Used Proton Wet Painting Dry Filter Booths for sale (13,401)

Condition: new, Year of construction: 2027, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. Dwjdpfx Akjvv Rfksmsc The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: used, Second-hand paint mist extraction system Dwodezk Nvyepfx Akmec with 2 side baffles with 2 fans Otherwise as shown in the pictures Availability: at short notice Storage location: Röllbach

Condition: new, Year of construction: 2025, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L13998xW5404xH2350 mm; total weight: about 10600kg; power: 19kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the flow wrap packaging and lid closing unit on request. Dodov Nmawopfx Akmjwc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Table dimensions 1250 x 750 mm Dsdpfx Akjxcp Nwemowc

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, used wet polishing machine from PERS, model Vibra-Line B 150 l, with buffer tank, in combination with PERS dryer Vibra-Dry A 200 l - both demo machines Technical data / Vibra-Line B 150 l: U-shaped work container with automatic discharge Dwedpfx Asy A N U Askmjc Capacity (gross): 150 l Usable volume (depending on workpiece geometry and material): 80 l Year of manufacture: 2024 Diameter, external: 1,170 mm Height: 860 mm Lining in the bowl: 22 mm, yellow or brown PU Total weight (empty): 320 kg Drive power: 2.2 kW Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Control cabinet with touch panel and frequency inverter Buffer tank – 90 l: The compound (soap solution) itself flows through the filter basket into the buffer tank, from which a submersible pump pumps the water back to the rotary vibrator. Dimensions of the buffer tank (L x W x H): 700 x 400 x 460 mm 1 submersible pump and 1 filter basket (630 µm) are included Technical data / Vibra-Dry A 200 l: Corn/grain dryer with automatic discharge - vibration dryer Year of manufacture: 2024 Volume: 220 l Motor power: 1.5 kW Heating: 3 kW per element (PTI temperature control) Capacity, workpieces: up to 65 kg Capacity, corn: 25-35 kg Speed: 1400 rpm Heating effect: 6 x 1.5 kW Length: 1,141 mm Width: 1,200 mm Height: 905 mm Internal dimensions of the bowl: 240 mm Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Corn granule temperature: +30 to +50 degrees Digital temperature control pneumatically controlled outlet valve For commissioning, 25 kg of corn kernels of type GM 16 or GM 20 must be used.

Condition: new, Filter plates for chamber filter press, chamber filter plates for chamber fitters presses. Dwodpfx Ajd Ezfqjkmsc Format 1000 x 1000 ( NEU ! ) The Chamber filter plates made of Polypropylen, is characterized by excellent chemical resistance and easy handling, due to its low weight, Short delivery time ! (Example photo) We always have good second-hand and new chamber filter plates from stock Gladbeck for your chamber filter press in all sizes. You are welcome to ask us for your requirements.

Condition: used, functionality: unexamined, overall weight: 7 kg, Ferwood code: RU0011395 - Manufacturer code: 10.F5.CBB-YM00 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer an overhaul service, please contact us. 7 KG - 46x39x27 Dwedpfx Aeyk Dzrskmoc

Condition: used, functionality: unexamined, Ferwood Code: RU0011599 - Manufacturer Code: NHD400/24 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Djdpfx Akowrzllomewc

Condition: used, functionality: unexamined, Ferwood Code: RU0011590 - Manufacturer Code: SF1321D - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Dwsdpfx Ajwp H Ugokmjc

Condition: used,

Condition: used, functionality: fully functional, USED VACUUM CLEANER FOR DUST, LIQUIDS, AND SHAVINGS, ALL-PURPOSE. CAPACITY 175 L, 11 KW, STAINLESS STEEL BODY, refurbished to like new. 15HP, 380V 50 HZ, 100mm NOZZLE, Dimensions 1300x1000x2500H, WEIGHT 330 KG. Dwsdpezhur Isfx Akmjc

Condition: used, IL 2 control unit for ILSA Multimatic. Dwjdpjy Uv Uaefx Akmoc

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Dedpfxswc Nrne Akmewc Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: good (used), Year of construction: 1994, Working area approximately 2,080 x 1,430 mm, lateral impact plates on the right and left, filter area approximately 1,800 x 1,300 mm, 2 rows of paper volume filters approximately 650 x 1,800 mm, internal fine filter G4 approximately 1,350 x 2,000 mm, air flow rate 4,500 m³/h, pressure max. 500 Pa, motor 1.1 kW / 1,400 rpm. Ex works, as inspected, from the Seevetal location, subject to prior sale. Dsdpspvil Tefx Akmewc

Year of construction: 2022, condition: new, The Venturi Scrubber is a device that generally consists of a centrifugal part capable of separating the solid parts from the liquids and of a Venturi column that narrows in the middle section to vary the pressure and therefore allow the polluting solid particles to fall through the fumes. This type of Scrubber is used for the removal of dust and pollution present in corrosive and dangerous industrial gases. Venturi Scrubbers are used in the abatement of particulates that come from coal, oil or wood boilers, the textile industry but also for emissions from the chemical industries, wood industries, paper mills, etc. Dodpoh Atp Aofx Akmswc

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Djdpfx Akezuzg Somjwc Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1990, Paint/coating application system Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding. Dwedozuzqdjpfx Akmsc

Condition: good (used), Year of construction: 2004, The used filter dust collector Infastaub MKR 4/20 - 4/20 RO or industrial cassette filter, is a high-performance filter system for efficient process air dedusting. Thanks to its two-stage configuration, the system is perfectly suited for critical and fine dusts – such as pharmaceutical dusts in the particle range of 1 to 10 µm. The integrated rotational cleaning (RO) ensures constantly low differential pressures and maximum service life in continuous industrial operation. Name: Cassette filter Manufacturer: Infastaub Type: MKR 4/20 - 4/20 RO Year built: 2004 -Max. volume flow: Up to 6,000 m³/h -Filter area: Total 160 m² (80 m² in the 1st stage + 80 m² in the 2nd stage) -Number of chambers: 4 chambers -Filter classes: Stage (cleanable): H13 (HEPA – 99.95% separation efficiency) Stage (safety stage): H13 to U15 (ULPA – up to 99.9995% separation efficiency) -Residual dust content: values down to < 0.001 mg/m³ -Max. operating temperature: +80 °C -Cleaning: pneumatic via compressed air pulse (approx. 6 bar compressed air pressure) -Dimensions (approx.): length 3,800 mm × width 1,150 mm × height 2,300 mm -Net weight: approx. 4 tons -Voltage: operating voltage 400V / 50Hz, control voltage 24V DC -Material: stainless steel -Raw gas collecting duct ∅ D6: 315 mm, M6: 700 mm -Technical doc.: Yes Dsdpfx Akemzat Homjwc -Accessories: Control -Condition: Used-good -Price: On demand

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230 Dust Extractor with Dust Filter The CORMAK FM230 with a dust filter is a compact, mobile, professional-grade dust extractor designed for the efficient removal of wood chips, dust, and sawdust in woodworking workshops. Thanks to the use of a dust filter, the machine provides not only high suction performance but also improved filtration efficiency, significantly enhancing air quality in the workplace. Main Advantages of the Machine Extraction capacity of 1,000 m³/h – ideal for use with low- and medium-powered woodworking machines. Dust filter – effectively captures small particles, including fine sanding dust. 0.75 kW / 230 V motor – quiet, energy-efficient operation without the need for a three-phase power connection. Mobility – four castor wheels allow the extractor to be easily moved around the workshop. Compact design – the machine takes up little space, making it an ideal choice for small workshops. Construction and Technology The machine is equipped with a metal sawdust fan, ensuring a long service life and reliable operation. The high-quality dust filter efficiently separates dust particles from the airflow, helping to reduce airborne dust in the workshop. The robust powder-coated housing protects the internal mechanisms, while the sealed suction system prevents pressure losses. Precision and Operating Efficiency The CORMAK FM230 woodworking dust extractor provides stable and consistent suction. An extraction capacity of 1,000 m³/h combined with a low-power motor enables efficient operation with a single woodworking machine without interrupting the work process. Thanks to its fine-particle filter, it is also an excellent dust extractor for fine dust generated during wood sanding. Applications Small and medium-sized woodworking workshops Dedjz A Ut Eepfx Akmswc Craft and production facilities Technical schools and educational workshops Hobby woodworking workshops The FM230 is ideally suited for use with: milling machines, planers, jointers, belt sanders, thickness planers. Standard Equipment Dust filter Waste collection bag Castor wheels with brakes Bag fastening clamp Optional Equipment Ø100 mm extraction hose Suction outlet reducers Additional set of filter bags Technical Specifications Specification Value Motor power 0.75 kW Extraction capacity [m³/h] 1,000 Negative pressure 1,800 Pa Noise level 70 dB Negative pressure 1,020 Pa Noise level 70 dB Bag capacity 60 l Number of bags 2 (filter + waste collection) Extraction outlet diameter 100 mm Dimensions (H x W x L) 1,500 × 420 × 600 mm Power supply 230 V Weight 27 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, working width: 330 mm, passage height: 120 mm, total length: 5,000 mm, Equipment: documentation/manual, Infrared drying tunnel for profiled wood Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying system is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame timber, moldings, profiled wood, and generally all types of wood profiles. It can also be used for preheating the profiles before the painting process to improve the paint quality. Passage width approx. 330 mm Passage height approx. 120 mm Infrared heating elements from above and below Includes outlet conveyor belt, manufacturer: Makor Length 4000 mm, conveyor belt width 250 mm Dwedpjzhap Eofx Akmec Connected load approx. 55 kW Dimensions: Drying tunnel approx. 5000 x 1400 x 1750 mm (L x W x H) Operator terminal approx. 1200 x 500 x 1100 mm (L x W x H) Conveyor belt approx. 4000 x 600 mm (L x W) Total weight approx. 2200 kg Includes documentation, wiring diagram, and operating manual.

Condition: good (used), Industrial oven, drying oven Type: PKL-1 Dwodpfxod Tiu Ie Akmsc Maximum temperature: 180 ° C The temperature is adjustable Number of tablets: 10 Size of Table: 70x50 cm Individually lockable electrical latch Oven dimensions: Height: 1450/1900 mm Width: 1250 mm Depth: 850 mm Weight: 350 kg We have 3 pieces on Stock!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser Dodpfxsrzq Aro Akmowc machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: used, functionality: fully functional, We offer for sale a Heraeus T 5050 E /ct1974 in excellent condition Drying cabinet, industrial oven. Ventilated oven with 2 shelves. Nominal temperature max: 250°C volume approx. 180 liters Power: 2000W. 1 phase 50Hz Dimensions Interior 50x49x50 cm., housing: 79x56.5x65.5 cm. With Heraeus kelvitron controller - with continuous/timer function. Temperature protection DIN 12880 Dwodpfx Akeugtz Rsmec Protection class: IP20

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h Dsdpfx Ajvvcqxokmjwc extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, nominal power (apparent): 300 kVA, secondary voltage: 200 V, 300 kVA three-phase transformer (3 x 400 V -> 3 x 200 V) for sale Dwodpfx Aow Ev N Ejkmoc Manufacturer: Trafó-Print Kft. Type: BT23.300k Power: 300 kVA Primary: 3 x 400 V Secondary: 3 x 200 V