Used Plansee Sputter Target for sale (202)

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device Nwedsxab Tvjpfx Adrei - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - Nwodoycxgmopfx Adrsi ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: good (used), Year of construction: 2016, In this offer you will acquire a used server system "NetApp FAS8040" in a good condition. Item for sale: 1 NetApp FAS8040 with the following equipment: - 64GB ECC memory - NetApp c-DOT 64bit operating system Nwedpfxsiinawo Adrji - Scalable up to 5760TB total capacity - Max. Aggregate size 324TB - SnapShot functionality - 2x power supply (redundant 1+1 each, hot-plug) - Fan (Redundant, Hot-plug) - Mounting rails for 19" rack - Expandable up to 720 hard disks Onboard: - 2x 1Gbit Service Processor (SP9 for management, Ethernet ports RJ45 - 2x 100Mbit private management ports RJ45 - 8x 10/100/1000 Mbit Ethernet ports - 8x 10Gbit Ethernet ports LC - 8x Unified Target Adapter (UTA2) 10Gbit Ethernet ports LC - 8x 6Gbit SAS ports QSFP - 8 PCIe expansion slots Software / Licenses c-DOT 9.X Condition: This is a used unit and may show signs of use (minor scratches or yellowing). The device has been tested for function. Packing and Shipping: You are welcome to look at the device during our business hours. Please make an appointment for this! A seaworthy packaging and worldwide shipping on request possible! Before shipping or pickup, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: good (used), Year of construction: 2016, In this offer you will acquire a used server system "NetApp FAS8040" including 3 storage shelves in a good condition. Object of sale: 1 NetApp FAS8040 with the following equipment: - 64GB ECC memory - NetApp c-DOT 64bit operating system - Scalable up to 5760TB total capacity - Max. Aggregate size 324TB - SnapShot functionality - 2x power supply (redundant 1+1 each, hot-plug) - Fan (Redundant, Hot-plug) - Mounting rails for 19" rack - Expandable up to 720 hard disks Onboard: - 2x 1Gbit Service Processor (SP9 for management, Ethernet ports RJ45 - 2x 100Mbit private management ports RJ45 - 8x 10/100/1000 Mbit Ethernet ports - 8x 10Gbit Ethernet ports LC - 8x Unified Target Adapter (UTA2) 10Gbit Ethernet ports LC - 8x 6Gbit SAS ports QSFP - 8 PCIe expansion slots Software / Licenses c-DOT 9.X Njdpeiindlsfx Adrjwi 2x DS4246 Shelf - 24 hard disk bays 3,5" - 20x 4TB NL-SAS hard disks, hot swap - 4x 400GB SSD hard disks, hot swap - Mounting rails for 19" cabinet - 2x IOM6 6GBit SAS module (redundant, hot swap) 1x DS2246 shelf - 24 hard disk bays 2,5" - 24x 1.2TB at 10k SAS hard disks, hot swap - 2x power supply, redundant - 2x IOM6 6GBit SAS Module (Redundant, Hot-swap) Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function. Packing and shipping: You are welcome to look at the device during our business hours. Please make an appointment for this! A seaworthy packaging and worldwide shipping on request possible! Before shipping or pickup, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 600 kg, workpiece diameter (max.): 40 mm, Round Log Profiling Machine | Log Milling Machine | Log Shaper For sale is a round log profiling machine designed for processing tree trunks. This machine – also known as a round log milling machine or log shaper – enables the production of round log components for log home construction, landscaping, and creative woodworking projects. Description A round log profiling machine for machining tree trunks, ideal for log home construction and demanding timber structures, is offered for sale. The machine performs precise processing of round logs in several coordinated work steps, resulting in perfectly fitting components for natural log houses, log cabins, or structural timber projects. Processing Steps The machine performs several operations in a single process: - Debarking Removal of bark and preparation of the log. - Shaping Uniform rounding and contouring of the log. - Contour and Longitudinal Milling Milling of profiles and contours along the entire length. - Milling of Installation Grooves Thermal barrier / moon groove for precision log house assembly. - Cutting Notching for sockets or joints at 90-degree angles. - Finishing A complete log is processed in approximately 30–40 minutes. Applications - Log house construction - Natural log buildings - Round log structures - Timber constructions Advantages - Multiple work steps in a single machine - Precise processing along the entire log length - Ideal for small to medium production volumes - Electric drive systems Target Users - Log home builders - Timber framers - Timber construction companies - Round log specialists Accessories - Spare cutterhead - Knife set - Knife sharpening machine - Spare parts kit Inspection Inspection possible by appointment. Nwjdpfxeyr E Ezj Adrei Further information and technical details available on request. The sales price refers to the complete machine including accessories! Keywords: Round log milling machine, log shaper, round log machine, round log profiling machine, log milling machine, timber log milling machine, round log profiler, round log processing machine, log house machine, round log processing unit, post milling machine.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts Nwsdpox E Rdwjfx Adrsi - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, Raptor Hypersonic Spray Applicator The spray applicator is used to fill surface shrinkage/damage in different materials, for example, it is perfect for the regeneration of aluminum rims. With this technology we can fill the gaps without heating the sputtered element. The surface after sputtering is suitable for grinding or turning and has no internal pores, which means that no craters form on the surface of the element after processing. Specification: Air pressure: 6 - 7 bar Minimum air consumption: 0.5 m³/min Power supply: 230 V Power consumption: 3300 W Nodpovx Ht Nefx Adrswi Tank capacity: 200 grams Weight: 8.5 kg Rim repair sprayer, surface filler, metal cavity filler, aluminum cavity filler, damage filler, rim repair, rim refurbishment, rim doctor, rim clinic, curb damage, FELGENMASTER, rim technology, rim broken, pothole and damage, corrosion damage, corrosion,

Condition: used, Year of construction: 1996, diameter / mm workpiece length / mm length / mm MITUTOYO SURFTEST SV-500 Roughness tester with OLZE measuring plate Size: 600 x 600 x 80mm Target µm: 16 Actual µm: 10,00 Own weight: 85kg Nsdpfx Astvm Smedrowi Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other items shown in the product images are not included in the delivery.

Year of construction: 2025, condition: new, Weigh checker with reject device to check if product meets target weight. - Specifications: belt width: 220mm; weight range: 5-999g; accuracy: +/- 1.5g. Nodpfx Aev Nm Nledrowi That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Weigh checker with reject device to check if product meets target weight. - Specifications: belt width: 330mm; weight range: 1-10kg; accuracy: +/- 3.5g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Nwjdpfsv Nm N Ejx Adrsi Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Checkweigher with reject device to check if product meets target weight. New version with data readout. - Specifications: belt width: 220mm; measuring area (weighing belt): L500xW220mm; weight range: 10-1000g; accuracy: +/- 0.1-3g; max. speed of the machine in neutral: 80 cycles/minute; power: 0.3kW, 220V, 1-phase; machine dimensions (mm) approx.: L2269xW574xH780(weighing belt); weight: 140kg. Nwedpfx Adev Nm Rcjrji Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Combination of Metal Detector and Weigh Checker. With two recect devices to check if product metallic impurities and/or meets target weight. - Specifications: stainless steel framework, weight range: 5-990g; detecting speed 0.2-0.75m/sec; detecting accuracy: FE from Ø 1.0mm, SUS from Ø 2.0mm; target weight accuracy: ± 0.5g; tunnel size WxH: 330x150mm; max. passing size WxH: 280x110mm; power: 220V/0.35kW, 50Hz/60Hz; dimensions and weight: L1700xW600xH900mm, 160/260kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nsdpfx Asv Nm Hwedrswi

Condition: new, Year of construction: 2025, Weigh checker with reject device to check if product meets target weight. - Specifications: belt width: 220mm; weight range: 1-10kg; accuracy: +/- 3.5g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Nwedpfx Aov Nm Nrjdrei Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Checkweigher to check if product meets target weight. 6 sorting stations with 2 way reject device, each. - Specifications: belt width: 220mm; weight range: 5-1000g; accuracy: +/- 0.3-3g; max. speed of the machine in neutral: 60 cycles/minute; power: 220V, 1-phase; machine dimensions (mm) approx.: L2459xW684xH780(weighing belt). Nodpfxjv Nm Rpj Adrjwi Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Weigh checker with reject device to check if product meets target weight. - Specifications: belt width: 330mm; weight range: 5-999g; accuracy: +/- 1.5g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Nwjdpfx Aev Nm Nxodrei Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Checkweigher with reject device to check if product meets target weight. New version with data readout. - Specifications: belt width: 220mm; measuring area (weighing belt): L500xW330mm; weight range: 10-10,000g; accuracy: +/- 1-4g; max. speed of the machine in neutral: 60 cycles/minute; power: 0.3kW, 220V, 1-phase; machine dimensions (mm) approx.: L2459xW684xH780(weighing belt); 180kg. Njdpov Nm Risfx Adrewi Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, operating hours: 54,000 h, machine/vehicle number: LC597, Used complete line for still wine - 8000 BPHTechnical Specifications & Performance DataThis used bottling line is engineered for reliable beverage production and downstream industrial packaging at up to 8,000 bph. The configuration integrates an MBF filling monoblock (2002) composed of a rinser, filler, and capper, specifically designed for straight cork (flush-to-mouth) application. The line further features a ROBINO & GALANDRINO POKER Z 6/8 (2002) capsuling and shrink-wrapping machine, followed by APE Impianti case handling and KOSME labeling technology. This setup offers robust performance for second-hand applications and flexible format management typical of glass and PET bottle operations.Production speed: 8,000 bottles per hourFilling Monoblock: MBF (Year 2002) – Rinser, Filler, CapperCapping System: Straight cork (flush-to-mouth / tappo raso)Capsuling/Shrinkage: ROBINO & GALANDRINO POKER Z 6/8 (Year 2002)Compatible formats: Typical case pack pattern includes 12 x 0.75L; additional formats manageable with change partsContainers: Designed for bottle handling; configuration suitable for Glass (cylindrical containers)Labeling modules: KOSME STAR 720 12T (cold glue) and KOSME EXTRA ADHESIVE 12T S3 E3 (self-adhesive)Labeling capabilities: Front, back, and neck label (collarino) applicationPackaging modules: APE FORMA 2000 (case erector), APE INCA 2010 (case packer), APE INSER 2001 (divider inserter)Electrical (MBF Monoblock): 380 V, 50 Hz; installed power 17 kWElectrical (Labelers): 400 V, 50 Hz; installed power 4 kW (STAR) and 8 kW (EXTRA ADHESIVE)Pneumatics (MBF): 0.6 MPa (6 bar); air consumption 200 Nl/1'Weights: 9,000 kg (MBF Monoblock), 2,650 kg (STAR 720 12T), 2,000 kg (EXTRA ADHESIVE 12T S3 E3)Compliance: CE-marked componentsAdvanced Automation & Control SystemsThe line leverages modular automation across filling, labeling, and case-handling stations for stable throughput. The MBF monoblock and Robino & Galandrino POKER Z work in synchronized sequence to ensure precise filling levels, hermetic straight cork sealing, and professional capsule finishing. The KOSME labeling units are configured for complex dress-out requirements, allowing for synchronized application of front, back, and neck labels. Operator-friendly controls on each module support quick setup and changeover. APE Impianti packaging modules provide synchronized motion and interlocked safety protections for downstream operations.Production Line Integration CapabilitiesThis production line is designed to operate inline with conveyors and accumulation to match the 8,000 bph target. The MBF filling core ensures hygienic processing, while the ROBINO & GALANDRINO POKER Z provides versatile capsule application immediately fol... Njdpjyh E Huefx Adrswi

Condition: like new (used), operating hours: 50 h, Open tube 160kV HR – High Resolution – W Target (4W) & Standard W target (10W) 1308 HR FP Detector (13x08cm) High & Medium Quality and Realtime modes Detector Tilt ± 60° 24” Ultrasharp monitor BGA & Area Void analysis Njdpfxsymmape Adrjwi Traceability package X-ray ‘ON’ hours ~45 hour Win10 PC Available for transport!

Condition: used, For inquiries regarding the attachment, Mr. Herden is available to assist you by phone. Holp VarioBucket / VL.112.400 / OQ60-5 / HARDOX / NEW / In Stock & Immediately Available Price: €4,410.00 net / €5,247.90 gross Nedpfx Aeyhylxedrowi - Suitable for excavators: 7 to 14 tons - Own weight approx.: 320 kg - SAE capacity: 400 liters - Ditching angle: 54° - Ditch bottom radius: 150 mm - The bucket is made entirely from HARDOX. Advantages of the Holp VarioBucket: - Large surface area - Robust design with high-quality materials - Minimal weight due to optimized triangular construction - Rounded bottom - Two working openings - Rectangular working opening - V-shaped - The VarioBucket impresses with high performance and precise operation. Its V-shaped opening enables targeted pouring and delivers very high trench clearing performance in drag operations. Wherever more speed and flexibility are needed for a variety of tasks, the VarioBucket delivers real added value on construction sites: it is faster, more adaptable and safer. We have many other Holp products in stock and available for immediate delivery! Mr. Herden (phone) is happy to assist you. Upon request, we will gladly provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles in stock, we are among the largest commercial vehicle dealers in Germany. We supply you with the complete range of Holp products! Errors and prior sale excepted! = More information = New: Yes Application: Construction Unladen weight: 320 kg Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (by phone) directly. Holp VarioBucket / VL.112.700 / CW20 CW30 CW40 / HARDOX / Wear Plates / NEW / in stock & immediately available Price: €6,045.00 net / €7,193.55 gross - Excavator weight class: 14 t – 25 t - Own weight approx.: 570 kg - SAE capacity: 700 liters - Ditching angle: 54° - Base radius: 150 mm - Includes wear plates - The bucket is manufactured entirely from HARDOX. Advantages of the Holp VarioBucket: - Large surface area - Robust design with premium materials - Minimal weight due to optimized triangular construction - Rounded bottom - Two working openings - Rectangular working opening - V-shaped - The VarioBucket stands out for its high performance and precise operation. The V-shaped opening enables targeted pouring, while offering very high trench cleaning performance when dragged. Wherever greater speed and flexibility are required for handling a variety of tasks, the VarioBucket delivers real benefits on the job site: it is faster, more adaptable, and safer. We have a wide range of other Holp products in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. On request, we can also provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. Njdpfx Adoyhylljrswi We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = More information = New: Yes Intended use: Construction Unladen weight: 570 kg Please contact Marius Herden for further information.

