Used Multipurpose Jam Cooker & Kettle for sale (542)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1110001, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 3,500 rpm, No minimum price – guaranteed sale to the highest bidder! Further technical details about the machine can be found in the attached machine description. TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Spindle speed: 10 – 3,500 rpm Number of spindles: 1 Rapid traverse X-axis: 25 m/min Rapid traverse Y-axis: 25 m/min Rapid traverse Z-axis: 25 m/min Feed rate X-axis: 25 m/min Feed rate Y-axis: 25 m/min Feed rate Z-axis: 25 m/min Max. workpiece height: 1,250 mm Max. workpiece diameter: 1,230 mm Max. workpiece weight: 1,500 kg Table width: 630 mm Table length: 800 mm Table load: 1,500 kg Number of tool magazine slots: 122 Tool holder diameter: 130 mm Tool length: 630 mm Tool weight: 50 kg MACHINE DETAILS Control: Siemens Sinumerik 840C Coolant supply: 50 bar Dimensions & Weight Dimensions (L x W x H): 9,500 x 8,000 x 4,300 mm Weight: 30,000 kg X, Y, and Z axes Resolution: 0.001 mm Position uncertainty P: 0.010 mm Positional scatter Ps: 0.006 mm B-axis Hnsdpfx Ajyw N Irjkrju Positioning accuracy (face gear disengaged): 10″ Indirect measuring system B-axis indexing accuracy (via face gear): 6″ Machining accuracy Circular interpolation: 0.015 mm Runout in the taper of the working spindle: 0.006 mm Pallet change accuracy: ± 0.015 mm EQUIPMENT Documentation/manual Infinitely variable speed adjustment Chip conveyor Note: The door on the right pallet station is jammed.

Condition: good (used), Year of construction: 2015, Metos Viking Combi 300EM Mixing Kettle Hnjdpfx Asyzingokrou 2015, Stainless, 300L cooking kettle, electrically heated, 41.5Kw, variable speed and temperature controls, guarded lid, tilt to discharge, 3Ph

Condition: used, Year of construction: 2020, Overview This brewhouse was manufactured in 2020 by Chinese company Shandong Yuesheng. It is a 10 hL two-vessel system designed for small to medium-sized breweries, equipped with mash/lauter tun, wort kettle, and an additional 20 hL hot water tank. The brewhouse includes steam heating, integrated pumps, and auxiliary equipment, offering a compact and professional solution for efficient beer production. The unit is in good condition and will be available by the end of April 2026. Reason of the replacement is that they will go to a new 20hl brewhouse. Technical data  - Capacity: 10 hL brewhouse, up to 2 batches per day - Formats: Beer, up to 20° Plato initial density - Vessels: 2 (mash/lauter + kettle/whirlpool) + 1 hot water tank (20 hL) - Power supply: 5.5 kW - Air supply: 6 bar - Construction: SUS304 stainless steel, mirror surface treatment, PU insulation (100 mm), polished welding seams (Ra ≤ 0.4 μm) - Heating: Steam - Features: CIP rotary ball, sparging arm, thermowell, motor with frequency conversion, grain raker, top manhole with sight glass, laser-cut false bottom, side grain door and chute, adjustable legs Scope of Delivery  - Brewhouse 10 hL | Shandong Yuesheng | 1000L | 2020 | 2 vessels (mash/lauter, kettle/whirlpool) - Hot water tank | Shandong Yuesheng | – | 2020 | 20 hL capacity Hnedpfx Aksxb S A Dorju - Heat exchanger | Shandong Yuesheng | – | 2020 | 10 m² surface - Pumps | Shandong Yuesheng | – | 2020 | 1 hot water pump, 1 wort pump - Platform with access | Shandong Yuesheng | – | 2020 | Stainless steel construction - Steam generator | Shandong Yuesheng | – | 2020 | 150 kg/h

