Used Rittal Sz 4140.840 for sale (561)

Year of construction: 2019, condition: new, functionality: fully functional, Root reducer – new (in storage) consisting of: 1. Tapered roller conveyor Plant data: Wood lengths: 2 m to 4.6 m (main length: 2.7 m), extendable to 8 m (optional, at an extra charge) Log diameter: 200 mm to 1,100 mm Wood types: Softwood or hardwood, max. individual log weight 2 tons Piece rate: up to 5 pieces/minute, of which with root reduction: up to 2 pieces Operation: 1-shift operation Dimensions: Length: approx. 5 m Roller width: 800 mm Description: Tapered roller conveyor for roundwood with housing bearing (nominal diameter: 60 mm); Outer diameter of the tapered rollers: 450 mm; drive chain: roller chain 5/4"; integrated 4-arm, hydraulic lifting device for transferring to the root reducer, steel housing plain bearing; drive of the tapered roller conveyor via gear motor with reduction gearbox and soft start; integrated light barriers (2 pieces) for log positioning 2. Root reducer Dimensions: Length: approx. 7 m Description: - 3 driven chain beds, drive chain: roller chain 6/4" with square tooth attachment - Drive via gear motor - 2 support blocks with non-driven rollers (roller bearing) - hydraulically pivoting clamping device for clamping from above with V-bed - Drive chain: roller chain 6/4", drive via gear motor; - housing-mounted milling shaft with reversible, interchangeable knife blocks (4 cutting edges per knife block), drive via three-phase motor (drive power: 75 kW; flexible tire coupling) Dodpjzcaqtsfx Adrocn - Star-delta operation for the drive motor (energy-saving mode for idle operation - automatic switchover during the reduction process) - Milling shaft length: 1,200 mm, mounted on a rotatably supported, adjustable drive rocker (hydraulic drive) - 4-arm lifting device, hydraulically driven - integrated hydraulic unit (15 kW) - integrated log diameter measurement for automatic milling time calculation (control unit included in item 2), for wood lengths under 3.5 m, the support position of the log must be adjusted (reduced reduction length) Reduction length for log length of 2.7 m: 0.7 m, for log length of 3 m: 0.9 m 3. Control system - Control cabinets in grounded design, equipped with control units for all drives of items 1 and 2, - Power supply: 3x400 VAC; Rittal control cabinet; motor contactors and contactors from Siemens - Freely programmable controller Bernegger & Rainer - Control cabinets completely wired and tested - Reserve slots for approx. 5 drives - Circuit diagram for the system - Signal exchange via potential-free contacts - Emergency stop system; including necessary sensors; manual operation option Control function description: - Automatic reduction operation, for log lengths under 3.5 m, an adjustment of the support position (wood alignment) is required (reduced reduction length) - Automatic log positioning via the tapered roller conveyor, the reduction process must be activated manually (reduction command) Price: ex works

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Dodpfx Adjzl Hbcorocn Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose–table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island recognition - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: good (used), Offer 35511 Dcodpfx Ajxdi A Hedrjn Technical specifications: - 8 ball bearing drawers, 90% extendable - Drawer size: approx. W 1010 x D 650 mm - Drawer heights: 2 x H 55 mm; 3 x H 80 mm; 3 x H 130 mm - No key available - Cabinet space requirement: approx. W 1120 x D 780 x H 1000 mm - Weight: approx. 80 kg

Condition: used, empty load weight: 9,600 kg, maximum load weight: 30,400 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 12/2011, loading space length: 13,200 mm, loading space width: 2,500 mm, loading space height: 800 mm, suspension: air, tire size: 205/65R17.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles self-steering, ABS (anti-lock braking system), extendable, lashing eyes, drive-on ramps can be fitted, front support legs, rear support legs, lateral aluminium side guard, storage box. Body: 4-axle low-bed semi-trailer with attachable drive-on ramps, SAF axles, 3rd and 4th axles self-steering, 13 pairs of lashing rings, 10 pairs of preparations for plug-in stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm loading height in the low-bed area, low-bed length approx. 9,500 mm retracted, next technical inspection (TÜV) due, aluminium ramps available at extra cost of €1,500. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted. Dcodexxkqzepfx Adron - .

Condition: used, Offer 35504 Technical data: - 7 pieces of ball-bearing drawers, each 90% extendable - Drawer size approx.: W 510 x D 600 mm each - Drawer heights: 1 x H 85 mm; 1 x H 65 mm; 5 x H 125 mm - No key available - Required cabinet space approx.: W 650 x D 700 x H 1020 mm - Weight: 80 kg Djdpfx Aewzvlfsdrjcn

Condition: used, empty load weight: 8,450 kg, maximum load weight: 26,550 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2007, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Hangler platform semi-trailer, 3 axles | steering axle | BPW axles with disc brakes | GVW 35,000 kg | spare wheel holder + spare wheel | toolbox | extendable by 3 metres | tyres: 385/65 R22.5 | Subject to errors, input mistakes, and prior sale. Dedswz Ekkspfx Adrscn

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 25-50 kg/cycle - Electric demands: 0,6 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 710x800x2000 mm - Weight: 100 kg Doded Atipspfx Adrjcn - Number of trays: 11pcs - Dimensions of trays: 570x570 mm - Drying surface: ~3,6 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. Requires minimal maintenance.

