Used Quaser Mv 134 C for sale (55,033)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 1x steel container, steel box, crate, metal box with lid 32 units available Dimensions: 120x100x77 cm Iodszckfnopfx Anweic With lid Hot-dip galvanized Completely closed and sealed bottom Very good condition, see pictures. Forklift available for loading. Pickup only by appointment in 75053 Gondelsheim. Shipping via freight forwarder is possible, please inquire with your postal code.

Condition: used, mileage: 750 km, power: 375 kW (509.86 HP), first registration: 06/2026, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not registered * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but gearbox-independent auxiliary drive MB 1.65, drive flange D=150 mm * and gearbox-dependent auxiliary drive MB 131-2C * Pump mounted below the upper edge of the frame * Gearbox lock NMV * Twin-plate clutch * Drivetrain 44-120 t * Gearbox oil cooler * Transfer gearbox VG2800-3W/1.45-1.04, permanent * Power Shift 3, Advanced transmission * Driving program: Offroad * Rear view camera * Lane keeping assist * Attention assist * Traffic sign assist * Active Brake Assist 6 * Active Sidegard Assist 2 * Frontgard Assist * ATS warranty according to general terms and conditions, 4 years, 340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Axle load, front axle: 9.0 t * Exhaust muffler, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air tank, aluminum * Electrical pre-wiring in the cab, 24V / 100 A * Suspension: Front springs 9.0 t, 4 leaves * Windshield, tinted with band filter * Vehicle without underrun protection at the rear * Speed limiter * Gearbox: 16-speed, type: G 280-16 * Gearbox lock, gearbox-independent * Rear axle, ring gear 300, 16.0 t * Interior filter for construction site vehicles * Fuel tank: 330 L, aluminum, right side * Cooling capacity for hot climates * Air filter: Cyclonic air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, gearbox-independent and clutch-dependent MB 1.65 * Parameterizable special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure monitoring system * Reversing warning: acoustic and warning flashing lights (external warning signal) * Key with remote control, additional (2) * Interface for fleet management system * Headlight protection grid * Sun visor, exterior * Stabilizer on 2nd rear axle, reinforced * Steel rims 11.75x22.5 (on front axle) * Additional 24V socket in the co-driver's footwell * Preparation for work spotlights on the upper rear wall of the cab * Preparation for additional headlights * Seat belt warning device * Twin-plate clutch * Additional features: Emission standard EURO 6e * ABS, can be deactivated * Axle configuration: 8x8/4, permanent all-wheel drive * Front mirrors, heated * Trailer coupling: Ringfeder hitch * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit, multimedia * Differential lock, front axle * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic switch-on for driving lights (light sensor) * Cab: Cab access, movable * Cab: Tilting mechanism, hydraulic * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: spring-mounted, standard * Suspension: Leaf spring / Leaf spring * Suspension: Rear springs 2x15.0 t * Power windows Iedezch Nqepfx Anweic * Urea tank (AdBlue): 25 L * Manually operated sunroof (steel) * Body/Superstructure: Chassis for dump truck * Comfort locking system * Steering pump, unregulated * Multifunction steering wheel * Steering oil cooler * Air intake behind the cab * Air compressor, 2-cylinder * Air dryer, heated * Engine: 12.8 L, 375 kW, R6 diesel (OM 471) * Engine variant: OM 471 * Auxiliary drive MB 131-2c * Type of use: Local distribution * Wheelbase variant: 4850 mm * Ramp mirrors * Waste heat recovery * Key with remote control (2) * Protection plate

