Used Pepperl+Fuchs Trd-G100-Fn2 for sale (157)

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Nlsdpfx Asxwhw Ajkujb Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW Nlodpfxsxc Eits Akueb

Condition: good (used), Screws, hexagon head screws, socket head cap screws, Allen head screws Nedpfsb A R Udex Akuslb -various sizes - various grades: 4.6/5.6/8.8 -various manufacturers: Fuchs, Würth, Sisma, FS -Euro pallet: 1 -Weight including packaging: 340 kg

Condition: new, Year of construction: 2023, functionality: fully functional, We are selling a new Weishaupt dual-fuel burner -mu Type WM-GL20/4-A with digital combustion manager WFM This unit was purchased as a backup but has never been used and is still in its original packaging. Version ZM-R-3LN (SuperLowNOx) Nlodpfx Aoww Taxjkuob Performance range (Natural Gas) 300 - 2450 kW Performance range (Heating Oil EL) 350 - 2450 kW Fully automatic operation for both oil and gas, either sliding/two-stage or modulating depending on the type of output control. Modulation range on the gas side up to 1:8 possible. Modulation range on the oil side up to 1:5 possible. Designed for burning EL heating oil according to DIN 51603 and natural gas as per DIN DVGW specifications, with the following components: - Burner housing - Blower with three-phase motor - Integrated speed control module for connection to a frequency converter (included) - Combustion air regulation with actuator - Fuel system consisting of a high-pressure gear pump with pressure control valve, solenoid valves as quick shut-off devices, nozzle assembly, and nozzle - Magnetic coupling for deactivating the oil pump during gas operation - Mixing device consisting of burner head and diffuser plate, continuously adjustable for optimal combustion results - Ignition system consisting of: high-voltage ignition transformer, ignition cable with plug connection, and ignition electrodes - Combustion manager for controlling all burner functions and power adjustment via electronic compound control - Suitable for continuous operation in accordance with TRD 411 and 412 - Flame monitoring by UV cell Digital Combustion Management: With the combustion managers W-FM 100 and W-FM 200*, operation of a combustion system becomes more convenient and secure. All key functions, such as fuel and air supply or flame monitoring, are recorded and controlled with digital precision. The aim is to optimize operating processes, maximize efficiency, and minimize emissions. Thanks to digital combustion management, such optimization can now be achieved with limited effort. Installation and maintenance are even significantly easier than with conventional technology. For example, a separate control panel for burner management is no longer necessary. Additionally, remote control, remote diagnostics, and external monitoring of the system are possible. This further increases safety and convenience for the operator.

Condition: used, mileage: 427,660 km, power: 205 kW (278.72 HP), first registration: 11/2003, fuel type: diesel, empty load weight: 10,520 kg, maximum load weight: 7,480 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,900 mm, next inspection (TÜV): 12/2025, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,420 mm, loading space height: 600 mm, front tire size: 385/65R22.5, rear tire size: 315/80R22.5, Equipment: ABS, additional headlights, all wheel drive, cabin, central locking, crane, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. Steel superstructure, registration as a motor home, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, radio, cruise control, 12 switch panel, ABS (anti-lock braking system), traction control (ASR), constant throttle, vertical exhaust, differential lock, fog lights, high beam headlights, leaf suspension, tow hitch with air, light, and hydraulic connections, low-noise G1, winter service equipment, pendulum tailgates, crane mounted behind cabin, emergency stop, foldable, radio remote control, 2x hydraulic extensions, yellow environmental badge. Wheelbase: 3,900 mm. Body: Meiller three-way tipper with Hiab 085-2 crane with grab control, 2 hydraulic extensions and radio remote control. In winter service configuration: 21.5 t GVW, G100-12/10.0-0.82 transmission, PTO intermediate shaft MB 2c, Meiller 6-piston type 265, winter service package, heated windscreen. Crane capacity: 2.0 m = 4 t, 7.4 m = 1.12 t. Nledpfevmhuqox Akujb Loading height approx. 1,570 mm! Approx. €7,000 invested in paint and technical upgrades. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to changes, prior sale and errors!

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: Kühlmitteleinrichtung, Coolant system for cooling lubricant RUEZ coolant tank with integrated sludge scraper, chip conveyor - Coolant cleaning system for cooling lubricant - Including two-part RUEZ lamella separator. - Including RUEZ safety sump in accordance with WHG with 100% collection space - Including clean tank & RUEZ magnetic roller filter Nsdpfx Astwpttokuelb - Year of construction 2022, unused & as good as new - RAL 7035 light gray - Superstructure for chip cart - No belt filter, sediment system - Available immediately - Price VB Description Coolant system: - Capacity approx. 34,720l - Filling volume approx. 32,710l - Useful volume approx. 22,020l + approx. 6,017l (clean tank) - L/W/H approx. 7,341mm/2,800mm/2,000mm - Tank walls 4mm/S235JRG2 - Walk-on, split tank cover - Tank supports approx. 100mm - Level indicator OWE 2/C as leakage protection - Inlet/distributor with strainer basket - 2 supply pumps - Type: NB100-25/4-15kW - 2000 l/min at 2.1 bar - Pipe - DN150/125 - Return line - DN 100 - PN 16 - RUEZ float switch RB 200 - 3 / 1900 - Level indicator FTL31-CA4M2AAWBJ as overfill protection (clean tank) - RUEZ control unit - Siemens TIA - SPS: SIMATIC S7-1200, CPU 1215C - Visualization: KTP700 control panel - Indicator light red-yellow-green

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: MHB5202500000156, Scrap Grab for Terex Fuchs, Sennebogen, Liebherr Nodpfx Aoxryn Askujlb 5 Tinned Model 500 Liters Capacity