Condition: used, Year of construction: 2012, operating hours: 8,180 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 150 mm, mast type: simplex, construction height: 2,665 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Load center of gravity: 500 Fork width: 100 mm Dcjdpfjr Irudjx Adrjn Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Reconditioned without warranty Technical condition: Good Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Description: Machine is optically and technically refurbished. Maintenance incl. drive & engine oil renewed. UVV inspection renewed. Sideshift, 3rd valve, rear working lights, front working lights, roof cover, windshield, half-cab,

Condition: used, Gear motor, electric motor -Speed: 15.5 rpm -Power: 0.11 kW Djdpoc Uz Hwjfx Adrjcn -Construction: B5 angle -Diameter shaft: Ø 18 mm -Protection class: IP 54/65 -Number: 1x geared motors available -Price: per piece -Dimensions: 325/150/H145 mm -Weight: 9.2 kg

Year of construction: 1980, condition: used, Max. tensile force: 10 tons Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 27 m/min Max. workpiece diameter: 320 mm Dcjdpecdtplsfx Adrsn Number of units: 3 Weight: 4.8 tons Automatic tool feeder Hydraulic draw-in head and end piece holder locking system Automatic feeding device for workpiece diameters up to 100 mm Magnetic belt chip conveyor

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Dcodpefz Dt Nofx Adron - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. Djdpfsfz Dubox Adrocn All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations Dedpfx Adjfz Nb Terocn The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations Dsdefz U S Eopfx Adrocn The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 1995, condition: excellent (used), Blum Metapress ZMM 3320 Boxpress -Metabox year 1995 S/N AA77 Length of runner min 270 mm, max . 650 mm Carcase width min. 300 mm, max 1200 mm Dodpfx Adjfgrgrerjcn Thickness of bottom min.13mm, max. 16 mm Pneumatic press horizontal and vertical for BLUM Metabox Systems Dimensions of machine LxBxH approx. 2000x1200x2000mm in very good condition Weight 700 kg

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept Dcodjh Eiw Ijpfx Adrsn The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Request more information

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: Dsdeh Hnp Dopfx Adrjcn - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, Pea Washing Line Dodpfx Adoxq R Eperjcn Complete pea washing installation, consisting of a vibratory trough with a stainless steel work platform and a drum pea washer. The set is designed for the preliminary and thorough cleaning of vegetables from contaminants, sand, and organic residues. The set includes: 1. Vibratory trough with stainless steel work platform Trough width: 1020 mm Overall dimensions: 4150 × 2800 × 1750 mm 2. Pea washer Internal tank dimensions: 1050 × 1100 × 400 mm Overall dimensions: 4900 × 2400 × 2700 mm The pea washing installation is designed specifically for use in vegetable processing lines. The vibratory trough ensures uniform feeding and pre-cleaning of the product, while the water washer enables intensive rinsing and separation of contaminants.

Condition: used, functionality: fully functional, machine/vehicle number: 54710003, Adast Domináns 547 sz.:54710003 Dcedjunrq Ujpfx Adrjn 4 szín alkohol pult porzó B/3

Condition: as good as new (ex-display), 1.000 m barely used HDPE dredge pipe with lose flanges 500 m used HDPE dredge pipe with fixed flanges Dcsdpfof Tdn Uex Adron

Condition: new, Bernardo HV 80 OSZI edge grinding machine Work table: 850 x 300 mm Table height adjustment: 90 mm Belt length: 2510 mm Belt width: 150 mm Belt backing: 950 x 200 mm Grinding unit lockable at: 90° / 0° Dcjdod Tb U Sepfx Adron Belt speed: 16 m/s Auxiliary table: 300 x 250 mm Dust extraction connection: Ø100 mm Roller diameter: 110 mm Motor output power: S1 100% 1.5 kW (2.0 HP) Motor input power: S6 40% 2.1 kW (2.8 HP) Voltage: 400 V Machine dimensions (W x D x H): 1400 x 680 x 1220 mm Weight approx. 148 kg

Condition: excellent (used), Power resistor, wire potentiometer, resistor, potentiometer, dual potentiometer -Manufacturer: Siemens, unused potentiometer in original packaging -Type: ASZ12.803 Quantity: 1 piece available -Dimensions: 65/50/H30 mm Dodpfx Adogh Ixherecn -Weight: 0.05 kg

Condition: used, mileage: 564,000 km, power: 375 kW (509.86 HP), first registration: 04/2014, fuel type: diesel, empty load weight: 12,335 kg, maximum load weight: 13,665 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,600 mm, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, parking heater, power assisted steering, seat heater, spoiler, traction control, trailer coupling, Vehicle location: Bovenden, BigSpace, Mercedes PowerShift 3, Lg. House, 1x comfort seat, 2x recliner, heated seats, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, electric glass roof, auxiliary heating, air horn, ABS (anti-lock braking system), traction control system (ASR), retarder, power take-off, roof spoiler, raise+lower, driving lights, work lights, storage box, air suspension, air+light trailer hitch, aluminum tank, last axle liftable, U-protection, aluminum side guards, hyd. Aluminum side guards, hydraulic transverse locking, green environmental badge Wheelbase: 4600 mm Body: Hywa 22 55 SZ roll-off system for containers up to 6.6 m, 1450 mm hook height can be increased to 1,570 mm at extra cost, roller height approx. 1280 mm. Front axle air-suspended, 8t front axle, rear axle disc wheel 485 Hypoid 13t, 7.5t trailing axle relievable/liftable, electronic brake system with ABS and ASR, disc brakes on front and rear axle, secondary water retarder, condensation water monitoring for compressed air system, additional stabilizer rear/trailing axle, aluminium front underride guard, leather steering wheel, comfort bed top and bottom, ambient lighting, residual heat utilization, hot water auxiliary heating, additional thermal insulation, sliding/tilting roof electric glass version, PSM, communication interface (KOM), starting aid, Mercedes star illuminated, BigSpace, comfort locking system, rain/light sensor, Power drive program, Mercedes PowerShift 3, radio/navigation system, axle load measuring device, tank capacity: 630l, bi-xenon headlights, LED daytime running lights, cornering lights, headlight cleaning system, ESP, refrigerator, rear engine power take-off c hydraulic pump ISO 7653D. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dsdpfsvhi Saex Adrscn - .

Condition: used, mileage: 899,000 km, power: 315 kW (428.28 HP), first registration: 11/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2024, brakes: retarder, color: blue, gearing type: automatic, Year of construction: 2014, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Special equipment: Airbag driver's side, Audio system: CD radio (Bluetooth), Compressed air connection in cab, Compressed air tank aluminum, Compressed air horn, Driver assistance system: Attention-Assist (drowsiness detection sensor), Driver assistance system: Brake assist (Active Brake-Assist 3), Driver assistance system: Lane departure warning system, Cab: with air suspension, Suspension: front springs 7.5 t, 2 leaf, Fleetboard vehicle computer, Tinted windshield, Info display 12.7 cm with additional display, Cabin filter construction site vehicles, LM rims 11.75x22.5 (ALCOA matt, on front axle), LM rims 9.00x22.5 (ALCOA matt), mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, reinforced engine brake, auxiliary drive MB 131-2c, frame lowering without bellows residual pressure control, tire pressure control system, retarder, automatic circuit breaker, seats in cab: Driver's seat comfort swivel seat, sun visor outside, sun protection roller blind side window, driver's door, socket 12V in passenger footwell, socket 24V / 25 A in passenger footwell, preparation / switch lift axle on semitrailer / trailer, preparation fleetboard, preparation cool box / refrigerator, oil cooler gearbox Dsdpfxjvhzffs Adrscn Further equipment: EURO 6 emissions standard, axle configuration: 4x2, axle load front axle 7.5 t, Actros 4, trailer socket 24V / 15-pin, work lights, exhaust to right outside, exterior mirrors electr. adjustable and heatable, differential lock rear axle, compressed air unit medium, cab: width 2.30 m, cab: L StreamSpace, cab floor with engine tunnel 320 mm, suspension: leaf / air, suspension: front spring block aluminum, electric window regulator, generator 100 A, transmission 12-speed - type: G 211-12, urea tank (AdBlue): 60 ltr, rear axle disk wheel 440, body/body: tractor unit, comfort couch below, comfort locking system, communication interface, 3-part mudguards, radiator blind, regulated power steering pump, 2-stage air compressor, engine 10.7 ltr. - 315 kW R6 diesel (OM 470), engine compartment encapsulation, ramp mirror, residual heat utilization, front and rear axle disc brakes, seat cover / upholstery: fabric, seats in cab: passenger function seat, seats in cab: Driver's seat backrest can be folded down, Voltage transformer 24V / 12V 10 A, Front splash guard, Front axle stabilizer bar, External left-hand storage flap, 24V cab socket, Tachograph / EC tachograph, Door extension for cab, Aerodynamically shaped underbody panelling, Front underride guard, CB radio preparation, Toll collection preparation, Cranked front axle, Regulated water pump, Perm. Gross vehicle weight 18.00 t, Auxiliary heating (water)

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials. Throughput is highly dependent on the screen and the input material: - up to 60 kg/h for EPS with a 15 mm screen *the coarser the screen, the higher the throughput. Motor 9.2 / 11 kW - 400 Volts, sturdy steel construction, hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (8), (10), 15, 22, 26, 30, 40, or 60 mm with electric drive, star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge nozzle 150 mm, optional for plastic or corrugated pipes, blowing distance approx. 12 m, Dcodpfxeh S H T Uo Adron chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) weight approx. 240 kg, Spare parts prices and options: 24 hardened blades, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 (net) 1 cover, €290 (net)