Used Multihog Cx 75 Mk I for sale (59,706)

Year of construction: 2025, condition: new, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or Hedpfx Aod Hqa Ijmgon UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Hjdsi Dtbiepfx Amgsn Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control Hodpfx Asi Dtbuemgsn OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Hjdpfx Aei Dtbqemgsn Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW weight 75.0 kg including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable Hsdpfxoxabais Amgjn - Patented strap tensioning system - Robust three-phase motor - Low vibration

Condition: ready for operation (used), GMN TSE 75 cdu x 200/30000 high speed spindle, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Hodpoi Eaa Rofx Amgon

Condition: ready for operation (used), Heldt & Rossi Series 806 (807/2) DC servo amplifier type 500-75, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hsdpfx Amei Ea D Esgen

Condition: ready for operation (used), Grundfos MTR15-9 / 2 A-W-I-HOOK submersible pump Model: A99371564P31750 SN:0001,used, normal traces of use, 100% functional, scope of delivery according to photos Hsdpslmtawjfx Amgsn

Condition: ready for operation (used), Control Techniques CD II 75 frequency inverter , serial no. according to photo ,used, normal traces of use, 100% functional, scope of delivery according to photos Hodpfxei D Umze Amgon

Condition: ready for operation (used), GMN TSE 75 cdu x 260/15000 high-speed spindle, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hjdpji Eaa Uefx Amgen

Condition: ready for operation (used), Festo 559342 / EGSL-BS-75-300-20P mini slide, used, in good condition, 100% fully functional, delivery as shown in the photos. Hsdpjx Erlpsfx Amgon

Year of construction: 2010, condition: used, Technical details: stations: 24 weight of the machine ca.: 3,5 t ·Precise serial production of part families and demanding workpieces ·Table index repeatability of ± 2.5 µm ·24 stations with up to 44 machining units for very high output rates Hjdpfx Amew Udx Ssgon ·Ideal for high volume production with fast cycle times *

Condition: used, power: 1 kW (1.36 HP), gearing type: other, overall weight: 2,500 kg, empty load weight: 850 kg, maximum load weight: 1,650 kg, first registration: 04/2000, Year of construction: 2000, driver cabin: other, Very well maintained sorting grapple, top condition, completely sandblasted and painted, opening width 1,600 mm, cutting width 1,000 mm, for excavators from 15-20 tons, quick coupler and head plates on request, If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Hjdpfxoxawyxo Amgon Subject to alterations, prior sale and errors excepted. - .

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, rotational speed (max.): 1,250 rpm, travel distance X-axis: 850 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain TNC 355, TECHNICAL DETAILS X-travel: 850 mm Hodoxn I U Njpfx Amgjn Y-travel: 1,000 mm Z-travel: 700 mm Tool holder: SK 40 Speed: 15 - 1,250 rpm Spindle quill: 75 mm MACHINE DETAILS Control: Heidenhain TNC 355

Condition: used, mileage: 103,000 km, power: 184 kW (250.17 HP), first registration: 02/2002, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, Equipment: air conditioning, MOBILE ART PRACTICE/ OFFICE !!! DAF CF 75-250 Manual gearbox Air suspension Hsdpjt Ex N Sjfx Amgon air conditioning hydrl. outriggers Insulated box Toilet with washbasin Waiting room 2 x single rooms Rear meadow Rear entrance and side entrance 3 x air conditioning etc....

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit Hsdpfxox Thzpe Amgjn 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Condition: used, mileage: 179,245 km, power: 59 kW (80.22 HP), first registration: 09/1970, fuel type: diesel, empty load weight: 3,930 kg, maximum load weight: 3,470 kg, overall weight: 7,400 kg, tire size: 8.25R15, axle configuration: 4x2, wheelbase: 3,500 mm, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 2, loading space volume: 5 m³, Vehicle location: Bovenden, rear window, switch 5, leaf suspension Hjdevhg Thjpfx Amgen Wheelbase: 3500 mm Body: Vogt tank 5000 ltr. ( 1 chamber ) aluminum tank, hose reel, Vogt tank 5000 lt. ( 1 chamber ), classic car ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 1,001 km, color: green, driver cabin: other, gearing type: other, loading space length: 4,200 mm, loading space width: 2,340 mm, loading space height: 500 mm, Vehicle location: Bovenden, pendulum flaps Body: 3-sided tipper body with aluminum drop sides ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hsdpfx Amsi Rpftjgsn - .

