Used Parallel Vice for sale (2,070)

Condition: refurbished (used), Year of construction: 2020, operating hours: 10,500 h, load capacity: 4,990 kg, lifting height: 5,000 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 3,290 mm, battery voltage: 80 V, fork length: 1,200 mm, empty load weight: 5,731 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Nedpozf Uvnefx Ai Tjwn Our forklifts are technically reconditioned according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Forklift data: Manufacturer: Jungheinrich Type: Front forklift EFG 550s Drive type: Electric Load capacity: 4,990 kg Year of manufacture: 2020 Operating hours: 10,500 Lifting height: 5,000 mm Mast type: Duplex Free lift: No Overall height: 3,290 mm Fork length: 1,200 mm Unladen weight: 5,731 kg Load center: 500 mm Tires: Solid rubber Model type: EFG 550s Battery type: PzS Voltage: 80 V Battery weight: 2,169 kg Cab type: Full cab - front, roof & rear window + steel doors (suspended) Cab equipment: SoloPilot control element Cab equipment: Air-suspended seat, electrically adjustable Cab equipment: Cabin heating system, adjustable Cab equipment: Cabin air conditioning system, adjustable Lighting: Work lights 2x front Lighting: Work lights 2x rear Lighting: Rotating beacon Lighting: Blue spot rear light - safety light Lighting: Road traffic regulations equipment... Attachment: Side shifter Attachment: Additional hydraulic circuit - routed to the fork carriage

Condition: refurbished (used), Year of construction: 2019, operating hours: 2,456 h, load capacity: 2,500 kg, lifting height: 122 mm, load center: 1,200 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 2,400 mm, empty load weight: 576 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrical systems – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Manufacturer: Jungheinrich Type: Order picker ECE 225 Drive type: Electric Load capacity: 2,500 kg Year of manufacture: 2019 Operating hours: 2,456 Lifting height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 2,400 mm Unladen weight: 576 kg Load center: 1,200 mm Tires: Polyurethane Model type: ECE 225 Battery type: PzS Voltage: 24 V Nsdpfxezf Uwlo Ai Tjwn Battery weight: 535 kg

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Nedpfey Ayrrox Ai Tjwn Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: excellent (used), Deckel FP1 AKTIV (3-Axis Active) Machine no.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2,000 rpm Motor power: 1.6 and 2 kW Power supply: 380 V, 50 Hz Equipment/Accessories: - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Vertical milling head quill travel: 60 mm - Vertical milling head swivels and extends 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Central lubrication system - Machine vice - Various toolholders/collets/tools Space required (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 850 kg The machine has been visually reconditioned and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Parallelism deviation Y axis: 0.002 mm (measurement path: 150 mm) Parallelism deviation X axis: 0.01 mm (measurement path: 300 mm) Geometry inspection videos can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New guide cover for Z axis + various attached parts Njdpeyll A Tjfx Ai Tewn - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 30,917 h, load capacity: 6,000 kg, lifting height: 4,650 mm, load center: 600 mm, fuel type: diesel, mast type: telescopic, gearing type: hydrostat, overall weight: 10,000 kg, empty load weight: 10,000 kg, color: red, Equipment: air conditioning, cabin, clamp, fork extension, gripper hydraulics, head guard, lighting, pallet forks, retractable fork, sideshift, MGC.pl presents a LINDE H 60 D EVO forklift from 2018. A robust internal combustion forklift designed for demanding transport and handling tasks. With a nominal load capacity of 6,000 kg, an enclosed operator cabin, and a set of three forks, this model is perfectly suited for industrial plants, logistics centers, building material warehouses, and handling heavy loads. TECHNICAL DATA: • Brand and model: LINDE H 60 D EVO • Year of manufacture: 2018 • Diesel engine • Engine power: 104 hp • Hour meter reading: 30,950 hours • Nominal load capacity: 6,000 kg • Maximum lifting height: 4.65 m • Hydrostatic drive – smooth operation and precise maneuvering • Enclosed operator cabin • Wide fork set – triple forks DESIGNED FOR HEAVY-DUTY WORK The hydrostatic drive enables smooth starting, efficient changes in driving direction, and precise maneuvering to the load. This is particularly useful when loading trucks and working in confined spaces. The enclosed cabin protects the operator from wind and rain, increasing comfort during outdoor work. The set of three forks provides additional support for appropriately selected, wide loads. The load capacity for a specific load, lifting height, and attached equipment must be selected according to the forklift's load chart. CONDITION AND HISTORY: • First owner • Complete service documentation • Service book • Regularly serviced • Accident-free Njdpexu Ii Tsfx Ai Tjwn • Original paint • Ready for work – operation in accordance with the required approvals The stated price is the net price and applies to export and business customers. A significant discount is possible for individual customers – Please contact us directly by phone to get your best price. _____ After price negotiations, we can record a detailed video or perform a computer test or paint thickness measurement for a decisive customer, allowing them to purchase the equipment remotely with confidence. _____ Of course, we highly encourage you to come and inspect the equipment. However, if that is not possible, this form of purchase will be available, guaranteeing a secure transaction.

Condition: used, Year of construction: 2008, cutting diameter / mm saw band length / mm cutting width / mm including roller conveyor 4000 x 500 x 850 mm Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Nwedpewm Rqtsfx Ai Ton Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Parallel sawing feed system in profile guide rails Mitsubishi NC program control E1032 for preselection of 90 sets, each with a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Hydraulic material clamping with long-stroke cylinder, opening on both sides Material clamping with double vice in front of and behind the saw blade Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: used, Year of construction: 2024, Warehouse Service  for Used Machines  Our storage service extends greater flexibility for both buyers and sellers seeking to purchase or sell used beverage machines. With access to our dedicated warehouse, sellers can improve their resale value by extending the selling cycles, while buyers can take advantage of temporary storage options to better coordinate their used machinery purchases with their delivery requirements. For Sellers  Get your machines out on time and still maximize your resale value: We store your machine as long as it takes to get the best resale value for your asset. Store-And-Sell Option Avoid scrapping Maximize resale values For Buyers  Secure your machine and plan your project with no time pressure: We store your machine as long as you need to set-up your project and be ready for assembly. Buy-And-Store Option Secure purchase opportunities Increase logistics efficiency Our Expertise Our services cover everything from pre-storage to post-storage operations. Prior to storing your machines, we take care of professional dismantling, documentation, transportation, unloading, and installation. Once in storage, we offer cleaning, maintenance, machine adaptation, spare parts exchange, and machine presentations based on project requirements. When it is time for stored machines to leave our facilities, we provide fullservice logistics to ensure a seamless transition, from taking them out of storage to transport and re-installation at new production sites. The facility located in Bippen, Germany offers the different features to best serve your needs: Open space, closed roof (open and closed sidewalls) and heated premises.    Get in touch with us:  Nwjdpfx Asu Ax Abei Tjn

Condition: excellent (used), Fully hydraulic high-performance band saw in the heaviest design, with horizontally parallel movable saw blade, for cutting profiles, pipes and solid material in all qualities, including extremely difficult to machine material (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw blades. Saw unit in a fully solid design made of polymer concrete, this ensures the highest level of smoothness and service life of the saw blades. The saw unit is guided via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned hard metal saw blade guides. The material is tensioned via two hydraulic vices. The control system offers simple machine operation. The length can be set using a counter with 0.1 mm resolution. The quantity is set using a quantity counter, which switches the machine off when the quantity is reached. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. KASTO - fully hydraulic horizontal band saw HBA 420 AU CNC (420 mm x 420 mm / Ø 420 mm) Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel movable saw band, for cutting profiles, pipes and solid material in all qualities, including extremely difficult-to-machine materials (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw bands. The saw unit is made of solid polymer concrete, which ensures the highest level of smoothness and service life of the saw bands. The saw unit is guided by two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically pre-tensioned hard metal saw band guides. Material tensioning is carried out via two horizontal frame clamps. Material feed via a non-driven roller conveyor integrated into the machine with twelve transport rollers, which makes it easy to transport short leftover pieces. Cutting area round 420 mm Cutting area square 420x420 mm Material feed with automatic 600 mm Multiple material feed 9999 mm Cutting speed continuously variable 20-130 m/min Total drive power 8 kW Drive power of saw motor 5.5 kW Clamping pressure reduction continuously variable Material support height 700 mm Saw band dimensions 6300x41x1.3 mm Shortest cutting length with automatic operation 6 mm Remaining piece length with automatic operation 100 mm Voltage 400V/50 Hz Dimensions LxWxH 3050x2420x2130 mm Weight 2920 kg. Year of manufacture 1995 Nwjdpfx Aijvzlgao Tsn Accessories: Chip conveyor, coolant system Special accessories: Driven machine roller conveyor CNC control Frequency-controlled drive Material end via Light barrier Cutting speed and feed controlled