Condition: used, mileage: 750 km, power: 375 kW (509.86 HP), first registration: 06/2026, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not registered * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but transmission-independent NMV MB 1.65 drive flange D=150 mm * and transmission-dependent auxiliary drive MB 131-2C * Pump mounted below the upper edge of the frame * NMV transmission lock * Twin-plate clutch * Drivetrain 44-120 t * Transmission oil cooler * Transfer case VG2800-3W/1.45-1.04 permanent * Power Shift 3, Advanced transmission * Offroad driving program * Rear view camera * Lane keeping assist * Attention assist * Traffic sign recognition * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * ATS warranty according to general terms and conditions, 4 years/340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Front axle load 9.0 t * Exhaust muffler mounted vertically behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Compressed air tank, aluminum * Electrical pre-wiring in the cab 24V / 100 A * Suspension: Front springs 9.0 t, 4 leaves * Windshield tinted with band filter * Vehicle without rear underrun protection * Speed limiter * Transmission: 16-speed - Type: G 280-16 * Transmission lock, transmission-independent * Rear axle, bevel gear 300, 16.0 t * Interior filter for construction site vehicles * Fuel tank: 330 liters, aluminum, right * Cooling capacity for hot climates * Air filter: Cyclone air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, transmission-independent and clutch-dependent, MB 1.65 * Parameterizable special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure monitoring system * Reversing warning: acoustic and hazard warning lights (warning signal on the outside) * Additional key with remote control (2) * Fleet management system interface * Headlight protection grille * External sun visor * Stabilizer on 2nd rear axle, reinforced * Steel rims 11.75x22.5 (on front axle) * Additional 24V socket in the passenger footwell * Preparation for work lights on the upper rear wall of the cab * Preparation for auxiliary headlights * Seat belt warning device * Twin-plate clutch * Additional equipment: Emission standard EURO 6e * ABS can be deactivated Iijdpfx Anjzch Nkswoc * Axle configuration: 8x8/4, permanent all-wheel drive * Front/approach mirrors, heated * Trailer coupling: Ringfeder towing coupling * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above 2nd axle * Electronic braking system (EPB) with ABS * Cockpit multimedia * Front axle differential lock * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic switching for headlights (light sensor) * Cab: Movable cab step * Cab: Hydraulic tilting mechanism * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: steel-sprung, standard * Suspension: Leaf / Leaf * Suspension: Rear springs 2x15.0 t * Electric window lifts * Urea tank (AdBlue): 25 liters * Manually operated lift roof (steel) * Body/structure: Chassis for dump truck * Comfort locking system * Steering pump, unregulated * Multifunction steering wheel * Steering oil cooler * Air intake behind the cab * Air compressor, 2-cylinder * Heated air dryer * Engine 12.8 L - 375 kW R6 Diesel (OM 471) * Engine variant OM 471 * Auxiliary drive MB 131-2c * Intended use: Local transport * Wheelbase variant 4850 mm * Ramp mirrors * Waste heat recovery * Key with remote control (2) * Protection plate