Condition: used, mileage: 427,000 km, power: 130 kW (176.75 HP), first registration: 11/2007, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 6,000 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Year of construction: 2007, Equipment: ABS, air conditioning, electronic stability program (ESP), IVECO 75 E 18 THERMO-KING BOX AIR CONDITIONING LBW 1 TON ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * THERMO-KING V 500 * MANUAL GEARBOX * CRUISE CONTROL * ENGINE BRAKE * AIR CONDITIONING * BLATT & BLATT SUSPENSION * COMFORT SEATS * SEAT HEATING * LBW 1 TON * SPARE TIRE * LOADING AREA INFORMATION SEE ABOVE * PERM. TOTAL WEIGHT: 7,490 KG * EMPTY DIMENSIONS: 5,555 KG * PAYLOAD: 1,935 KG * TIRE SIZE: 225 / 75 R 17.5 * VERY GOOD TIRES ---- EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATE AND 15 DAYS AUSTRIAN LICENSE PLATE EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU & third countries, a deposit of EUR 100 is required. at least 500.00 ¤ / 1,000.00 ¤ levied (For sales to the EU and third countries will be levied deposit/guarentee of at least ¤ 500.00 / ¤ 1000.00) Hsdpen R Rapjfx Amgjn Subject to changes, errors and advance sales! You can find more vehicles on our Sales are made exclusively in accordance with our terms and conditions - see homepage Important note - Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: used, mileage: 217,582 km, power: 118 kW (160.44 HP), first registration: 07/2013, fuel type: diesel, empty load weight: 4,990 kg, maximum load weight: 2,500 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,690 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,300 mm, loading space length: 5,498 mm, loading space height: 2,125 mm, Year of construction: 2013, construction height: 3,300 mm, Equipment: ABS, onboard computer, tail-lift, The used Iveco EuroCargo ML 75 E 16 P is a yellow box truck with a first registration date of 15.07.2013. It has a mileage of 217,582 km and complies with the Euro 5 emissions standard, supporting environmental friendliness. The truck is powered by a reliable diesel engine delivering 118 kW (160 hp) and a displacement of 3,920 cc. The vehicle features an automatic transmission for increased driving comfort. The truck offers an internal box length of 5.5 meters, making it ideal for goods transportation. With a vehicle height of 3,300 mm, width of 2,300 mm, length of 7,300 mm, and a wheelbase of 3,690 mm, this truck provides ample space and flexibility. The permissible gross vehicle weight is 7,490 kg. The box body features two seats and two doors, and the previous owner was a single operator. Hsdpfxswwmxuo Amgen This truck is equipped with a green emissions badge (category 4), allowing access to low-emission zones. Viewings are possible without prior appointment, and delivery within Germany can be arranged for an additional charge. Sale only to business customers (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Condition: used, Name: Powder Feeder Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year built: Unknown Speed: Mixer speed: 5,6 rpm Content: 75 liters Driving force: 0.25kW. - Mixer drive 0.25 kW Dimensions: Length 800mm x Width 700mm x Height 1200mm Empty weight: 100 kg Technical doc.: No Message: Mixing drive 0,25 kW, speed 5,6 rpm Hodpoiv Ic Ejfx Amgen Condition: Used Price: On demand

Condition: used, TECHNICAL DETAILS - Volume : 4.3 [l] Hedpfxsu D I H Ss Amgon - Timer : 0-120 [min] - Temperature setting : 0-100 [°C]

Condition: used, functionality: fully functional, total height: 1,350 mm, total length: 570 mm, total width: 700 mm, overall weight: 160 kg, Tool grinding machine with tool holders in working condition. Hsdpfx Asx Trr Eemgjn

Condition: used, functionality: fully functional, For sale on behalf of a customer. Completely overhauled and supplied by us in 2008, in operation until 2024. Factory-new AirTen rotor, used only for a short period. Includes various spare parts and complete documentation. Includes infeed and outfeed conveyor as well as frame. Hodpfjxnz Rkox Amgjn

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. Hodpfjt Hw Trjx Amgjn * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.