworking spindle motor power: 1.1 kW CNC control unit: Fanuc Programming system: TB-DECO software platform IEMCA integrated automatic bar feeder High-pressure coolant pump and fine filtration system Automatic chip conveyor Iiedpfx Aszy Spuomgeh The machine is in working condition and can be inspected upon request.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Isdpfoz Ag A Iex Amgeih Holders Additional accessories

Year of construction: 2018, operating hours: 7,879 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 8110000014B, A rebuild of the machine took place in 2021: - Change of bar feeder from Chucci to Iemca Next 25-33 - Change of control from Fanuc 30i-B to Fanuc 611 SL IV (Slim Line) Ijdpfjmduh Eex Amgoih - Addition of valve block for hydraulic control of cooling lubricant supply (equipped with 28 controllable valves for high pressure) - an electronic parts shuttle for unloading the workpieces was installed - converted to a tool breakage monitoring system Artis / CTM program TECHNICAL DETAILS bar capacity: 36 mm number of main spindles: 6 number of cross slides X-Y axes: 6 C axes: 6 angular resolution: 0,002 ° Rotational speed: 7500 rpm rapid traverse: 40 m/min spindle positioning: 0,1° Drive unit tool speed: max. 13800 rpm MACHINE DETAILS working area: 21,9 sqm (with loader) net weight machine: 15 t chip conveyor: included LUBRICANT DETAILS oil tank volume: 1.800 l total oil volume: 2.000 l 6,3 bar: 140 l/min 45 bar: 100 l/min 80 bar: 50 l/min BAR FEEDER DETAILS Model: Iemca Next 42/33 bar length: max. 3300 mm bar length: min. 2400 mm Loading capacity as area loader: 450 mm bar diameter: 4 - 36 mm Guide channels: 6 fixed + 6 movable (with spindle reduction tubes and bushings)

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm Isdpfoz Ag Abox Amgoih MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: excellent (used), Year of construction: 2011, The grinding machine is in very good condition and fully operational. Iodpfoyuyucox Amgoih

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Iiodpjy Ed Atefx Amgsh Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (max.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum bar capacity: 32 mm Maximum bar feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Spindle speed for turning: 200–3,150 rpm Spindle speed for right-hand thread cutting: 11.2–1,575 rpm MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Required space: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW Iiodpfoz Agz Dox Amgjh EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Tool holders Additional accessories

Condition: used, Technical details: spindle taper: SK40 spindle stroke: 175 mm number of spindles: 8 Stück number of stations: 5 Stück cycle time: 15-20 sec revolutions per minute: bohren/drill/taladrar 225...1037 U/min. revolutions per minute: gewinde/threading/roscar 50...316 U/min. feed: 0,2 m/min total power requirement: 30 (40PS) kW weight of the machine ca.: 9,0 t space requirements of the machine approx.: 3,9x2,4x2,5 m dimensions of machine: L:3,9xB:2,2xH:2,7 m dimensions L x W x H: +Anlage/plant/planta 2,7x2,52x2,25 m The machine will be on a General overhaul (pictures from original condition at the former Company) The machine has been constructed for the metal cutting process of workpieces in one clamping session. Especially blanks made of brass with a diameter 90mm x approx 100mm length would be machined with this machine. description: - workpiece support with switch plate with clamping station type round table with horizontal axis with 5 workpiece stations processing units: Iedpfx Aju Idycjmgsih - drill spindle and thread cutting units - drill capacity up to 2 3/4" and 81,53mm in brass - thread cutting up to 2 1/2" und metric thread Machine is equipped with a feeding-and unloading unit for workpieces. ( feed capacity 3 -4 pieces/min and cycle time 15 - 20 sec.) furthermore incl. coolant device i.D. *

Condition: used, Year of construction: 2005, Technical details: spindle passage: 36 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: A36PC Yob: 2005 Loading magazine by Pietro Cucchi Knoll unit 7 radial cross-type carriages 2 additional speed motors in 4th and 5th positions 2 additional speed motors for front spindles in position D (pick-up) and B (for front motorized spindle) 1 polygon cutter 1 motorized front spindle 1 radial motorized in position IV for cross-type carriage 1 radial motorized in position V to be mounted on X-type carriage only (no cross-type carriage) 1 straight head for motorized position IV 1 90-degree tilted head for motorized position IV 1 tilt-adjustable head for motorized position IV Please, contact us for getting more information and pictures on mail(at) or Ijdpfx Amjzg Aw Nsgjih *

Condition: good (used), Year of construction: 2006, Number of working spindles: 6 pieces Bar spindle diameter capacity: 32 mm Working spindle maximum speed: 6000 rpm Spindle chuck diameter: 40 mm Maximum number of tool carriers: 12 pieces Tool carrier travel distances: X = 72 mm, Z = 100 mm Part catcher receiver available in 6.1 position KNOLL chip conveyor In-machine air intake filtration system available (ventilation) Weight: 7,200 kg Isdpfx Asrqzzpemgjih Magazine: IEMCA 3300 mm capacity bar feeder

Condition: good (used), Year of construction: 1997, functionality: fully functional, Stürtz horizontal 4-head welding machine for welding plastic components. Welding dimensions: 2600 x 3000 mm Weld bead height limit: 2.0 mm (adjustable to 0.2 mm) Isdpfx Aszfky Njmgjih Suitable for welding entrance doors. Penetration depth: 6.0 mm Operation via PC Jetter (Dell PC conversion kit)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, URBAN AKS 6410/4 four-head welding machine, from right to left, maximum welding dimensions: 2,700 × 2,500 mm, Windows control system, weld bead limit of 0.2 mm for coloured profiles, previously operated on a single shift, technically refurbished and fully functional. Iisdpfx Asznwq Temgeh

Condition: used, 4-spindle vertical drilling machine for curved pieces such as chair backs or similar Isdpezb A Rgefx Amgsih

Condition: ready for operation (used), Machine in good operating condition Iisdpfsy Rnkrsx Amgsh

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz Iiodpfoxddwrex Amgeh - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: used, Horizontal drilling machine with 4 spindles Iijdozxg Dqspfx Amgjh

Condition: excellent (used), Drilling heads – special gearboxes for Nottmeyer, etc. various drilling heads Iedpfsgrkmvsx Amgoih

Condition: good (used), Year of construction: 1995, Electrical connection rating: 1.75 kW 380/220 V/ 5.2 A Total length with side tables: approx. 2520 mm Depth max. approx. 1170 mm Iisdpfjxrp Nijx Amgsh Height max. 1550 mm