Used Num Monitor for sale (5,431)

Condition: used, Year of construction: 2000, 2000 Danobat Danumeric NA - 750 CNC Lathe Danobat Danumeric NA - 750 CNC Lathe max swing 700mm, X/Y 255/520mm, tailstock, 12-Pos-Tool-Turret, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 12to, Origin France, Location : 900 avenue de Paris, Billy Berclau, FRA-NA 62138 Lhsdpfxezfqb Hs Ammoh

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm Lodpjy Sub Hsfx Ammjhh • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: used, Year of construction: 2015, CNC machining center Manufacturer: Chiron Type: FZ 12 W Magnum Year of construction: 2015 CNC control: Siemens 840D solution line Travel distances: X/Y/Z = 550 x 400 x 360 mm Spindle: 15,000 rpm Tool holder: HSK63 Internal coolant supply Rotary table Integrated workpiece changer 32-tool capacity Glass scales Lhodpjzfppcsfx Ammsh Chip conveyor Laser control for break detection 23626

Condition: good (used), Steady rest COLCHESTER Magnum Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lhodpfszcnw Iox Ammsh

Condition: good (used), turning length: 5,038 mm, spindle motor power: 80,000 W, spindle bore: 122 mm, travel distance X-axis: 490 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 5,038 mm, total height: 3,300 mm, total length: 16,000 mm, total width: 4,900 mm, overall weight: 30,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/5000 MACH-ID 9642 Make: HEYLIGENSTAEDT Type: Heynumat 35/5000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Z-Axis: +180 to -5038mm Spindle bore: 122mm Lhsdpfx Amjzcmzxsmeh Speedrange: 2200Rpm Spindle power: 80kW B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Length: 16000mm Width: 4900mm Height: 3300mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2002, turning length: 6,000 mm, spindle bore: 122 mm, travel distance X-axis: 90 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 6,110 mm, rotational speed (max.): 2,200 rpm, total height: 3,300 mm, total length: 16,000 mm, total width: 5,300 mm, overall weight: 32,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/6000 MACH-ID 9643 Make: HEYLIGENSTAEDT Type: Heynumat 35/6000 Control: SIEMENS 840D Lhjdpfx Amezclqlomjh Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Z-Axis: -180 to +6110mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW ATC / revolver: 100 B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Length: 16000mm Width: 5300mm Height: 3300mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Engine cable SE-17m for Sinumerik 840D, unused, in original packaging, 100% functional, scope of delivery as shown in the photos. Lhjdpoi D I Tmefx Ammeh

Condition: ready for operation (used), Siemens 6FX1190-3AA00 SINUMERIK MS250 E Stand 00 SN:250272, used, normal signs of use, 100% functional, scope of delivery as per photos Ljdpfxexagrqs Ammohh

Condition: ready for operation (used), Siemens 6FX1190-7AA00 SINUMERIK MS250 A E Stand 2 SN:SN:250458, used, normal signs of use, 100% functional, scope of delivery as per photos Ljdpfxjxagrws Ammshh

Condition: ready for operation (used), Motorola M68VECPU CPU - board Serial number: G662, used, in good condition, 100% functional, scope of delivery as per photos. Ledpfxex Et Nij Ammshh

Condition: ready for operation (used), Siemens SINUMERIK 6FX1118-8AD01 / 548 025.9004.01 machine control panel 3 T with key, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ljdsx Eu Rbspfx Ammshh

Condition: ready for operation (used), Siemens 6FC5112-0CA01-0AA0 Sinumerik Interface Module E, version C, used, 100% functional. Lhedpoi Edyhsfx Ammoh

Condition: ready for operation (used), Siemens 6FX1122-2AA02 Sinumerik PLC interface module, type E, used, 100% functional. Ljdpfx Amsi Ed Rremohh

Condition: new, R. & S. Keller control panel for Sinumerik 820 T, unused, 100% functional. Lhjdpoi Ecl Iefx Ammoh

Condition: ready for operation (used), Fanuc A06B-1501-B102 spindle motor, serial number: C039J0970, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lhjdpex Dt Srsfx Ammsh

Condition: ready for operation (used), Siemens Sinumerik 6FC5147-0AA14-0AA2 flat operator panel without power supply, used, in good condition, 100% functional, scope of delivery as per photos Lhsdpfxsx Eu N Ro Ammjh

Condition: ready for operation (used), Siemens Sinumerik 840D 6FC5203-0AB11-0AA0 operator panel OP 031, 9.5" LCD, color, DC 24V~ E-release: Version G, SN: T-J31113855, used, in good condition, fully functional, scope of delivery as shown in the pictures. Lhjdpfxsx Eu Rhj Ammsh

Condition: ready for operation (used), Tsoubis Electronic replacement monitor for LCD12L-CACS-KR-FANUC without cable, serial number: 1280, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lhedpfx Ajx Evawjmmsh

Condition: ready for operation (used), Siemens 6FX1144-2BA00 Sinumerik interface E, version B, SN 587, used, in good condition, 100% functional Lhodpfxjxagqys Ammeh

Condition: ready for operation (used), Siemens control panel Sinumerik 8 MS421-D, used, normal signs of use, 100% functional, scope of delivery as per photos. Ledpfxexahlre Ammjhh

Condition: ready for operation (used), Siemens SINUMERIK 840D/DE NCU 572.2 6FC5357-0BB21-0AE0 SN: ST-M82029648, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos Lodpfjxahtvox Ammjhh

Condition: new, Siemens Sinumerik 840D NCU 571, in original packaging with opened seal, E-version as shown in the photo, 100% functional Lodpfx Aoxahuajmmjhh

Condition: ready for operation (used), Siemens 6FC3641-0AX SINUMERIK PRIMO SG complete control unit SN:A1495045, used, normal signs of use, 100% functional, scope of delivery as per photos Lhsdpsn Emz Ijfx Ammoh

Condition: ready for operation (used), Siemens 6FX1114-5AA00 Sinumerik 8 interface for external PLC S5, version D, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Lhedpfx Asi Ed Nmemmjh

Condition: new, Siemens 6FX1120-3BC01 Sinumerik module board, version F, , 100% functional. Ljdpfxsi Ed N Ao Ammohh