Used Protec W 3000 for sale (33,432)

Condition: good (used), Year of construction: 1988, machine/vehicle number: 802107, Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable, motorized 0.5 - 3° - Cutting gap adjustment by hand - Number of hydraulic clamping devices 18 pcs - Motorized rear stop 10 - 750 mm Gbjdpfezw Di Iex Afuou - Front angle stop + support arms - Number of strokes per minute, depending on cutting angle and cutting length 9 - 17 - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space requirement including rear stop, excluding front support arms approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - including: - Foot switch - Cutting line illumination

Year of construction: 2008, condition: ready for operation (used), We are offering this ready-to-use Roll-o-Matic roller die-cutting machine, roller size 0.932/3000, manufactured in 2008. Usable roller width: 3000 mm. The upper roller has a diameter of 320 mm and is equipped with a PA or cast nylon cutting sleeve. The roller gap can be adjusted independently on both sides and is equipped with an absolute value display for the roller gap. Operating modes: setup operation; semi-automatic operation; fully automatic operation with a light barrier and time control. Includes 5 conveyor belts, a counter, and additional equipment: support rollers for the lower roller to reduce deflection under high load. Chain drive and more powerful motor. Includes control buttons on both sides. Gbodpoz Ag Ukjfx Afusu If you have any questions or require more information, please send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, operating hours: 1,571 h, load capacity: 3,000 kg, fuel type: electric, battery capacity: 240 Ah, battery voltage: 24 V, fork length: 970 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 664 kg, total length: 1,650 mm, total width: 1,150 mm, fuel: electricity, STILL WAGNER EGU 3000 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 3.000 kg Fork length: 970 mm Drive: Elektro 24V Battery: 24 V 240 Ah v. 1998 Charger: ohne/without Tyres: Bandagen Service weight: 664 kg Godpfx Afoz Apvdoujbu Length: 1.650 mm Width: 1.150 mm Year of manufacture: 1998 Operating hours: 1.571 h Condition: working condition Internal no.: 1308670 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 1990, condition: used, machine/vehicle number: 55711, Item No. 25372-1 Approximate technical data: Gbodpfezxdkhox Afuou - Boiler capacity: 3000 liters - Operating pressure: 11 bar - Maintenance opening - Boiler diameter (approx.): 1150 mm - Space requirement (approx.): W 1350 x H 3500 x D 1350 mm - Weight (approx.): 700 kg

Condition: good (used), Year of construction: 2007, operating hours: 52,506 h, functionality: fully functional, punching force: 180 t, sheet thickness (max.): 6 mm, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,660 mm, punching diameter: 76 mm, workpiece weight (max.): 230 kg, overall weight: 16,000 kg, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, space requirement width: 6,800 mm, space requirement length: 7,600 mm, space requirement height: 2,500 mm, Equipment: safety light barrier, Special equipment: + MultiShear function + MultiTool function + Brush tables Standard equipment: - Safety light barriers - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives Gbsdpjz En Iusfx Afuju - Automatic repositioning - Tool length compensation - Small parts chute 500x500 mm - Punching slug extraction - Tool spray lubrication - Automatic tool change - Programmable punching tool lubrication with 2 containers - Programmable stripper - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphics programming - Online diagnostics via modem - Operating manuals.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC-Steuerung Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Gbodpfszx Nxdsx Afuju Machine is under power and can be inspected by arrangement.

Condition: used, We have a Wittmann W702 sprue picker for sale. Machine specifications: • Model: Wittmann W702 • X-axis (horizontal travel): 100 mm • Y-axis (vertical travel): 550 mm (adjustable up to 700 mm depending on configuration) Gbjdpfx Afsz I I Sfjusu • Z-axis (swiveling/rotation): 45° to 90° Typical applications: • Removing sprues from injection molds. • Automating simple pick-and-place cycles for parts or sprues. • Use with injection molding machines with lower clamping force.