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 liquid ring vacuum pump. Please read the description carefully from beginning to end! The pump is not suitable for: Water, the food industry, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Caution! The pump does not have explosion-proof certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal also does not have EX certificates! The pump is made of the special Alloy 59 material! This alloy is used when conventional chrome-nickel steels are no longer sufficient in terms of corrosion resistance. Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Alloy 59 is used for: environmental technology, the chemical industry (chemical processes with oxidizing and reducing acids, resistance to wet chlorine gas), and waste incineration plants. Primarily, 2.4605 is used in the chemical industry, the pulp and paper industry, and in flue gas desulfurization plants. Excellent resistance to mineral acids such as nitric acid, phosphoric acid, sulfuric acid, and hydrochloric acid, and especially to sulfuric acid/hydrochloric acid mixtures. Typical applications are: -Equipment components for processes in organic chemistry with chloride-containing media, especially when catalysts based on chlorides are used. -Multipurpose plants in the chemical industry -Plant parts in the fine chemical and pharmaceutical industries -Scrubbers, heat exchangers, flaps, fans, and agitators for flue gas desulfurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for ship diesel engines -Components for seawater and concentrated brines -Equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -Sulfuric acid coolers -Piping in geothermal power plants -Components in flue gas desulfurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 volts Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings are new, and the mechanical seal has been refurbished by a specialist company. Hnjdoigqutjpfx Akrsu Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total width: 720 mm, total length: 790 mm, total height: 1,310 mm, empty load weight: 234 kg, power: 2.2 kW (2.99 HP), height adjustment type: mechanical, New machine with 24 months warranty Stainless steel model Advantages: + Excellent price-performance ratio + Powerful planetary mixing machine with digital control + Housing made entirely of stainless steel + Complies with the strictest hygiene regulations + 10 speeds with constant power transmission + With ingredient hopper and safety grille made of stainless steel + The machine shuts down immediately when the grille is lifted + Machine stands on 4 vibration-absorbing adjustable feet + No floor anchoring required + Kettle lift with lever + Planetary gear made of stainless steel + Fast spare parts supply within 1-2 working days STANDARD accessories included in the price: - 1x 40 liter stainless steel kettle - 1x mixing beater for 40 liter kettle - 1x flat beater for 40 liter kettle - 1x dough hook for 40 liter kettle OPTIONAL accessories, available for an extra charge, prices on request: - Additional 40 liter stainless steel kettles Hnsdpfx Asivdxfokrju - Additional tools (mixing beater, flat beater, dough hook) - 20 liter equipment (1x 20 liter stainless steel kettle + 3 tools for 20 liter kettle) Technical data: - Motor power: 2.2 kW - RPM at 50Hz: 125 - 424 (level 1 - 10) - Protection: 16A-CEE plug - Connection values: 400V - 3-phase - 50Hz - Dimensions: 720 x 790 x 1310 mm (W x D x H) - Max. 1580 mm height when hood is open - Net weight: 234 kg

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Hederdzbtopfx Akronu

Year of construction: 2023, condition: new, WLO 45 KW Hot air stove ,wood stove,Heating Thanks to the powerful combustion chamber, the stove can burn up to Pick up 120 cm long pieces of wood! Furnace parameters Nominal heating output: 49,5 kW approx. 450 m2 including: axial fan with speed: 1380 rpm and output: 5500 m3/h Included in delivery: Controller to regulate the operation of the SCL-1515 fan innovative design of the air jacket that completely surrounds the cooker for maximum efficiency Indestructible range cooker made entirely of certified boiler plate p265gh and 16M06, thickness #6mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 320 kg Gross weight: 340 kg Grid: 1000 x 250 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look solid construction huge combustion chamber 120 x 80cm! large loading door User Guide Yield: 75.00% CO emission at 13% O2: 1.20 m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20%* mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / affixed to the rating plate Compliance with standard: EN13240:2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 800mm x Overall Depth: 1600mm x Overall Height: 1200mm Cooker dimensions: Width: 800mm x Length: 1200mm x Height: 800mm Upper door dimensions (3 & 4mm sheet metal): Width: 520mm x Height: 470mm Bottom door dimensions (3 & 4mm sheet metal): Width: 360mm x Height: 150mm Top Loading Port Dimensions: Width: 460mm x Height: 460mm Bottom opening dimensions: Width: 360mm x Height: 130mm Hedpjixuq Dsfx Akronu Grate Dimensions: Width: 250mm x Depth: 1000mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 200mm Foot height: 140 mm