Condition: used, mileage: 750 km, power: 375 kW (509.86 HP), first registration: 06/2026, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not yet registered * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but gearbox-independent NMV MB 1.65 drive flange D=150 mm * and gearbox-dependent auxiliary drive MB 131-2C * Pump mounted below the upper edge of the frame * Gearbox lock NMV * Two-disc clutch * Powertrain for 44-120 tons * Gearbox oil cooler * Transfer gearbox VG2800-3W/1.45-1.04 permanent * Power Shift 3, Advanced transmission * Offroad driving program * Rear view camera * Lane keeping assistant * Attention assist * Traffic sign assistant * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * ATS warranty according to general terms and conditions, 4 years, 340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Front axle load 9.0 t * Exhaust muffler, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air pressure tank, aluminum * Electrical pre-installation in the cab 24V / 100 A * Suspension: front springs 9.0 t, 4 leaves * Windshield tinted with band filter * Vehicle without underrun protection at the rear * Speed limiter system * Gearbox, 16-speed - type: G 280-16 * Gearbox lock, gearbox-independent * Rear axle, bevel gear 300, 16.0 t * Interior filter for construction vehicles * Fuel tank: 330 liters, aluminum, right side * Cooling capacity for hot climates * Air filter: cyclone air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, gearbox-independent and clutch-dependent MB 1.65 * Parametric special module * Frame overhang 2500 mm Isdjzch Ndjpfx Anwoic * Smoker's package * Rain sensor * Tire pressure control system * Rear warning device, acoustic and hazard warning lights (external warning signal) * Additional key with remote control (2) * Fleet management system interface * Headlight grille * Sun visor, external * Stabilizer on 2nd rear axle, reinforced * Steel rims 11.75x22.5 (on front axle) * Additional 24V socket in the co-driver's footwell * Preparation for work lights on the upper rear wall of the cab * Preparation for additional headlights * Seat belt warning device * Two-disc clutch * Additional equipment: Emission standard EURO 6e * ABS switchable * Axle configuration: 8x8/4, permanent all-wheel drive * Front/approach mirrors, heated * Trailer coupling: Ringfeder drawbar coupling * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above the 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit, multimedia * Front axle differential lock * Air pressure connection in the cab * Air dryer with condensate monitoring * Automatic activation for headlights (light sensor) * Cab: movable cab entry step * Cab: hydraulic tilting device * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: spring-mounted, standard * Suspension: leaf / leaf * Suspension: rear springs 2x15.0 t * Power windows * Urea tank (AdBlue): 25 liters * Manual lift roof (steel) * Body/superstructure: chassis for dump truck * Comfort locking system * Steering pump, uncompensated * Multifunction steering wheel * Steering oil cooler * Air intake behind the cab * Air compressor, 2-cylinder * Heated air dryer * Engine 12.8 L - 375 kW R6 Diesel (OM 471) * Engine variant OM 471 * Auxiliary drive MB 131-2c * Intended use: local transport * Wheelbase variant 4850 mm * Ramp mirrors * Waste heat recovery * Key with remote control (2) * Protection plate

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not registered * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but gearbox-independent auxiliary drive MB 1.65, drive flange D=150 mm * and gearbox-dependent auxiliary drive MB 131-2C * Pump located below the upper edge of the frame * Gearbox lock NMV * Twin-plate clutch * Drivetrain 44-120 t * Gearbox oil cooler * Transfer gearbox VG2800-3W/1.45-1.04 permanent * Power Shift 3, Advanced transmission * Offroad driving program * Rear-view camera * Lane keeping assist * Attention assist * Traffic sign assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * ATS warranty according to general terms and conditions, 4 years, 340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Axle load, front axle: 9.0 t * Exhaust muffler, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air tank, aluminum * Electrical pre-installation in the cab 24V / 100 A * Suspension: front springs 9.0 t, 4 leaves * Windshield tinted with band filter * Vehicle without underrun protection at the rear * Speed limiter * Gearbox 16-speed - Type: G 280-16 * Gearbox lock, gearbox-independent Iiodpfezch I Tjx Anwec * Rear axle, bevel gear 300, 16.0 t * Interior filter for construction site vehicles * Fuel tank: 330 liters, aluminum, right side * Cooling capacity for hot climates * Air filter: cyclone air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, gearbox-independent and clutch-dependent MB 1.65 * Parameterizable special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure control system * Rear warning device, acoustic and warning lights (warning signal outside) * Key with remote control, additional (2) * Fleet management system interface * Headlight grille * Sun visor, exterior * Stabilizer on 2nd rear axle, reinforced * Steel rims 11.75x22.5 (on front axle) * Additional 24V socket in the passenger footwell * Preparation for work lights on the rear wall of the cab, top * Preparation for additional headlights * Seat belt warning device * Twin-plate clutch * Other equipment: Emission standard EURO 6e * ABS can be deactivated * Axle configuration: 8x8/4, all-wheel drive permanent * Front/approach mirrors, heated * Trailer coupling: towing coupling, Ringfeder * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit, multimedia * Differential lock, front axle * Air pressure connection in the cab * Air drier with condensate monitoring * Automatic switching for headlights (light sensor) * Cab: cab entrance, adjustable * Cab: tilting mechanism, hydraulic * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: steel sprung, standard * Suspension: leaf / leaf * Suspension: rear springs 2x15.0 t * Power windows * Urea tank (AdBlue): 25 liters * Sliding roof, manual (steel) * Body/superstructure: chassis for tipper * Comfort locking system * Steering pump, unregulated * Steering wheel with multifunction buttons * Steering oil cooler * Air intake behind the cab * Air compressor, 2-cylinder * Air dryer, heated * Engine 12.8 liters - 375 kW R6 Diesel (OM 471) * Engine version OM 471 * Auxiliary drive MB 131-2c * Type of use: local transport * Wheelbase version 4850 mm * Ramp mirrors * Waste heat utilization * Key with remote control (2) * Protection plate

