Used Palletracking 3.6M Extension Bay for sale (5,546)

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 6,500 h, machine/vehicle number: S40-5934, load capacity: 227 kg, lifting height: 15,700 mm, fuel type: diesel, Equipment: all wheel drive, Genie S45 Telescopic Boom Lift Top maintained – extensive repairs – ready for immediate use For sale is a Genie S45 telescopic boom lift in very good technical condition. The boom lift has undergone extensive refurbishment and regular maintenance in the last two years. All invoices are available and can be viewed during inspection. Technical data • Manufacturer: Genie • Model: S45 • Year of manufacture: 2001 • Operating hours: approx. 6,500 h • Working height: 15.7 m • Platform height: 13.7 m • Lateral reach: 9.65 m • Load capacity: 227 kg • Drive: Diesel • Four-wheel drive • Serial number: S40-5934 Extensive investments: In 2023, the engine underwent extensive overhaul (invoice for €9,013 gross): • Engine completely serviced • Connecting rod and crankshaft bearings replaced • Piston rings replaced • Cylinder head gasket replaced • Starter replaced • Oil, air, and diesel filters replaced • V-belt replaced • Numerous other wear parts replaced In 2024, further extensive maintenance and hydraulic work was carried out (invoice for €5,254 gross): • Swing drive motor replaced • Hydraulic pump sealed • Hydraulic hoses replaced • Hydraulic oil replaced • Engine oil and all filters replaced • Machine completely lubricated • Functional test performed • Safety inspection performed Condition Kdedpozrgmrefx Ai Ror • Technically fully functional • Ready for immediate use • Normal age-related signs of wear • No known defects • Inspection and test operation possible at any time by appointment. In 2023 and 2024, over €14,000 was invested in the machine. As a result, the boom lift is in significantly better technical condition than many comparable machines of this year of manufacture. Price: €13,900 net negotiable (16,680 € gross) Location: Laakirchen (Upper Austria)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 135 kVA, controller manufacturer: Heidenhain, controller model: TNC640i HSCI, workpiece diameter (max.): 1,500 mm, workpiece weight (max.): 3,000 kg, rotary table diameter: 1,200 mm, overall weight: 37,000 kg, spindle speed (min.): 1,200 rpm, coolant supply: 70 bar, spindle motor power: 7,800 W, spindle nose: BT50/Capto CS, number of spindles: 2, number of slots in tool magazine: 80, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Ibarmia ZVH60/L6000 is a versatile multi-process machining centre designed for precision milling and turning operations. Equipped with a Heidenhain TNC640i HSCI control system and HR-520 portable hand-wheel, it offers exceptional control and accuracy, further enhanced by Heidenhain Kinematics Opt calibration of rotating axes. This machine features a powerful CAPTO CS main spindle with through-spindle coolant at 70 bar, a generous 80-position tool magazine, and support for BT50/CAPTO tooling. Its horizontal rotary table and turning spindle head deliver up to 78 kW and 1400 Nm, with a 500 mm centre height, while the off-centred Y-axis rotary table allows increased swing for 5-axis operations up to Ø1200 mm. Additional highlights include an automatic self-centring 3-jaw chuck (Ø630 mm), 110 mm bar capacity, hydraulic extension for automated operation, manual tailstock, and sub-plate for tailstock. Precision is assured with RENISHAW RMP600 and TS27R touch probes, while gear hobbing, gear skiving, and grinding with HSKA100 are also supported.For ease of use and maintenance, the machine comes with air and spray guns, mist filtration, a tipping swarf bin, steady rest support, dressing unit, operator platform, and safety door modifications—making it a complete solution for demanding machining tasks. Full Tec spec available upon request Kdedpfjzdix Uox Ai Ror

