Used Prominent Cip Pumpe Mit Dosierung for sale (15,514)

Condition: excellent (used), Four-jaw spiral chuck Diameter 315 mm Chuck height, flange 125 mm Short taper bore, size 6 Taper diameter 106.39 mm Pitch circle diameter for studs 133.4 mm 4 studs, M 12 Accessories: 1 chuck key Fgsdpfolguy Sjx Afush 1 set of hardened boring jaws 1 set of hardened turning jaws Weight 103 kg Shipping dimensions: W 800 x D 600 x H 550 mm

Condition: new, maximum load weight: 30,160 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with immediately and shortly available vehicles on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Frame: Steel welded construction with a front frame bend, front corners chamfered and a chamfer at the rear. Access ramp with excavator bucket recess in the center = a recess at the rear between the longitudinal beams, approx. 2,300 mm long, integrated into the outer frame. - 4 pairs of approx. 4-tonne lashing points - 7 pairs of recessed, retractable approx. 10-tonne lashing rings (2 x on the raised platform, 1 x in the front bend slope, 3 x in the low bed between the wheel wells, and 1 x in the access ramp) - 2 pairs of wheel wells - 1 pair of wheel wells, approx. 2,300/1,270 x 400 mm (L1/L2 x W), in front of the bend, including a one-piece, drive-over aluminum cover, for a maximum surface load of approx. 11,650 daN/piece. - 1 pair of wheel wells, approx. 1,390/590 x 270 mm (L1/L2 x W), between the 3rd and 4th axles, including a one-piece, drive-over aluminum cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700-3,600 mm, with wheel diameters of approx. 1,485-1,740 mm, maximum rear overhang of the wheel loader of 2,220 mm. - Width between the wheel wells approx. 1,255 mm (= outer/outer longitudinal beam) Frame attachments: - 5 pairs of mounting pockets in the outer frame for rectangular tube supports, approx. 100x50x5 mm (3 x in the low bed and 2 x on the raised platform). - Without rectangular tube supports. - On both sides of the low bed platform, retractable widening extensions with softwood planks approx. 50 mm (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm). - 4 pairs of folding approx. 10-tonne lashing rings, arrangement: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair at the very rear in the excavator bucket recess, left and right; 1 pair at the front of the raised platform, in front of the bend, inside the longitudinal beams; 1 pair in the low bed at the rear in front of the access ramp, in the excavator bucket recess, left and right. Towing device: Fodpfxjz Ed Azs Afujgh - Fixed drawbar with approx. 50 mm heavy-duty towing eye, bent design, silent block bearing, drawbar locking spring with tensioner. - Truck coupling height from approx. 820 mm to approx. 1,010 mm. - Drawbar length approx. 1,800 mm. Support system: - 2 hydraulic supports at the rear, to be operated individually, control unit housed in a separate stainless steel box. Axles: - SAF air suspension low loader axles with drum brakes, load capacity approx. 11 tonnes/axle, S-cam brake approx. 300/200 mm, automatic brake linkage adjustment. Wheels: - 16 wheels, tires 245/70 R 17.5, 146/146F, manufacturer Conti HTR2 (tire load capacity approx. 12 tonnes/axle). Braking system/suspension: - Braking system according to ECE regulation R13, two-line pneumatic braking system. - Braking system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed, RSS/RSP stability program, spring brake parking brake on 3rd and 4th axles. - Aluminum air reservoirs for a total weight of 44 tonnes. - Brake/air connection lines with 2 individual coupling heads, yellow/red. - EBS/ABS connection cable. - Rubber strap as a holder for EBS and electrical plugs. - Air suspension with lifting and lowering device, to be operated separately at the front and rear. - Automatic adjustmen

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades Fgsdpsyy A Iqofx Afujh 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: used, maximum load weight: 28,718 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2015, loading space length: 13,364 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 94 m³, total length: 13,886 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2015, Equipment: ABS, Schmitt SCS 241L-13.62 EB | Curtain-sided semi-trailer, 94.27 m³ | LBW Bär + Pallet box + Lift axle Description: For sale is an operational tautliner from the manufacturer Schmitz (Type: SCS 241L-13.62 EB). The semi-trailer features a Bär loading platform (2t), a pallet box, and a lift axle. Dimensions & Volume: Length: 13.64 m * Width: 2.48 m * Height: 2.78 m * Loading volume: 94.27 m³ Tires (385/65 R22.5): Axle 1: 10-40% * Axle 2: 10-30% * Axle 3: 10% Technical Data & Vehicle Details: First registration: 04/30/2015 * Year of manufacture: 2015 * Color: Silver * Axles: 3 Rotos axles with disc brakes * Suspension: Air suspension with lift axle * Permissible total weight: 36,000 kg * Payload: 28,718 kg * Tare weight: 7,282 kg * Chassis number: 3219197 Equipment & Extras: Bär loading platform (2t) * Pallet box * Edscha cover & side curtain Fjdpfx Afjz Ewyyouegh * RSAB Roof Safety Airbag * Lashing points for load securing * Code XL * ABS & electrical connections (ABS 15-pin / 2x 7-pin) Inspections: MOT: on request, a new MOT is possible * Safety inspection: Valid until 11/2026 The semi-trailer is available immediately. Inspection possible by appointment. ---- New main inspections / safety inspections or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and reliability. As we place great importance on customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / export license plates We will gladly help you in obtaining export license plates/short-term license plates. Processing of customs formalities We will gladly help you with the processing of customs matters.

