Used Rising Falling Incline With Arch And Forerun... for sale (9,245)

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed. Isdpfxjxb U Txj Ag Aetn

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 441.9 kW (600.82 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,570 kg, input voltage: 400 V, total width: 1,000 mm, total length: 4,200 mm, total height: 2,200 mm, warranty duration: 12 months, heating capacity: 456.9 kW (621.21 HP), Watercooled chiller/Heat pump Climaveneta FOCS2 W H CA E 1601 441.9 kW/456.9 kW Cooling capacity: 441.9 kW / 125.65 tons (12/7 — 35°C) Heating capacity: 456.9 kW / 129.92 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. Economizer. Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Bitzer CSW9563-140CVY-40D (screw) Type of refrigerant: R134a Dimensions: 4.2x1x2.2 m Weight: 3570 kg Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS Itjdpewyvnqefx Ag Aon - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2009, operating hours: 9,203 h, 2009 | MAN TGS 26.320 6x2-2 BL with Oil Steel Eagle 3526 (35m) | Used Truck-Mounted Boom Lift | 9203 hours | 115506 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 67500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points 62 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: When the truck is stationary for a long period, it sinks and has to be manually lifted to get it out of its alarm state; swapping the relays also works. The truck has not been tested on the road, there were electrical problems with the boom lift which were resolved during inspection. The machine is very sensitive to malfunctions, and a 24V emergency pump has been additionally installed. The truck has low mileage, otherwise, it is a functioning machine. It has recently been serviced by Oil Steel. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38953 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Itedpjydf Hpofx Ag Ajn

Condition: used, Year of construction: 2018, operating hours: 1,871 h, 2018 | Wacker Neuson EZ36 with 3 excavator buckets | Used Mini Excavator < 7t | 1871 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Isdpfx Agey D Tz Ae Aotn 💰 Buy Now for EUR 22500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 60 inspection points 59 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very good working and preservation condition. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39890 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW Iodpfx Aey S T T Ueg Ajtn turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: used, Year of construction: 2005, Technical details: spindle passage: 54 mm z-axis: 900 mm turning length: 900 mm swing diameter: 560 mm facing movement (x-axis): 290 mm control: Simens Sinumerik 840D sl spindle turning speed - continuous: 0 - 6000 U/min diameter of main spindle: 120 mm max. torque on the spindle: 190 Nm tool turret: Typ Sauter number of tool tapers: 12 operating pressure: 5 - 6 bar quill stroke: 130 mm diameter of quill: 110 mm rapid traverse: 40 - 50 m/min total power requirement: 37,5 KW weight of the machine ca.: 8,0 t dimension machine approx.LxWxH: 4,8 x 2,4 x 2,3 m • Modular machine design for efficient 2-axis and 4-axis shaft machining as well as chucking part machining • Equipped with pick-up spindle • High basic accuracy and thermal stability as prerequisites for hard turning and precision machining Iedpfx Agsy Ttyqe Ajtn • Prepared for automatic loading and unloading via gantry loader or integrated loading system • Separable machining area for simultaneous two-stage machining on the left and right main spindles • Lowerable tailstock can be combined with a counter spindle • Supports in-process and post-process measurement strategies *

Condition: used, Falling Ball Viscometer like Thermo HAAKE Type C THERMO ELECTRONIC CORPORATION Type 002-7580 Serial No.: With the Thermo falling ball viscometer, you can measure viscosity precisely without electricity, using only a stopwatch. It allows for accurate measurement of the viscosity of transparent Newtonian liquids and gases. Measuring principle: A ball moves by rolling and sliding inside an inclined cylindrical tube filled with the liquid to be tested. The time it takes for the ball to travel a defined measuring distance is recorded. By swiveling the measuring section, the return movement of the ball can also be used for measurement. The result is displayed as dynamic viscosity in mPa·s. Max. viscosity: 100,000 mPa·s Min. viscosity: 0.5 mPa·s Standards: DIN 53015, ISO 12058 Reproducibility: < 0.5% Itjdpfxexcbnrs Ag Ajn Thermometer: -1 °C to +26 °C (read-out accuracy 0.1 °C) Ball set Type 800-0182 with 6 balls (balls 1 and 2 made of borosilicate glass; balls 3, 4, 5 and 6 made of nickel-iron alloy) Recommended for: Chemical industry (polymer solutions, solvents, printing inks) Pharmaceutical industry (raw materials, glycerin) Mineral oil industry (oils, liquid hydrocarbons) - Inner glass tube (falling tube) damaged on one side at the screw socket (see images). Replacement part no. 002-6968 Dimensions of inner tube: outer diameter 20 mm; inner diameter 16 mm; wall thickness 2 mm; length 225 mm Dimensions (W x H x D): 170 x 310 x 220 mm Weight: 3.5 kg

Year of construction: 2001, condition: used, functionality: fully functional, Perfect condition including price: -Onion (any kind of type) & Garlic peeler -unpeeled product hopper -transportation conveyer (for peeled product, waste, inspection table with platform) All equipment is fully stainless steel I have also for additional cost a lot of spare parts. New Tecnoceam peeler 255 (without other equipment) cost almost 200k euro ! Automatic air peeling machine for garlic and onions – PAC 255 (995) The machine is suitable to peel a wide range of onions with spherical/elongated/flat shape, shallot and ginned garlic cloves intended for the fresh product market, for freezing or for preserves (in oil preservation/pickles, sauces, etc.). ADVANTAGES: • Homogeneous and product caring peeling; • High flexibility in particular for the treatment of a wide range of onion shapes and sizes; • Long-lasting abrasive components and quick replacement of peeling components; • A wide range of peeling nets is available to match different product calibres; • Complete automation and customisation of the continuous process cycle control panel adjustments: loading product time (so the inserted quantity), process time (peeling cycle duration); • Easy access to inner components for cleaning and maintenance; • Possibility to convert from onion peeling machine into garlic peeling machine and vice versa; Itsdpfx Agey I Dlms Aen • It is suitable for a multiple line (i.e. 2/3 machines 255(995) model in a row). Approximate production range: Onions 400 – 1500 kg/hour (for different sizes, see the brochure); Garlic 300 – 500 kg/hour Overall dimensions: 3.200 x 1.700 x H 2.300 mm (including automatic feed elevator) Processable product caliber: Min. diameter 25 – max. 100 mm; Max. stem length 30 mm Cycle duration: 1 – 2 minutes

Condition: ready for operation (used), Rotary cup filling and sealing machine R version (electronic cam control) Iodpfxjy A Tk Us Ag Aotn Approx. 2,500 cups per hour Filling volume: 10 ml - 1,200 ml Suitable for cups/buckets in the food and beauty sector (with or without handle) 8 stations

Condition: used, Lippert alignment conveyor inclined roller conveyor 2050-650-530 RA2490 Make: lippert Itjdoy Ih U Espfx Ag Aen Year of manufacture: Roller width (RB): 530 mm Nominal/outer width (NB): 650 mm Length: 2050 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 100 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Itedpfx Aeyvau Ejg Aen

Condition: new, Year of construction: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust incline conveyor in aluminum construction design for the reliable transport of piece and bulk materials—ideal for industry, trade, recycling, woodworking, and much more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveyor routes. Isdpfeyhzplsx Ag Aetn _____ Technical Data (Sample Configuration): ✔ Infeed height: customisable ✔ Inclined section: length freely selectable ✔ Discharge height: customisable ✔ Substructure with adjustable leveling feet & machinery feet or with transport castors → for compensating uneven surfaces / stable positioning _____ Design / Frame: ✔ Aluminum construction profile ✔ Double profile 90x45 mm or reinforced triple profile 135×45 mm ✔ Continuous wear plate 2.0 mm galvanized or 1.4301 stainless steel (VA) _____ Rollers / Drive: ✔ Drive and deflection rollers made from S235 steel, welded & machined ✔ Diameters: Ø100, 150 or 220 mm ✔ Shafts fixed with pillow block bearings ✔ Drive: shaft-mounted geared motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection: 230/400V, 50Hz, IP54 protection class (standard) ✔ Drive prewired up to the motor terminal box ➡️ Commissioning must be carried out by a qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with extra lateral stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: customizable ✔ Pitch customizable _____ Options / Accessories Available: ✔ Infeed plates ✔ Hoppers / infeed hoppers ✔ Bunkers / loading bunkers ✔ Discharge hoppers ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as required _____ ✔ Custom solutions made to your specifications ✔ Industrial quality ‘Made in Germany’ Dimensions, versions, and pricing on request Simply reach out—we provide fast and straightforward advice. Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer bespoke solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems and flat belt conveyors to incline conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture loading bunkers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers—all tailored to meet our customers’ specific requirements. We understand that every industry and every project is unique, which is why we tailor our solutions precisely to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf solutions—every problem gets the right answer! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together, we will shape the future of your production processes!

Condition: good (used), Year of construction: 1985, Offer 26046 Technical data: - 2 motor-driven rollers - Manual adjustment of the top roller - Shaft diameter: 30 mm - Shaft rotation: 6 rpm - Roller diameter: 88 – 108 mm - Bending capacity approx.: – flat steel 50 x 8 mm – square profile 20 mm – round pipe 42 mm - Drive: 380 V / 0.55 kW Iedpfxjyh I Afj Ag Aetn - with: – right / left operation - Tube roller set approx. 16 mm - Weight approx. 150 kg - Space requirement approx. W 650 x H 1300 x D 950 mm

Condition: good (used), Year of construction: 2017, functionality: fully functional, cooling capacity: 145 kW (197.14 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,535 kg, input voltage: 400 V, total width: 1,100 mm, total length: 3,800 mm, total height: 2,300 mm, warranty duration: 6 months, heating capacity: 150 kW (203.94 HP), Aircooled chiller/Heat pump YORK YLHA 150 TP 380T 145 kW / 150 kW Cooling capacity: 145 kW / 41.23 tons (12/7 — 35°C) Heating capacity: 150 kW / 42.65 tons (40/45 —7°C) Year of manufacture: 2017 Options: Heat pump. Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 3 pcs. Copeland ZP182KCE-TFD-455 (scroll) + 1 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. (frequency inverter) Hydraulic module: 2 pcs. water pump Wilo DPL40/150-3/2-IE2, buffer tank 152 l. Dimensions: 3.8x1.1x2.3 m. Weight: 1535 kg Working hours: 14618 / 19252 / 15204 / 19621 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Itjdpfoykqv Njx Ag Ajn The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, ? Polygonmach PVB150 Mobile Concrete Plant | Cold asphalt plant, RCC mixing plant, soil compound mixing plant. Emulsion mixing plant ? Polygonmach PVB150 is a next-generation mobile concrete plant designed to meet the demands of modern construction projects for speed, flexibility, and cost-efficiency. It offers dual-mode production – both Volumetric and Batch type operation – on a single platform, delivering perfect compatibility for all project types. ✅ Dual-Mode Flexibility: • Volumetric Mode: On-demand, instant production up to 200 m³/hour directly at the site • Batch Type Mode: Precision recipe-based production up to 100 m³/hour ✅ Key Features: • Fully Automatic or Manual Operation: User-friendly control panel allows seamless control • Precision Weighing System: Ensures accurate dosing, minimizes material waste • Multiple Mix Recipes: Easily switch between different mix designs • Separate Storage Bins: 3x8 m³ aggregate hoppers, 5-ton cement silo, water & additive tanks • Filling Conveyor: Fast and efficient loading • Quick Setup: Ready to operate in just 10 minutes • Fully Mobile: Maximum ease in site-to-site transportation • Low Logistics & Transport Costs: On-site production eliminates ready-mix losses • Sustainable Production: Mix only what you need, when you need it • Recycling-Friendly: Supports the use of recycled materials when needed ⸻ ? Multi-Purpose Capability – One Platform, Many Solutions: In addition to concrete production, the PVB150 is engineered to serve as: • Mechanical Stabilization Plant • Cold Asphalt Mixing Plant • Emulsion Mixing Plant • Soil Compound Mixing Plant This multi-functional system makes Polygonmach PVB150 the most versatile solution on the market for road construction, infrastructure development, and short-term or small-to-medium scale projects. ⸻ ?? 100% Made in Turkey | Smart Technology | High Performance | Eco-Friendly Operation ✅ Replace fixed plants with a smarter solution. ✅ Reduce setup costs, increase mobility, boost site efficiency. ⸻ ? Contact us today and transform your jobsite! ? ? ? Itsdpfxjyf Dbns Ag Aen