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A80722MM2, grinding width: 1,350 mm, power: 31 kW (42.15 HP), height adjustment type: electric, Automatic calibrating wide belt sander suitable for fine sanding of solid wood. This sander belongs to the top range of automatic wide belt sanders and stands out due to its compact size, perfect sanding quality, ease of operation, and high reliability. It was used for final sanding of solid wood flooring. 2 main units: soft sanding rollers, 1350 mm rollers Additional units: Scotch-Brite brush, cleaning brush, cleaning air blowers Kdjdpfjy Idxyex Ai Rjr Total maximum power consumption: 31 kW Sanding width: 1350 mm Max. workpiece height: 160 mm Constant working height of the machine – suitable for integration into a production line Motorized adjustment of working thickness with LCD display Continuous speed control of the feed belt Continuous speed control of both working units Pneumatic air blowers for the working units Ammeter for monitoring motor load Remote switching off of units from the control panel Stop with 4 positions for compensating belt grit Feed belt is perforated with the option of vacuuming the parts Roller extension of the table at the inlet and outlet Pneumatic oscillation controlled electronically CE safety standard Weight: 3800 kg Year of manufacture: 2008 Damage to the first sanding roller – see photo Negotiable price: 28,000 EUR excluding VAT The machine is fully functional and sold as is. In stock in Telnice near Brno - Czech Republic Machine testing, demonstration, and operator training are, of course, available.

Condition: good (used), Technical specifications for the shelf rack: Rack system: SSI Schäfer Type: R 3000 Technical data for assembly: Number of rack rows: 01 unit Rack length: 3,290 mm Number of bays per rack row: 02 units Scope of delivery includes: 03x shelf rack uprights, used Kjdpfx Aiey D Hh Nj Rsdr Finish: sendzimir galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / unit: approx. 8.92 kg Including cross brace and base plates (uprights are pre-assembled) 2,490 mm high 600 mm deep 12x shelves, used Finish: sendzimir galvanized For upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / unit: approx. 8.12 kg Max. load per shelf 75 kg, with uniformly distributed load. 48x shelf supports, used Suitable for smooth uprights Finish: sendzimir galvanized 02x cross braces, used Model designation: KV31313 Weight / unit: approx. 0.405 kg / unit Finish: sendzimir galvanized 12x collapsible folding boxes, used Color: grey External dimensions LxWxH: 600x400x400 mm Internal dimensions LxWxH: 555x355x385 mm Height when folded: 85 mm Stacked height: 75 mm Handles, front side: open Handles, long side: closed Weight: 3.41 kg / unit Water drainage holes are present in the base of the box! 01x load capacity sign Indicating bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any desired transport or shipment of this item is subject to additional costs, which can be provided separately depending on the delivery location and scope. Please inquire with us for further details.

Condition: good (used), Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rack rows: 01 pcs. Rack length: 1,660 mm Number of bays per rack row: 01 pcs. Scope of delivery includes: 02 x upright frames, used Material finish: sendzimir-galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / pc.: approx. 8.92 kg Incl. bracing and base plates (Upright frames are pre-assembled) Height: 2,490 mm Depth: 600 mm 06 x shelf panels, used Material finish: sendzimir-galvanized For frame depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / pc.: approx. 8.12 kg Max. load per shelf: 75 kg (evenly distributed load) 24 x shelf supports, used Suitable for smooth uprights Material finish: sendzimir-galvanized 01 x cross brace, used Type designation: KV31313 Weight / pc.: approx. 0.405 kg Material finish: sendzimir-galvanized 20 x foldable storage boxes, used Material color: grey External dimensions LxWxH: 600x400x400 mm Internal dimensions LxWxH: 555x355x385 mm Height when folded: 85 mm Height when stacked: 75 mm Handles on front side: open Handles on long side: closed Weight: 3.41 kg / pc. Kdjdpfxoy Dqcqo Ai Rsr Drain holes are present on the bottom of the box! Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Transport or shipment beyond collection is subject to additional costs, which can be requested from us separately depending on the place of delivery and scope of delivery.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: DT1UE18105029734, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, is suitable for CMP and SCC 61/101 electric combi-steamers manufactured from 2011 to the present (index H+I). The hood has been inspected in our in-house workshop and is fully functional. The hood has dents and scratches on one side panel due to improper transportation. This does not affect the hood's functions; however, for this reason, we offer it at a special price. The list price for this Ultra Vent hood is €3,696 net. Service: We will gladly assist you in finding a certified Rational customer service provider. Are you looking for a specific Rational appliance type? Ask us; we have access to an extensive range of used and new equipment. We will be happy to advise you on all appliance types. Our used equipment service for you: * 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. * Professional overhaul/inspection & expert cleaning * Inspected & fully functional - or your money back Kdedpfx Aiozu Sffe Ror * Flexible shipping or self-collection options * Competent advice - before and after purchase * Provision of operating manuals, connection diagrams & spare parts * Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which captures and removes vapors. Complex measures for exhaust system installation are a thing of the past. An external connection is completely eliminated. Installation is simple and can even be done retroactively. Technical data: * W x D x H: approx. 854 x 1226 x 470 mm * Power connection: V: 230 / Hz: 50-60 * Weight: approx. 55 kg * Serial number: DT1UE18105029734 * Year of manufacture: 2018 Condition: used, fully functional Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. Sales are subject exclusively to our general terms and conditions.