Condition: used, functionality: fully functional, Year of construction: 2022, machine/vehicle number: 2453308, power: 2 kW (2.72 HP), load capacity: 750 kg, lifting height: 26,000 mm, platform length: 5,080 mm, platform width: 1,200 mm, overall weight: 18,260 kg, transport length: 5,690 mm, transport width: 1,390 mm, transport height: 3,170 mm, construction height: 4,160 mm, fuel type: electric, tire size: 28x12 -22, color: red, Equipment: UVV, all wheel drive, Technical specifications Year of manufacture: 2022 Engine: Electric Working height: 28.00 m Platform height: 26.00 m Platform extension: 1.90 m Platform dimensions (L x W): 5.08 m x 1.20 m Overall dimensions (L x W x H): 5.69 m x 1.39 m x 4.16 m Max. load capacity: 750 kg Drive system: 4 x 53 VAC / 2.0 kW Lifting drive: 53 VAC / 28.0 kW Fgodoyqyzuspfx Afush Travel speed: 0.1 - 1.5 km/h Gradeability: 30% Weight: 18,260 kg Four-wheel drive, outriggers, fully functional, compliant with occupational safety regulations, general signs of wear and tear.

Condition: excellent (used), Airless spraying unit Fsdjy I T Haopfx Afuogh Brand: GRAO Model: H 32 Hose length: 15 meters

Condition: used, Year of construction: 2021, operating hours: 5,300 h, Tracked excavator CAT 352-07 Fgedpfxjz D R Egj Afush The machine has only 5,300 operating hours and is in good condition Operating weight approx. 52,800 kg

Condition: used, Parallel vise with electric clamping device Jaw width 275 mm Fjdsby Uycspfx Afujgh

Year of construction: 2000, condition: excellent (used), Tailstock Bore diameter: 520 mm Fodefgwi Rspfx Afuogh Overall height with base: 970 mm Overall height without base: 650 mm Tailstock spindle diameter: 100 mm

Condition: used, mileage: 108,000 km, power: 132 kW (179.47 HP), first registration: 08/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,110 mm, loading space height: 2,250 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, tail-lift, MAN TGE 3.180 Box body Young Ecobox L-4200mm * 3 D roof spoiler * 2 rows of combination lashing strip * Floor eyelets (airline tracks left and right) * 4 cyl. Dhollandia 750 kg tail lift, roll-off protection * Navigation * Reversing camera * Power windows Fgedpfsv Emm Nsx Afuoh * Air conditioning * Adjustable driver's seat * LED rear lights * Front fog lights * Widened mirrors * Loading height 2,190 mm * Interior height: 2,250 mm * Interior width: 2,110 mm * Interior length 4,300 mm Speed limit 120 km/h Subject to prior sale and errors excepted! Sale exclusively according to our AGB`s Important note ? Important information: Despite careful checking of all details in our offer, it can happen that errors creep in. Some of these are caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent guaranteed properties.

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Fgodpfx Afjy Dc R Tjuoh Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Sold as seen, without warranty without guarantee

Condition: new, overall weight: 15,000 kg, loading space volume: 37 m³, loading space width: 2,430 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, We offer roll-off containers with a folding net cover in a spar-free design, available to order. ---FINANCING---RENT-TO-OWN---LEASING--- -possible, please contact us!- Fsdezu Dd Hopfx Afuogh Type Eco "H" with additional reinforcing band -> new model, reinforced design Thanks to the folding net system, cargo can be secured in 15 seconds. Dimensions: 6500 x 2400 x 2400mm = 36.5 cbm Other sizes available upon request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Bottom: 5mm Walls: 3mm Crossmember: INP 180 Transition from bottom to wall is rounded. Mounting bracket Ø 50 mm, hook height 1,570 mm -Folding net system, semi-automatic -> integrated into the top edge -Mesh size 2 x 2mm -Lever mechanism and brackets galvanized -End profile made of special profile, bent -Door lock, Holland + model -Lateral central lock -All-around tarpaulin and net hooks -Ladder rungs on the front -Primed once on the inside, twice on the outside -Painted twice in a single color on the outside, according to the customer's RAL color Optionally available to order: -French flap -Swing flap -Grain slide What sets us apart from others? -Robot-welded component groups -All weld seams are continuous on the spars -All containers are bead-blasted -Primed twice -Painted twice -All containers have nameplates and a valid UVV inspection certificate.

Condition: good (used), Hydraulic pump, oil pump, gear pump Fedpfx Aeb A Siyjfusgh -Recording wave: -Number: 2x hydraulic pumps available -Price: per piece -Dimensions: 170/120/110 mm -Weight: 4.3 kg

Condition: ready for operation (used), Heidenhain UV140 power supply unit ID: 335 009-03 SN: 11524271D; the item has been refurbished and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Fgedey Nrppspfx Afush

Condition: used, Year of construction: 2007, functionality: fully functional, volume flow: 300 m³/h, final pressure: 0.5 bar, power: 7.5 kW (10.20 HP), rotational speed (max.): 1,720 rpm, We offer this used Gardner Denver VC 300 (01) vacuum pump, year 2007. BOTH PUMPS – SOLD AS A SET Fjdpfx Aoy Id I Uefusgh Vacuum range: 0.5/10 mbar (abs.) Capacity: 300/360 m³/h Power (S1): 7.5/9 kW Speed: 1450/1720 rpm Serial number: 2711829 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Hydraulic Power Unit with Hydraulic Pump FRIEDRICH - REXROTH - HYDRONORMA Fgodpfx Afoxf Uzkoujh Hydraulic unit type HY01 - PV2V3-30 / 12R1MC 63 A1 Year of manufacture: 1979 Pump operating pressure: 80 bar Pump flow rate: 14 liters/min (unloaded) Motor power: 1.5 kW Tank capacity: approx. 30 liters Power supply: 400 volts, 50 Hz - Silent power unit, space-saving design - Hydraulic pump BOSCH REXROTH type PV2V3-30 / 12R1MC 63 A1 - Solenoid valve BOSCH REXROTH 081WV06P1N112 - Return line hydraulic filter - Pressure gauge - Hydraulic tank with top lid for easy access - Electric switch for 2-way changeover Space required (L x W x H): 415 x 410 x 850 mm Net weight: 85 kg Good condition

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor Fodpfxevwi Nqj Afuegh -Manufacturer: Bosch, hydraulic pump -Type: Flange/shaft: see photo, square 8 x 17 mm -Number: 4 pumps available -Price: per piece -Dimensions: 87/84/H100 mm -Weight: 1.9 kg

Condition: used, Year of construction: 1996, functionality: unexamined, Used hydraulic unit from a Windsor injection molding machine, consisting of: Fjdpfx Afjz D S Ensusgh - Electric motor Schorch KA7315M-BB03F-Z, manufactured in 1996, with 132 kW - Hydraulic pump Sauer, type 88P 226-197 LF - Reservoir tank with oil cooler, filters, and hydraulic block - Corresponding Lenze inverter in a suitable control cabinet Please refer to the attached images for further details. Collection in 42781 Haan, loading with a crane is possible.