Condition: new, overall weight: 2,400 kg, color: black, gearing type: mechanical, suspension: other, New HU/AU inspection, for 2 horses. Color: black/black. Full polyester horse trailer, Bücker Long-Life, sandwich construction. Permissible total weight: 2400 kg. Interior dimensions: 3445.00 x 1690.00 x 2390.00 mm. Aluminum sandwich floor. Rear ramp. Bücker Long-Life. Rubber glued and sealed on the floor and rear ramp. Rear ramp rubber with tread strips. Lockable, man-height entry door. Tinted opening windows. Hot-dip galvanized frame with welded longitudinal and transverse beams. Bücker Body-Protect chassis. Shock absorbers for 100 km/h. Safety box bar system, height and length adjustable. Interior equipped with kick protection, side padding and interior lighting. 2 removable feed troughs. Partition with PVC clear film. Lockable saddle room with two saddle holders, pull-out storage compartment, broom, shovel, bridle and whip holder, mirror and interior lighting. Support wheel, automatic. 13-pin connector. Extras: Aluminum rim "Black Shadow", polished black, additional €419.33 net. Premium Careliner M saddle room with pull-out saddle holder, additional €251.26 net. BI-LED lighting, additional €301.68 net. Panoramic roof, additional €587.39 net. FOR US, THE CONDITION AND OVERALL IMPRESSION ARE DECISIVE; THE PRICE COMES SECOND. Purchase price plus 4.9% freight costs and €40.00 for vehicle documents. If you have any further questions, please do not hesitate to contact Mr. Faller at . //*TRADE-IN, PART EXCHANGE OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information without guarantee.* You can find more offers on our website: . The description and specified data do not constitute a guarantee and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are subject to change! Iodol Tnv Dopfx Anwjic

Condition: good (used), Year of construction: 2009, Cutting width: 3700 mm. With glass loading and unloading device. Cutting system: heating and blade. Working height: 950 mm. Isdpfjxpnk Hox Anwoic Total length of the system: 4080 mm. Table width: 4020 mm. Width across the bridge: 4820 mm. Year of manufacture: 2009 Weight: approx. 6.2 t. Condition: good, second-hand

Condition: used, overall weight: 6,000 kg, axle configuration: 2 axles, first registration: 05/1996, next inspection (TÜV): 12/2025, loading space length: 8,400 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,480 mm, total height: 3,000 mm, * VOLUME TANDEM – EXTRA LARGE TANDEM TRAILER * Load area length approx. 8,400 mm Iisdpoyrv Hisfx Anwec * Internal height approx. 3,000 mm * Width approx. 2,480 mm * Large rear portal doors * Side aluminium drop sides * Raised front wall * Leaf-sprung suspension * Tyres approx. 80% tread remaining ---- Vehicle in good overall condition, previous German owners, non-binding offer ----

Condition: used, mileage: 732,200 km, power: 315 kW (428.28 HP), first registration: 03/2014, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,950 mm, Equipment: ABS, air conditioning, parking heater, soot filter, Leaf suspension, VEB, outside temperature display, differential lock, disc brake, sun visor, air-suspended seat, heated exterior mirrors, electric exterior mirrors, tachograph, PTO (power take-off), underride guard, twin tyres, used vehicle Iodpfx Aey N H Sfjnweic Vehicle no. 3350, ABS, TC, FH cab with 1 bed, roof hatch, auxiliary heater, automatic climate control, beacon, tyres: 315/80 R22.5, leaf suspension front & rear axles, EURO 5, manual transmission, VEB, 8x4 drive, wheelbase: 5,100 mm, Spitzer silo body 23 cbm, GHH Rand compressor, unladen weight: 12,860 kg, GVW: 32,000 kg. Inquiries welcome, subject to errors and prior sale.

Condition: used, mileage: 899,956 km, power: 315 kW (428.28 HP), first registration: 04/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2026, color: white, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,990 mm, Equipment: ABS, air conditioning, parking heater, soot filter, Leaf suspension, VEB, outside temperature display, differential lock, disc brake, sun visor, roof hatch, air-suspended seat, heated exterior mirrors, electric exterior mirrors, brake pad wear indicator, tachograph, PTO, underride protection, twin tires, used vehicle Iiodpey Ng Igsfx Anwjc Vehicle no. 3354, ABS, traction control, FH cab with 1 bed, roof hatch, auxiliary heater, automatic climate control, revolving beacon, tires: 315/80 R22.5, leaf suspension front and rear axles, EURO 5, manual transmission, VEB, 8x4 drive, wheelbase: 5,100 mm, Spitzer silo body 23 cbm, year: 1997, GHH Rand compressor, unladen weight: 12,860 kg, permissible total weight: 32,000 kg, For inquiries please, errors and prior sale excepted.

Condition: new, Product driven flow divider The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Includes 1 nozzle per exit (round, square, triangular or rectangular) with a maximum outer diameter of 40 mm Ijdpfx Anjzazr Tewjic Product temperature up to ± 80 °C With universal connection With pneumatique knife 3 exits belt width 25 cm With support frame in height adjustable New

Condition: good (used), Multigraf Touchline C-375 Automatic Creasing Machine This machine is in very good condition and fully functional. Purchased from a small digital printing house. Year of manufacture: 2014. This is the most efficient creasing system on the market, featuring a robust design. Made in Switzerland. Can be connected to the Multigraf Touchline TF-375 folding machine. Controlled via a touchscreen color monitor. Technical specifications: Maximum sheet size: 375 x 660 mm Min. sheet size: 105 x 148 mm Maximum speed: 6000 sheets/h Ijdpfxezdavle Anwsic Material weight: 80-400 GSM Power supply: 230 V Weight: 180 kg

Condition: used, Included in the scope of delivery: 1x load distribution plate, used Material color: Sendzimir galvanized Iisdpfsdvad Ejx Anwoc Suitable for manufacturer: Dexion Suitable for shelf depth: 800 mm Total length: approx. 980 mm C-profile dimensions: 185 x 65 x 35 mm Material thickness: approx. 4.00 mm Weight per piece: approx. 10.07 kg Opening for shelf feet: approx. 115 mm The load distribution plates are suitable for distributing the load over a larger total area. General information about the item: This item is offered for collection only. Any further transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm Isdpfx Asnbd Ursnwsic material color: sendzimir galvanized total length: approx. 1.865 mm center-center-hole: approx. 1.825 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), Scope of delivery includes: 01x C-profile, used Material color: Sendzimir galvanized Overall length: 7,200 mm Profile dimensions: C 360 x 100 x 35 x 10 mm Material thickness: approx. 4 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Isdpfx Anjw Hgwceweic General information regarding the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be inquired about with us separately depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x C-profile, used Iodpfx Anenbfapjweic Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm Material color: sendzimir galvanized total length: approx. 1.015 mm center-center-hole: approx. 975 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: excellent (used), Mr: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery: 01x C-profile, II. choice Manufacturer: SSI Schäfer Iijdpfsh T Avxex Anwsc Material color: sendzimir galvanized total length: approx. 1.510mm profile dim.: C 100x60x10 mm material thickness: approx. 3,0 mm Remark: - Since this is a used product may be damaged, holes, welds or other rust approaches may be present. General information about the item: This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: excellent (used), Year of construction: 2008, MACHINE DATA Type Machining center - Vertical Make SPINNER Type MVC 1100 Year of construction 2008 CNC control Siemens Country of origin Germany Delivery time immediately Freight basis ex location TECHNICAL DETAILS x-path 1100 mm y-path 510 mm z-path 510 mm rapid traverse 18/18/15 m/min Siemens control Type 840 D SL Shop Mill Table surface 1200x600 mm Workpiece weight 1000 kg Spindle speed - infinitely variable 8000 rpm Isdpfottu A Hox Anwoic Spindle holder: ISO 40 Tool changer 24 Cooling through the spindle 20 bar Machine weight approx. 8 tons Space requirement approx. 3000x2350 m Store mill Preparation for 4 axis

Condition: ready for operation (used), Year of construction: 2020, operating hours: 4,726 h, spindle speed (max.): 15,000 rpm, travel distance X-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle motor power: 51,000 W, table load: 500 kg, number of slots in tool magazine: 90, number of axes: 5, This 5-axis Quaser UX630 was manufactured in 2020. It features a powerful HSTec HM-15A spindle with a speed of 15,000 rpm and a robust rotary/tilt table capable of handling workpieces up to Ø630 × 540 mm. The machine is equipped with a 90-position tool magazine and includes advanced options like a Renishaw 3D workpiece probe. If you are looking to get high-quality machining capabilities, consider the Quaser UX630 universal machining centre we have for sale. Contact us for further details. • 5-axis simultaneous machining; B-axis ±120°, C-axis 360° continuous • Spindle: HSTec HM-15A built-in, HSK-A63, 162 Nm • Rotary/tilt table: Peiseler (Germany), Direct Drive, Ø480 mm; max load 500 kg; max workpiece Ø630 × 540 mm • Control: Heidenhain TNC 640 with options DCM, Kinematics Opt, LAC, DNC (Opt. 18) • Tool magazine: 90 positions (HSK-A63) • Through-spindle coolant: 20 bar Iiedoza E U Sopfx Anwjc • Heidenhain linear scales on all axes • Spindle operating hours: 4,726 • Note: Dust extractor shown in images is excluded Additional equipment • Renishaw 3D workpiece probe • Blum laser tool measurement • Schunk Vero-S zero-point clamping system • NP clamping system • BMO robot interface installed and programmed (robot not included) • HSK63 tooling included

Year of construction: 2011, condition: excellent (used), functionality: fully functional, F. R. C. ROLL IN 1P DX TN R1 | Roll-In Refrigerated Cabinet Manufacturer: F. R. C. Model / Type: ROLL IN 1P DX TN R1 Serial number: FR020022846 Product code: FRNC7U123011346 Year of manufacture: 2011 Power supply: AC 230V 50Hz 3.1 A Power: 0.68 kW Refrigeration capacity: 1.15 kW Refrigerant: R134a 380 g Climate class: T Iiodpfxszbxvfs Anwoc This professional Roll-In refrigerated cabinet from the Italian manufacturer F. R. C. is a technologically advanced device designed to maximize the efficiency of logistics and production processes in the food sector. Thanks to its floorless design and wide door opening, the cabinet allows for the direct entry of an entire bakery or catering trolley with prepared goods. This eliminates the need for time-consuming manual transfer of trays or containers, which directly reduces operating time and minimizes the risk of disrupting the cold chain. The design, based on a refrigeration unit operating in the high climate class T (tropical), guarantees thermal stability and reliable cooling even in difficult production conditions near ovens. The use of an efficient and environmentally friendly refrigeration system with R134a refrigerant ensures rapid cooling of the load while consuming relatively low electrical power (only 0.68 kW).

Condition: like new (used), Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: JSUP-1703, PAPER STRAW PRODUCTION LINES FOR BEVERAGE CARTONS (U-SHAPE & I-SHAPE) Location: Poland (European Union) Manufacturer: Zhejiang Jinshen Machinery Manufacture Co., Ltd. Year of Manufacture: 2023 Condition: Excellent – Installed, commissioned, tested and fully operational Availability: Immediate Complete Turnkey Production Solution for Beverage Carton Paper Straws Unique opportunity to acquire two nearly new production lines for paper straws used in aseptic beverage cartons (milk, juice and beverage packaging). The equipment was professionally installed and successfully commissioned in Poland. All machines are fully functional and available for immediate inspection. Line 1 – U-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Flexible straw forming machine JSFP-2021-30 U-shape automatic packing machine JSUP-1703 Microwave dryer 2 × circulation heaters Carton filling machine Conveyor assembly line Vision inspection system Capacity: up to 600–800 pcs/min Suitable for beverage carton applications requiring individually packed U-shaped paper straws. Line 2 – I-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Microwave dryer Vision inspection system I-shape straw packing machine 2 × carton filling machines Capacity: up to 800–900 pcs/min Designed for straight paper straws used in beverage carton packaging systems. Advantages ✅ Machines located in the European Union ✅ No waiting time for production in China ✅ No import duties or overseas shipping delays ✅ Installed and successfully tested ✅ Immediate availability ✅ Modern Delta PLC control systems ✅ Vision inspection systems included ✅ Suitable for food-grade production Technical Highlights Straw diameter: 3.0 – 8.0 mm Production speed: up to 100 m/min PLC control: Delta HMI touch screens Ethernet communication Automatic counting and monitoring Food-grade manufacturing standard Remote maintenance capability Ideal For Paper straw manufacturers Beverage packaging suppliers Dairy packaging producers Contract packaging companies Investors entering sustainable packaging markets Sale Options Iijdjzb Uwljpfx Anwjc Complete package (both lines) U-shape line separately I-shape line separately Inspection The equipment can be inspected under power at our facility in Poland. Additional photos, videos, technical documentation and machine specifications are available upon request. Contact METALTON Sp. z o.o. Poland For detailed information, pricing and viewing appointments, please contact us directly. Keywords: Paper Straw Machine, U Shape Straw Machine, I Shape Straw Machine, Tetra Pak Straw Production Line, Beverage Carton Straw Line, Paper Straw Packaging Machine, Sustainable Packaging Equipment, Straw Manufacturing Line, Beverage Packaging Machinery.

Condition: used, mileage: 25,000 km, power: 309 kW (420.12 HP), first registration: 03/2015, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2015, Equipment: ABS, electric window regulation, power assisted steering, power mirror, = Additional options and accessories = - EPS without coupling - High Beams - Hub Reduction - Immobilizer - PTO - Radio - Radio CD player - Speed limiter - Sper - Toolbox = Remarks = Mercedes Arocs 3242, 2015, 25000 km, Euro 6, 8x4, Fully leaf sprung, AMV 7450D concrete sprayer surface-mounted, Own engine, Compressor = More information = Suspension: leaf suspension Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels; Reduction: hub reduction Rear axle 2: Double wheels; Reduction: hub reduction GVW: 32.000 kg Make of bodywork: AMV 7450D = Dealer information = Bank data: Isdpjy Uy Rrefx Anweic Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, New machine warranty, in-stock item, original packaging, available for immediate delivery. Equipped with a safety system for solvent-based substances according to DIN 1539. Matching loading carts in stock (see photo). Contact us! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm Iisdpfxol Dw T Ao Anwec - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Max temperature: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for data logging via USB stick - Air circulation: 3600 m³/h - Exhaust air flow: 390 m³/h - Additional features: drive-in rails - Connected load: 39 kW - Net weight: 1150 kg - Including documentation, CE declaration Installation and commissioning available upon request. Inspection at our warehouse possible by appointment. We offer new and used industrial ovens. Contact us! Keywords: Oven, Ovens, Drying oven, Firing kiln, Heat oven, Heating cabinet, Industrial oven, Convection oven, Convection chamber dryer, Tempering oven, Preheating oven, Temperature oven, Drying cabinet, Chamber kiln, Curing oven, Forced-air drying cabinet, Forced-air oven, Solvent oven, Chamber dryer, Paint dryer.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, FANUC 18 M control Pallet changer table Isdpfx Anoxqmffoweic Weight approx. 12,000 kg

Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever height: 880mm length: 360mm width:400mm Iiodpfx Anev E Sazewsc weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.