Condition: used, mileage: 493,082 km, power: 205 kW (278.72 HP), first registration: 03/2005, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,300 mm, loading space length: 2,760 mm, loading space height: 400 mm, total length: 6,300 mm, total width: 2,300 mm, total height: 3,400 mm, Equipment: air conditioning, all wheel drive, crane, soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Unimog U500 3-way tipper + crane K 9501 (Vehicle 405) Unimog U500 3-way tipper + crane K 9501 (Vehicle 405) Registration date: 16.08 Mileage: 2 km Engine hours: 13,983 Engine displacement: 6,374 cc Power: 205 kW / 280 hp Engine: 6-cylinder Permissible gross vehicle weight: 15,000 kg, unladen weight: 9,100 kg, payload: 4,900 kg Overall length: 6,300 mm x overall width: 2,300 mm x overall height: 3,400 mm 2 x rotating beacon, 2 x signal horn, 2 x long-range headlights + 2 x work lights on roof rack Municipal hydraulics with 3 sections on the left and right at the front, non-pressurized return flow at the front Power take-off at the front Mounting plate with towing hook at the front Snowplow control prepared 1 pair of standard headlights + 1 pair of work lights on the A-pillar Leaf spring suspension 4x4 all-wheel drive Crane Palfinger PK 9501, manufactured in 2004, with 2 x hydraulic supports, series S-106-SK-A, Mpa 30.0 with 3 x hydraulic extension Crane control from below + remote control Rear view camera 2 x LED reversing lights Trailer hitch Rockinger Tipping platform (3-way tipper) L: 2,760 mm x W: 2,300 mm x H: 400 mm, 6 x lashing eyes recessed in the tipping floor Tires 385/65R22.5, front approx. 40%, rear approx. 80/80% Air connections red and yellow at the rear 3 x sections at the rear for hydraulics 1+2 seater Telligent M/A with foldable clutch 2 x electric windows, 2 x electric mirrors + mirror heating Joystick control Hands-free telephone system prepared Heated driver's seat Axle locking front and rear Headlight range adjustment Kdsdpozviutofx Ai Ror Radio/CD Reinforced engine brake Rear view camera with monitor Price: €40,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). 2. Felder AF 14 mobile dust extraction unit (included): Model: Felder AF 14 (movable on rollers) Power: Powerful motor with robust steel fan wheel Kedpfx Aiszrl A Es Rodr Airflow: Max. 2,350 m³/h for excellent chip extraction Convenience: Practical quick-change system for chip bags Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement.