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture Hnjdpfx Akema Azlersu • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 4.5 m Linear Unit: ProfiStop Alpha Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. Hodpfx Ajmdq Thokronu • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 7.5 m Linear Unit: ProfiStop Alpha Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2016, operating hours: 50 h, condition: like new (used), functionality: fully functional, Impiantinox Easybräu SCB 500 brewing system consisting of mash/boiling kettle, lauter tun, hot water tank Agitator in the mash tun Chopper in the lauter tun Electrically or steam heated Electrical connection 40 kW Steam condenser in the boiling kettle Hjdjq H Azzepfx Akrsnu Brewing volume from 3.5- 7 HL Complete internal piping with pumps, electric heating Heat exchanger for wort cooling Wort aerator

Year of construction: 2026, condition: new, Pasteurizing bath is suitable for the heat treatment of packaged fruit preparations (jam, wafers, herbs) or fermented preparations (vinegar, beer) and pickles. The packaging must be heat resistant as a glass or heat resistant plastic bag. The heat treatment technology is characterized by warming and holding, accurate temperature values and heat retention time by the product being treated and the user needs to know that the equipment only warms the treatment water and keeps it at the set temperature. Specifications: - Performance: 200 L/cycle - Electric demands: 12 kW, 400 V, 32 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 500x1100x900 mm - Weight: 130 kg - IP65 certified electronics - Heat exchanger: soft water Hjdefdzqlepfx Akronu - Thermometers: 1 pcs Automatic heat control, very easy to clean. With 4pcs feet. It requires minimal maintenance.

Condition: used, Year of construction: 2001, 3 MONTHS WARRANTY offer consist of: - cross folder Horizon AFC-504 AKT - flat pile feeder - delivery connector Horizon AFC-504 AKT 4-buckles cross folder - roller condition: 0% - technology: touch & work - error avoidance: misfeed-,doublefeed- and jamming control - memory folding types: 11 standard-types of folding preprogrammed - saveable jobs: 50 memories for repeat orders - knife: full automatic - numbers of buckles: 1. folding unit: 4 buckles + knife 2. folding unit: 2 buckles - sheet size: max. 490x650mm; min. 120x172mm - paper weight: 40-250g/sqm - pile height: 650mm Hnodpfou Sr Ehex Akrsu - speed: max. 27.000 cycles/h - power: 400V / 50Hz - 2,5kW - dimensions: 2.540x1.790x1.440mm - weight: 870kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: good (used), Year of construction: 2015, Joni OP200 electric steam jacketed mixing kettle 2015, DC Norris / Joni OP200, stainless, 200L with agitation and scrap surface, perfect for cooking and mixing stocks, soups, sauces, preserves, pastry fillings and more, can either use tap or tilt to discharge, 3Ph Hedpfxey Umz Rj Akrsnu

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially with the fire department and then with the municipal depot. This vehicle has a civilian truck registration as a "closed-body truck" and the papers indicate a total of 9 seats. The vehicle was initially used as a multipurpose vehicle (MZF), and later the municipality's lawnmower was transported in it. Only one bench seat is permanently installed. Two of the three bench seats were not needed in recent years and are included as loose items. The seatbelts and mounting screws are also included in their original condition. A folding table with a radio headset is still mounted on the left side, and an original large fire department first-aid kit is integrated into the interior. Engine: OM 602, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and initially runs smoothly, but after approximately 20 seconds of idling, the idling performance deteriorates significantly, and smoke starts to appear. When the engine reaches operating temperature, the smoke decreases, and the engine runs smoothly again, almost normally. The engine is either severely worn or has an engine malfunction. No precise diagnosis has been made yet. The vehicle starts immediately and functions well, and the usual engine power was fully available during a short test drive, but we do not guarantee its drivability. A repair is certainly necessary in the short term! For driving short distances or loading onto a RORO ship in the port heading to Africa, this 310 D appears to function without any problems. 5-speed manual transmission. 127 km/h. Ball-type trailer hitch with a 2000 kg braked or 750 kg unbraked towing capacity. Power steering. Original Mercedes/Eberspächer auxiliary heater (operational). Body with individual rust spots; overall, it is still relatively well-preserved due to being stored in a garage for many years. The window of the passenger door is damaged and covered with a film. The paintwork has been repaired in black around the lower part of the vehicle. Apparently, the car was always very well maintained at the fire department, but unfortunately not afterwards! Hnjdpfx Akjyx N Hqorsu The running board on the sliding door – which is still visible in the photos – has been removed for use on another vehicle and is no longer present. Unladen weight: 2370 kg. Permissible total weight: 3200 kg. Overall vehicle dimensions: Length 5345 mm / Width 1975 mm / Height 2680 mm. The tires (205R14C) are from 2013 and are not porous, with approximately 50-60% tread depth. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unaltered base for restoration. The TÜV (technical inspection) expired in 12/2025 and will not be renewed. We have deliberately kept the purchase price attractive, as comparable vehicles in good condition are now usually sold for twice the price or even higher. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for commercial businesses, freelancers, and emergency services of all kinds. Unfortunately, sales to private end consumers are generally excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT (according to §25a UStG / differential taxation).

Condition: used, Machine designed for inserting plastic bars into the slots of aluminium profiles. The drive system consists of four motorized rotors, preventing the bars from jamming during the insertion process. The AS 242 L thermal break profile bar insertion device has been designed to efficiently insert plastic bars into aluminium thermal break profiles, ensuring smooth flow, precise alignment, and reduced cycle times. No. 2 motors, 0.75 kW – 400 V – 50 Hz Operating pressure: 7 bar Bar feed speed: 100 m/min Bar guide travel: transverse 7 – 256 mm, vertical 0.5 – 140 mm Working capacity (bar height): Minimum 10 mm – Maximum 60 mm Automatic ejection of the bar tail Push-button for partial insertion of the bars into the lower profile The transverse adjustment of the bar guide is carried out via a single control equipped with a decimal position indicator. The vertical adjustment of the bar guide is carried out via two independent controls, each equipped with a decimal position indicator. Bar stop can be excluded via push-button control Machine dimensions: 1020 mm (width) x 825 mm (depth) x 1400 mm (height) Hnedpfx Aksy Idxmjrju Machine weight: 235 kg

Condition: new, AVOID WASTE, MAXIMIZE PROFIT – INTELLIGENT CUTTING REDUCES MATERIAL LOSSES. Main features: - Crosscut blade prevents jamming of the sheet - All-in-one: slitting, cutting, creasing, grooving, trimming - Quick changeover – less than 60 seconds - 22" touchscreen panel for easy control - 40+ FEFCO styles + free style customization - Semi-automatic setup, no additional tools required - Environmentally friendly power with low consumption - Up to 600 cartons per hour Additional features: - Custom box design with free style option - Manual adjustment of trim and creasing pressure - 10 sectional slotting blades (each 100 mm) - External control of carton length and precise trimming - Remote diagnosis via secure VPN connection - Compact footprint, vibration-damping feet - Works with FLEXOMAT flexo printer in full size Hnedpfx Aswrrkrokreu Technical data: - Power supply: 3 x 380/415/480 V - Installed power: 4.7 kW - Maximum sheet size: 2500 mm (98") width x 9999 mm (394") length - Minimum box size: 250 mm (10") width x 550 mm (21") - Slot width: ~7-8 mm (~5/16") - Machine weight: ~2200 kg (4850 lbs) CE/UL certified – compliance with industry standards For further information contact us, we are happy to help you.

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Hodpfsv Da Dljx Akronu Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Condition: reconditioned (used), Now in stock at Glendale we have this Morgana Major Folder. This Morgana Major is in perfect working condition having been refurbished by a Morgana trained engineer. It includes a recently replaced new motor and rollers. The sheet count is very low at just 283,000 sheets. This Major folder also includes the perforation and scoring unit. The Morgana Major has been designed to offer a wide range of ‘big machine’ features within a compact and easy to operate design. Changing from one size to another, or for different folds, can be accomplished in seconds. The Morgana Major incorporates counting and batching, with perforating and scoring as standard. A number of unique features have been developed to ensure that the Morgana Major can handle output from digital processes, as well as litho printing. The fold rollers are extremely durable and have the ability to handle a wide variety of stock without adjustment. Not affected by paper dust, their unique composite material will positively grip high gloss papers or work from digital print engines. The Dial-a-Fold plate settings enable all adjustments to be made without removing the covers. An LED display, accurate to 0.1mm, shows the fold plate position and allows easy and accurate repeat job settings. A powerful suction feed handles a wide range of coated or non-coated material and incorporates side lay alignment of the sheets before they enter the fold plates. The feed table also has a suction chamber to control curled or statically charged paper. A larger sheet size of 365mm width and 648mm length makes the Morgana Major even more flexible, capable of producing 6pp A4 documents. The machine speed is fully adjustable from 4500 to 27,500 sheets per hour, giving the operator complete control over the production of a wide range of stocks. The plug-in perforator/scorer is included with this Morgana Major and work is delivered into a catch tray. Key Product Features • Powerful suction feeder handles a wide range of paper weights • Side lay alignment of the sheets, prior to folding • Low pressure suction chamber to control curled paper before it enters the fold rollers Hnjdpfx Aov Hr D Njkrou • Fully enclosed fold plates with ‘dial-a-fold’ and LED display, fitted with anti-static brushes, skew and micro adjustments • Plug in perforating and scoring attachment • Variable speed • Tray to catch work when perforating or scoring • Long delivery belt stacker • Counting & batching • Double sheet, anti jam detector Specifications Manufacturer Morgana Model Major Folder Condition Refurbished Stock Number 114925 Max sheet size 674mm x 365mm Min sheet size 148mm x 140mm (94mm with optional narrow sheet attachment) Max paper weight 240gsm (grain direction depending) Min paper weight 56gsm Feeder capacity 500 sheets 80gsm Feeder Suction Feed Speed 4,500 to 27,000 per hour Perforating & Scoring Attachment included Power requirements 240v 50/60hz Machine weight 120kgs Dimensions (L)1168mm x (W)493mm x (H)990mm

Condition: like new (used), Year of construction: 2020, operating hours: 500 h, Cubixx 120 is the workhorse amongst the semiautomatic multipurpose dicers. ONLY RUN FOR 500 HOURS With its high flexibility and powerful capacity, it handles loose as well as pre-formed products, such as meat, cased products, sausage and cheese. The ideal performer for industrial food processing applications. Fully sealed product loading chamber with open hygiene drainages Lateral pre-pressing and chamber closingby sidewall Product pre-loading chamber Integrated discharge conveyor THC-system* Adjustable blade speed Touchscreen Two-part cutting grid Hardened shear edges and product stabilizers Simple and safe 4-point grid fixation Intelligent automatic slice speed control Hjdpfsxu N Htsx Akrenu

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, total length: 1,500 mm, total width: 900 mm, total height: 1,400 mm, wall material: stainless steel, power: 32 kW (43.51 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 3 months, Tilting brewing kettle, Joni Optimix model, with agitator, 150-liter capacity. The unit has undergone a major overhaul. Hodpfozqyv Djx Akronu

Condition: excellent (used), 488 UŻYWANA Ubijaczka cukiernicza Rego SM 4. EXTERNAL DIMENSIONS (in cm): - W: 70 - L: 70 - H: 171 TECHNICAL DATA: - power: 1,47 kW - power supply: 400V - kettle capacity: approx. 40 L EQUIPMENT: - 5 kettles - 3 whisks Hnodezq Szxepfx Akrsu The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: like new (used), Automatic Onion Slicer – Stainless Steel Industrial automatic onion slicer, designed for continuous and uniform slicing of onions in professional vegetable preparation and processing lines. The equipment incorporates a feeding and transport system that allows onions to be guided in a controlled manner to the cutting area, reducing manual handling and providing a regular flow of processed product. Its construction primarily in stainless steel, longitudinal structure, and protected cutting area make it especially suitable for industrial installations where hygiene, ease of cleaning, and continuous production are required. MAIN FEATURES -Type: Industrial onion slicer -Application: onions -Automatic/continuous operation -Product feeding system -Controlled transport and positioning -Mechanical cutting system -Uniform and repeatable cutting Hnjdpfxjzrglno Akrju -Protected cutting area -Electric motor drive -Construction primarily in stainless steel -Robust industrial structure -Safety guards on moving parts -Design for continuous production -Accessibility for cleaning and maintenance -Integrable into complete onion processing lines PROCESS Pre-prepared onions are fed into the feeding system and automatically transported to the cutting area. The system maintains the product in a controlled position during its advance and performs the cutting using the mechanical elements installed in the machine. Once processed, the onion is continuously discharged to the next stage of production. Depending on the tooling and cutting configuration installed, the equipment can be adapted to different product preparation needs. It can be integrated with: -Hopper and feeding systems -Onion peelers -Inspection belts -Washers -Conveyors and elevators -Subsequent cutting equipment -Cookers and scalding units -IQF freezing tunnels -Weighers and dosing units -Packaging machines APPLICATIONS Especially suitable for onion processors, frozen vegetable manufacturers, canning companies, IV/V range industries, prepared dish producers, and horticultural processing companies. It can be part of an automatic preparation line that includes feeding, peeling, inspection, cutting, washing, heat treatment, freezing, or packaging. Its industrial construction and continuous operation provide a solution for automating onion slicing, increasing product consistency, and reducing manual operations. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Consisting of : “GEA-CFS” former Type VM 600 HSE all stainless steel speed up to ± 50 strokes / min. (Depending on the product, shape, temperature and machine settings) mobile with outfeed conveyor belt width 600 mm surface of the dies 570 x 130 mm suitable for dies with a thickness of min. 6 mm and max. 40 mm power 22,8 kW weight 1.750 kg dimensions (l x w x h) : ± 2.500 x1.300 x 2.200 mm 3x400v 50 Hz mobile Hjdpfx Akozzcqfjrenu new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes) + “Berief” contact cooker Type Dubra DB 8/600 continuous teflon belt grill suitable for thermo oil heated with lower and upper belt - bottom and top grilling belt width 600 mm adjustable speed product height electrically adjustable nett frying length 6.800 mm total length 9.300 mm total width 1.500 mm weight : 5.700 kg + “Kersting” After Heating Tunnel net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyor washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Condition: good (used), 419 USED Pastry beater, confectionery mixer. EXTERNAL DIMENSIONS (in cm): - length: 70, - height: 171, - width: 70. - kettle: 39/34. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... Hnodszd Dk Sopfx Akreu bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Steam-heated 4-vessel brewhouse with stainless steel brewing vessels. The system is suitable for infusion and decoction methods as well as high-gravity brewing and comprises the following components: - Mash tun (Huppmann, 2004) with a capacity of 150 hl, steam-heated, insulated, with a bottom-entry agitator and pre-mash screen - Lauter tun (Huppmann, 2004), insulated, with a drop floor, grist cutter and spent grain discharge screw - First run-off vessel for wort (Steinecker, 2003), insulated tank - Wort kettle (Steinecker ‘Merlin’, 2003), steam-heated, insulated - Wort condenser - Whirlpool, insulated, with hop dosing vessel (manual flap) and top-entry spent grain discharge - Spent grain tank with a capacity of 15 hl, conical - Hop dosing unit with 3 stainless steel vessels and hop chutes on a shared stainless steel frame - Wort cooler (API, 2006), two-stage plate heat exchanger for cooling 180 hl/h of hot wort to fermentation temperature - 3 centrifugal pumps for wort transfer - Various pipework, valves, fittings and sensors Additional title: Brewing system with steam-heated stainless steel vessels; built between 2003 and Cast wort capacity up to: 18000 l ; 15,500–16,000 litres for full beer, 12,000 for bock beer Hnodezizb Sjpfx Akrsu Malt bill: 2500 kg/batch Operation / Control: Simatic S7-400 Material: Stainless steel Features: Mash tun; lauter tun; wort transfer tank; hop dosing; wort kettle (Merlin); whirlpool; spent grain tank; wort cooling; 3 x wort pumps