Condition: used, Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center -Number: 9x containers with 200 liter cleaning fluid -Price: complete -packed on: EURO pallet -Weight: 252 kg Nwjdjdtm Ukjpfx Ai Ten

Condition: used, operating hours: 10,420 h, functionality: fully functional, machine/vehicle number: ES2234, mileage: 74,155 km, power: 75 kW (101.97 HP), first registration: 05/2016, overall weight: 4,900 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,900 kg, empty load weight: 3,000 kg, next inspection (TÜV): 01/2027, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, Equipment: hydraulics, low noise, soot filter, * Hako Citymaster 2000 vacuum sweeper * from first ownership / former municipal vehicle * Approved as a self-propelled work machine 50 km/h (sticker exempt) * On request, the major engine inspection with timing belt, water pump, oil and filters can be carried out by us free of charge upon sale * New disc brushes * Low emission Euro 5 * 7299 working hours * 10420 total operating hours * 74155 kilometers * VW 2.0 TDI industrial engine (4 cylinders) * Diesel particulate filter * Reversing camera * Switchable all-wheel steering * Sweeping width adjustable from 140 cm to 260 cm * Water pumps for fresh and circulating water * 350 liter fresh water tank * Tiltable stainless steel debris container * ISRI swing seat driver * Yellow rotating beacon * Ready to use condition --- We sell exclusively for our own and under exclusion of any warranty. Errors, changes and prior sale reserved --- Nwodemnp Afopfx Ai Tsn * We are there for you Monday - Friday from 9.00 - 17.00, Saturday by appointment, outside these opening hours appointments can be made by telephone. * We will be happy to trade in your current used appliance/vehicle. * Sales to tradesmen and exporters are given preferential treatment, this applies to our entire vehicle stock. * The above information is non-binding, subject to errors, changes and prior sale!

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided bandsaw, semi-automatic model with stepless mitre adjustment on both sides, 30° - 45° - 90° - 135°. With patented mitre system (ERP No. 0491120). Particularly suitable for universal applications with various cross-sections, materials, and frequent mitre changes. The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and in the mitre range. MEBA Eco-Saw-Innovation 2000 The universally applicable mitre bandsaw MEBA 335 DG is ergonomically advanced and offers an optimal price-performance ratio. Easy, centralised operation. The machine controls comply with CE standard 89/289. Technical Data: Cutting range: round/flat 90° 335/500x335 mm 45° right 330/305x335 mm 30° right 180/170x335 mm 45° left 305/305x335 mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable via operator panel Drive - Saw band: 3 kW; 400 V, 50 Hz - Hydraulic: 0.55 kW - Coolant pump: 0.11 kW Saw frame feed: Stepless up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical modifications reserved. Standard equipment of the MEBA 335 DG-500 Semi-automatic sawing cycle with workpiece clamping - sawing - frame returns to preset height after completed cut MEBA High-Performance Package: Stepless hydraulic cutting pressure and feed monitoring at the blade back. This ensures optimal conditions for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled sections. Manual mitre adjustment with digital readout, accuracy to 0.1° Rapid lowering of the saw frame to the material edge via pushbutton Patented double mitre system (ERP No. 0491120) Nsdpfx Ast Dpw Roi Town Unique double mitre bandsaw where mitres on both sides can be quickly and economically set by swiveling the saw frame and material support. Automatic movement of the clamping vices and digital mitre setting. The material vice automatically moves in the cutting direction to suit the desired mitre, ensuring the workpiece is always clamped square and close to the saw blade. The pivot point for mitre is at the intersection of the saw blade and fixed vice, so length measurements remain accurate regardless of angle. Hydraulic full-stroke workpiece clamping. Quick-clamping for material. At every saw frame angle, the material is clamped parallel at 90°. Rigid two-column linear guided saw frame Saw blade inclined 3° to the material support surface. Centralised machine control Saw frame clearance height adjustment Adjustable moveable blade guide arm for material width Carbide blade guide for band deflection wheels Synchronised chip cleaning brush Saw band tension with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: new, Year of construction: 2024, - Mobile scissor lift table with platform base frame and aluminum worktop format 1000x600mm - Operation for the up / down stroke takes place via a hydraulic foot pump - load capacity 200 kg - Construction height 400 mm - Useful stroke 610 mm - Maximum height 1010 mm - platform 1000x 600 mm - Weight approx. 35 kg Nwsdpfx Ajfhbvnoi Tjn - Swivel castor 2 pieces with brake, 2 pieces without brake - Wheel Ø 125 mm - Color gray aluminum

Condition: like new (used), We offer a comprehensive spare parts package for the machine types Doppstadt DW 3060 and Doppstadt AK 430/435/560. These are new and as-new parts! Please request our list! Nedpfx Aieqx Ur De Tjwn Do you have a problem with your bevel helical or planetary gearbox? We offer qualified repair service, spare parts, and new gearboxes! We will accept your defective gearbox as part exchange after inspection! Please send us your enquiry!

Condition: ready for operation (used), Crede Elektronik parallel-action welding pliers PSZ-G, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Njdpfoz D Rm Djx Ai Tewn

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: orange, overall weight: 7,200 kg, empty load weight: 7,200 kg, operation weight: 7,400 kg, tire condition: 80 %, axle configuration: 6x2, number of seats: 2, first registration: 12/2014, shovel volume: 3.8 m³, suspension: air, Year of construction: 2014, operating hours: 6,100 h, Equipment: adjustable chassis, hydraulics, WE HAVE THREE CATERPILLAR ASPHALT PAVERS IN STOCK: TWO ORANGE AND ONE YELLOW. The following offer applies to a 2014 Caterpillar AP300D with 6,100 operating hours, equipped with an AS3173 working table. For sale is a professional asphalt paver designed for the construction and renovation of surfaces in small and medium-sized road projects. Its compact dimensions, hydrostatic drive, and hydraulically adjustable working width make it suitable for use in urban areas, on local roads, in parking lots, and on bicycle paths. MACHINE SPECIFICATIONS • Manufacturer: Caterpillar • Model: AP300D • Year of manufacture: 2014 • Operating hours: 6,100 hours • VIN/PIN: CATAP300JTEN00136 • Chassis: wheeled • Working table: Caterpillar AS3173 • Table serial number: DLC00589 • Weight as indicated on the manufacturer’s plate: 7,400 kg • Maximum permissible total weight: 7,750 kg • Country of manufacture: Italy CATERPILLAR C4.4 ENGINE The four-cylinder Caterpillar C4.4 ACERT diesel engine with a displacement of 4.4 liters provides power to the machine's drive and working units. • Gross power: 55.5 kW / approximately 75 hp • Net power according to model documentation: 50.9 kW / approximately 69 hp • Rated engine speed: 2,200 rpm • Fuel tank capacity: 110 liters • Hydrostatic drive system • Catalog travel speed: up to 16 km/h • Catalog paving speed: up to 30 m/min Smooth speed control allows the work rate to be adjusted to the supply of the mixture and the conditions on the construction site. Paving, travel, and maneuvering modes facilitate operation during surfacing and machine movement. AS3173 WORKING TABLE — WORKING WIDTH 1.70–3.20 M The mounted Caterpillar AS3173 table allows for hydraulically adjustable paving width in the basic range of 1.70 to 3.20 m. Model expansion options: • Width up to 4.00 m after mounting additional extensions • Width from 0.65 m with an appropriate reduction attachment • Catalog cross-profile adjustment of the table: from -2.5% to +4.5% Nwodpfx Aiez I Srcs Tsn The AS3173 design includes electric heating of the working plates and a vibration system. The table forms the surface and provides preliminary compaction of the mixture before final compaction with a roller. MIX FEEDING SYSTEM The AP300D model has a front hopper with a catalog capacity of approximately 3.8 m³. The mixture delivered by the truck is transported by conveyors to the rear of the machine and then distributed by screws in front of the working table. Independent control of the conveyors and screws allows the material feed to be adjusted to the working width and rate. The ability to change the direction of their operation facilitates control of the mixture when finishing the working strip. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price.

Condition: excellent (used), Year of construction: 2016, operating hours: 5,397 h, functionality: fully functional, first registration: 12/2016, overall weight: 4,000 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,200 kg, empty load weight: 2,800 kg, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, electronic stability program (ESP), fog lights, hydraulics, MGC.pl in Łaziska Górne offers for sale a compact JOHNSTON C201 CX road sweeper from 2016, sourced from Sweden and previously owned by a company specializing in maintaining the cleanliness of roads and large facilities. The machine comes from a fleet of over 20 sweepers. According to information from the previous owner, it was regularly serviced. This particular unit stands out due to its excellent condition and equipment, including air conditioning and a reversing camera. Its small size, glazed cabin, and front brush assemblies make the C201 CX well-suited for use in residential areas, sidewalks, parking lots, and tight urban environments. ENGINE AND DRIVE The C201 CX uses a four-cylinder, turbocharged diesel engine with a displacement of 2970 cm³ and a hydrostatic drive. Smooth speed control allows you to adjust the driving speed to the amount of debris and working conditions. The hydrostatic system makes it easy to start, stop, and maneuver frequently while sweeping. The CX version is designed for travel at speeds up to 50 km/h, while the sweeping speed range is 0–16 km/h. SWEEPING SYSTEM AND SCOPE OF WORK Two front brushes sweep debris towards the suction nozzle. The vacuum system transports the collected material to the waste container, and the water system reduces dust during operation. The machine is designed for collecting sand, dust, fine gravel, leaves, and small debris from paved surfaces. Example applications: Regular maintenance of the cleanliness of streets and local roads; Sweeping sidewalks, pedestrian walkways, and paths of appropriate width; Cleaning parking lots, bus stops, and squares; Maintaining residential areas and urban spaces; Cleaning industrial areas and logistics centers; Removing residual sand after winter road maintenance; Servicing commercial facilities and private properties. The compact design makes it easy to work between parked vehicles and in areas with limited maneuvering space. IDENTIFICATION DATA AND WEIGHTS Brand: Johnston Sweepers Model: C201 CX Year of manufacture: 2016 Nwedpey U Nidofx Ai Tjn Serial number according to the data provided: 2000 / 207006 / 03 / 16 Maximum permissible total weight: 4000 kg Maximum permissible weight of the assembly: 4750 kg Maximum permissible front axle load: 1970 kg Maximum permissible rear axle load: 2030 kg CE marking PM10 Certified marking Acoustic power level according to the data provided: LWA 103 dB OPERATING PARAMETERS Geometric capacity of the waste container: 1.8 m³ Usable capacity of the container: approximately 1.5 m³ Fuel tank capacity: 52 l Brush diameter: approximately 850 mm Suction nozzle width: approximately 815 mm Unloading height: approximately 1545 mm Theoretical maximum sweeping performance: up to 36,800 m²/h Cataloged maximum climbing ability: up to 30% Actual performance depends on the type of surface, the amount of debris, the working speed, and the brush setting. DIMENSIONS Overall length: approximately 4270 mm Overall width: approximately 1315 mm Overall height: approximately 1985 mm EQUIPMENT Air conditioning Radio Reversing camera Glazed operator cabin Two front brush assemblies Suction system Water system to reduce dust Hydrostatic drive