Condition: excellent (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 4110, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,400 mm, overall weight: 11,000 kg, spindle speed (max.): 4,000 rpm, coolant supply: 7 bar, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 14, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CMA GRD 4514 The CMA CNC machining center GRD 4514 offers a highly efficient solution for flexible drilling, threading, and milling operations in an extended format. Equipped with a 13.1 kW motor and a spindle speed of 50 to 4000 rpm, the system enables effortless drilling of holes up to 36 mm, as well as the cutting of threads up to M24 (based on ST 40 and HSS-Co cutting insert drills). - Extended work area and travel ranges: Table dimensions: 4500 x 1330 mm (effective machining length X-axis: 4500 mm) - Travel ranges X/Y/Z: 4500 x 1450 x 500 mm - Chip conveyor: Directly integrated into the machine table for optimal chip removal Productivity through pendulum operation: Thanks to the generous X-axis travel of 4500 mm, this variant is ideally suited for efficient pendulum operation. You can safely load and unload workpieces on one half of the table while the machine produces uninterruptedly on the other half. Protection is provided on the front side by a dynamically moving laser area sensor on the machine head. Software & Intelligent Control: Graphical programming: Including automatic determination of cutting data and nesting of multiple products, even different ones, on the large table. Collision warning: Integrated protection for maximum process safety. Height correction: automatic measurement and correction of the workpiece height for 100% precise countersinking and reaming. CAD/CAM extension: Optionally, a conversion of 2D/3D drawings directly into DIN/ISO machine programs is possible. Standard equipment of the complete system: - Automatic tool changer for 14 tools - Automatic tool length measurement - Fixed light curtain in the Y-direction (500 mm above the table) and rear protective fence - Powerful coolant system with emulsion - Ethernet connection for fast remote service Ksdpfezuw Eqox Ai Rsdr

Condition: used, Upright: 5000 × 1500 mm, 17 pcs Upright: 5500 × 1300 mm, 8 pcs Upright: 3500 × 1100 mm, 5 pcs Upright: 5500 × 510 mm, 3 pcs Upright column: 5000 mm, 11 pcs Beam: 1350 × 65 mm, 199 pcs Beam: 1350 × 60 mm, 19 pcs Kdodpjxcua Uefx Ai Rer Carriage rail: 8650 mm, 28 pcs Carriage rail: 7860 mm, 12 pcs Carriage rail with end cap: 6000 mm, 40 pcs Carriage end piece: 40 pcs Upright brace: 1400 mm, 70 pcs 1 carriage + charger + remote control

Condition: used, 200 linear meters of Pallet Racking – Schäfer Palflex Used, in good condition, see photos. Kedpfxovfnnzs Ai Rsdr Height: 6.5 m Depth: 110 cm, galvanized Field load: 24,000 kg Beam length: 4.1 m, orange Beam load capacity per level/bay: 3,000 kg Negotiable price: €17,900 net ex warehouse The offer includes: + 49 units of frames, pre-assembled, depth 110 cm, height 6.5 m + 288 units of beams, length 4.1 m, 3,000 kg load capacity per level/bay + 576 units of safety locking devices + 196 units of concrete anchors Used corner protectors are immediately available, surcharge per piece: €15 net! Load capacity signs, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. The goods are in stock. Transport and assembly are possible upon request. Inspection can be arranged at any time. Further information upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes, errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions; all prices exclude VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description text: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including a clean sweep clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and clean sweep handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / a heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles Kdsdpfx Aezp Nz Tsi Rsr 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of rack rows: 01 pc Length per rack row: 22,440 mm Number of bays per rack row: 06 pcs Number of levels incl. ground level: 06 pcs Technical Data for Capacity: Pallet spaces per bay: 28 pcs Pallet spaces per rack row: 168 pcs Total pallet spaces: 168 pcs Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. pallet weight: 900 kg Max. bay load: 19,000 kg Lowest clear storage height: 1,080 | 880 mm Scope of delivery includes: 07x Pallet rack frames, used Material finish: Sendzimir galvanized Frame type: P215 Profile dim.: 120 x 100 x 2.5 mm Including horizontal and diagonal braces, and base plates Frames are pre-assembled (bolted construction) Height: 14,100 mm Depth: 1,050 mm 72x Pallet rack beams, used Material finish: RAL 5010 gentian blue INP profile: 120 x 58 mm Beam type: TRV1-360-12-l Connector: 4 hooks Clear width: approx. 3,600 mm Max. load per pair of beams: 3,600 kg, with evenly distributed load 144x Locking pins, used Material finish: Sendzimir galvanized Kjdpfx Aeyc S Tasi Redr For securing the beams against unintentional removal 28x Bolt anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x Levelling plates, used Design: fully galvanized For leveling rack frames that are set up on uneven floors 01x Load sign with specifications for bay and compartment loads, manufacturer, and commissioning number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Transportation or shipping of this item is subject to additional costs, which can be quoted separately depending on the delivery location and order volume.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Polypal Type: Stockpal Technical Data for Configuration: Number of Rack Rows: 1 unit Length per Rack Row: 25,150 mm Number of Bays per Row: 9 units Number of Levels plus Ground Level: 5 units Volume Data: Pallet Positions per Bay: 18 units Number of Pallet Positions per Row: 162 units Total Number of Pallet Positions: 162 units Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Kdsdpfjx A Anmjx Ai Ror Total Height incl. Pallet: n.d. Max. Weight per Pallet: 500 kg Scope of Delivery: 10x Pallet Rack Uprights, used Frame profile color: blue Beamwork color: sendzimir galvanized Type: SKMO 5220 P Profile dimensions: 85 x 63 x 2 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted beamwork) Height: 8,000 mm Depth: 1,100 mm 36x Pallet Rack Beams, used Color: RAL 5001 blue Box profile: 120 x 50 mm Design: header beam Beam type: SKVBN 09850NP22 Connector: 3 hook Clear span: 2,700 mm Max. load per beam pair: 1,500 kg (with evenly distributed load) 72x Safety Pins, used Color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting 40x Anchor Bolts, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Material: carbon steel, galvanized Approved for: cracked concrete 20x Shim Plates, used Material: plastic For leveling upright frames installed on uneven floors 1x Load Capacity Sign Specifying bay and shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only offered for collection. If transport or shipment is requested beyond this, additional costs will apply, which can be individually quoted depending on destination and scope of delivery.

Condition: good (used), Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 25,300 mm Number of bays / rack row: 09 pcs. 2,700 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 81 pcs. Total pallet spaces: 81 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg The scope of delivery includes: 10x pallet rack uprights, used Material color: blue Upright type: A103 Upright profile: 100 x 79 x 3.00 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( bolted framework ) 2,300 mm high 1,100 mm deep 36x pallet rack beams, new Material color: RAL 2001 orange Box profile: 110 x 50 mm Beam type: 2C-S 1115 Clear width: 2,700 mm Agraffe: G.E. - 3 Max. load per pair of beams 3,000 kg, with evenly distributed load 72x integrated locking pin, new Material color: orange To secure the longitudinal beams against unintentional lifting out 40x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven ground 01x load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Currently available from stock: 23 pcs. Kdsdpfx Aistq Sm Ho Rsr Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical Specifications for the Pallet Racking System: Racking System: SLP Installation Specifications: Number of Racking Aisles: 01 pc. Length per Aisle: 15,480 mm Number of Bays per Aisle: 05 pcs. Number of Levels incl. Ground Level: 03 pcs. Scope of Delivery Includes: 06x Pallet Rack Uprights, used Material finish: sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 mm Incl. horizontal and diagonal bracing, base plates Uprights are pre-assembled (welded framework) Height: 5,400 mm Depth: 1,100 mm 30x Pallet Rack Beams, used Material finish: grey IPE profile: 100 x 55 mm Connector: 3 HK (hooks) Clear span: 3,000 mm Kodpexyf Rfjfx Ai Rsdr 60x Safety Pins, used Material finish: sendzimir galvanized For securing beams against unintentional removal 24x Anchor Bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 12x Shim Plates, used Finish: completely galvanized For leveling upright frames that are installed on uneven floors 01x Load Capacity Sign with details on bay and shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any transport or shipping required beyond this is subject to additional costs, which can be quoted separately depending on delivery location and scope.

Condition: good (used), Technical Data of the Pallet Racking System: Racking System: SLP Technical Data for Assembly: Number of Racking Rows: 01 pc Length per Racking Row: 21,640 mm Number of Bays per Row: 07 pcs Number of Levels incl. Ground Level: 02 pcs Scope of Delivery: 08x Pallet Rack Uprights, used Material finish: Sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (welded lattice construction) Height: 2,310 mm Depth: 1,100 mm 28x Pallet Rack Beams, used Material finish: grey Kedpfx Ajxy Hccoi Rjdr IPE profile: 100 x 55 mm Connector type: 3-hook (agraf) Clear span: 3,000 mm 56x Safety Pins, used Material finish: Sendzimir galvanized For securing the horizontal beams against unintentional lifting 32x Anchor Bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 16x Shim Plates, used Finish: fully galvanized For leveling rack uprights installed on uneven floors 01x Load Sign Stating bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding the item: This item is available for collection only. Any additional transport or shipping requested for this article will incur extra costs, which can be determined upon request depending on delivery location and scope of supply.