Year of construction: 2026, condition: new, Flexible cut to length lines for standard and mid-range production needs with customized capacity and width options. Bosporas Machinery is a manufacturer of coil processing lines, delivering high-performance and customized industrial solutions worldwide. Our standard and mid-range cut to length lines are designed for precise sheet production from coil with reliable performance, stable operation and flexible configurations. These systems are ideal for manufacturers looking for efficient solutions for medium gauge sheet processing. Available in different capacities and working ranges, the lines can be customized according to customer production targets, material specifications and factory layout requirements. Whether for new investments or production upgrades, Bosporas provides complete turnkey cut to length solutions with international project experience. ⚙️ AVAILABLE CONFIGURATIONS 2 mm | 1300 mm | 4 Ton Cut to Length Line 3 mm | 1500 mm | 15 Ton Cut to Length Line Custom capacities, widths and thickness ranges are available upon request. 📊 TECHNICAL RANGE Material Thickness: 2 – 3 mm Coil Width: 1300 - 1500 mm Coil Weight: 4 Ton – 15 Ton High precision sheet length cutting Stable continuous production performance 🔧 MAIN LINE COMPONENTS Depending on project requirements, the line may include: Hydraulic or Mechanical Decoiler Straightener / Leveler Unit Servo Feeding System Guillotine / Rotary / Hydraulic / Eccentric Mechanical Shear Nwsdpfxsy Dug Hj Adrei Conveyor Systems Automatic Stacking System Exit Table PLC & HMI Control System ⚙️ ENGINEERING FEATURES High cutting accuracy and repeatability Stable sheet flatness performance Heavy-duty machine construction Servo controlled feeding systems User-friendly automation interface Modular design for future upgrades Designed for industrial continuous operation ⚡ OPERATIONAL ADVANTAGES Flexible production for different sheet sizes Consistent cut quality Reduced labor and handling time Efficient material processing Turnkey project solutions Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Steel service centers Sheet metal distributors Construction materials production HVAC manufacturers White goods industry General metal processing companies 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar cut to length lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, layout drawings and technical details can be provided upon request.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: - Large cutting range with saw blade Ø 700 mm - Maximum profile width up to 530 mm, profile height up to 270 mm - Saw blade feed hydro-pneumatically adjustable from the outside - Radial feed movement from bottom to top - Saw motor drive power 7.5 kW - Infinitely variable blade speed adjustment - Metered spray unit - 2 vertical and horizontal clamping devices, each with pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually operated safety guard Technical data: - Drive: 7.5 kW - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg - Dimensions: H 1900 x W 1400 x D 1700 mm - Height with guard open: 2450 mm PD200-E-7 length measuring system - Usable as a stop as well as a pusher - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target length, actual length, and quantity Nwjdpfx Aex Eb Anodrsi - Positioning accuracy 0.1 mm/m - Piece counter for number of completed pieces / cuts

Year of construction: 2025, condition: new, Benefit from our hydraulic modules with integrated buffer tanks – the perfect solution for modern chilled water systems. The central buffer tank enables stable system performance, reduces pressure fluctuations, and improves the availability of your system. Example configuration: Hydraulic module with a 5000-liter buffer tank Integrated dual pump for redundant operation or increased flow rate Hydraulic separation between primary and secondary circuits Targeted pressure and temperature control to optimize overall efficiency Space-saving housing design for easy integration into the existing process. Njdjhtfhaspfx Adrowi We would be happy to prepare a customized offer for you, including sizing and delivery time.

Year of construction: 2026, condition: new, Complete turnkey production lines for slitting, cut to length, combined slitting-cut to length and press feeding systems. Bosporas Machinery is a manufacturer of coil processing and press feeding systems, delivering high-performance and customized industrial solutions worldwide. We provide complete turnkey coil processing lines designed for modern sheet metal production facilities. Our solutions cover the full process from coil loading and feeding to cutting, recoiling, stacking and automation. Whether for new factory investments, capacity expansion or modernization projects, Bosporas offers reliable, efficient and customized production lines tailored to your material specifications, production targets and factory layout. From standalone machines to fully integrated automatic systems, we deliver complete engineering solutions with international project experience. ⚙️ AVAILABLE SOLUTIONS Coil Slitting Lines: For precise longitudinal cutting of coils into narrower strips with recoiling solutions. Cut to Length Lines: For accurate sheet cutting with stacking systems for flat sheet production. Combined Slitting & Cut to Length Lines: Flexible systems capable of both slitting coils and producing cut sheets in one integrated line. Compact Press Feeding Systems: Integrated decoiler, straightener and servo feeder solutions for press automation and stamping operations. 🔧 LINE CONFIGURATION Depending on the project, production lines may include: Hydraulic Coil Loading Car Decoiler / Uncoiler Systems Straightener / Leveler Units Servo Feeder Systems Slitting Head Rotary / Hydraulic / Mechanical Shear Scrap Winder Systems Tension & Separator Units Recoiler Systems Automatic Stacking Systems Conveyor Systems PLC & HMI Automation Safety Systems & CE Compliance Options ⚙️ ENGINEERING FEATURES Custom machine design according to customer requirements Nedpfx Ajy A Ia Dodrjwi High precision processing performance Heavy-duty machine construction Servo-controlled feeding and automation Modular structure for future upgrades User-friendly control systems Reliable operation for continuous industrial production ⚡ OPERATIONAL ADVANTAGES Complete turnkey production solutions Single supplier for the full project Reduced labor and production costs High efficiency and consistent product quality Fast installation and commissioning support Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Steel service centers Sheet metal processing companies Automotive suppliers White goods industry Construction materials production HVAC manufacturers Metal furniture and component production General industrial manufacturing 🧩 OPTIONAL CONFIGURATIONS Customized line capacities Different thickness and width ranges Full automation packages Factory layout engineering Remote support solutions Spare parts and training packages 📸 REFERENCE PROJECTS You can see and review our completed (manufactured and installed) projects on our Youtube channel. For machine videos and references, please visit our YouTube channel. You can search on Youtube as Bosporas Makina / Ayika Group.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, measuring range X-axis: 2,500 mm, measuring range Y-axis: 100 mm, measuring range Z-axis: 65 mm, Stock machine – subject to prior sale! Tactile 3-axis measuring table for fast and precise measurement of flat workpieces Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Operation | Control | Operating system: 15" touchscreen | HECHT DesQ II software | Windows Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Accuracy: Absolute accuracy X/Y +/- 0.10 mm Nwsdpfxsw Ew Dqj Adrei Typical repeat accuracy X/Y +/- 0.02 mm Relative accuracy Z +/- 0.05 mm Typical repeat accuracy Z +/- 0.02 mm Resolution 0.01 mm Measurement capabilities: ⦁ Length, width, thickness (relative) ⦁ X/Y distances ⦁ Squareness ⦁ Parallelism ⦁ X/Y hole positions ⦁ Bore diameter ⦁ Bore depth (relative) ⦁ Radii / diameters ⦁ Groove position ⦁ Groove depth (relative) ⦁ Rebating position ⦁ Rebating depth (relative) ⦁ X/Y/Z position of horizontal boreholes ⦁ Depth of horizontal boreholes (relative) Measuring program: 8-point measurement for rectangular parts (e.g. rectangle, parallelogram, or trapezoid) Process: 8 points of the workpiece are scanned (two points per edge at each corner) Result: Displays 2 x length (top, bottom), 2 x width (right, left), 4 x angles Report: When nominal values and tolerances are entered, an actual/target comparison is generated and deviations are displayed in tabular form. Results can be saved as PDF (report) or in an SQL database for statistical analysis. Inspection and documentation of manufacturing status possible during the production process: after cutting, after edge-banding, or after drilling, depending on value creation. Vacuum system (Venturi principle): 6 vacuum suction cups integrated in the measuring field secure the workpiece during measurement. Technical data: Dimensions (L x W x H): approx. 2,950 mm x 1,050 mm x 2,090 mm Weight: approx. 450 kg Power supply: 230 V Compressed air connection: 6 bar Air consumption: 90 l/min Operation/control: 15" touchscreen HECHT DesQ II software Windows 10