Condition: refurbished (used), Year of construction: 2018, operating hours: 2,468 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,530 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 737 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on site now – we will find the right solution for you. Industrial truck data: Nwjdpfjz Ircnsx Ai Tsn Manufacturer: Jungheinrich Type: High lift pallet truck EJD 220 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2018 Operating hours: 2,468 Lifting height: 2,010 mm Mast type: Duplex Free lift: No Overall height: 1,530 mm Fork length: 1,200 mm Unladen weight: 737 kg Load center: 600 mm Tires: Polyurethane Model type: EJD 220 Battery type: PzS Voltage: 24 V Battery weight: 235 kg

Condition: refurbished (used), Year of construction: 2021, operating hours: 1,889 h, load capacity: 1,000 kg, lifting height: 2,700 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,850 mm, battery voltage: 25.6 V, fork length: 1,150 mm, empty load weight: 613 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrical systems – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Rigorous technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Manufacturer: Jungheinrich Type: High lift pallet truck EJC 110 Drive type: Electric Load capacity: 1,000 kg Year of manufacture: 2021 Operating hours: 1,889 Njdpfxjz Irczo Ai Tjwn Lifting height: 2,700 mm Mast type: Duplex Free lift: No Overall height: 1,850 mm Fork length: 1,150 mm Unladen weight: 613 kg Load center: 600 mm Tires: Polyurethane Model type: EJC 110 Battery type: Lithium-ion Voltage: 25.6 V Battery weight: 160 kg Charger: Charger integrated

Condition: refurbished (used), Year of construction: 2019, operating hours: 2,919 h, load capacity: 2,000 kg, lifting height: 2,100 mm, load center: 595 mm, fuel type: electric, mast type: duplex, construction height: 1,526 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 928 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical components – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: * Manufacturer: Jungheinrich * Type: High lift pallet truck ERD 220 * Drive type: Electric * Load capacity: 2,000 kg * Year of manufacture: 2019 * Operating hours: 2,919 * Lifting height: 2,100 mm * Mast type: Duplex * Free lift: No * Overall height: 1,526 mm * Fork length: 1,200 mm Nwodez Irc Uopfx Ai Tjn * Unladen weight: 928 kg * Load center: 595 mm * Tires: Polyurethane * Model type: ERD 220 * Battery type: PzS * Voltage: 24 V * Battery weight: 390 kg

Condition: used, mileage: 25,714 km, power: 85 kW (115.57 HP), first registration: 05/2022, fuel type: electric, overall weight: 3,200 kg, color: red, gearing type: automatic, number of seats: 2, total length: 5,140 mm, total width: 1,928 mm, total height: 1,909 mm, loading space length: 2,870 mm, loading space width: 1,650 mm, loading space height: 1,380 mm, Year of construction: 2022, Equipment: ABS, central locking, electronic stability program (ESP), No. 6 - You can find this and many other inspected Mercedes-Benz vans on our website: ----Fully electric Mercedes-Benz eVito 112 long version, from first ownership, in good overall condition. Electric motor 85 kW / battery 60 kWh (usable), range approx. 227 km. All maintenance and repair work has always been carried out directly at Mercedes-Benz. Includes charging cable, new MOT (TÜV), valid until 09/2026, and a recent service, also performed directly at Mercedes-Benz. Battery certificate available: 96% SOH.----Recent service: All maintenance and repair work has always been carried out directly at Mercedes-Benz, at 8,000, 15,000, 21,000, and 25,694 km (09/2026).----Permissible total weight: 3200 kg Unladen weight: 2343 kg Payload: 857 kg Wheelbase: 3200 mm VIN: W1V44760314115970 Warranty available with surcharge COC - document available 2 keys ----* First owner, well-maintained with service booklet, new MOT, recent service * Electric motor 85 kW * HV battery 60 kWh * Speed limiter 120 km/h * Charging cable Mode 3 (Type 2, 3X20A) * Audio system Audio 10 (DAB, Bluetooth) * Pre-conditioning * Active brake assist * Seat heating * Hands-free system * Airbag for driver and passenger * Loading compartment light LED * Heat-insulating glass * Light and rain sensor * Two-way speakers in the front * Steering wheel adjustable in height and inclination * Driving assistance system: Attention Assist (fatigue detection sensor) * Driving assistance system: Crosswind assist * Service interval indicator ASSYST * Electric windows * Central locking * and much more ----Errors, changes and prior sale reserved Njdpjz Htruefx Ai Town Special equipment: Audio system Audio 10 (DAB, Bluetooth), Equipment package: Top Load, Roof rack / base carrier, DAB tuner (digital radio reception), Automatic switching on of driving lights, Speed limiter 120 km/h, Rear door without glazing (opening angle 180 degrees), Wooden flooring in the cargo area, Charging cable (8.0 m) with Type 2 connector (20 A, Mode 3), Charging capacity HV battery 80 kW (direct current DC), Loading compartment light LED, Steering wheel with multifunction buttons incl. trip computer, Paneling in the loading / passenger compartment: Standard, Two-way speakers in the front Other equipment: 3rd brake light, Adaptive brake light, Airbag passenger side, Airbag driver side, Acoustic environmental protection (external sound), Exterior mirrors aspherical, both, Exterior mirrors mech. adjustable from inside, both, Outside temperature display, Brake system with ABS+ASR, Electric motor 85 kW (cont. 70 kW), Driving assistance system: Breakdown management, Cup holder in front, Seat belt pretensioners, Glove compartment lockable, HV battery 60 kWh, Body / structure: Box van Standard, Body / structure: long, Communication module (LTE) for digital services, Charging capacity HV battery 11 kW (alternating current AC), Loading compartment partition full height, Steering wheel (steering column mech. adjustable), Headlight range control, Mercedes-Benz emergency call system, Model refinement, Rear fog light, Wheelbase 3200 mm, Sliding door loading / passenger compartment right, Safety belt system with warning system (driver / passenger side), Safety belt system with warning system (driver side), Safety belt system with warning system (passenger side), Seat cover / upholstery: Fabric Caluma, Seats in the driver's cab: Passenger seat adjustable, Seats in the driver's cab: Driver's seat heated, Seats in the driver's cab: Driver's seat adjustable,

Condition: refurbished (used), Year of construction: 2021, operating hours: 4,046 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 377 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Industrial truck data: Nedpfx Aez Ii U Iji Tswn Manufacturer: Jungheinrich Type: Low lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 4,046 Lifting height: 750 mm Mast type: None Initial lift: Yes Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 377 kg Load center: 575 mm Tires: Polyurethane Model type: EJE C20 Battery type: PzS Voltage: 24 V Battery weight: 180 kg

Condition: refurbished (used), Year of construction: 2021, operating hours: 1,060 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 381 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical components – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Rigorous technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Nwedpfx Aiez Ikars Tjn Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 1,060 Lifting height: 750 mm Mast type: None Initial lift: Yes Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 381 kg Load center: 575 mm Tires: Polyurethane Model type: EJE C20 Battery type: PzS Voltage: 24 V Battery weight: 150 kg Charger: Charger integrated

Condition: refurbished (used), Year of construction: 2021, operating hours: 1,698 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 381 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Nedpfxoz Ika Sj Ai Tswn Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Rigorous technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 1,698 Lifting height: 750 mm Mast type: None Initial lift: Yes Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 381 kg Load center: 575 mm Tires: Polyurethane Model type: EJE C20 Battery type: PzS Voltage: 24 V Battery weight: 150 kg Charger: Charger integrated

Condition: refurbished (used), Year of construction: 2021, operating hours: 2,847 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 381 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. Nwsdpfsz Ikcajx Ai Tjn * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 2,847 Lifting height: 750 mm Mast type: None Initial lift: Yes Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 381 kg Load center: 575 mm Tires: Polyurethane Model type: EJE C20 Battery type: PzS Voltage: 24 V Battery weight: 150 kg Charger: Charger integrated

Condition: refurbished (used), Year of construction: 2021, operating hours: 3,979 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 377 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Nedpfx Aisz Ikcts Town Forklift data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 3,979 Lifting height: 750 mm Mast type: None Initial lift: Yes Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 377 kg Load center: 575 mm Tires: Polyurethane Model type: EJE C20 Voltage: 24 V Battery weight: 180 kg