Condition: good (used), Year of construction: 2009, Meta HN 85-20 pallet racking system, 12 uprights 6600 mm high, depth 800 mm, 20 bays of 3600 mm HN 120-20, 4 bays of 2700 mm HN 120-20, including 27 chipboards, 30 mm thick Kedpsyq S Rbjfx Ai Redr

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Lücht & Palm Type: MB Note: Due to the hot-dip galvanized finish, the racks are suitable for outdoor use. Scope of delivery includes: 16x Pallet Rack Uprights, used Kedpfsult Szex Ai Redr Material finish: hot-dip galvanized Frame profile dimensions: U 120 x 50 x 5 mm Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (welded truss construction) Height: 4,000 mm Depth: 900 mm 59x Pallet Rack Beams, used Material finish: hot-dip galvanized Profile: IPE 120 x 64 mm Clear span: 5,015 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 16x Frame Connectors, used Material finish: hot-dip galvanized Profile: L 40 x 40 x 4 mm Clear width: 200 mm 64x Anchor Bolts, new Manufacturer: Hilti Model: HST2RM12x105/10 Design: Stainless steel 32x Shims, used Finish: galvanized For leveling the rack uprights installed on uneven floors 01x Load Sign With field and bay load information, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Incl. mounting material Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If you require transport or shipping beyond this, additional costs will apply, which can be quoted individually depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH Kdodpfx Aszubtlsi Ror • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, clear span: 2,700 mm, total length: 45,600 mm, total width: 1,200 mm, total height: 4,500 mm, load per truss pair (max.): 2,370 kg, load capacity per storage section: 12,000 kg, number of shelf rows: 6, Dexion P90 heavy-duty pallet racking systems – galvanized – approx. 45.6 m total length – 24 racking bays – industrial design For sale is a comprehensive package of high-quality pallet racking systems from the manufacturer Dexion, System P90/H, in a galvanized industrial design. The racking systems come from a modern industrial hall and are ideally suited for warehouses, logistics, production facilities, toolmaking, mold making or mechanical engineering. All systems have pallet support rails for Euro pallets and are designed for high loads. The galvanized design provides durable corrosion protection and ensures a long service life even under demanding operating conditions. The sale is preferably as a complete package, but individual sales are also possible. Total scope * 6 complete pallet racking systems * Manufacturer: Dexion * System: P90 / H * Year of manufacture: approx. 2010–2011 * total 24 racking bays * Total length approx. 45,600 mm * Height approx. 4,500 mm * Depth approx. 1,200 mm * total 109 pairs of crossbeams Kdedpfezkuykox Ai Rsr * complete equipment with pallet support rails * partially with impact protection Manufacturer: Dexion System: P90 / H Design: galvanized Crossbeam types: * SLO-089/20 * SLO-102/20 Bay load: * up to 2,370 kg Field load: * up to 12,000 kg Bay height: * up to approx. 1,300 mm Axial dimensions: * 1,800 mm * 2,700 mm Racking height: * approx. 4,500 mm Racking depth: * approx. 1,200 mm ⸻ Scope of delivery * 6 complete pallet racking systems * 24 racking bays * 109 pairs of crossbeams * all upright frames * bracing * pallet support rails * back panel mesh (depending on the system) * impact protection (depending on the system) Delivery without stored goods, pallets and other items shown in the pictures. Condition The racking systems come from industrial use and are in a well-maintained, used condition with the usual signs of wear and tear due to age and use. A large part of the systems has been inspected according to DIN EN 15635 by LB Knape or Regal Steger.