Condition: used, mileage: 581,685 km, power: 350 kW (475.87 HP), first registration: 04/2011, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: black, gearing type: automatic, emission class: euro5, total length: 6,600 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, * MB CD radio with Bluetooth Gbjdpfx Asz N Rllofuju * Hands-free system * AXION rear view camera system * SNOOPER navigation system with external monitor * MB FleetBoard * Air conditioning * CB radio * On-board computer with multi-function steering wheel * Auxiliary heater * Electric sun visors * Electric auxiliary air conditioning * Cool box * Leather seats ----* Emergency brake assist * Lane keeping assist * Roll stability control * Hill start assist * Differential lock, rear axle * Headlight cleaning system ----* PTO for superstructure hydraulics * Pintle hook coupling with DouMatic * Engine brake ----PROTEC TM50 towing system * !!!!!FULLY EQUIPPED!!!!! * Tools & accessories * 2 winches * 2 hydraulic outriggers ----* Tire size, front axle: 385/55R22.5 * Tire size, rear axle: 315/70R22.5 * Fuel tank: 300 liters * Technically permissible total weight: 18000 kg * Unladen weight: 12095 kg * Overall length: 6600 mm * Inspection due: / ----Vehicle number/Vehicle: 12464----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recoveries and vehicle transport.----YOUR VTS TEAM

Condition: used, Year of construction: 2018, overall weight: 130 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz delivery time: on request Godez H Ah Sjpfx Afusbu terms of payment: 100% prior to delivery

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum floor, ramps, hand winch Equipment: - Ramps for driving on - 14 tie-down points - Universally usable, sideboards can be retrofitted Net: €4,193.28 / Gross: €4,990.00 Article number: HUA230402000.01 Technical data: • Brand: Humbaur • Model: Universal 3000 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 400 x 203 x 0 cm • External dimensions (LxWxH): 537 x 204 x 83 cm • Loading height of the floor: 60 cm • Permissible total weight: 3,000 kg • Unladen weight: 680 kg • Payload: 2,320 kg • Chassis: Low-loader (wheels under the body) • Tires: 195/55R10C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • 18mm solid aluminum floor, with anti-slip coating • Preparation for sideboards • Rope winch with winch stand included • Rope winch removable and can be inserted on the left or right, as well as adjustable in length • Hole pattern in the outer frame profile for optional wheel stop bracket • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many stable cross members for high point load • Additional longitudinal struts continuously welded in • 14 tie-down points within the loading area • Drive-on ramps made of steel grating, can be slid under the loading area, L=255cm • Reverse driving automatic • KNOTT overrun device and parking brake • Cast coupling head KNOTT • Very stable V-drawbar REINFORCED • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center • Registration documents: ZBII and COC documents Gbodjzy Azujpfx Afusu _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to ask for specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 1995, total height: 1,450 mm, total length: 1,500 mm, total width: 600 mm, Colour: Blue Empty weight: 400 kg - Details: - └ Description: Table 1500x580 lift height 2130 mm lift capacity 3000 kg - Year: 1995 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 6749 - Transport dimensions: 1500mm x 600mm x 1450mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gbodjz A Takepfx Afueu Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Compact dust collector, dust extraction system HURRICAN Type Tonga BG32 / ST / 27-3000 Filter system, extraction system, central extraction system, cartridge impulse filter, dust extraction Cartridge filter system, rectangular filter system, central fume extraction system Ideal for plastics, metals, wood, etc. Manufacturer: DAMBAUER GmbH Air and Environmental Technology Brand: HURRICAN Model: Tonga Machine No. 50313000 62187 Year of construction 2014 Nominal volume flow 3000 m³/h Nominal volume flow 50 m³/sec Filter area 27 m² (9 pieces, each with 3 m²) Differential pressure 3699 Pa Extraction connection at the filter inlet Ø 250 mm Extraction diameter max. 355 mm (manufacturer's specification) Exhaust connection at the filter outlet 600 x 600 mm Compressed air connection 5 bar Compressed air requirement 60 standard liters per cleaning impulse Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Filter control via SIEMENS PLC S7-1200, with touch panel - Pneumatic filter cleaning, automatic via control - Control cabinet mounted on the extraction system - 9 filter cartridges, Type 51065081200, Ø 160 mm, length 1180 mm - Maintenance flap for filter replacement - Radial fan installed on the top inside, Type VUVI 500 DF - 2 mobile dust collection containers, each approx. 106 liters (ECO bins) - Firewater connection with sprinkler nozzle in the filter chamber - Electrical wiring diagram available - Silencer on the air outlet side 600 x 600 x 1000 mm Space requirement L x W 1850 x 1500 mm Width with silencer on the air outlet side 2500 mm Overall height 4050 mm Footprint 1080 x 1080 mm Weight 820 kg (manufacturer's specification) Weight 1070 kg (weighed) Very good condition Transport dimensions for horizontal transport: Length 420 cm x Width 190 cm x Height 200 cm Gbsdpfx Aez Db Nijfusu Transport weight: 1150 kg

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, GF AgieCharmilles FORM 3000 VHP Year of manufacture: 2017 C-frame design, fixed table with lowerable tank Travel distances (X/Y/Z): 600 x 400 x 500 mm Distance table to quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing and erosion (U = 0-100 U/min) Pneumatic chuck (optional: Erowa/3R Systems) ISPG generator with 60 Amperes Best achievable surface roughness Ra 0.10 µm AGIEVISION 5 control interface 15” LCD color screen, mouse or touchscreen, jog wheel keyboard and hand control Includes CAPA electrode changer with 60 electrode positions Net weight of the machine: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm Gbsdpfx Aez Aqwisfusu After receiving your order, the machine will be cleaned, inspected, and thoroughly tested by us. We would also be happy to perform a customized test erosion for you. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Condition: used, Year of construction: 2002, Chiron FZ 15 W High Speed Twin Pallet Vertical Machining Centre. Serial No. 147-18 (2002) with Fanuc Series 18i-M Control, Dual Peiseler AWUP 160 NC Rotary Units, Air Bench Mist Filtration Unit, Swarf Conveyor. Country of Origin: Germany Gedpfjz Ar Ezsx Afuebu Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2009, operating hours: 4,963 h, functionality: fully functional, VIPER VT 40A / 3000 (2009) Manufacturer: VIPER Type: VT 40A / 3000 CNC turning machine Gbodpfx Ajzy N D Aofueu Year of manufacture: 2009 Condition: Used Operating hours: 4963 h Control: Fanuc 21i Swing over bed: 1000 mm Max. turning diameter: 860 mm Maximum turning length: 3,000 mm Spindle bore: 131 mm Spindle speed: 2,000 rpm Motor power: 55 kW Tool turret with 12 stations Bed design: Heavy-duty, 45-degree inclined bed made of Meehanite cast iron with flat guide.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 55,200 h, punching force: 18 t, total height: 2,252 mm, total width: 6,203 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, number of axes: 3, This TRUMPF TruPunch 3000 CNC punching machine was manufactured in 2013. It features a working area of 2500 mm x 1250 mm and a maximum punching force of 180 kN. The machine is equipped with 18 tool stations and offers a maximum punching rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 3000 machine we have for sale. Contact us for further details. • Maximum punching rate: 1000 strokes/min • Maximum marking rate: 2500 strokes/min • MultiTool change time: 0.3 sec • Tool stations: 18 • Sheet clamps: machine equipped with 3 vertically movable clamps • Maximum part size via part flap: 500 x 500 mm • Maximum part size via fixed chute: 80 x 50 mm • Control: BOSCH MTX CMP70 with 17-inch touchscreen • Tool holder: Rotating single-tool holder Gsdpfx Aszy Rlhefusbu • Thread forming: M2.5 to M10, with thread counter and tool breakage monitoring • Marking/embossing function • Retractable die • Programmable stripper • Automatic tool length compensation • Punch stroke counter • Automatic punch lubrication • Vacuum slug removal • Forming function • Brush table with loading/unloading support • Automatic repositioning with programmable clamps • Average power consumption (production): 5.6 kW • Average power consumption (automatic shutdown mode): 0.3 kW • CE marked • Full service history available • Machine under power and in operation; test possible Additional equipment • Independent part conveyor - not included in the sale • Tooling (e.g., RTC tool cassettes, punches/dies) - not included in the sale

Condition: good (used), Used for emptying steel containersWidth max 150 .Height 110 cm. max. Advantages: Efficient and safe unloading of crates and boxes with bulk products.Suitable for integration into production lines (transport, dosing systems, bunkers).Prevents damage to products such as potatoes or vegetables during emptying Note! This machine is delivered without electrical control cabinet and without electrically driven hydraulic pump More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines Gbodpez Rf Ecjfx Afueu The specialist in used agriculture and horticulture machinery

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, Electric Winch Equipment: - Additional ramps - Electric winch - Electric tailgate Gsdsz Ri Hdepfx Afujbu Net price: €39,726.89 / Gross price: €47,275.00 Article number: R7W335602300.02 Technical data: • Brand: Brian James • Model: Race Transporter • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (LxWxH): 600 x 235 x 199 cm • Exterior dimensions (LxWxH): 770 x 255 x 264 cm • Loading height of the floor: 58 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,431 kg • Payload: 2,069 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • White body made of high-quality, glass fiber reinforced plastic. Lightweight yet extremely stable • Daylight roof running along the entire length of the trailer • Lifting handles at the front and rear • Front access doors on both sides facilitate securing the front wheels • Rear access doors on both sides facilitate securing the rear wheels • Large, double-leaf side doors on the driver's side and passenger side, lockable • Electric full-height and full-width rear loading tailgate • 2x attachable additional ramps made of aluminum, 1.5 m long, for very low vehicles • Rollers in the rear of the vehicle • Interior height 199 cm - Entry height at the rear 188 cm • Side tower dimensions: XXX cm x XXX cm (WxH) • Lower edge of the side door height inside: XX cm • The perforated floor provides high slip resistance and is extremely durable, even under the toughest operating conditions. • Numerous lashing points and a highly load-bearing floor offer flexible securing options and perfect grip. • Wheel stops, fully adjustable with a quick adjustment system. Suitable for lowered vehicles • The closed floor panel made of composite (honeycomb core plastic floor) consists of a honeycomb structure that is covered on both sides with a deck covering. Extremely light and robust. • 2x central floor storage boxes, recessed into the loading area, offer the ideal storage option for heavy, bulky objects. Aluminum lids are included. • Electric winch, 12 V with remote control. 2,250 kg pulling force, with plastic rope and shackle hook. Powered by an on-board battery • Electro-hydraulic tilting function of the loading platform, tilt by pressing a button for an optimal entry angle • Central control unit for tilting function and tailgate, in addition to the remote control. Including battery charge indicator for on-board battery • Very stable steel frame welded • Frame completely hot-dip galvanized • Spare wheel with bracket mounted • Very stable V-shaped drawbar, REINFORCED • ALKO overrun device and parking brake • Reverse automatic function • Steel cast coupling head with integrated high-security lock ALKO • Plastic fenders • 13-pin plug • LED interior lighting with LED strip • Reversing lights • Large-sized, full-LED safety lighting • Side LED reversing lights • LED work lights at the rear for better visibility when loading and unloading • Integrated rear fog light • Various marker lights at the front, side and rear • Aluminum alloy wheels in anthracite • Heavy-duty support wheel • 5-year chassis warranty • 4 wheel straps for securing over the wheel

Condition: good (used), Year of construction: 1982, For cutting plate Gbodpfsz Rni Dox Afuju Produce 1982year

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm Gbjdpfxsz Rnn Tj Afusu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, operating hours: 15,034 h, machine/vehicle number: 1.500, roller (bottom) diameter: 220 mm, roller (top) diameter: 300 mm, working width: 3,000 mm, sheet thickness (max.): 8 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 8 mm Max. pre-bending thickness: 8 mm Max. working width: 3,000 mm Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 300 mm Diameter of lower rollers: 220 mm MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 6 kW Operating hours: 15,034 h Dimensions & Weight Dimensions (L x W x H): 7,700 x 2,300 x 1,700 mm Godpfoz Niq Tjx Afusbu Unladen weight: 10,000 kg

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - Includes safety pins - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Gbodpoz Rvnzefx Afuou Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: good (used), Year of construction: 1981, machine/vehicle number: 2627, Offer 26236 Technical Data: - max. working width 3040 mm - max. material thickness ST 37 4 mm - swiveling upper beam - bending angle adjustment, electronically pre-selectable 0 - 135° - max. lifting height of the upper beam 350 mm - lifting height of the upper beam, electronically pre-selectable - adjustability: - of the bending beam 125 mm - of the lower beam 125 mm - upper beam drive 400 V / 4.0 kW Gbodoz Nypgspfx Afuou - bending beam drive 400 V / 5.5 kW - space requirement approx. W 3950 x H 1600 x D 1200 mm - weight approx. 4800 kg - includes: - foot pedal - bending rails - backstop

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,056 h, total length: 1,640 mm, total height: 1,920 mm, total width: 1,000 mm, overall weight: 700 kg, laser power: 30 W, Equipment: compressor, The Prodways ProMaker P1000 is a professional selective laser sintering (SLS) system designed for the production of durable, functional parts and serial production. This 2019 model is equipped with a unique 30 W CO₂ laser and features a spacious build chamber measuring 30 x 30 x 36 cm (32 L). Gbodpfx Aez E R Iqefuju It is compatible with a wide range of materials, including nylon 12, nylon 11, TPU, and PP, and its open material parameters allow you to precisely adjust existing settings or qualify new powders based on your specific applications. It shows some minor cosmetic wear but is in perfect working order. Maintenance was performed in September 2026; the 30 W laser has 1,056 operating hours. The sale includes everything needed to start printing: - the printer with its control computer, - a Claind Nitro 35 nitrogen generator, - a Cormak Luft 700 air compressor (new), - a stainless steel powder mixer (new). The original packaging is available. Live demonstrations and test prints can be arranged.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. Gbodpjz Ebznefx Afuou No private sales.