Used Röhm 506 Vl Mk 6 for sale (50,659)

Condition: new, loading space length: 5,300 mm, loading space width: 2,300 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane ELLERMANN roll-off container according to DIN 30722-1 Standard container Type S 77 with crane platform Internal dimensions: approx. 6.5/5.3 x 2.3 x 2.0 meters (all dimensions are approximate) Usable volume: approx. 24 m³ Paint finish: RAL 7016 (anthracite gray) ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outer rollers and subframe made of INP 180 Outer rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support is reinforced with 10 mm knee plates ? Crane platform 20 mm thick on the end face, length approx. 1,200 mm Reinforcement on the end wall support and subframe on the inside Additional stiffening on the end support ? Crane cutout on the end wall (according to Fassi drawings) ? Bottom pan made of 5 mm St 37.2 (S235JR) ? Side walls made of 3 mm St 37.2 (S235JR) ? Rounded bottom pan, raised approx. 250 mm towards the side wall ? End profile made of sturdy round tube Ø 90 mm ? Spant spacing 750 mm Spant profile U 80 x 50 mm ? On both sides, 1 x transverse spant in the middle, fully welded ? Double-wing door at the rear with Dutch door latch and lateral safety central locking system according to UVV Safety central locking system extended to 2,000 mm Door latch with container door opening aid and hockey lock Additional opening handle on the left door leaf ? All-around tarpaulin and net hooks ? Container primed once on the inside, primed twice on the outside and painted twice in a single color on the outside ? UVV stickers with safety instructions ? Container inspected and approved according to DGUV Rule 214-017 (formerly BGR 186) ? Container inspection book (digitized) for documenting the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection when the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° all hydraulic cylinders are double-acting piston rods are hard-chrome plated double knee joint system with PROLINK (over-extension of the knuckle arm up to 15°) Credpfxjzq Iu Us Acmsf electronic overload shut-off device with FX500 6 functions RCH or RCS radio remote control (linear levers) with display and XP system emergency shut-off and optical alarm (90% and 100%) including digital slewing limitation, adjustable FASSI stability control FSC incl. LMB II pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable on one side separate hydraulic tank (90 l) with filter, mounted on the crane base extendable on both sides, support width 4.60 m, hydraulic support ? CE, incl. M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black load hook and attachment brackets (short / 500 mm) Transport position: folded across the direction of travel Dead point above the support beam Note: Observe on-board voltage / 12V or 24V, standard 24V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work spotlight on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose lines / eactive Slewing valve, only for cranes with rack and pinion Quick-action valve for the outriggers Additional cos

Condition: new, loading space length: 5,300 mm, loading space width: 2,420 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane Roll-off container in a platform design with aluminum sideboards and a permanently mounted Fassi loading crane ELLERMANN roll-off container according to DIN 30722-1 with aluminum sideboards and crane platform Platform tipper body type K 33 s Internal dimensions: approx. 6.5/5.3 x 2.42 x 1.0 meters, all dimensions are approximate Useful volume: approx. 13 m³ Paint finish: in RAL color according to customer's request ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outside rollers and subframe made of INP 180 Outside rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support reinforced with 10 mm gusset plates ? Crane platform 20 mm thick at the end, length approx. 1,200 mm Reinforcement on the end wall support and subframe inside Additional stiffening on the end support ? End wall inner height approx. 1,000 mm ? Floor made of 5 mm St 37.2 (S235JR) ? Floor spar spacing 500 mm Spar profile U 80 x 50 mm ? Outer profile as a hole strip (a hole Ø 40 mm every 200 mm), Loadable with 500 kg / hole, max 5 tons per side, operable from the inside ? Aluminum sideboards, approx. 1.0 meter high, foldable and removable, 1 x divided in the middle by a removable center post ? Aluminum rear flap, foldable and removable (cannot be driven over) with removable corner posts ? All-around tarpaulin and net hooks ? Container double primed inside and out and double painted in a single color inside and out ? Aluminum sideboards unpainted ? UVV stickers with safety instructions ? Container tested and approved according to DGUV rule 214-017 (formerly BGR 186) ? Container test book (digitized) for documentation of the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection once the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° All hydraulic cylinders are double-acting Piston rods are hard chrome-plated Double lever system with PROLINK (overextension of the knuckle arm up to 15°) Electronic overload protection device with FX500 6 functions RCH or RCS radio remote control (linear levers) with Display and XP system Emergency stop, as well as optical alarm (90% and 100%) Including digitally adjustable slewing limit FASSI stability control FSC including LMB II Pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable from one side Separate hydraulic tank (90 l) with filter, mounted on the crane base Extendable on both sides, support width 4.60 m, hydraulic support - CE, including M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black Load hook and attachment bridges (short / 500 mm) Driving position: folded transversely to the direction of travel Dead point above the support beam Caution: Note the on-board voltage / 12 V or 24 V, standard 24 V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work light on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose guides / eactive Crsdpfxezq Iu Io Acmjf Slewing valve, only for cranes with rack and pinion Quick-release valve for the extensions E

Condition: used, mileage: 751,000 km, power: 316 kW (429.64 HP), first registration: 02/2005, fuel type: diesel, empty load weight: 13,490 kg, maximum load weight: 12,510 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, loading space length: 4,000 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, low noise, onboard computer, parking heater, MAN TGA 28.430 6x4-4 tractor unit / flatbed truck with crane First registration: .000 km Cedpoy S S E Ajfx Acmjrf Axle configuration: 6x4-4 1st and 2nd axles: all-wheel drive, cardan shaft 3rd axle: steerable and liftable Long cab Manual transmission Air conditioning, auxiliary heater 2x trailer coupling Front maneuvering coupling Rear axle: air suspension Tires 385/65 R22.5, tread approximately 60% Tires 315/80 R22.5, tread approximately 60% Wheelbase 3900mm Flatbed length: 4000mm Side board height: 500mm Weight variant: 28,000 kg Technically permissible gross vehicle weight: 66,000 kg Unladen weight: 13,490 kg Crane: MKG HLK 201a3 Year of manufacture: 2004 Radio remote control 3 hydraulic extensions 2.80m / 6390kg 4.38m / 4180kg 6.33m / 2770kg 8.28m / 2060kg 10.23m / 1650kg Hook height approximately 14 meters German vehicle, first owner Export/net price: 28,900 Euros All information is without guarantee, errors and omissions excepted.

Condition: used, mileage: 751,000 km, power: 316 kW (429.64 HP), first registration: 02/2005, fuel type: diesel, empty load weight: 13,490 kg, maximum load weight: 12,510 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, loading space length: 4,000 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, low noise, parking heater, trailer coupling, MAN TGA 28.430 6X4-4 tractor unit / flatbed truck with crane Crsdpfxsy S S Evo Acmsf First registration: .000 km Axle configuration: 6X4-4 1st and 2nd axles: all-wheel drive with driveshaft 3rd axle: steerable and liftable Long cab Manual transmission Air conditioning, auxiliary heater 2 trailer couplings Front maneuvering coupling Rear axle: air suspension Tires 385/65 R22.5, tread approximately 60% Tires 315/80 R22.5, tread approximately 60% Wheelbase: 3900mm Flatbed: 4000mm Side boards: 500mm Weight variant: 28,000 kg Technically permissible gross vehicle weight: 66,000 kg Unladen weight: 13,490 kg Crane: MKG HLK 201a3 Year of manufacture: 2004 Radio remote control 3 hydraulic outriggers 2.80m / 6390 kg 4.38m / 4180 kg 6.33m / 2770 kg 8.28m / 2060 kg 10.23m / 1650 kg Hook height: approximately 14 meters German vehicle, first owner Export / net price: 28,900 Euros All information without guarantee, errors and omissions excepted.

Condition: used, mileage: 110,739 km, power: 118 kW (160.44 HP), first registration: 04/2014, fuel type: diesel, empty load weight: 4,950 kg, maximum load weight: 2,540 kg, overall weight: 7,490 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 3, loading space volume: 35 m³, loading space length: 5,990 mm, loading space width: 2,490 mm, loading space height: 2,410 mm, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), onboard computer, soot filter, traction control, Mercedes-Benz Atego 816 E6 - Box body Credpfx Asyrc Hcscmsf - Dimensions: 5.99 x 2.49 x 2.41 m - 3 seats - Manual transmission - Cruise control - ABS/ASR/ESP - Air conditioning - Leaf/pneumatic suspension - EURO 6 - Payload: 2,540 kg - Tires: 215/75R17.5 Very good condition. German vehicle. Export price.

Condition: good (used), mileage: 734,941 km, power: 488 kW (663.49 HP), first registration: 03/2021, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 7,160 mm, total width: 2,550 mm, total height: 4,020 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, - Heated mirrors - Digital tachograph - Electric - Trip recorder (control unit) - Globetrotter - Hydraulic system - Auxiliary drive - Pump - Radio/cassette - Slider - Lane keeping assist - Xenon lamp - Auxiliary braking system Number of axles: 3, Configuration: 6x4, Total tank capacity: 650 liters, Fifth wheel height: 114 cm, Fifth wheel: Slider, Number of locks: 2, Winch pulling capacity: 3 tons, Suspension type: Full air, Cabin type: Globetrotter, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Multi-colored, Heated mirrors, Lighting type: Xenon lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Engine power: 488 kW (654 hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Auxiliary braking system, Retarder brand: Voith, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat arrangement: 1+1, Seat upholstery: Leather, Seat adjustment: Electric, FH 16.650 // 6X4 // VOITH RETARDER // WB 320 // PTO+HYDRAULICS // XENON // LEATHER Transmission Transmission: VOL, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 13 mm; Tire tread depth left outer: 13 mm; Tire tread depth right inner: 12 mm; Tire tread depth right outer: 13 mm Axle 3: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 12 mm; Tire tread depth left outer: 13 mm; Tire tread depth right inner: 12 mm; Tire tread depth right outer: 13 mm Functional Pump: Yes Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damages: none Number of keys: 3 Financial information Leasing price: €1,205 per month (default, 72 months); Inquire for more information and terms Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality Credpfx Acszqac Djmjf • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: good (used), machine/vehicle number: 2812, Year of construction: 2011, load capacity: 45,000 kg, lifting height: 16,300 mm, mast type: telescopic, total length: 13,000 mm, total width: 4,220 mm, operation weight: 78,760 kg, additional equipment features: Dual tread, Weight system, Centralized greasing system, Hydraulic sliding cabin, Equipment: lighting, Kalmar DRF450-65S6X from Uniktruck Codpfxjyuhuwe Acmsrf Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-33 Wheel size – Steering wheel: 18.00-33

Condition: ready for operation (used), KUKA 1FK7101-5AZ91-1ZZ9-Z S07 servo motor, serial number: YFVN50667049013, used, in good condition, 100% functional, scope of delivery as shown in the photos. Cedpfxozqxvve Acmerf

Condition: ready for operation (used), KUKA 1FK7101-5AZ91-1ZZ9-Z S07 servo motor, serial number: YFW350685510018, used, in good condition, 100% functional, scope of delivery as shown in the photos. Credpfezqxv Nsx Acmsf

Condition: ready for operation (used), KUKA 1FK7101-5AZ91-1ZZ9-Z S07 servo motor, serial number: YFVN50665657004, used, in good condition, 100% functional, scope of delivery as shown in the photos. Crjdpfx Acjzqxvpemof

Condition: ready for operation (used), KUKA 1FK7101-5AZ91-1ZZ9-Z S07 servo motor, serial number: YFW350685510017, used, in good condition, 100% functional, scope of delivery as shown in the photos. Crsdpozqxv Ajfx Acmef

Condition: good (used), mileage: 327,000 km, power: 338 kW (459.55 HP), fuel type: diesel, wheelbase: 4,600 mm, fuel: diesel, fuel tank capacity: 415 l, brakes: intarder, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, Equipment: AdBlue, crane, = Additional options and accessories = - PTO = Further information = Lifting capacity: 4,980 kg Lifting height: 1,470 cm Codpfx Acszquy Demjrf Crane: HMF 2620-K5, year of manufacture 2017, mounted behind the cab Body manufacturer: JOAB APK (technical inspection): valid until 07/2027 Technical condition: good Optical condition: good

Condition: good (used), Year of construction: 1999, Brand: Kuag Model: Kuag RA 250 6E Year of manufacture: 1999 Voltage: 3x400 V Csdpfxoy Izbxe Acmjrf Serial number: 076999

Condition: good (used), Year of construction: 1999, Brand: Kuag Model: Kuag RA 250 6E Year of manufacture: 1999 Cjdpey I Am Nsfx Acmorf Voltage: 3x400 V Serial number: 077099

Condition: good (used), machine/vehicle number: 2964, Year of construction: 2012, load capacity: 45,000 kg, lifting height: 15,100 mm, mast type: telescopic, total length: 11,100 mm, total width: 4,160 mm, operation weight: 70,500 kg, additional equipment features: Warning triangle, Hydraulic sliding cabin, Equipment: lighting, Kalmar DRF450-60S5 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-25 Wheel size – Steering wheel: 18.00-25 Crsdsyuh Abjpfx Acmef

Condition: used, Krauss Maffei Motherboard Crjdpou Axihsfx Acmjf

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Cjdpfjxl Tp Tox Acmerf Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Csdpfsvl Skgex Acmjrf Working hours: 38.035 h

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Cedpfx Acexhfuaemjrf Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: good (used), machine/vehicle number: 3421, Year of construction: 2009, load capacity: 45,000 kg, lifting height: 14,000 mm, mast type: telescopic, total length: 11,200 mm, total width: 4,200 mm, operation weight: 73,700 kg, additional equipment features: Centralized greasing system, Automatic Greasing System for spreader and inner boom, Hydraulic sliding cabin, Equipment: lighting, Kalmar DRF450-65A5X from Uniktruck Crodpoy T Sd Iefx Acmsf Wheel type – Drive wheel: Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-33 Wheel size – Steering wheel: 18.00-33

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Cjdpfx Aoyxrt Tscmjrf

Condition: used, mileage: 6,200 km, power: 125 kW (169.95 HP), first registration: 04/2000, fuel type: diesel, overall weight: 9,000 kg, axle configuration: 2 axles, color: beige, gearing type: mechanical, emission class: euro2, total length: 7,980 mm, total width: 2,500 mm, total height: 3,500 mm, loading space length: 6,000 mm, loading space width: 2,400 mm, loading space height: 2,100 mm, Year of construction: 2000, Equipment: ABS, all wheel drive, parking heater, * MB 917 All-Wheel Drive 4x4 * Wheelbase 4250 mm * Weight 8,320 kg * Front axle load 4700 kg * Rear axle load 4700 kg * Leaf spring suspension * Drum brakes * Rear axle, H4 design, axle ratio i=5.25 * Power steering, reinforced LS 6/LS8 * Tow hitch G135 * Trailer load with fifth wheel trailer 8000 kg * Permissible trailer load with drawbar trailer 6500 kg * Vertical load at the coupling point 400 kg * Additional 12 V trailer socket * 7-pole trailer socket * Extended cab 50 mm * Cab facelift * Special conversion by workshops Wörth and Molsheim * Model series LK300 * Fog lights, halogen * Headlight range adjustment * Fuel injection pump for speed reduction * Engine brake, pneumatically operated * Generator 28V/80A * Flame arrester system * Noise encapsulation for engine, gearbox (top and bottom) * Deep-bed rims 11.00-20 for single tires * Tires 12.5 R 20 * Tire tread depth, front axle 15 mm * Tire tread depth, rear axle 15 mm * Spare wheel, like new * Co-driver's seat as a two-seater * Seat belts * Headrests * 3 seats registered * Frame extension by workshop Molsheim * 2 air conditioning units on the body * 2 additional diesel heaters * Diesel generator, soundproof, 50 Hz, 7000 W, 220 V, Voyager 8000 DM * Body dimensions 6000x2400x2100 mm * Fan in the rear body section Codpfjzqwrcsx Acmerf * Refrigerator * Seating area with table * Various storage compartments * Lockable external storage compartments * Doors on the body with lockable windows * and more * Subject to changes, errors and prior sale.

Condition: used, mileage: 724,000 km, power: 405 kW (550.65 HP), first registration: 10/2010, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: automatic, emission class: euro5, Equipment: crane, soot filter, Crane: ----- Retarder, air conditioning, lift, and steering axle, trailer coupling, LIV L160Z, year of manufacture 2007 Suspension: Air suspension Crodpszctyuofx Acmef

Condition: used, 2 clamping plates for KK 8, ribbed cast iron plate, diameter 800 mm and 780 mm Cjdpfx Aezq Dlvjcmorf

Condition: good (used), Year of construction: 2006, functionality: fully functional, 2 units debarking machines: 1x VK5068 and 1x VK32 in TOP CONDITION. VK5068 debarking diameter 100-680 mm / VK32 100-820 mm. Machine with Air-Seal technology, enabling adjustment of knife pressure during the debarking process. Crodpfx Aezfwllecmof