Condition: good (used), Technical data for shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for configuration: Number of shelving rows: 01 unit Shelving length: 6,560 mm Number of bays per row: 04 units Scope of delivery includes: 05x upright frames, used Kodpfx Aijy E N Nxj Redr Material finish: sendzimir galvanized Design: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / unit: approx. 8.92 kg Including bracing and base plates (uprights are pre-assembled) 2,490 mm high 600 mm deep 24x shelves, used Material finish: sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 594 mm Height: approx. 30 mm Weight / unit: approx. 8.12 kg Maximum load per shelf 75 kg, with evenly distributed load. 96x shelf supports, used Suitable for smooth upright frames Material finish: sendzimir galvanized 02x cross braces, used Type designation: KV31313 Weight / unit: approx. 0.405 kg Material finish: sendzimir galvanized 01x load capacity sign with information on bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only offered for collection. If transport or shipping is required, this will incur additional costs, which can be requested separately depending on the delivery location and scope.

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Dexion Type: P 90 Technical specifications for installation: Number of rack rows: 1 Length per rack row: 36,910 mm Number of bays per rack row: 9 Number of levels plus floor level: 3 Kdsdpfxjwigq Ij Ai Ror The scope of delivery includes: 10x pallet rack uprights, used Material color: Sendzimir galvanized Type: 100|25 Profile dimensions: 100 x 100 x 2.5 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 6,000 mm high 1,100 mm deep 54x pallet rack crossbeams, used Material color: Sendzimir galvanized Box profile: 147 x 50 mm Crossbeam type: SLB 147|18 Clamp: 5 HK Clear width: 3,990 mm Max. load per pair of crossbeams: 3,900 kg, with uniform load. Distributed load 108x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 40x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x leveling plates, used Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: AE/033731, functionality: fully functional, cutting height (max.): 60 mm, saw blade diameter: 300 mm, rotational speed (min.): 4,650 rpm, overall weight: 3,006 kg, table height: 950 mm, Panel Saw – Technical Specifications Regarding the Casadei Busellato AXO 200 automatic panel saw, its key technical specifications are as follows: Parameter Value Cutting length 3800 Max. blade extension 60 mm Main motor power 9 kW Scoring saw motor power 1.3 kW Number of clamps (standard) 6 Main blade diameter 300 mm Scoring saw diameter 160 mm Main blade rotation speed 4650 rpm Scoring saw rotation speed 5850 rpm Kedpszkbhzefx Ai Redr Work table height 950 mm Zebra GK4 20T label printer The machine is designed for cutting: MDF, particleboard, plywood, laminates, and other wood-based materials. The structural features include a rigid steel frame, a CNC-controlled automatic pusher, an air cushion table that facilitates the movement of panels, and the possibility of expansion with additional clamps and cut optimization. The saw will be in continuous operation on a part-time basis (1/4 of full-time) until the end of October 2026. Assistance will be provided with loading the saw. Disassembly for transport: 500 Euros. Loading onto a truck: 300 Euros.

Condition: good (used), Year of construction: 1991, operating hours: 49,637 h, functionality: fully functional, machine/vehicle number: 9666, ram adjustment: 64 mm, conveyor belt width: 203 mm, pressing force: 50 t, control cabinet length: 940 mm, control cabinet width: 760 mm, stroke length: 1,651 mm, input voltage: 380 V, overall weight: 9,000 kg, control voltage: 24 V, sheet thickness steel (max.): 4 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 4 mm, Technical Data Manufacturer: BRUDERER AG Model: BSTA 50 EL CNC Machine Type: CNC High-Performance Punching Machine Year of Construction: 1991 Machine Number: 9666 Press Force: 500 kN (50 t) Connected Load: 40 kW Kedpfxozuur Uo Ai Rodr Main Motor Power: 25 kW Supply Voltage: 380 V / 50 Hz Control Voltage: 24 V DC Compressed Air Connection: 6–10 bar Operating Hours: approx. 49,637 h Adjustable Stroke: 16–51 mm Mounting Space/Clamping Plate: 760 x 940 mm Main Drive: 22 kW Power Supply: 400 V / 50 Hz Table Area: 940 x 580 mm Strip Feed Height (adjustable): 50–140 mm Max. Strip Width: 203 mm Max. Material Thickness: 4 mm Dimensions of machine with BBV 202: 2390 x 1270 x 3090 mm Machine Weight: approx. 9000 kg Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available.