Used Ried Fiba 60 for sale (20,822)

Condition: used, Year of construction: 1962, pressure 060 t throat 220 mm stroke 6 - 94 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 340 mm table surface area 680 x 400 mm Giedpfxeyq Sl Sj Alxst hole in the table 120 x 70 mm table height over floor 750 mm passage to the back 290 mm ram surface 240 x 240 mm ram adjustment 57 mm power requirement 3,7 kW weight 2,8 t dimensions (WxDxH) 1,5 x 1,5 x 2,2 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: Giodpfx Aey Ii Dzelxjt All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: good (used), Manufacturer: KNOLL Gedek E Dxkspfx Alxeit Machine type: KTS-40-60-T-G Overall dimensions: 550 x 600 x 1800 mm Output:18,5 kW RPM: 2930 Loading capacity depending on viscosity.

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg Gijdpfsv Amw Nox Alxot

Condition: excellent (used), Year of construction: 2000, INDEX ABC 60 Spindle automatic CNC operational, fully functional Year: 2000 Condition: very good, operational Ready for immediate delivery Machinery runs without any problems. Technical details: Giedpfx Aley Nycdjxot 1-Spindle Automatic CNC Fized Headstock Lathe Serial number 400290 control SIEMENS 840 C passage: 65 m tool turrets with driven tools: 2 front and rear side machining chip conveyor: KS SRF 040.00 Bar loading: SCHMID LN 3200 Weight machine: 3500 kg. Overall size: 6500 x 1500 x 1800 mm. We are waiting for you in H.B.R. srl - ITALY

Condition: ready for operation (used), Specifications of NEUE Herbold SB 60/145 S7-3 Motor Power: 70kw Feed Opening: (approximately 620 mm x 565 mm) Rotor Configuration: 5-knife open rotor staggered Bed Knives: 2 Installed Screen: 3/16" (approximately 4.76 mm) Additional Equipment: Control panel with soft-start feature Voltage: 460V / 3-phase / 60 Hz Extras: Includes seven extra screens Gsdpfx Alsw R Un Asxoit We supply a wide range of granulators designed for plastics recycling, manufacturing, and waste reduction. Whether you need compact units for light-duty use or heavy-duty machines for high-output production, we have the right solution.

Condition: used, Year of construction: 2003, operating hours: 64,930 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 400 kg, rotational speed (max.): 12,000 rpm, Required space: approx. 3.5 x 2.5 x 2.5 m (L x W x H, without chip conveyor) Machine weight: approx. 6,300 kg Godpfxsy Ncnpo Alxeit

Condition: good (used), Year of construction: 2005, For sale: well-functioning aerial work platform working height 27 m trade-in and transport negotiable for more information call or send a message Gedpfx Asy Hx H Aslxjit

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, loading space length: 10,575 mm, loading space width: 2,440 mm, loading space height: 3,690 mm, loading space volume: 59 m³, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, * Alu box tipper body 10.5 m * Aluminum combi door with door and pendulum function, with pendulum frame and tarpaulin hoop * 2 grain outlets with covers * 1st and 3rd axle liftable * LED reversing lights * 6x 385/65R22.5 * PVC rolling tarpaulin cover * Rear ladder * Chassis HOT-DIP GALVANIZED * Wheels painted silver RAL 9006 Trailer can also be rented on request Gisdpsy Ii Nkjfx Alxet Subject to modifications and prior sale

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Gedsvn Tg Iepfx Alxjit Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Gsdpfek Rnq Nox Alxeit Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) Gijdpfjviwdmjx Alxjt The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 04/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Godpfx Aljywtxuoxoit Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Year of construction: 2023, condition: new, SEMIX Compact type concrete batching plants are designed for limited spaces and transportation easiness for overseas countries. SEMIX Compact 60 can fit on a two container and assembled in 3 days completely. SEMIX Compact 60 is equipped with 1500/1000 liters capacity Concrete mixers which can be a single shaft or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Gedpfx Asga D S Helxsit All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. The robust steel structure maintains long-life performance. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer mechanism. SEMIX Compact Concrete Batching Plants offers variety in aggregate transfer mechanism. Even in compact batching plants, users can choose either skip hoist mechanism or transfer conveyor for aggregate transfer. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate their CRM system. SEMIX's engineering team can int

Year of construction: 2023, condition: new, SEMIX Mobile 60 S4 is equipped with 1500/1000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Gisdpfxjgaxapj Alxet Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Condition: used, Year of construction: 1998, machine/vehicle number: 16510010, power: 738 kW (1,003.40 HP), overall weight: 100 kg, input voltage: 400 V, fuel: domestic gas H, For sale used gas burner Baltur BGN 60 P 248-738kW. 1998. Ser.Nr. 4073817. Gsdoy Nbqcepfx Alxsit

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 5,862 h, load capacity: 2,500 kg, lifting height: 6,640 mm, free lift: 2,100 mm, load center: 500 mm, mast type: triplex, construction height: 2,925 mm, Description STILL RX 60-25 Year of manufacture: 2017 Operating hours: 5,862 hours Load capacity: 2,500 kg Mast: Triplex with full free lift Overall height: 2,925 mm Free lift: 2,150 mm Rated lift: 6,640 mm Additional hydraulics: single-function Attachment: side shifter Giodpfxsxc U Ixs Alxjt Cab: fully enclosed cab with heater Hydraulic control: 2x mini levers Seat: MSG 75 air-suspended seat with heating Lighting: road-approved lighting (according to German regulations) Work lights: front and rear Blue spots: yes Battery: lead-acid 80 V (from 2023) Charger: compatible The machine is sold in a technically and visually reconditioned condition, with a valid safety inspection (UVV) and freshly serviced. Warranty is 6 months from the date of delivery, excluding wear parts and damage caused by the customer. The machine can be inspected and tested by appointment. Transport can also be offered optionally.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 7,385 h, load capacity: 2,500 kg, lifting height: 4,870 mm, fuel type: electric, mast type: triplex, construction height: 2,310 mm, gearing type: automatic, battery capacity: 620 Ah, battery voltage: 80 V, tire condition: 100 %, Equipment: UVV, adjustable boom, cabin, lighting, pallet forks, sideshift, trailer coupling, RX 60 - 25 BATTERY YEAR 2023 Fork positioner, triplex mast, full free lift, side shifter, Work lights front and rear, Joystick control New tires front and rear Weather protection cabin with heating Charger Excellent condition Gedpfeyfmmgjx Alxjit Freshly serviced

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 2,060 h, load capacity: 3,500 kg, lifting height: 4,960 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, gearing type: automatic, battery voltage: 80 V, tire condition: 100 %, Equipment: UVV, cabin, lighting, sideshift, trailer coupling, RX 60 - 35 L TRIPLEX MAST, FULL FREE LIFT, SIDESHIFT ROAD-LEGAL LIGHTING, WORK LIGHTS FRONT AND REAR BLUE SPOT FRONT AND REAR MINI JOYSTICK CONTROL WEATHER PROTECTION CABIN BATTERY CHARGER TYRES FRONT AND REAR NEW ON DELIVERY Gijdpfx Aeyfmd Selxot EXCELLENT CONDITION RECENTLY SERVICED

Condition: like new (used), functionality: fully functional, type: HZOS 100/60/1200/D/FU perm. pressure: 250 bar piston diameter: 100mm piston rod diameter: 60mm Gjdpfx Aleyxqmljxoit stroke: 1200mm

Condition: used, maximum load weight: 30,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2020, next inspection (TÜV): 09/2026, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, Equipment: Air suspension Safety: ABS * EBS * Disc brakes * Refrigeration unit Thermo King SLXi 300 * Operating hours: 6400 * Pallet box for 36 pallets * Lift axle Gjdpfxey Hy Rve Alxoit * Double-deck with beams * Temperature printer

Condition: ready for operation (used), Foot-mounted motor RÜETSCHI Switzerland Gijdpfjq H Rvvex Alxot 54 kW / 60 Hz / 3552 rpm Shaft 65 x 150 mm Weight 375 kg

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Connection: 3.55 kW / 230 V / 50 Hz External dimensions (WxDxH): 945 x 830 x 1025 mm External dimensions (WxDxH, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Useful height: 380 mm Pump pressure: 2.2 bar Spray volume: 4,200 l/h Load capacity: 100 kg Gisdpfx Asxiwc Sjlxot The soiled item to be cleaned is placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the cleaning solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump system draws the cleaning solution from the wash tank and feeds it through 6 stainless steel spray pipes equipped with overlapping flat jet nozzles. The item is thoroughly sprayed from all sides with hot solution during even rotation of the basket, which is driven by the jet action. After the cleaning cycle is complete, the unit shuts off automatically. Advantages: - 1 horizontally mounted pump - Flow rate: 70 L/min - 3 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket driven by water jet - Steam extraction - Stainless steel perforated plate with filter inlets above the wash tank - Water shortage safety device

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit Gedpfx Aeitvkuslxoit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,299 h, load capacity: 4,000 kg, lifting height: 4,650 mm, free lift: 1,700 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, battery capacity: 930 Ah, battery voltage: 80 V, DGUV certified until: 05/2027, fork length: 1,500 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 Electric Forklift with the following specifications: - Operating hours: 3,299 - Lifting capacity: 4,000 kg - Lift height: 4,650 mm - Overall height: 2,350 mm - Year of manufacture: 2012 STILL 4.0 ton electric forklift with semi-cab, 2019 battery, non-marking tyres (new at the rear), triplex mast with full free lift, side shift, 4th valve, four-lever control, road-legal lighting, 1,500 mm fork length, battery charger included. Price includes service according to STILL manufacturer specifications and valid UVV safety inspection prior to sale. The following options are available at additional cost: - Full cab - Other attachments (fork positioner, rotator etc.) Gjdpfx Asywd Awolxoit - Different fork lengths Inspection, demonstration, and test drive gladly offered by appointment. Sale is exclusively to traders. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). Further information and offers can be found on our website.