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 45 kg, permissible axle load (axle 2): 45 kg, permissible axle load (axle 3): 45 kg, loading space width: 3,000 mm, loading space height: 1,170 mm, total width: 3,000 mm, total height: 1,170 mm, suspension: hydraulics, tire size: 215/75R17.5, wheelbase: 1,500 mm, color: red, Year of construction: 2026, Main Features Year: New Universal Gooseneck SH 35/2 Loading platform: 3,700 mm x 2,440 mm 3.5 inch king pin Hydraulic lifting and lowering Hydraulic support cylinders Coupling height: 1,450 mm Integrated lashing points Lashing rings Spare wheel + spare wheel holder Hydraulic locking pin Automatic lubrication for gooseneck with Beka-MAX pump Hatz Diesel PPU Hatz single-cylinder diesel engine (silent pack) @ 9.6 kW 240 L hydraulic oil tank, powder coated 35 l/min flow rate and max. working pressure of 250 bar Three sizes of quick couplers for pressure connection Three sizes of quick couplers for tank connection Electric RPM control THP SL 3 Max. axle load: 45,000 kg per axle Total axle load: 3 x 45,000 kg = 135,000 kg GVW: 135,000 kg Unladen weight: 10,650 kg Payload: 124,350 kg Total length: 4,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 4 Max. axle load: 45,000 kg per axle Total axle load: 4 x 45,000 kg = 180,000 kg GVW: 180,000 kg Unladen weight: 13,850 kg Payload: 166,150 kg Total length: 6,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) Itsdex S Evbepfx Ag Aon THP SL 5 Max. axle load: 45,000 kg per axle Total axle load: 5 x 45,000 kg = 225,000 kg GVW: 225,000 kg Unladen weight: 17,250 kg Payload: 207,750 kg Total length: 7,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 6 Max. axle load: 45,000 kg per axle Total axle load: 6 x 45,000 kg = 270,000 kg GVW: 270,000 kg Unladen weight: 19,800 kg Payload: 250,200 kg Total length: 9,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) Low Profile Deck FB 300 - 10,000 mm, without mechanical coupling, non-driveable - Payload rating in combination (6+6): 300 t - Height 300 mm, length 10,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - Bogies for modular configuration - Dead weight approx. 21,300 kg - Incl. hydraulic locking pin for connecting modular bogies lengthwise 1 x Low Profile Deck FB 250 - 8,000 mm, with mechanical coupling, non-driveable - Payload rating in combination (6+6): 170,000 kg - Height 250 mm, length 8,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - 1x extension for low profile deck, 4,000 mm - 1x extension for low profile deck, 5,000 mm General Information Year of construction: 2026 Axle Configuration Tyre size: 215/75 R17.5 Axle brand: BPW Eco Plus Suspension: hydraulic suspension Center axle 1: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 2: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 3: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 4: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 5: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 6: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Functional Deck height: 117 cm Extendable chassis: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Damages: none Financial Information...

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 24.7 kW (33.58 HP), type of input current: three-phase, type of cooling: air, overall weight: 265 kg, input voltage: 400 V, total width: 570 mm, total length: 1,450 mm, total height: 1,700 mm, warranty duration: 12 months, heating capacity: 26.1 kW (35.49 HP), Aircooled chiller/Heat pump CLIMAVENETA I BX N 025T HASNV 24.7 kW/26.1 kW Cooling capacity: 24.7 kW / 7.02 tons (12/7 — 35°C) Heating capacity: 26.1 kW / 7.42 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi ANB52FFTMT (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo Yonos PARA HF 25/10 (inverter), expansion vessel. Dimensions: 1.45x0.57x1.7 m. Weight: 265 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Itjdpjxwmg Aefx Ag Aen The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, mileage: 403,000 km, power: 243 kW (330.39 HP), first registration: 11/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro5, loading space length: 7,676 mm, loading space width: 2,528 mm, loading space height: 2,696 mm, Year of construction: 2012, Equipment: air conditioning, Manufacturer Volvo Model FM 330 4x2 7,7 m Curtainsider and Taillift Year 2012 Itsdpfsx R Rn Hjx Ag Aen Condition Good Serial Number YV2J1D1A4DA736557 Ref. nr. 1508060 Reg. date: 16-11-2012 Last seen: 18-11-2025 Hk: 330 Km: 403000 Gearbox: I-shift Eurotype: 5 Diesel tank: 1 Tank liter: 530 Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Engine brake: VEB Tire Size: 315/70R22,5 - 315/70R22,5 Front suspension: Air Suspension rear: Air Wheelbase: 5600 mm Toolbox: ? Total weight: 18000 Kg Net weight: 9150 Kg Load capacity 8850 Kg Inside length: 7676 mm Internal width: 2528 mm Interior height: 2696 mm Lift Brand: Zepro Lift capacity: 2500 Kg

Year of construction: 2010, condition: used, Year of manufacture: Mar 2010 Itedpfx Ajv Sra Ieg Asn New: No

Condition: good (used), Tom Chandley BOMK4MTU3 Oven and proofer Serial: 10837 Iedpfx Asv T Acpeg Aetn Stainless, 15.5Kw, Three deck oven with proofer, adjustable temp and timer controls, chamber size 900mm x 700mm x 180mm, stone based, mobile, 3Ph

Condition: ready for operation (used), Suitable for: - Food: fluid and viscous products such as sauces, tomato sauces, pâtés, mayonnaise, ketchup, dressing - Chemicals: pesticides, detergents, fertilizers, herbicides, paints, varnishes Itodpeyxpqcjfx Ag Asn - Cosmetics: shampoos, creams, shower gels, oils, lotions Piston filler with 4 volumetric filling heads, with upward dispensing Manual cap placement by operator Automatic capping unit Incl. 80-liter heated tank with mixer Up to 2,000 bottles per hour

Condition: used, Year of construction: 2015, Interroll roller conveyor falling conveyor 1470-2155-490-420 RA1981 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: selectable between 1470 mm and 2155 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: no drive Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Itsdpfx Aek Abpzjg Aen For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Interroll roller conveyor falling conveyor 1470-2155-490-420 RA1981 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: selectable between 1470 mm and 2155 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: no drive Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. Itodpfx Agjk Abp To Aon With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Interroll roller conveyor falling conveyor 1470-2155-490-420 RA1981 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: selectable between 1470 mm and 2155 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: no drive Frame height: 115 mm Optionally available: Iedpfxek Abqbo Ag Ajtn Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Interroll roller conveyor falling conveyor 1470-2155-490-420 RA1981 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: selectable between 1470 mm and 2155 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: no drive Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. Itjdpok Abqfsfx Ag Ajn We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics