Used Mz Vm350/Nr2 for sale (178)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZBF03, overall weight: 650 kg, total width: 1,500 mm, total height: 1,500 mm, total length: 1,800 mm, tank capacity: 30 l, compressed air connection: 0.4 bar, transport height: 1,600 mm, transport length: 2,000 mm, transport width: 1,600 mm, Equipment: CE marking, This machine is mainly available to fill nail glue into various round and flat glass and plastic bottleswith the filing range from 5-20ml. High precision cam provides a regular plate to position, inner,brush and cap; accelerating cam makes capping heads going up and down; constant turning armscrews caps, peristaltic pump and pressure tank filling time measures filling volume; and touchscreen controls all action. No bottle no filling and no capping. lf there is no plug in the bottle, itmust not cap until having been detected plug in the bottle. The machine with advantage of highposition. Bsdpfx Amoxunhvozjlk

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZBF04, Equipment: CE marking, This liquid filling machine is a professional integrated machine for filling, capping and sealing vials, glass infusion bottles or similar bottles. It has been developed by our company based on the introduction and absorption of advanced foreign technology. The machine can perform multiple actions simultaneously, including unscrambling bottles, quantitative filling, stoppering (using Butyl Rubber Stoppers), capping and sealing. Blodpfoxunh Nex Amzjk

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MzBs001, Equipment: CE marking, Foam sealing machine, automatic upper and lower cover sealing machine, adopts PLC control,adjusts the tape to the sealing position through the adjustable handle,touches the screen to select the corresponding model and presses the start button to automatically seal the tape. The sealing effect is flat and beautiful, and the sealing is firm. It can be operated by a single machine or matched with an automatic packaging line. Widely used in food, fresh food, cold chain, e-commerce and other industries. Bjdoxu Agmjpfx Amzolk

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: Mzvbf01, Equipment: CE marking, Automatic vial bottle filling machine.this machine type normally customized by the customer vial bottle type and requirement of the production .It widely used for the pharmaceuticals and industry. Filling and Capping: The process involves automatic bottle loading, automatic capping, automatic filling, automatic capping, and bottle discharging, all completed without human contact. Bljdpfox Tg Tqsx Amzek It employs a peristaltic pump for filling and a servo control system; the equipment's transmission is fully servo-controlled. The capping torque is adjustable. The equipment is equipped with a buffer tank and a weighing function (Mettler-Toledo electronic scale) to control the liquid level by weight. It also features a magnetic stirring function. All parts in contact with materials are made of 316L stainless steel, conforming to GMP standards.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: MZsmcs01, type of input current: three-phase, Equipment: CE marking, This machine can be used for sealing round cans, such as aluminum cans, easy to pull cans, iron cans, plastic cans, paper cans, etc. Bjdpfx Aex Ancijmzolk

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZTF01, Equipment: CE marking, The fully automatic tube filling and sealing machine is a highly automated device for filling and sealing cylindrical metal tubes or composite tubes with paste materials. It adopts SS304 piston pump to fill the paste materials driven my servo motor, that meets GMP standards, and high accurate in filling. It uses PLC programmable control and a photoelectric identification mechanism for accurate and reliable trademark positioning; it uses frequency conversion speed regulation, a composite opening mechanism for indexing and positioning, and is equipped with the latest international folding and sealing mechanism.Widely used in cosmetic, chemical, adhesive and food industries. Bledexum Alopfx Amzek

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZBF-003, total width: 1,050 mm, total length: 800 mm, total height: 1,500 mm, empty load weight: 80 kg, space requirement width: 1,100 mm, space requirement length: 1,000 mm, space requirement height: 16,000 mm, Equipment: CE marking, Semi-automatic bag-in-box filling machine is specially designed for bag-in-box filling,Adopt plunger pump to measure filling with high filling precision. And easy to adjust filling volumes. It is widely used for filling wine, juice, milk, water, and other beverage. 1). The machine is mainly made of quality stainless steel; the parts contact the material is made of 304# stainless steel and food grade plastic tubes and comply with hygienic standards for food; 2).It can fullfill accurate filling and capping at one operating position. 3). The machine uses flow meter for filling which is with high filling precise. Bjdpfexv Rqiox Amzolk 4). All its pneumatic and electric parts are from world famouse brand which are good quality. 5). can achieve vacuum pumping before they are filled, thereby helping extend the shelf life of the product.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MZBF02, Equipment: Android Auto, CE marking, The production line can widely used to filling,capping and labeling for various semi-liquid,ointment paste, dense catsup and various materials with granule, such as drinks with fruit, honey,syrup,jam, peanut butter, sesame paste,tomato sauce, peper sauce, etc.Operating principle By the reciprocating motion of the pistons in the material cylinders of the Filling Machine, negative pressure produces in the front chamber of the cylinder so that material could be pumped. The stroke of the cylinder is controlled by a signal valve so as to adjust filing amount and to achieve accurate filling results.Property The Filling Machine with extra functions is designed and manufactured by our factory with reference to the same kind of foreign machines. Bledpfxexuncte Amzok

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZRLM01, overall weight: 500 kg, total length: 1,750 mm, total width: 800 mm, total height: 1,450 mm, space requirement length: 2,000 mm, space requirement width: 1,000 mm, space requirement height: 2,000 mm, power: 1.2 kW (1.63 HP), fuel type: electric, Equipment: CE marking, The Automatic Labeling Machine is a sophisticated piece of equipment used in various industries for applying labels to products, containers, packages, or other items. These machines are designed to enhance productivity, accuracy, and efficiency in the labeling process. Bledpfsxum H Djx Amzek

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MzCBP01, overall weight: 1,500 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,900 mm, space requirement length: 3,800 mm, space requirement width: 1,200 mm, space requirement height: 2,000 mm, power: 1.5 kW (2.04 HP), fuel type: electric, fuel consumption per hour: 20 l/h, operating pressure: 1 bar, pressure (max.): 0.6 bar, type of cooling: air, Equipment: CE marking, Automatic cartoning machine is suitable for pharmaceuticals, food, cosmetics, commodities etc.It can open box, fill products into box, then close box with tuck-in or hot-melt sealing. The machine is equipped with a series of sensors and automatic protective devices to assure the machine runs safely and effectively. It can connect with the Blister Machine, Pillow Packaging Machine, Shrink-Wrapper, etc., to form a Packaging Line. It is the best choice for mass production. Bodpfx Amjxu Aamjzolk

Condition: used, Year of construction: 1998, operating hours: 60,931 h, machine/vehicle number: 330_030901, Used Star SR-32 Year: 1998 Operating hours: 60,931 Serial no.: 330_030901 Internal no.: 231025 Control: CNC Fanuc 18i Tb Maximum machining diameter: 32 mm Maximum workpiece length: 125 mm Headstock travel: 310 mm C-axis: 1° Number of axes: 7 Drilling capacity (fixed tool): 13 mm Drilling capacity (rotating tool): 8 mm Tapping: M12 (with driven tool M6) Milling capacity: Ø10 mm Spindle speeds: 350 – 7,000 rpm (for driven and plain tools) Coolant: Oil CE declaration of conformity Operating and maintenance manuals Operating tools Note from seller: Fanuc transverse drive system is defective and has been deactivated by Star Micronics. Machine dimensions: approx. 1,700 x 2,512 x 1,700 mm Machine weight: approx. 2,900 kg Blodpfszimw Sox Amzjk Includes: • Bar feeder FMB TURBO 5-42 (bar capacity: 5–42 mm, attachment variant "A") • Hinged belt conveyor MAYFRAN • Kraft & Bauer extinguishing system with 10 kg CO₂ extinguishing agent tank Loading magazine dimensions: approx. 4,500 x 1,000 x 1,800 mm Loading magazine weight: approx. 1,800 kg Peripheral equipment & accessories dimensions: approx. 1,900 x 700 x 800 mm Peripheral equipment & accessories weight: approx. 200 kg The machine can be inspected under power by appointment. Technical data and information are subject to change and error. Prior sale reserved!

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. Bodpfxeh Agnus Amzelk b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: used, This listing is for the Malvern CHR6000 + CHR7100 OMNISEC RESOLVE and REVEAL GPC/SEC These units are in full working condition and ready for immediate use What the System Measures The combined OMNISEC RESOLVE and REVEAL GPC/SEC System provides absolute molecular weight, intrinsic viscosity, concentration, and conformational data in a single run. This eliminates the need for calibration standards, improving accuracy and confidence in results. OMNISEC RESOLVE – The Chromatography Module OMNISEC RESOLVE integrates four key components into a single unit: Pump: Delivers a flow rate range of 0.01–10 mL/min with low pulsation (0.15% at 1 mL/min in water), ensuring stable baseline signals. Degasser: Features a low-volume (960 µL) design for rapid solvent exchange, enhancing system productivity. Autosampler: Accommodates up to 192 samples, with temperature control from 4°C to 60°C, suitable for both vials and 96-well microtiter plates. Column Oven: Controls temperatures up to 65°C, supporting up to six analytical columns for optimal separation conditions. This integrated design minimizes baseline noise and enhances measurement sensitivity, particularly for low-concentration or low-molecular-weight samples. OMNISEC REVEAL – The Detector Module OMNISEC REVEAL is an advanced, fully integrated, temperature-controlled multi-detector module that includes: Refractive Index (RI) Detector: Highly sensitive and stable, enabling accurate concentration measurement, even for low-concentration samples. UV/Vis Photodiode Array (UV-PDA) Detector: Measures absorbance at any wavelength from 190 to 900 nm, providing versatile detection options. Light Scattering Detectors (LALS & RALS): Deliver market-leading sensitivity, allowing measurement of molecular weights as low as 200 g/mol and injection masses as low as 100 ng, for highly reliable results. Viscometer: Features automated balancing for precise intrinsic viscosity measurements, with a user-exchangeable capillary bridge to minimize maintenance. The fully temperature-controlled design improves detector stability and overall sample characterization, ensuring optimal performance for sensitive applications. OMNISEC Software The OMNISEC software suite provides: Unified instrument control, data acquisition, and analysis. Calculations for molecular weight (Mn, Mw, Mz), polydispersity, radius of gyration (Rg), intrinsic viscosity, and Mark-Houwink parameters. Support for automated, unattended operation to streamline workflows. Key Advantages Exceptional Sensitivity: Measures molecular weights down to 200 g/mol and injection masses as low as 100 ng. Blodpfx Amoychy Aszjk Broad Wavelength UV/Vis Detection: Enables absorbance measurements across 190–900 nm. Superior Stability: Temperature-controlled detectors ensure consistent, high-quality results. Versatility: Ideal for polymers, polysaccharides, and proteins, with multi-detection SEC offering unmatched characterization detail. Integrated Design: Reduced inter-detector volume improves peak resolution and data quality. Accurate Viscosity Measurement: With automated viscometer balancing, ensuring reproducibility.

Condition: good (used), Year of construction: 2003, For sale: BOGE S100 screw compressor (2 units available) Nr1. Total operating time: 24,581 h Year of manufacture: 2003 Main motor power: 75 kW Cooling fan motor power: 2.20 kW Supply voltage: 400 V / 50 Hz Bedpfxsy Hqyzo Amzelk Operating pressure: 8 bar Capacity: 12.10 m³/min Dimensions (W×D×H): 1995 × 1065 × 1949 mm Weight: ~1358 kg Last service carried out on 20.10.2023 at 23,327 h. Price: €4,950 Nr2. Total operating time: 40,058 h Year of manufacture: 1999 Main motor power: 75 kW Cooling fan motor power: 2.20 kW Supply voltage: 400 V / 50 Hz Operating pressure: 8 bar Capacity: 12.10 m³/min Dimensions (W×D×H): 1995 × 1065 × 1949 mm Weight: ~1358 kg New cooler installed in 2015. Last service carried out on 20.10.2023 at 39,179 h. Price: €3,900 TAG: screw compressor, industrial compressor, compressed air, compressed air system, electric compressor, stationary compressor, BOGE, Atlas Copco, Kaeser, Ingersoll Rand, CompAir, Gardner Denver, Quincy, Chicago Pneumatic

Condition: good (used), Year of construction: 2014, Measuring machine, measuring and marking machine, coordinate measuring machine, coordinate measuring machine, form tester, clamping plate, marking and marking plate, measuring plate, measuring table, welding table, welding table, surface plate Bljdpfxow Hqx Ds Amzok -Manufacturer: Stiefelmayer Type C-System -Digital display: Stiefelmayer type MZ 2000 -Travel paths: X 2450 mm, Y 1215 mm, Z 1645 mm -with: 6x adjustable feet -Accessories: see photos -Measuring plate: 2000/3000/H355 mm -Dimensions: 2540/3000/H2630 mm -Weight: 4660 kg

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: Blodewhdnhjpfx Amzok The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER Measuring and marking plate made of cast steel/grey cast iron, heavily ribbed High-precision measuring plate with quality surface finish Year of manufacture: 1985 Length: 2000 mm Width: 1500 mm Thickness: 350 mm Plate thickness (top): 50 mm solid material with 300 mm ribs Working height: approx. 800 mm Blodpfopwpxcsx Amzsk - with manually movable measuring arm, measuring range X=1490 mm, Y=1000 mm, Z=1250 mm - with 3-axis digital readout Grundig MZ 1030 - machined side surface at 90° angle to the table top, 2000 x 350 mm - 5 height-adjustable feet Required space (L x W x H): 2000 x 1500 x 2500 mm Weight: approx. 2600 kg In good condition

Condition: used, Year of construction: 1983, machine/vehicle number: 16340283, table length:2000 mm table width:1000 mm weight of the machine ca.:2,9 t Bsdocxxziopfx Amzolk Novalyth stone table with integrated T-groove, Grundig MZ 1030 measuring computer, 5 height-adjustable feet.

Condition: excellent (used), Year of construction: 2017, Brandt KDF 1440 Edition Only 1700 operating hours – in very good condition – can also be supplied with a preheating station. XES 200 autonomous unit (+ €4500) available. SUMMARY OF MACHINE EQUIPMENT: JOINTER HEAD 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 N SAWING UNIT BEVEL/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT FOR SAWING BEVEL/STRAIGHT MULTI-STAGE MILLING HEAD MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT SHAPED MILLING HEAD 1 X 0.35 KW WD 60; also for structural flooring PNEUMATIC 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER HEAD MZ 40 GLUE JOINT SCRAPER EDGE TRIMMING UNIT Overpressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spray unit for workpiece Automatic edge infeed Multi-roller scanning for multi-stage milling head MS 40 + multi-stage scraper MZ 40 Cleaning agent spray unit WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 8-22 mm ¦ 70 mm* – For workpiece thickness 23-40 mm ¦ 120 mm* – For workpiece thickness 41-60 mm ¦ 150 mm* *Depending on workpiece length – Workpiece overhang ¦ 38 mm – Workpiece thickness ¦ 8 – 60 mm – Edge height max. = workpiece height ¦ + 6 mm – Edge material, roll ¦ 0.4 – 3 mm Bsdjzb Iggspfx Amzslk – Edge cross-section max. – For PVC ¦ 135 mm² – For veneer ¦ 100 mm² – Roller diameter max. ¦ 830 mm – Edge material, strip ¦ 0.4 – 8 mm – Edge cross-section max. – For strips ¦ 360 mm² – Feed rate ¦ 8 – 14 m/min – Max. feed rate with shaped milling head ¦ 11 m/min – Working height ¦ 950 mm – Pneumatic connection ¦ min. 6 bar – Overall length ¦ 5,573 mm Complete description: see PDF

Condition: used, mileage: 1,355,000 km, power: 355 kW (482.67 HP), first registration: 11/2018, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,600 mm, Year of construction: 2018, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Information in English: DAF XF 480 FAR SSC EURO 6 6X2 TOP CONDITION NL TRUCK Box: Cool / Freeze / Flowers Frigo Martini Ebo Rhoon 2018 Lift: 2,000 kg Dhollandia 2018 Refrigeration: TRS Carrier Iceland, temperatures from -30 to +30 degrees First registration: 03/2018 APK: 03/2026 (NEW) Mileage: 1,355,000 km Engine Power: 353 kW (480 HP) Transmission: Automatic Dimensions (lxbxh): 815 x 250 x 275 cm (internal) Own weight: 13,940 kg Loading capacity: 14,060 kg GVW: 28,000 kg GCW: 50,000 kg Colour: White, Original colour (H3279 Brilliant White) Suspension: Front leaf, axles 2 and 3 air Emission class: Euro 5 Axle configuration: 6X2 Tyres front: 385/65 R22.5 L50% R50% Tyres axle 2: 295/80R22.5 L80% R80% Tyres axle 3: 385/65 R22.5 L40% R40% Cabin type: Super Space Cab Extras: Automatic transmission, MX Engine Brake, Parking Air Conditioning, Parking heater, Refrigeration, Camera, Cruise control, 2 beds, Radio/CD player, TRS Carrier Iceland Refrigeration, Temperatures controlled between -30 and +30 degrees Celsius, 1,500-liter diesel tanks complete with Dutch, German, and Italian Certificates, Fully insulated box built in 2017, Robust and in perfect condition, 5x Stainless steel load lock rails in floor and ceiling including 5 bars, 1x horizontal load lock rail, Many extra lights, Fully Pneumatic Rockinger Trailer coupling, Lift axle, ABS, EBS, Complete service history available, Comes directly from first owner, Directly available and ready for work, Box is large enough for 26 CC (Danish Trolleys), 16 normal pallets or 20 Euro pallets, etc. TOP CONDITION NL TRUCK MAINLY USED FOR LONG DISTANCE TRANSPORT VERY WELL MAINTAINED MULTIPLE UNITS IN STOCK CAN BE SUPPLIED WITH: DRACO FRIGO TRAILER COOL FREEZE FLOWERS Box: Cool / Freeze / Flowers Frigo Martini Ebo Rhoon Make and type chassis: Draco MZS 218 Refrigeration: TRS Carrier Iceland First registration: APK: 2026 FRC ATP: - Inside dimensions (lxbxh): 750 x 250 x 290 cm (internal) Drawbars adjustable length: 40 cm Empty weight: 6.0 kg Loading capacity: 11,960 kg GVW: 18,000 kg Lift: Dhollandia 2,000 kg lift. Year of manufacture 2021!! Suspension: Air suspension Axles: SAF axles with disc brakes Tyre size: 445/45 R19.5 Tyre profile axle 1: L30%, R30% Tyre profile axle 2: L30% R30% Spare tyre trailer 445/45 30% Extras: Adjustable draw bar in length (40 cm), Dhollandia 2,000 kg lift (Renewed in 2021!!), ABS, EBS, SAF axles with disc brakes, 2 Toolboxes, Fully insulated box built by Martini, 5x stainless steel rails in floor and ceiling, 1x horizontal load lock rail, FrigoBlock Refrigeration (Runs on 380V or on the refrigeration of the truck), Extra lights, rear doors, rear bumper, Ferry connections, 2x spare tyres, Complete service history available, Directly available and ready for work, Box is large enough for 24 CC (Danish Trolleys), 14 normal pallets or 38 Euro pallets, etc. Refrigeration unit brand: Carrier Further information: * Payload: 14,520 kg * Maximum axle load | First axle: 9,000 kg * Maximum axle load | Second axle: 11,500 kg * Maximum axle load | Third axle: 7,500 kg * Wheelbase: 645 cm * Lift axle | Third axle: Yes * Driven | Second axle: Yes * Position | First axle: Front * Position | Second axle: Rear * Position | Third axle: Rear Bjdpfx Amsynxawozolk Further equipment: * 9-ton front axle * 27 MC / CB * Aluminium fuel tank * Anti-lock braking system * Automatic air conditioning * ...

Condition: used, Year of construction: 2008, operating hours: 23,600 h, functionality: fully functional, machine/vehicle number: 632025, TSCHUDIN T35 – CNC High-Precision Cylindrical Grinding Machine with Siemens Sinumerik 840D Year of manufacture: 2008 · Machine No.: 632025 · Approx. 23,600 spindle hours · Incl. SECKLER production cell, STREULI filtration system, DITTEL unbalance measuring device Bedpfoy Eqiqex Amzslk TECHNICAL DATA • Manufacturer: HTT KELLENBERGER (now Hardinge / L. Kellenberger & Co. AG) • Model: Tschudin T35 / Siemens • Machine No.: 632025 (original nameplate) • Circuit diagram: E-632025 • Year: 2008 • Control: Siemens Sinumerik 840D with grinding software • Travel paths: Z 600 mm / X 350 mm • Supply voltage: 3 × 400 VAC, 50 Hz • Control voltage: 24 VDC • Connected load: 16 kVA • Weight: approx. 6,400 kg • Spindle operating time (machine ON): approx. 23,600 h • Centre distance (machine class): up to 400 mm • Centre height: 175 mm • Max. workpiece weight: 150 kg • Grinding wheel diameter: 400 – 600 mm • Guideways: Hydrostatic • Max. cutting speed: up to 120 m/s (ball bearing variant) INTEGRATED AUTOMATION & AUXILIARY SYSTEMS • SECKLER robot magazine – autonomous production cell (robot loading, workpiece magazine, sorting conveyors for good / SPC / scrap parts) • DITTEL M5000 unbalance measuring device • STREULI filtration system MZ 150 (year 2005, fine filtration) CONDITION & HIGHLIGHTS Used machine, fully functional • Siemens Sinumerik 840D with grinding software • Hydrostatic guideways – precision class • Autonomous SECKLER production cell • Integrated DITTEL M5000 unbalance measuring device • STREULI MZ 150 coolant filtration system • Regular maintenance documented by Johnson Controls (last in 2024, next due 04/2025) • Removed from ongoing serial production at a precision parts manufacturer ABOUT THE MACHINE The Tschudin T35 is a modular production external cylindrical grinding machine for medium and large series. Originally developed by Swiss company HTT Hauser Tripet Tschudin AG, now under the Kellenberger/Hardinge Group. The offered machine was operated in conjunction with a complete SECKLER production cell – fully automated 24/7 operation is possible. The Siemens Sinumerik 840D control system features grinding software developed by grinding specialists and allows optimal programming of grinding and dressing processes. The hydrostatic guideways guarantee highest precision in series production; the ball bearing variant allows cutting speeds up to 120 m/s. SCOPE OF DELIVERY • Tschudin T35 base machine with Siemens Sinumerik 840D • Complete SECKLER automation cell (incl. control cabinet) • DITTEL M5000 unbalance measuring device • STREULI MZ 150 coolant filtration system (year 2005) • Existing grinding wheel flanges LOCATION & TRANSPORT Location: Central warehouse, Köck Auction House, 6178 Unterperfuss, Austria. Inspection prior to purchase strongly recommended. All information without guarantee. Auction content is solely the described item. Used machine – sale excludes any warranty. Errors and typographical mistakes excepted.

Condition: used, mileage: 893,000 km, power: 368 kW (500.34 HP), first registration: 06/2022, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,990 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2022, Equipment: ABS, air conditioning, navigation system, soot filter, tail-lift, Information in English: SCANIA 500S 6X2 CARRIER TRS ICELAND 815 x 250 x 275 CM INTERNAL TAIL LIFT Box: Refrigerated / Freezer / Flower Frigo Martini Ebo Rhoon 2022 Tail lift: 2,000 kg Dhollandia Refrigeration: TRS Carrier Iceland, temperature range from -25°C to +30°C First registration: 06/2022 APK (MOT): 06/2026 Mileage: 893,000 km Engine Power: 358 kW (500 HP) Transmission: Automatic Internal dimensions (L x W x H): 815 x 250 x 275 cm Kerb weight: 13,765 kg Payload: 14,235 kg GVW: 28,000 kg GCW: 50,000 kg Colour: White, original paint Suspension: Front leaf springs, axles 2 and 3 with air suspension Emission standard: Euro 6 Axle configuration: 6x2 Tyres front: 385/65 R22.5 L50% R50% Tyres axle 2: 295/80 R22.5 L50% R50% Tyres axle 3: 385/65 R22.5 L50% R50% Cab type: S Highline Features: RETARDER, automatic transmission, parking heater, refrigeration, adaptive cruise control, 2 beds, radio/CD player, TRS Carrier Iceland fridge with temperature control between -30°C and +30°C, 1,490-litre diesel tank, fully insulated body built in 2022, 5 stainless steel load lock rails integrated into floor and ceiling including 5 bars, 1 horizontal load lock rail, extensive extra lighting, fully pneumatic Rockinger trailer coupling, lifting axle, ABS, EBS, complete service history, direct from first owner, immediately available, ready for operation, box volume suitable for 26 CC (Danish trolleys), 16 standard pallets or 20 Euro pallets, etc. Optionally available with matching trailer: 2-AXLE DRACO FRIGO TRAILER CARRIER TRS ICELAND 24 CC TAIL LIFT (2021) Box: Refrigerated / Freezer / Flower Frigo Martini Ebo Rhoon Chassis: Draco MZS 218 Blsdpfx Aoyqivujmzok Refrigeration: Carrier TRS Iceland First registration: - APK (MOT): until 2026 FRC ATP: No Internal dimensions (L x W x H): 750 x 250 x 290 cm Adjustable drawbar length: 40 cm Unladen weight: 6,040 kg Payload: 11,960 kg GVW: 18,000 kg Tail lift: Dhollandia 2,000 kg Suspension: Air suspension Axles: SAF axles with disc brakes Tyre size: 445/45 R19.5 Tyre profile axle 1: L40% R40% Tyre profile axle 2: L40% R40% Spare wheel: trailer 445/45 30% Features: Length-adjustable drawbar (40 cm), Carrier TRS Iceland refrigeration, Dhollandia 2,000 kg tail lift, ABS, EBS, SAF disc brake axles, 2 toolboxes, fully insulated body by Martini, 5 stainless steel load lock rails in floor and ceiling, 1 horizontal load lock rail, rear doors, rear bumper, ferry connections, 2 spare wheels, complete service history, immediately available and ready for use, box size allows for 24 CC (Danish trolleys), 14 standard pallets or 18 Euro pallets, etc. TOP CONDITION COMBINATION, IMMEDIATELY READY FOR WORK 3 SCANIAS AND 2 DAFS READY FOR DELIVERY ADDITIONAL TRAILERS AVAILABLE, ALL TO ABOVE SPECIFICATIONS, ONLY DIFFERENT MODEL YEARS: - 2017 - 2018 - 2019 - 2020 - 2021 - 2022 PLEASE CONTACT OUR SALES DEPARTMENT FOR MORE DETAILS Further information: * Payload: 14,235 kg * Tyre size | First axle: 385/65 R22.5 * Tyre tread depth inner left | First axle: 50% * Tyre tread depth inner right | First axle: 50% * Max axle load | First axle: 9,000 kg * Tyre size | Second axle: 295/80 R22.5 * Tyre size | Third axle: 385/65 R22.5 * Tyre tread depth outer left | Second axle: 50% * Tyre tread depth inner left | Second axle: 50% * Tyre tread depth inner left | Third axle: 50% * Tyre tread depth outer right | Second axle: 50%

Condition: ready for operation (used), * Nr1: Brand= LKOREMAN, year of manufacture 2010 * A-A length: 1000 mm * Beltwidth: 1000 mm * Power : 0,2 kW Drum motor * Beltspeed: 0,4 m/s. * Nr2: Brand= LKOREMAN, year of manufacture 2001 * Curve conveyor: 20° * Beltwidth: 700 mm Blsdpfeywl Unjx Amzek * Power: 0,37 kW gearbox * Beltspeed: 0,2 m/s.

Condition: good (used), Year of construction: 2022, operating hours: 6,099 h, functionality: fully functional, machine/vehicle number: 6500014216, cutting range round steel at 90°: 240 mm, cutting range round steel at 45°: 240 mm, cutting range angle steel at 90° (X-axis): 180 mm, cutting range angle steel at 90° (Y-axis): 180 mm, cutting range angle steel at 45° (X-axis): 180 mm, cutting range angle steel at 45° (Y-axis): 180 mm, type of input current: three-phase, total length: 14,000 mm, cutting range square steel at 90°: 180 mm, cutting range square steel at 45°: 180 mm, feed length Y-axis: 7,500 mm, product height (max.): 12 mm, Tube laser Bodor T230-650CE 4K laser power: 4kW for tubes and profiles 7500mm length × 20-240mm diameter round Bledpfxevvlbto Amzek 7500mm length × 20mm-180mm square automatic loading 3000-6200 Laser head 2½D Selling due to purchase of 3D You can always come and see this machine running.

Condition: used, functionality: unexamined, machine/vehicle number: TSH 065 D, Used Pfeiffer TSH 065D with Mass Spectrometer. Complete set! Turbo pump: Pfeiffer TSH 065 D (Controller Pfeiffer TCP 015) Diaphragm pump: Vacuubrand MZ 2 NT Mass Spectrometer: Balzers QME 064 + Partial Pressure Gauge Blsdpfow H Np Isx Amzek Printer: Philips PM8222 recorder Complete with many vacuum components.