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: S16W80-11-4, load capacity: 20 kg, arm reach: 1,717 mm, controller manufacturer: Yaskawa, controller model: DX100, teach pendant manufacturer: Yaskawa, teach pendant model: JZRCR-YPP01-1, input voltage: 400 V, type of input current: three-phase, repeat accuracy: 0.06 mm, For sale is a Yaskawa Motoman HP20D 6-axis industrial robot with DX100 controller, teach pendant, connection cables, and a customer-specific pneumatic gripper/handling device. Technical data and specifications: - Model: Motoman HP20D - Robot type: YR-HP0020D-B00 - Year of manufacture: 07/2011 - Serial/order number: S16W80-11-4 - Axes: 6 - Payload: 20 kg - Horizontal reach: 1,717 mm - Repeatability: ±0.06 mm - Robot weight: 268 kg - Maximum pneumatic pressure: 490 kPa - Controller: Yaskawa DX100 - Controller type: ERDS-HP0020D-E02 - Power supply: 400/415/440 V, 3-phase, 50/60 Hz - Average connected power: 2.0 kVA - Full load current: 5.8 A - Teach pendant: JZRCR-YPP01-1 Visible scope of supply according to the images: - Robot arm on welded steel base - DX100 control cabinet - Teach pendant - Robot, operator device, and connection cables with CEE plug Fgsdpfx Asz Ebn Uefuoh - Customer-specific pneumatic gripper/handling device Used condition with paint chips, scratches, and dirt. The robot has not been re-tested for functionality after disassembly; therefore, it is sold as untested. The function and suitability of the customer-specific gripper device have not been tested. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. Transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: used, maximum load weight: 14,590 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2010, next inspection (TÜV): 01/2027, loading space length: 7,500 mm, total length: 9,140 mm, total width: 2,440 mm, total height: 1,300 mm, Equipment: ABS, * 2 Schmitz AFW 18 BDF trailers in absolutely top condition – fully galvanized – TÜV (German vehicle inspection) valid until 01/2027. * Coupled at a high level with a 40 mm eye – air suspension – SAF axles – disc brakes – tires: 315 / 65 R 22.5 in top condition. Fodpfx Afoz Ed A Ueuogh * Overall length: 9,140 mm – width: 2,440 mm – height: 1,300 mm. * Permissible total weight: 18,000 kg – unladen weight: 3,410 kg – payload: 14,590 kg. * Trailer No. 1: first registered in 12/2007 & Trailer No. 2: first registered in 06/2010. * German vehicles – German vehicle registration documents – immediately available. * Please arrange an appointment for viewing. * Contact: Mr. Andreas Vogel. * The information provided on the internet is a non-binding description. * It does not constitute guaranteed characteristics. * The seller is not liable for typing or data transmission errors. * Subject to change, errors and prior sale.

Condition: new, Elmo Rietschle C-VLR 301 (40) Vacuum Pump – 290 m³/h – 150 mbar – 5.5 kW Industrial dry-running claw vacuum pump supplied with a WEG electric motor. Surplus unit, stored in its original wooden transport crate. Specifications: - Manufacturer: Elmo Rietschle - Type: C-VLR 301 (40) - ID: 10285940HI - Pumping capacity: 290.0 m³/h - Ultimate vacuum: 150 mbar (abs.) Fgodpfxjz E R T To Afuoh - Motor power: 5.50 kW - Speed: 2930 rpm - Duty cycle: S1 – 100% - Standard: EN 60034 - Electric motor: WEG - Motor type: W21 - Motor efficiency: IE3 - Frequency: 50 Hz - Motor speed: approx. 2940 rpm - Made in Germany - Supplied in original wooden transport crate Condition: Surplus stock. The unit appears unused and is supplied as shown in the pictures. Operational condition has not been independently tested or verified by us. Important: This item is surplus industrial equipment and is sold as-is and as shown in the pictures. No warranty or guarantee is provided. No claims regarding functionality, performance, or suitability for a specific application can be accepted. The buyer is responsible for inspecting and verifying the equipment before use. Location: Rotterdam, The Netherlands Worldwide shipping can be arranged upon request.

Condition: used, empty load weight: 6,990 kg, maximum load weight: 28,510 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 05/2021, next inspection (TÜV): 05/2027, total length: 8,800 mm, total width: 2,550 mm, total height: 3,050 mm, suspension: air, tire size: 385/65R22.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum rims, 3 axles, BPW axles, air suspension, 1st axle can be lifted, ABS (anti-lock braking system), roll-over tarp, catwalk, flap, folding U-shaped guard Fjdpoz E Niysfx Afuogh Body: Steel tipper body, approx. 26 m³, with hydraulic rear flap and roll-over tarp. 1st axle can be lifted. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Technical details: tank capacity: - l overpressure : - bar motor: 1400 U/min total power requirement: 3,0 kW Fodpeu N E Nhsfx Afuegh weight: 312 kg dimensions L x W x H: 1,05 x 0,67 x 1,94 m application use of hydraulic components operation pressure min/max.: 60/70 bar - nitrogen 54 bar - hydr. tank size L: 630 x W: 440 x H: 380mm with 100 Liter content *

Condition: used, Year of construction: 2001, Technical details: pressure: max. 275 bar stroke length max.: 600 mm weight: 1,5 t dimensions L x W x H: 2,8x0,6x0,6 m hydraulik operation cylinder - outer dimensions hydr. cylinder diameter=300 x 830mm - outer dimension operation cylinder diameter=360 x 750mm - stroke cylinder diameter 160 x 600mm equipment: - 1 hydraulic connection 1/2" - 2 fixing flanges (490x490mm) - 4 supports (Dm=60 x 800mm) - 2 sheet covers for flanges 600x600x80mm Fodpfx Aju N E Rfofuogh *

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg dimensions L x W x H: 1,2 x 1,1 x 1,8 m Fodpfx Aevvvrpsfujgh Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *