Used Polar L 600-G-3 for sale (105,840)

Condition: used, mileage: 108,300 km, power: 220 kW (299.12 HP), first registration: 11/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, * Special equipment: * TK box body by Kiesling, year 2020 * Rear portal doors Cedpfx Aoxafgyed Njrb * Cold curtain * Aluminum floor * Two lashing rails each on the right and left * Transverse load securing bar * Thermoking T 600R electric/diesel refrigeration unit * Night power supply socket including cable for refrigeration unit power hookup * BÄR 1.5 t tuck-away tail lift * Leather steering wheel * Turn assist * Lane keeping assist * Stability control assist * Attention assist * Active Brake Assist 5 * Predictive Powertrain Control (PPC) * Navigation system * Automatic climate control * Bi-Xenon headlights * Low engine tunnel storage compartment * Overhead storage above the windscreen with cover * Comfort package * Visibility package * 220 Ah battery * CB radio * Interactive multimedia cockpit * 2 air horns on cab roof * Electrical pre-wiring in cab, 24V / 100A * Driving assistance system: Turn assist * 12-speed gearbox, type G 211-12 * Manual (steel) lifting roof * Heated fuel filter * 390 L aluminum fuel tank, left * Reinforced engine brake * Reinforced engine compartment encapsulation * Wheelbase version 5,500 mm * Rear overhang 2,400 mm * Smoker package * Acoustic reversing warning (external sounder) * Tail lift control switch * Additional remote control key * Fleet management system interface * Circuit breaker * Exterior sun visor * 12V / 15A socket in passenger footwell * 24V socket in passenger footwell * Preparation for 4 surround cameras (display in onboard monitor) * Preparation for auxiliary headlights * Preparation for coolbox/refrigerator * Additional heater (water) * Further equipment: * Emission standard EURO 6 d * Front axle 8.0 t * Actros 5 * Heated front mirror * Trailer brake, 2-line * Connections on the left * Trailer socket 24V / 15-pin * Exhaust outlet centered under vehicle * Batteries arranged side by side, rear axle differential lock * Compressed air connection in cab * Compressed air unit with condensate monitoring * Automatic headlight activation (light sensor) * Driving assistance system: Attention Assist (fatigue detection sensor) * Driving assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5) * Driving assistance system: Lane keeping assist * ClassicSpace, 2.30 m, tunnel 320 mm * LED outline marker lights * Full air suspension front and rear * Electric windows * Tinted windscreen * Urea (AdBlue) tank: 60 L * Central locking with comfort function * Front air intake * Two-stage air compressor * Heated air dryer * Engine 7.7 L – 220 kW inline-6 diesel (OM 936) * Ramp mirror * Disc brakes on front and rear axles * Remote control key * Flashing LED side marker lights * Cab seats: multifunction passenger seat * Front wheel splash guards * 12V socket in passenger footwell * Tachograph / EU control device * Truck Data Center 7 (fleet management system) front * Preparation for toll collection * Preparation for Truck Data Center (fleet management system) * Drop front axle * Gross vehicle weight 18.00 t * Tyres: 315/60R22.5 * and much more. * Subject to errors, changes and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: MIKA-CN, Technical specifications: 1x Demag KBK 1 pillar jib crane, rated load 125 kg with Demag DC chain hoist (125 kg - year 2007) Load capacity at full outreach: 125 kg Height: approx. 3.05 m Underside of jib: approx. 2.55 m Outreach: 3 m Hook height: approx. 2.15 m Total weight: approx. 300 kg Equipped with 125 kg Demag DC chain hoist Including pin, cable drag chain, trolley, end cap, etc. Slewing range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location: 75053 Gondelsheim Additional cranes with load capacities from 80–5000 kg available, please enquire See photos Crjdpfx Aeyu E I Ijd Nob Shipping via freight forwarder or collection by appointment only

Condition: good (used), Polar Mohr 78 ES Paper Guillotine Csdpfoywdq Ijx Ad Nerb Machine in very good condition, serviced and ready to use. Made in Germany. Technical specifications: Cutting width: 780mm Stack height: 120mm LCD display Power supply: 400V Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: new, For sale: high-quality electric motor from the renowned brand WEG, Premium IE3 series. The motor is new, unused, and has been stored in a warehouse – condition is very good. Ideal for pumps, fans, industrial machinery, and workshop applications. ⚙️ Technical specifications Manufacturer: WEG Model: AL90S L 02 Power: 2.2 kW Speed: 2855 rpm Voltage: 230 / 400 V Frequency: 50 Hz Current: approx. 7.8 / 4.5 A Efficiency class: IE3 Degree of protection: IP55 Duty type: S1 Flange version: B5 Shaft diameter: approx. 24 mm Weight: approx. 22 kg Crodoyvamnjpfx Ad Njb Year of manufacture: 2018

Condition: good (used), Polar Mohr 92 ED Paper Cutting Guillotine This machine has been serviced and is ready to use. This is the most respected guillotine brand, a flagship product. Technical specifications: Cutting width: 920mm Crjdpfx Adoyur Hds Njb Stack height: 130mm Programmer with color display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables. Knife change via the control panel Weight: 1890kg 380V power supply Includes documentation, a tool kit, a safety knife change tool, a tapping block, a spare knife, and one machine knife.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, pipe diameter (max.): 9,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, model: GS-HG Maximum length of pipe: Cedpfewwqvwsx Ad Nerb

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. Csdpfxewg R I Es Ad Njrb //// PRICE SHOWN IS PER PIECE ////

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: MING11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 18,000 mm, total width: 2,000 mm, total height: 3,000 mm, axle spacing: 1,500 mm, load capacity per stand: 7,000 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Cantilever racking, long goods racking, heavy-duty racking - double-sided Consists of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (both sides) Cjdpfx Adsv Smr So Norb Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7000kg Arms are continuously adjustable Including crossbars from arm to arm, including wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: new, empty load weight: 1,300 kg, maximum load weight: 2,200 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 7,330 mm, loading space width: 2,400 mm, loading space height: 2,300 mm, loading space volume: 40.3 m³, color: black, construction height: 2,300 mm, working width: 2,400 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, sheet steel sandwich body 40mm walls, braked, PVC floor, 3x sales hatch + bag storage, gas door, * IMMEDIATELY AVAILABLE * Sheet steel sandwich body 40mm walls, braked, PVC floor, 3x sales hatch + bag storage, gas door TECHNICAL DATA - Make: Other - Model: VK 35602523 - Vehicle type: Sales trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 597 x 240 x 230 cm - External dimensions (L x W x H): 733 x 250 x 293 cm - Floor loading height: 55 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,300 kg - Payload: 2.200 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Sturdy V-drawbar, hot-dip galvanized - Tandem axle - Floor plate made of multiplex - Side walls made of very solid sheet steel sandwich, 40 mm thick - Sales hatch on the right side with bag storage - Lockable gas door - Additional rear sales hatch with bag storage - PVC covering on the floor - Door in the front wall, lockable from the inside and outside - Step on the drawbar - Support wheel with clamp - 4x scissor supports mounted incl. crank - Maintenance-free rubber support legs - Maintenance-free rubber support legs on the front wall, lockable from the inside and outside. maintenance-free rubber spring axles from KNOTT - automatic reverse drive - KNOTT overrun device and parking brake - plastic mudguards - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light Accessories can be retrofitted at extra cost - please enquire: - anti-theft device - 100km/H approval with wheel shock absorber - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Cjdpfx Adsu Ht Tcj Norb

Condition: new, empty load weight: 1,630 kg, maximum load weight: 970 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,780 mm, loading space width: 1,810 mm, loading space height: 2,300 mm, loading space volume: 15.7 m³, color: black, construction height: 2,680 mm, working width: 2,290 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Number of animals: 2 - Gross vehicle weight: 1,630 kg - Unladen weight: 970 kg - Payload: 1,630 kg - Interior dimensions: 378 x 181 x 230 cm (L x W x H) - Overall exterior dimensions: 503 x 229 x 268 cm (L x W x H) - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100 km/h: Included! - incl. vehicle documents Vehicle superstructure: - Floor: ALUMINIUM floor - Side walls/body: Anodized double-walled aluminium - Roof material: full polyester - Colour: black - Tack room: yes, large saddle compartment - Tack room equipment: luggage net, saddle holder, make-up mirror, bridle holder, lockable door, door holder - Feed troughs: no, optional - Chassis: Pullmann 2 independent suspension with coil spring and shock absorber - Height of stall bars: 106 to 127cm, adjustable - Distance between stall bars: 173 to 205 cm, adjustable - Tailgate material: approx. 1000kg load capacity, rubber with tread strips and anti-slip - Tailgate function: Hinged door and tailgate combination - Drain flap: no - Overrun device & brake: KNOTT - Lighting plug: 13-pin - Approval: COC papers, approval with green license plate possible for sports purposes Standard equipment: - Pullman2 chassis independent wheel suspension with coil spring - incl. wheel shock absorber Wheel shock absorber (100 km/h) - Aluminum floor - Aluminum walls - Tying possibility outside - Tying possibility inside - Stainless steel tie rod mounted on the right + suitable for feed troughs - Floor-to-ceiling ALU entrance door on the right + sliding window + aluminum handle, lockable - Tack room inside XXL with swiveling saddle holder - PVC transparent partition wall - Single wheel mudguards, plastic (black) - many sliding windows - rubber glued to floor and sealed - hay net hooks - step protection on side walls (GRP plastic) - maneuvering handle - tarpaulin roller blind as net - lifting device gas pressure shock absorber on tailgate - step on rear flap - 3rd brake light on rear flap - light Light system with reversing light - 13-pin plug Accessories can be retrofitted - please enquire: - Cover for automatic jockey wheel - Anti-sway hitch - Weight reduction to different total weight - Aluminum rims - Approach mirror - Climbing aid - Storage bracket for saddle (KTL-coated) - Feed trough for hanging with holder - Video surveillance system incl. reversing camera - Anti-theft device New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Credpju Hrthefx Ad Neb

Condition: new, empty load weight: 590 kg, maximum load weight: 2,010 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, loading space volume: 1.3 m³, color: silver, construction height: 1,010 mm, working width: 1,570 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. solid steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,600 kg - Unladen weight: 590 kg - Payload: 2,010 kg - Interior dimensions: 276 x 150 x 30 cm (L x W x H) - Overall exterior dimensions: 420 x 157 x 101 cm (L x W x H) - Loading sill height: 73 cm - Tires: 165R13C steel rims - Brakes: yes - Support wheel: yes, automatic - 100km/h: for an extra charge - Incl. vehicle documents: incl. vehicle documents. Vehicle superstructure: - Brake: yes - Number of axles: 2 - Floor: solid steel floor, 3mm solidly reinforced - Drop sides: anodized aluminium, double-walled double-walled - Dropside height: 30 cm - Dropside folding: 4-sided - Dropside removable: 4-sided - Dropside hinges: 3 side / 2 front + rear, bolted - Corner stanchions removable: Yes, all removable - Locks: Long lever locks, internal - Swivel dropside: No - Number of pallet spaces: 3 - Multifunctional vehicle:No - Tipping / lowering function:Without - Hydraulic pump:Cordless screwdriver pump - Number of stages cylinder:3-stage - Tipping angle (R/S):45 - Battery charging function:- - Overrun device/brake: ALKO - Frame/chassis:Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, square tube - Mudguards: Steel mudguards - Superstructures / attachments: Optional, attachable - Ramp shaft: No - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, can be retrofitted - Lashing eyes: 6 - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents Accessories can be retrofitted - please enquire: - Unique, torsion-resistant side member chassis for safe driving characteristics - Anodized double-walled aluminium drop sides - All drop sides can be folded and removed - Removable steel corner stanchions - Insertion option at all 4 corners for tarpaulin frames, grid attachment, drop side attachments or front wall extension - Recessed long lever locks - Full steel floor 3mm hot-dip galvanized ? extremely robust - drawbar and frame hollow profile construction welded and completely hot-dip galvanized - many cross beams therefore high point load - all cross and longitudinal beams rest on the floor - 6 lashing troughs foldable, mounted recessed in the floor frame profile (600DaN/kg) - 4 lashing eyes under the loading area - solid 3-stage hydraulic cylinder - hydraulic unit Pumpless- tipping with pump driven by cordless screwdriver - maintenance-free rubber spring axles from ALKO - automatic reverse drive - automatic tipping with pump driven by cordless screwdriver - maintenance-free rubber spring axles from ALKO - automatic reverse drive - automatic tipping with pump driven by cordless screwdriverALKO overrun device and parking brake - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - support wheel in the middle with clamp New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - Credpfx Adsu Ht Umj Nob

Condition: new, empty load weight: 1,895 kg, maximum load weight: 705 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,760 mm, loading space width: 1,790 mm, loading space height: 2,010 mm, loading space volume: 13.7 m³, color: grey, construction height: 2,370 mm, working width: 2,330 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, aluminium body / side door / 100 km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. aluminium body / side door / 100 km/h / tailgate hinged door Body color: dark grey Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY - Gross vehicle weight: 2.600 kg - Unladen weight: 705 kg - Payload: 1,895 kg - Interior dimensions: 376 x 179 x 201 cm (L x W x H) - Overall exterior dimensions: 499 x 233 x 237 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100 km/h: included! - incl. vehicle documents Vehicle superstructure: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Anodized aluminium double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 8 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 500kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at extra charge - Overrun device & brakes: Incl. Frame/chassis: Welded hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof and front available in anthracite or black - Interior full height: approx. 190cm - Interior full width: approx. 179cm - Aluminum drive-on flap lockable with optional lock - Drive-on flap as flap/door system (can be used as flap or door) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Sturdy cross members for high point loading - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - sturdy V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Special equipment included in the price: - Lockable front right side door, approx. 125x60cm Accessories can be retrofitted - please enquire: - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-and-hole rails for lashing straps & locking beams - Rod strip with rubber coating for lashing straps & locking beams - Steel or aluminum locking beams - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Cedpfx Adsu Ht Srj Nsrb

Condition: new, empty load weight: 745 kg, maximum load weight: 1,855 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,800 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,660 mm, working width: 1,920 mm, E-hydraulics / ramp shaft / high front grille, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / ramp shaft / high front grille TECHNICAL DATA - Make: Debon - Model: PW2.4 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 300 x 180 x 35 cm - External dimensions (L x W x H): 437 x 192 x 166 cm - Loading height of floor: 72 cm - Gross vehicle weight: 2,600 kg - Unladen weight: 745 kg - Payload: 1.855 kg - Chassis: High loader (wheels under the body) - Tyres: 165R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, can be retrofitted EQUIPMENT - Brake: Yes - Number of axles: 2 - Floor: Galvanized steel plate on Finnish wooden multiplex plate - Drop sides: Aluminum anodized double-walled - Drop side height: Double-walled double-walled - Side wall height: 35 cm - Side walls foldable: 4-sided - Side walls removable: 4-sided - Side wall hinges: 3 lateral / 2 front+rear, screwed - Corner stanchions removable: Yes, all removable - Locks: Eccentric locksNo - Number of pallet spaces: 4 - Multifunctional vehicle: No - Tipping / lowering function: Can be tipped on three sides - Hydraulic pump: Electric pump - Number of cylinder stages: 4-stage - Tipping angle (R/S): 45 - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, C-profile - Mudguards: Plastic mudguards - Superstructures/attachments: Optional, attachable - Ramp shaft: Yes - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, retrofittable - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION - Anodized aluminium drop sides double-walled - Drop sides can be folded to the side and rear - Drop sides removable - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery - H-frame removable at the front - Ramp shaft pre-equipped - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 6 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - corrugated grid attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocho Crodpfeu Hr H Uex Ad Nsb

Condition: new, empty load weight: 825 kg, maximum load weight: 1,775 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,800 mm, loading space height: 950 mm, loading space volume: 5.4 m³, color: silver, construction height: 1,660 mm, working width: 1,920 mm, E-hydraulics / ramp shaft / grid attachment 60cm, automatic reverse drive, hot-dip galvanizing, roof window, loose, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / ramp shaft / grid attachment 60cm, loose TECHNICAL DATA - Make: Debon - Model: PW2.4 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 300 x 180 x 95 cm - External dimensions (L x W x H): 437 x 192 x 166 cm - Loading height of floor: 72 cm - Gross vehicle weight: 2,600 kg - Unladen weight: 825 kg - Payload: 1.775 kg - Chassis: High loader (wheels under the body) - Tyres: 165R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, can be retrofitted EQUIPMENT - Brake: Yes - Number of axles: 2 - Floor: Galvanized steel plate on Finnish wooden multiplex plate - Drop sides: Anodized aluminium, double-walled - Drop side height: Double-walled double-walled - Dropside height: 35 cm - Dropside folding: 4-sided - Dropside removable: 4-sided - Dropside hinges: 3 lateral / 2 front+rear, screwed - Corner stanchions removable: Yes, all removable - Locks: Eccentric locks - Swing tailgate: No - Number of pallet spaces: 4 - Multifunctional vehicle: No - Tipping / lowering function: Can be tipped on three sides - Hydraulic pump: Electric pump - Number of cylinder stages: 4-stage - Tipping angle (R/S): 45 - Overrun device/brake: KNOTT - Superstructures/attachments: Grid attachment - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, C-profile - Mudguards: Plastic mudguards - Attachments/attachments: Optional, attachable - Ramp shaft: Yes - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, retrofittable - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION - Anodized aluminium drop sides double-walled - Drop sides can be folded to the side and rear - Drop sides removable - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery - H-frame removable at the front - Ramp shaft pre-equipped - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 6 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - corrugated grid attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcha Crodpju Hr Ixefx Ad Neb

Condition: new, empty load weight: 625 kg, maximum load weight: 1,975 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,130 mm, loading space width: 1,670 mm, loading space height: 2,010 mm, loading space volume: 10.5 m³, color: black, construction height: 2,370 mm, working width: 2,150 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, aluminium body / side door / 100km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * with gross vehicle weight: 2600kg incl. aluminium body / side door / 100km/h / tailgate hinged door Body color: black Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: * IMMEDIATELY AVAILABLE * - Gross vehicle weight: 2,600 kg - Unladen weight: 625 kg - Payload: 1,975 kg - Interior dimensions: 313 x 167 x 201 cm (L x W x H) - Overall exterior dimensions: 445 x 215 x 237 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100 km/h: included! - incl. vehicle documents Vehicle body: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Aluminium anodized double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 6 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 500kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: 6 pcs. Frame/chassis: Welded, hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof - Interior continuous height: approx. 188cm - Interior continuous width: approx. 160cm - Aluminum drive-on flap lockable with optional lock - Drive-on flap as flap/door system (can be used as flap or door) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Sturdy cross members for high point loading - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - stable V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Special equipment included in the price: - Lockable front right side door Accessories can be retrofitted - please enquire: - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-and-hole rails for lashing straps & locking bars - Rod strip with rubber coating for lashing straps & locking bars - Steel or aluminum locking bars - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Crjdpfx Adju Htf Eo Nob

Condition: new, empty load weight: 1,895 kg, maximum load weight: 7,050 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,760 mm, loading space width: 1,790 mm, loading space height: 2,010 mm, loading space volume: 13.7 m³, color: black, construction height: 2,370 mm, working width: 2,330 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, aluminium body / side door / 100 km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. aluminium body / side door / 100 km/h / tailgate hinged door Body color: black Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY - Gross vehicle weight: 2.600 kg - Unladen weight: 705 kg - Payload: 1,895 kg - Interior dimensions: 376 x 179 x 201 cm (L x W x H) - Overall exterior dimensions: 499 x 233 x 237 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100 km/h: included! - incl. vehicle documents Vehicle superstructure: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Anodized aluminium double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 8 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 500kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at extra charge - Overrun device & brakes: Incl. Frame/chassis: Welded hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof and front available in anthracite or black - Interior full height: approx. 190cm - Interior full width: approx. 179cm - Aluminum drive-on flap lockable with optional lock - Drive-on flap as flap/door system (can be used as flap or door) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Sturdy cross members for high point loading - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - sturdy V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Special equipment included in the price: - Lockable front right side door, approx. 125x60cm Accessories can be retrofitted - please enquire: - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-and-hole rails for lashing straps & locking beams - Rod strip with rubber coating for lashing straps & locking beams - Steel or aluminum locking beams - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Cedpfx Adju Ht Slj Norb

Condition: new, empty load weight: 705 kg, maximum load weight: 1,895 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,760 mm, loading space width: 1,790 mm, loading space height: 2,010 mm, loading space volume: 13.7 m³, color: black, construction height: 2,370 mm, working width: 2,330 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, aluminium body / side flap / side door / 100 km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. Aluminum body / side flap / side door / 100km/h / tailgate hinged door TECHNICAL DATA - Make: Debon - Model: Roadster C700 - Vehicle type: Box trailer - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (LxWxH): 376 x 179 x 201 cm - Exterior dimensions (LxWxH): 499 x 233 x 237 cm - Loading height of floor: 35 cm - Perm. Total weight: 2,600 kg - Unladen weight: 705 kg - Payload: 1,895 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/65R14 - Chassis: Pullman2 coil spring - Support wheel: Yes, automatic - 100km/h approval: Yes DESCRIPTION - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof and front in color - Continuous interior height: approx. 187cm - Continuous interior width: approx. 181cm - Drive-on flap made of aluminum with optional lock lockable - Drive-on flap as flap / door system (can be used as flap or door) - Side flap, lockable, right - Side door front left lockable, 127x61cm (HxW) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Stable cross members thus high point load - PULLMAN V2 chassis Independent wheel suspension with trailing arm,coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - stable V-drawbar - plastic mudguards - 13-pin plug - reversing lights - large rear lights - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body: splash-proof not waterproof Accessories can be retrofitted - please enquire: - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slotted-hole rails for tensioning straps & locking beams - bar strip with rubber coating for tensioning straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Codpfx Aeu Hrwajd Nsrb

Condition: good (used), For sale is a rotary table type 800E suitable for a Netstal SynErgy 2000 injection molding machine. Technical data: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table design: NC rotary tilting table Rotary/tilt axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table size: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Crjdsxvz A Njpfx Ad Nob Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine data: Machine weight approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be organized throughout Europe on request and for an additional charge. Prices exclude VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Year of construction: 2017, condition: excellent (used), machine/vehicle number: WD750/9, Technical data: 1 Vetter / Demag pillar jib crane NL 250KG with Demag chain hoist Type AS2.5-3 Payload at full reach 250 KG / 0.25 tonne payload Height: approx. 3.95m Codpfx Adsvv Npze Norb UK boom: approx. 3.7m Reach: approx. 3.2m Hook height: approx. 3.3m Total weight approx. 800Kg including dowel plate 630mm with Demag DC chain hoist 250Kg Swivel range 270°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Year of construction: 2017, condition: excellent (used), machine/vehicle number: WD1093/25, Technical data: 1 Vetter / Donati pillar jib crane NL 2000KG with chain hoist Type M20-4.5 Payload at full reach 2000 KG / 2 tonne payload Credpfx Adsvv Nr Ne Njb Height: approx. 3.7m UK boom: approx. 3.28m Reach: approx. 4.5m Hook height: approx. 2.8m Total weight approx. 2000Kg including dowel plate 1570mm with Donati chain hoist NL 2000Kg with trolley drive Swivel range 360°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Condition: used, mileage: 297,000 km, power: 316 kW (429.64 HP), first registration: 03/2017, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2017, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), RENAULT C430 PLATFORM + CRANE + REMOTE CONTROL / 8x4 Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2017 ? MILAGE: 297 000 km EQUIPMENT: ? ABS ? ASR ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 680 x 247 x 60 cm (L x W x H) Crsdpfx Aoxtb Dued Njb CAPACITY: 13 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 200/363/143 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING CRANE: PALFINGER PK 26002 - EHD + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 01265

Condition: good (used), Technical data for the wide span shelf truss: Shelving system: Jung Heinrich Type: G Included in delivery are: 01x wide span shelf truss, used Crjdpfsgqu H Nox Ad Njb Material color: RAL 1007 yellow Z-profile: 50 x 30 mm agraffe: 3 HK (hooks) clear width: 2.145 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet pull-out, used for rack depth: 800 mm Material colour: blue Overall depth: approx. 810 mm Overall width: approx. 1,295 mm Height: approx. 265 mm Crjdpfx Asww Im Hsd Neb Pull-out: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, extra costs will apply, which can be provided upon request based on delivery location and order scope.

Condition: excellent (used), The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 600 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm 08x safety pins, new finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.580 mm depth chipboard: 600 mm surface: coated if necessary (two-part if necessary) 01x chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.380 mm depth chipboard: 600 mm Surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days. Csdpfji Ewqkox Ad Norb

Year of construction: 2018, condition: new, Your contact person in our company: Lord: Andre Evering Lord: Marcel Brahms Lord: Simon Blank We offer you a new post protection from the manufacturer Mecalux for sale. The post protection is suitable for a frame profile width up to max. 120 mm. Included in the scope of delivery are: Csdpjd Rxyrefx Ad Njrb 01x Post protection, new Material color: orange f. Stand profile width: approx. 120 mm Total height: approx. 600 mm Total width: approx. 132 mm Inner width: approx. 126 mm Total depth: approx. 70 mm Re-dequalifications: approx. 55 mm Material thickness: approx. 3 mm Hole dimensions: approx. 9 x 14 mm Hole spacing (middle-mite hole): approx. 400 mm Weight / pcs.: approx. 4,298 Kg 04x Hexagonal screw: M8 x 25 mm 04x Tooth nut: M8 04x Washers: M8 Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without unloading)