Used Pneumatic Assembly Press for sale (20,955)

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional * Dcodpsu Nfm Tsfx Adron

Condition: used, Technical details: pressure: 80 t dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm Djdpfx Aou Nfnwodrecn ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m - Press with two ram with 30 t + 80 t - foot control - documentation *

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. Dcodpfxeu Nfn Rj Adren *

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm Dcedpfx Adju Nfp Ijrjn height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. Dsdpju Nfwlefx Adrocn *

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: E16352-1, Avermann AVOS SP-12 stationary baling press | Overhauled in 2023 | Not used since For sale: Avermann AVOS SP-12 stationary baling press, manufactured in 2010. This robust Avermann baling press was overhauled by us in 2023 and has not been used since. This makes it an interesting machine for those looking for a well-maintained used baling press that can be put back into operation immediately. The AVOS SP-12 is a robust baling press, suitable for compacting various waste streams and ideally applicable in industries such as manufacturing, logistics, production companies, and waste processing. Technical specifications: Brand: Avermann Type: AVOS SP-12 Year of manufacture: 2010 Serial number: E16352-1 Power: 7.5 kW Power supply: 3 x 400 V + N + PE, 50 Hz Fuse rating: 32 A Maximum working pressure: 200 bar Protection class: IP55 Integrated hydraulic press system Large feed opening Suitable for transport with a hooklift Special features: The machine was overhauled by us in 2023. After this overhaul, the baling press was not used and has remained idle since. Visually, the machine is in good, used condition. There are, of course, some minor signs of wear that are consistent with the age and type of machine. A great opportunity for companies looking for a professional Avermann baling press at a more attractive investment than a new one. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Dcsdpfx Adsz Eqr Aeren Keywords: Avermann, AVOS, SP-12, baling press, waste compactor, container press, waste compaction, recycling, compactor, press system, self-compacting container.

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s Dcedpfxovc Awxj Adron ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m Dedpfx Asvt Nvpedrecn dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: new, Year of construction: 2026, machine/vehicle number: ST-80, functionality: fully functional, pressing force: 80 t, stroke length: 450 mm, operating speed: 4 mm/s, reverse speed: 5 mm/s, table width: 1,000 mm, table length: 1,750 mm, table height: 800 mm, total length: 2,000 mm, total width: 1,750 mm, total height: 1,750 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Model: ST-80 STANDARD DESCRIPTION: Dsdpjz E Hb Hjfx Adrecn We have designed the ST series of motorized hydraulic presses with a movable gantry and adjustable ram, offering a range of three different capacities from 80 to 150 tons. Specifically designed for straightening welded structures, as well as plates cut by oxy-fuel or laser. The design facilitates easy loading and unloading of large volumes: parts, plates, or structures. It provides access to various pressure points without having to reposition the workpiece, thanks to the lateral movement of the cylinder and the longitudinal travel of the gantry. STRUCTURE AND TABLES: The ST series hydraulic presses feature an electro-welded frame manufactured exclusively from S355JR steel. The frame is stress-relieved and precision-machined after welding to ensure perfect parallelism and accuracy. All structural calculations and design are performed using finite element software. As a result, we always guarantee our high standards of precision and quality. The gantry provides longitudinal movement. CYLINDER AND HYDRAULIC UNIT: Double-acting cylinder with honed barrel, chrome-plated piston, and maintenance-free anti-wear guides. Cylinder operation via a lever hydraulic valve. Equipped with a removable pressure pad to protect the piston. Motorized hydraulic unit with two speeds and automatic switch-off of the fast approach speed at working pressure, including a pressure relief valve. ELECTRICAL SYSTEM AND SAFETY: Electrical circuit includes a motor protection switch with emergency stop. Supplied with a glycerin-filled pressure gauge (reading in tons) and hydraulic oil. Complies with all essential health and safety requirements according to CE standards. Delivered with an operating manual. MODEL ST-80 Capacity (t) 80 Motor Power (kW) 3 Working Speed (mm/s) 3.8 Approach Speed (mm/s) -- Return Speed (mm/s) 4.7 Max. Pressure (bar) 315 Piston Stroke – J (mm) 450 Lower Table (mm) 1,000 x 1,750 Ram Travel – C (mm) 730 Gantry Travel – D (mm) 1,100 Front Opening – A (mm) 1,050 Vertical Opening – B (mm) 500 Working Height – E (mm) 800 Overall Width – G (mm) 2,000 Overall Depth – H (mm) 1,750 Overall Height – I (mm) 2,250 Weight (kg) 1,700

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Dsdpfxof Rt Iro Adrecn

Condition: used, Year of construction: 2018, Used, working condition unit. Additional details including pricing upon request. Dcsdpfx Adjz Hlhhsrsn

Condition: good (used), Year of construction: 2019, Schuler BEUTLER press Dcsdpfxez Hbq Ej Adron Type: MC 4000 Year of manufacture: 2017 Pressing force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Installed height: 750 mm Table area: 3,000 x 1,400 mm Ram area: 3,000 x 1,300 mm Press weight: 72,000 kg including GSW Schwabe strip feed line Strip width: 80 - 500 mm Strip thickness: 0.8 - 4.0 mm Coil capacity: 5,000 kg

Condition: good (used), Year of construction: 1990, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 63 t, table width: 800 mm, table length: 630 mm, total length: 17,900 mm, total width: 14,250 mm, total height: 25,500 mm, overall weight: 5,850 kg, height adjustment type: mechanical, stroke adjustment: 105 mm, Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. Dcedpfotzxdzex Adron It is possible to make a visual inspection and check the machine in operation.

Condition: good (used), Year of construction: 2011, Condition: used, in working condition The robust frame construction and press beams ensure precise frame assembly and gluing. The press guarantees accurate squareness while preventing frame distortion or warping. Thanks to the long stroke of the hydraulic cylinders, the lower beam and the clamping jaws require less frequent adjustment. The lower beam features automatic lifting and locking. Technical Specifications • Maximum frame size: 3000 × 2000 mm • Minimum frame size: 250 × 340 mm • Hydraulic pump power: 3 kW • Maximum total pressing force on the horizontal and vertical beams: 19 tonnes Dsdpjzlyv Tjfx Adrocn • Vertical hydraulic cylinder stroke: 1100 mm • Horizontal hydraulic cylinder stroke: 1200 mm • Lower beam adjustable to three heights: 380, 680 and 980 mm • Adjustable vertical and horizontal pressing pressure • Two horizontal fences with quick-adjustment system • Horizontal and vertical movements are controlled by lever-operated valves mounted on the machine frame • CE-compliant design • Pendant push-button control unit Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: ready for operation (used), Year of construction: 2026, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included Dcsdsztfbwopfx Adrsn -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Condition: used, Year of construction: 1992, tube diameter 48 mm bending radius max. 90 ° total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,8 x 0,8 x 1,2 m Electro-hydraulic mandrel tube bending machine with - four-position bending angle pre-selection - bending tools: 48.3; 42.4; 33.7; 1/2" Dodpfez Dkyqex Adrjcn - mandrel length: 4500 mm

Condition: used, pressure 100 t stroke 400 mm daylight longitudinal/sideways 1010 x 300 mm Motor output 4,0 kW liter capacity 11,0 l dayligth 900 mm table surface area 1010 x 560 mm Dsdpfx Adovu E Uwerecn feed down 4,8 mm/sec feed up 7,5 mm/sec weight of the machine ca. 0,9 t dimensions 1320 x 900 x 2450 mm High-quality hydraulic press can be operated manually or by motor. Cylinders can be moved sideways. Safety valve at cylinder end position. CE marked

Condition: new, Year of construction: 2025, type of input current: AC, power: 5.5 kW (7.48 HP), input voltage: 400 V, Pelleting plant for a wide variety of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, maize straw ....) Animal feed ..... This is a complete system (compact system), which is built on a base frame and consists of the following components: Storage container for raw material 1.5 m³, incl. agitator Inclined mixer for raw material incl. level sensors and fully automatic moisture metering Dosing screw for optimum material feed to the press (speed-controlled) Dsdpfx Aoud Nx Hsdrscn Press 5.5 kW, with horizontal round die, discharge chute with dust separation, temperature monitoring Conveyor belt for pellet removal, discharge height approx. 2.0 m The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! Price excl. VAT! The price includes operator and service training (in A-4352 Klam)! Attention, some of the pictures do not correspond to the actual system ( are example pictures ) !!!!! Attention!!! we are constantly looking for sales and service partners (worldwide) !!!!!

Year of construction: 1992, condition: used, Pressing force 40 t Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms safety distance 176 mm Condition: used Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional Dcsdpfxezdvcaj Adrsn information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: repair required (used), Year of construction: 1993, functionality: not functional, input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, For sale is a robust hydraulic EHT bending press, type EHPS 15-35, manufactured in 1993. The machine comes from an industrial setting and, after repair, is ideal for sheet metal processing, metalworking, metal construction, contract manufacturing, or as a production machine for medium to heavy bending operations. The bending press has a working length of 3,550 mm and a pressing force of 1,500 kN, or approximately 150 tons. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive set of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot currently be performed. The error must be bypassed or professionally repaired. After this error is resolved, the machine should be fully operational again. Therefore, it is being sold explicitly as a used industrial machine in need of repair for restoration purposes. The machine is in used condition, with signs of wear consistent with its age. There are signs of use, paint damage, and dirt, as shown in the pictures. The control cabinet, the control system, the tools, and the machine components are documented in the photos. An on-site inspection is possible and highly recommended, subject to prior arrangement. A functional test is only possible to a limited extent, as there is currently an error during the initialization of the stops. Equipment / Scope of delivery • Hydraulic CNC bending press EHT EHPS 15-35 • Cybelec DNC 880 control system • Existing upper tools / punches • Existing lower tools / dies • Special tools included • Front supports / material supports Dcedpfxoz E U Dpj Adren • Foot switch • Side protection areas / safety guards • Robust EHT industrial design • Large working length of 3,550 mm • Pressing force approx. 150 tons Inspection / Collection The machine is located in an industrial hall and can be inspected by appointment. Disassembly, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be provided if necessary. Sales note Preferably sold to commercial businesses. No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been provided to the best of our knowledge based on the nameplates and available information.

Condition: reconditioned (used), 20 cubic meter skip loader container with usable volume for roll-off tippers Beringer BPx5 Reconditioned, inspected, and serviced Two-sided mounting Side-hinged discharge door Ramp operation possible Dcjdpfowifmzox Adron Machines are reconditioned, inspected, serviced, and repainted in the desired standard RAL color. We will gladly prepare an offer including delivery.

Condition: excellent (used), Year of construction: 2020, operating hours: 41 h, functionality: fully functional, Baling press HSM V-Press 825 Plus Pro Dedpfx Asz H Saqsdrocn Year of manufacture: 2020 Operating hours: 41 hours Bale counter: 145 bales Machine is fully functional, inspected, and maintained. Technical data: Width x Depth x Height: 1700 x 1248 x 2370 mm Bale length x Bale width x Bale height: 1200 x 780 x 700 mm Width x Height of the feed opening: 1195 x 540 mm Weight: 1210 kg Type of consumable material: Strapping band Material to be baled: Film, mixed paper, cardboard, stamping waste, clothing Pressing force: 250 kN Voltage: 400 V / 50 Hz Power: 4.0 kW Rated current: 9.0 AMP

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_7, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Dcjdpjz H Txujfx Adrsn Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_20250010, functionality: fully functional, operating hours: 300 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Djdoz H Tx Ijpfx Adrocn Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 80 t, stroke length: 120 mm, table length: 2,500 mm, throat depth: 250 mm, distance table to ram: 385 mm, clearance between the columns: 2,000 mm, oil tank capacity: 160 l, total length: 2,600 mm, total width: 1,450 mm, total height: 2,300 mm, overall weight: 4,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic CNC Servo Press Brake MTP 80X2500 with MTP-3212 Controller – In Stock The MTP 80X2500 is a hydraulic CNC servo press brake designed for accurate and efficient sheet-metal bending. The machine delivers a pressing force of 80 tonnes and offers a maximum working length of 2,500 mm. It is suitable for processing sheet metal up to 4 mm thick. The machine is equipped with two controlled axes: • X-axis – servo-controlled back-gauge positioning • Y-axis – servo-controlled ram movement The MTP-3212 CNC controller features a large colour touchscreen and a clear, intuitive operating menu. Its software automatically calculates the required bending angle, helping simplify machine setup and improve production efficiency. The controller can store data for up to 40 different punch types. The machine is fitted with an AMADA-style quick-clamping system, enabling fast and convenient tool changes. Two front material supports are included. High-quality components ensure reliable operation and a long service life. The hydraulic system uses a renowned German Rexroth valve, while the electrical system incorporates Schneider components. Safety components are supplied by Omron and Schneider. Steel hydraulic connections help minimize the risk of leakage. For comfortable operation, the press brake is equipped with a mobile control unit and a controller mounted on an adjustable arm. Integrated LED lighting provides excellent visibility throughout the working area. The machine includes extensive safety equipment, such as side guards, a rear safety gate, easily accessible emergency-stop switches and a safety light barrier. The light barrier helps prevent accidental access to the area between the punch and die during operation. An English-language operating manual and a CE declaration of conformity are included. Technical support is also available to assist with tooling selection, material selection, bending sequences and the configuration of suitable operating parameters. Technical specifications: • Pressing force: 80 t • Maximum working length: 2,500 mm • Maximum sheet thickness: 4 mm • Controlled axes: X and Y • Distance between columns: 2,000 mm • Throat depth: 250 mm • Ram stroke: 120 mm • Maximum opening height: 385 mm • Back-gauge travel: 600 mm • Motor power: 5.5 kW • Overall weight: 4,800 kg • Dimensions (L × W × H): 2,600 × 1,450 × 2,300 mm • Front material supports: 2 • Punch clamping: AMADA-style quick-clamping system Dcjdpfxjzrl Nlj Adren • CNC controller: MTP-3212 • Safety light barrier: Yes • CE marking: Yes • Documentation: English-language operating manual The machine is currently in stock and available for prompt dispatch. Delivery can be arranged throughout Europe and to destinations beyond Europe. Transport costs are calculated individually and depend on the delivery destination. Please contact us with your delivery address or postal code to receive a transport quotation.