Used Peddinghaus Peddicat 380 for sale (4,583)

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, total height: 29,620 mm, total length: 32,000 mm, total width: 28,480 mm, overall weight: 6,000 kg, controller model: Heidenhain TNC 640, coolant supply: 36 bar, rapid traverse Z-axis: 48 m/min, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rotary table diameter: 380 mm, spindle speed (max.): 12,000 rpm, table load: 200 kg, Equipment: chip conveyor, documentation/manual, Victor 5-Axis Machining Center VC-AX380 with Heidenhain TNC640 Control 5-axis simultaneous machining incl. calibration tool KinematicsOpt incl. calibration ball. Standard options: -Cooling system with high-pressure coolant pump MTH4-40/4 and supply hoses Bjdpjq Tafxsfx Ahmjdh -Full protection coolant cabin -Spindle oil cooler -Oil separator -Spiral chip conveyor -Rinsing gun and air gun -Operating tools and manuals Additional options: -Air through the spindle -Air conditioning unit in the control cabinet -Chip conveyor -40 tools -36 bar ICS with Mahle Duplex -Table rinsing -Workpiece measurement TS460 -Automatic door -Interface -8" 3-jaw chuck Images are exemplary and may differ. From stock Bergneustadt (subject to prior sale)

Condition: used, Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper -Manufacturer: SEW Eurodrive, braking resistor type BW 072-003 -Item number: 802 265 8 826 058 3. -Power: 75 Ohm/250W Bdedpfx Ahjq Untremeh -Quantity: 1x resistors available -Dimensions: 110/80/H15 mm -Weight: 0.3 kg

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 520 mm, roll pitch: 90 mm, total width: 595 mm, total height: 75 mm, total length: 2,970 mm, conveying length: 2,970 mm, construction width: 595 mm, construction height: 75 mm, TAF article number: 1000003809 Manufacturer: unknown Year of manufacture: unknown Overall dimensions: 2,970 x 595 x 75 mm (LxWxH) Cheek width: 595 mm Cheek height: 70 mm Bdsdpfonxh Hcox Ahmeh Conveyor length: 2,970 mm Conveyor width: 520 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 90 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: new, Rexroth DBETE-61/200YG24K31F1V pressure relief valve, R901103801FD, unused, 100% functional. Bsdji Ecrxspfx Ahmedh

Condition: used, Gear motor, electric motor, electric gear motor -Electric motor: for gearbox -for gear motor type: CB59-80K/4DBRF -Speed: 1380 rpm -Power: 0.55 kW -Worm shaft: Ø 20 mm -Construction: B5 -Protection class: IP 54 -Brake -Price: per piece -Number: 1x available Bsdpfx Ajdkbfmohmodh -Dimensions: 345/210/H160 mm -Weight: 13 kg

Condition: good (used), Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1380 rpm -Shaft: Ø 14 mm -Design: B5 Bdjdjdkbghspfx Ahmoh -Protection class: IP 44 -Dimensions: 295/205/H160 mm -Weight: 11 kg

Condition: used, Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Type: DFM-63-80-B-PPV-A-GF -Piston: Ø 63 mm -Stroke: 80 mm -pneumatic: cushioning Bedpfxedkpa Nj Ahmjdh -both sides: adjustable -Gliding guide -Weight: 7.34 kg

Condition: reconditioned (used), modernized machine with new LTG-StoreControl P control system External dimensions: Overall height 5860 mm Overall width 2940 mm Overall depth 1180 mm 25 trays, each with a load capacity of 165 kg in the clear internal dimensions: H = 380 mm Bdedpfxsdnzg Ne Ahmjh W = 2500 mm D = 410 mm Chain pitch 412 mm Total load capacity up to 4110 kg Deposit table at 1000 mm above floor level, with rubberized work surface Color scheme: GRAY / BROWN, surface cleaned, signs of wear possible Drive motor power: 1 x 1.8 kW / 400 Volt Base machine for this modernization: SYS 180 by Kardex Subject to errors, technical changes, and minor deviations from the photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: good (used), electric motor, three-phase motor -Power: 0.75 kW Bedpjb A Hkwefx Ahmjdh -Speed: 1380 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 54 -Number: 2x motors available Price: per piece -Dimensions: 270/215/H160 mm -Weight: 12 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6700x3350x1500 mm Weight 1000 kg Total power requirement 9 kw Bsdpfjvz Etmjx Ahmsdh

Condition: ready for operation (used), Siemens 1FT6082-1AF71-2AG1 motor SN: EJ960113803001 with optical encoder 2048 PPR, used, in good condition, fully functional, scope of delivery as per photos. Bodpjy Sdtxjfx Ahmedh

Condition: like new (used), Year of construction: 2020, functionality: limited functionality, operating hours: 50 h, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 80 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 72 mm, saw blade diameter: 380 mm, height adjustment type: pneumatic, actuation type: electric, total length: 7,500 mm, total width: 6,000 mm, total height: 1,900 mm, overall weight: 5,000 kg, table height: 1,000 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, AES Alpha Heavy Duty Beam Saw 3200 * 3800 mm | Showroom Condition | Less 100 Hours Category: Panel Saw / Beam Saw Condition: Used – Like new showroom machine Description: For sale: AES Alpha heavy duty beam saw. The machine has been used exclusively in a showroom for demonstrations and training. Bdsdpfeyzzgujx Ahmeh It is in working condition with less than 100 working hours. Equipped with all Yaskawa and Schneider Electric drivers. Technical Data: Cutting width: 3200 mm Bridge depth: 3800 mm Main motor: 15 kW (20 HP) Scoring motor: 2.2 kW (3 HP) Max cutting height: 72 mm Saw carriage speed: 70 m/min Pusher speed: 60 m/min Max blade: 380 mm Max scoring blade: 200 mm 8 clamps AES Alpha Heavy Duty Paneelzaag 3200 mm | Showroomstaat | Minder 100 Werkuren Categorie: Paneelzaag / Opdeelzaag Conditie: Gebruikt – Zo goed als nieuw (Showroom) Beschrijving: Te koop: AES Alpha heavy duty paneelzaagmachine. Deze machine werd uitsluitend gebruikt in een showroomomgeving voor demonstraties en trainingen. De machine verkeert in uitstekende staat en heeft minder dan 100 werkuren. Uitgerust met hoogwaardige aandrijvingen van Yaskawa en Schneider Electric, wat zorgt voor maximale betrouwbaarheid en precisie. Technische specificaties: Snijbreedte: 3200 mm Brugdiepte: 3800 mm Hoofdmotor: 15 kW (20 HP) Voorritsmotor: 2,2 kW (3 HP) Maximale zaaghoogte: 72 mm Zaagwagensnelheid: 70 m/min Duwbalk snelheid: 60 m/min Max. zaagdiameter: 380 mm Max. voorritsdiameter: 200 mm 8 klemmen Luchtkussentafel (3 stuks): 1 vast, 2 verplaatsbaar Pneumatische zaagwagen beweging Aandrijvingen: Yaskawa & Schneider Levering: Binnen 10 dagen mogelijk Prijs: Op aanvraag

Condition: used, mileage: 332,000 km, power: 280 kW (380.69 HP), first registration: 03/2002, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro3, Equipment: soot filter, - Retarder Bodey U Thqspfx Ahmjdh - Manual transmission - Silo tipper - Suspension: Leaf spring suspension

Condition: used, Used stainless steel tank with insulation Item number: 10904 Last use: CIP Volume: 3800 liters Bdodpfezxd U Tjx Ahmjh Type: Standing on 4 legs Material (in contact with medium): 1.4571 / AISI316 Manhole cover: Ø 500 mm Max. operating pressure: ATM Design: with insulation Tank dimensions: Inner diameter: 1600 mm Outer diameter: 1800 mm Cylindrical height: 1870 mm Overall width: 1950 mm Overall height: 3060 mm Materials: Inside: 1.4571 / AISI316 Outer parts: 1.4301 / AISI 304 Features: Outlet diameter: 65 mm Outlet valve: butterfly valve Height of legs: 375 mm Nameplate: no

Condition: ready for operation (used), KUKA 1FK7105-5AY81-1YY3-Z S18 servo motor, serial number: YFVN50665138009, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bjdpfx Ahozw Sxwemsdh

Condition: refurbished (used), Used AGTOS three-phase motor with 11 kW power, flanged design. The motor was overhauled and tested in March 2026. Manufacturer: AGTOS Type: 1PC38041DA234CT0 Motor number: 15/253398/7 Motor type: Three-phase motor Power: 11 kW Bdsdpfx Ajzuf U Hohmsh Rated speed: 2955 rpm Rated voltage: 400 / 690 V Rated current: 19.6 / 11.3 A Frequency: 50 Hz Power factor cos φ: 0.89 Rated efficiency: 91.2 % Efficiency class: IE3 Frame size: 160M Design: B5 Protection class: IP55 Insulation class: F Operating mode: S1 Number of poles: 2 Weight: 84 kg Bearing, drive end: 6211-2ZC3 Bearing, non-drive end: 6309-2ZC3 Lubricant: Unirex N3 Condition: used, overhauled and tested Overhaul: March 2026

Condition: used, Year of construction: 2002, machine/vehicle number: 0104-260033, JAESPA Vertical Mitered Band Saw, V 380 DG/DGHS Series The machine is suitable for precise sawing and mitered cuts and is equipped with a hydraulic system and a coolant supply. Technical Specifications: Saw motor: 2.2 kW Hydraulic pump: 0.37 kW Coolant pump: 0.18 kW Bandsaw speed: 17–100 m/min Saw band dimensions: 4,250 × 34 × 1.1 mm Bedpfxozuaxmo Ahmodh Workpiece support height: 1,000 mm Coolant tank: 50 liters

Condition: used, Year of construction: 1995, operating hours: 37,000 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: crane, low noise, Well-maintained Wolf sorting truck. Bsdpfozwd Dxox Ahmsdh Being replaced by a new Baljer & Zembrod unit. Epsilon E380 crane. Concrete weights will be removed.

Condition: used, mileage: 422,257 km, power: 279 kW (379.33 HP), first registration: 09/2014, fuel type: diesel, tire size: 315/80r22,5, axle configuration: 6x4, wheelbase: 5,200 mm, fuel: diesel, color: orange, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 800 mm, Year of construction: 2014, Equipment: air conditioning, crane, electric window regulation, Drivetrain Drive: Wheel Make of engine: Renault Bdedpeywu E Asfx Ahmsh Axle configuration Tyre size: 315/80r22,5 Suspension: leaf suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 15.880 kg Carrying capacity: 10.120 kg GVW: 26.000 kg Functional Mast: telescopic (4 parts) Make of bodywork: HIAB Xs 211 hiduo

Condition: used, mileage: 228,679 km, power: 279 kW (379.33 HP), first registration: 04/2005, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro3, Equipment: air conditioning, * Volvo FM 12 380R 6x1 * Refuse Collection Vehicle * 3-axle * Manual transmission * Front leaf suspension * Rear air suspension * Lift and trailing axle * VIN: YV2J4CMC44A586206 * Engine type: D12D380 * kW: 279 * Euro 3 * Displacement: 3580 ccm * Unladen weight: 13,640 kg * Gross weight: 26,000 kg * Payload: 12,285 kg * Wheelbase: 3500 / 1370 mm * Vehicle length: 8,650 mm * Vehicle width: 2,500 mm * Vehicle height: 3,580 mm * Synchronizer defective * 1st / 4th gear do not always engage * Price net * All information without guarantee Bodpfx Ahsm Eyguomjdh Tel./WhatsApp:

Condition: used, Year of construction: 1987, Uncoiler manufactured by DREHER, type 2380 F-FPS. Press force approximately --- tons. Year of manufacture 1994. Summary provided – a full technical translation will follow if required for this lot. Bdodpfx Ahszynmvsmeh

Year of construction: 2012, condition: like new (used), machine/vehicle number: 6719-03-015, The machine has been designed and built to cut fabrics and leather materials by means of blade cutting tools and for milling of solid materials. The machine consists of a worktop with built-in suction system to keep the material firmly in place during cutting operations with the tool. Bdjdoha Nxcepfx Ahmjh The operator can upload externally made drawings on the machine; alternatively, he can realize the drawing directly using the computer the machine is provided with. The machine is for industrial use only

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, working width: 380 mm, area performance: 1,500 m²/h, overall weight: 80 kg, warranty duration: 12 months, water tank capacity: 22 l, HAKO SCRUBMASTER B12 TB380 SCRUBBER NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) NEW Squeegee with oil-resistant rubbers Manufactured in 2022 380mm cleaning head (TB380) equipped with a new medium-hard disc brush, ensuring power on any surface Bdodpfx Ajzy H Dashmsh New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products The device is equipped with a new drain hose switch and a new suction hose A new suction turbine ensures powerful water extraction from the squeegee Each device is photographed by us; you are purchasing the exact machine shown TECHNICAL DATA: Working width (mm): 380 Squeegee width (mm): 470 Clean water capacity (m²/h): 1,500 Number of brushes (pcs): 1 Clean water capacity (l): 16 Dirty water tank capacity (l): 22 Weight without batteries (kg): 40 Weight ready to use (kg): 80 Power (kW): 0.54 INCLUDED: NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) NEW suction bar with oil-resistant rubbers NEW 24V 250W suction turbine NEW disc brush - medium hardness NEW drain hose NEW suction hose 5 liter Tenzi Normal liquid - FREE KEY FEATURES: 16 liter tank capacity allows for a large amount of The cleaning fluid is easy to clean, so you don't have to frequently interrupt your work to refill it. The machine's design makes it highly maneuverable. A small turning radius also allows for use in passages and alleys. The parabolic squeegee beam ensures precise suction from the cleaned surface. The large working width (380 mm) ensures high surface coverage. The easy-to-read and convenient control panel.

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, working width: 380 mm, area performance: 1,500 m²/h, overall weight: 80 kg, warranty duration: 12 months, water tank capacity: 22 l, HAKO SCRUBMASTER B12 TB380 Scrubber-Dryer NEW Sonnenschein GF 12 025V gel batteries (2x) Year of manufacture: 2023 NEW squeegee assembly with new oil-resistant blades 380mm cleaning head (TB380) equipped with a new medium-stiffness disc brush, suitable for all surface types New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Equipped with a new, durable drain hose and a new suction hose New vacuum motor ensures high water suction power from the squeegee Each unit we offer features individually taken photos; you are buying the exact machine shown TECHNICAL DATA: Working width (mm): 380 Squeegee width (mm): 470 Coverage (m²/h): 1,500 Number of brushes: 1 Fresh water tank capacity (l): 16 Dirty water tank capacity (l): 22 Weight without batteries (kg): 40 Weight ready for operation (kg): 80 Power (kW): 0.54 INCLUDED: NEW Sonnenschein GF 12 025V gel batteries (2x) NEW squeegee assembly with new oil-resistant blades NEW 24V 250W vacuum motor NEW disc brush – medium stiffness NEW drain hose NEW suction hose Squeegee assembly with new... oil-resistant rubber components Tenzi Normal fluid (5 liters) – FREE KEY FEATURES: The 16-liter tank holds a large volume of cleaning solution, minimizing the need for frequent work interruptions to refill it. Its design makes the machine highly maneuverable; a tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough extraction of the solution from the cleaned surface. The wide working width (380 mm) ensures high area coverage. Bjdpfxjzz N Sis Ahmjdh The control panel is clear and intuitive to operate.

Condition: good (used), Year of construction: 2008, For sale is an injection molding machine from Krauss Maffei, type KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Year of manufacture: 2008 Extended tie bars Pneumatic nozzle shut-off Bdsdpeibyatjfx Ahmsh 2x hydraulic core pull 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1100 kN Mold opening force: 70 kN Euromap63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-end wrench Declaration of conformity for the complete control cabinet Certificate USB memory stick Ejector coupling – mechanical, included in the control cabinet All prices are plus VAT. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, but affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.