Used Ryko Gmbh Se5-S for sale (103,667)

Condition: new, -􀂾automatic screw feed -􀂾automatic switchoff for hopper movement via trail regulation - automatic depth disconnection - pneumatic drive and control Csdpfx Adey Aiaxj Nerb - pneumatic screw ejection and emergency stop - foot control - protection-frame (safety device)

Condition: new, Year of construction: 2022, functionality: fully functional, total height: 3,680 mm, operating pressure: 6 bar, final pressure: -0.6 bar, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, lifting speed: 166 mm/s, 2x Hova column-mounted slewing jib crane  2220847.03  max. load 50kg  Outreach 4m  Individual aluminum jib lengths (depending on load capacity)  Smooth-running trolleys with guide and counter-pressure rollers  Individual load capacities  Swivel range up to 270° also adjustable Crodpet I S Slofx Ad Neb  Standard with HOVA chain hoist and vacuum lifter  Special solutions through in-house production  Surface-mounted aluminum column swivels  Suspended aluminum column swivels  Telescopic swivel arms  Articulated arm swivels  Mobile version for transportation by forklift or crane 2x HOVAMAT vacuum suction cups HV 50kg/90°  2220847.01  Horizontal and vertical transportation of panels of all materials  Individual load capacities with overload protection  Infinitely variable lifting speed 0-10 m/min  Operating voltage 1x230V/50Hz  Operating pressure min. 6-7 bar filtered compressed air  HOVA special handling handle for 1-hand operation with all commands for the lifting unit and vacuum lifter  Low dead weight due to compact design  Suction plate arrangement with longitudinal and cross beam depending on requirements  Can also be picked up using magnets, mechanical or pneumatic grippers  Additional safety with HOVAMAT + and permanent weight monitoring using scales. Lowering cut-off for sleeping chain, load can only be released when set down, display for weight indication possible.  Optional: energy-saving unit 2x vacuum suction cups: €6,000 each 2x column swivel: €6,500 each The sale takes place under exclusion of any warranty.

Year of construction: 2026, condition: new, Offered is an attachment block broom Kehrfix in different versions from 1.50 m to 4.00 m width. A pick-up must then still be discussed separately if this is desired (e.g. pallet fork pick-up, shovel hook or Euro pick-up). An attachment block broom for forklifts, wheel loaders, tractors, mini-loaders, mini-dumpers and many other vehicles and equipment! With various attachments for quick mounting on a variety of vehicles, the KehrFix is the perfect aid for keeping larger areas clean. Crjdpfsh T A Tnsx Ad Njb The KehrFix push brooms are a professional choice for easy and effective sweeping and cleaning. The rugged KehrFix is designed to get the job done quickly and thoroughly in every conceivable application. KehrFix push brooms are high-quality, durable, maintenance-free and universally applicable sweeping systems.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) Cjdpexuvk Eofx Ad Nerb - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm Codpfxeywg Sbo Ad Nsrb - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 1972, condition: not inspected (used), machine/vehicle number: SW3a DP. U. AP. 40923 , sheet shear : A used sheet shear (swinging cut) from the manufacturer Wieger. At the foil or sheet shearing , the cutting gap does not need to be adjusted for cutting different sheet thicknesses. Cjdpfx Aded Eg Ngo Norb Max. Cutting Power = 10 mm Model or Type: SW3a DP. U. AP. 40923 (with lamellae working clutch with brake, electropneumatically actuated) Construction year: 1972 Condition: used (good)

Year of construction: 1989, condition: ready for operation (used), machine/vehicle number: K 1283, A used bending machine from the manufacturer HMK. Cedpfxsd Eg R To Ad Njrb The pressing power up to 500 t Year of construction: 1989 Machine number: 1283

Condition: used, functionality: fully functional, Stainless Steel Foam Sprayer V2A, 24L usable volume with 3m compressed air hose - Cleaning and derusting of large surfaces with durable foam Crodpeyvz D Aefx Ad Neb - Spray efficiency of 7.3 m² per minute - Operates with up to 8 bar compressed air Quality Seal Systems Corrosion-resistant stainless steel Tank material: V2A stainless steel Compressed air connection: up to max. 8 bar Pump: max. 8 bar Delivery rate: 90 - 200 ml per minute Sale exclusively to business customers, commercial traders, self-employed professionals, and public institutions—consumer purchases excluded. The unit is pre-owned and sold as-is, with any liability for material defects excluded. The sale is made under exclusion of warranty, guarantee, return, and exchange. Claims for damages due to intentional or fraudulently concealed defects, injury to life, body, or health, and in cases of gross negligence or intentional misconduct are excepted.

Year of construction: 2022, condition: good (used), functionality: fully functional, Equipment: ✔ Plastic spray nozzles Cjdpoyvzzbjfx Ad Nsrb ✔ Level protection with probe ✔ Programmable heating ✔ 5 bar pressure pump ✔ Oscillating spray pipes ✔ Fan ✔ Lift-up door ✔ Trolley with oil drip tray Useful volume: 1170 x 600 mm Max. load: approx. 750 kg Tank volume: max. 610 litres Power consumption: 25 kW – 40 A Cleaning pressure: 5.1 bar Pump capacity: 24 m³/h Sale exclusively to businesses, commercial traders, freelancers, and public institutions. Consumer goods purchase is excluded. The device is used and sold without any liability for material defects. Warranty, guarantee, returns, and exchanges are excluded from this sale. Exceptions apply to claims based on intentional or fraudulently concealed defects, as well as claims for damages relating to injury to life, body, or health, and in cases of gross negligence or intent.

Condition: new, Year of construction: 2025, functionality: fully functional, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes Codpoyb I Azofx Ad Norb 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more effectively into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: SG10, PMH Filament strand pelletizer, Type SG10 compact machine with two drives for feeding and cutting rotor designed for one strand with max. 3.5 mm diameter The speeds of both drives are infinitely variable. This allows for a wide range of pellet lengths Cjdpfokyt T Sox Ad Nerb

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 9,000 mm, height adjustment type: electric, grinding belt speed: 25 mm/s, total height: 2,200 mm, total length: 4,640 mm, total width: 2,650 mm, overall weight: 1,200 kg, grinding length: 2,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housing in "light gray" Csdpfx Adev S Sr Rj Njrb The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table Credetwb U Aopfx Ad Njb - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 5064, Please let us know your asking price. Sale only within Europe, incl. Turkey Cedpfx Adsu Rdm Uj Norb Robot is not scope of supply - Robot not scope of supply Technical data see hand out Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please inform us accordingly in your bid For the correctness of the technical data, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 5041, Please let us know your asking price. Sale only within Europe, incl. Turkey Robot is not scope of supply - Robot not scope of supply Technical data see hand out Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please inform us accordingly in your bid For the correctness of the technical data, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. Crjdpfx Aju Izvhod Neb

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. All types of industrial waste, metal and plastic containers Cedeyw N Acspfx Ad Nerb Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc.

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. Credpfx Ajyu Nabod Njb - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts • Research / hobbyists The optical condition is good for its age.

Condition: used, Year of construction: 2006, functionality: fully functional, 2 compressed air dryers from Farrag are available for sale; further technical information available on request. Original price approx. €6,500. Credpfovkdkiex Ad Nsb Model 1: SCARD 100 Model 2: SCARD 70 Year of manufacture: 2005 Power: 3.1 kW

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU Cedjfifbbopfx Ad Nsrb immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Codpfxjfifa As Ad Nerb Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Available in following capacities: 1100 x 4/1100 x 5/1100 x 6 mm 1370 x 4/1370 x 5/1370 x 6 mm 1600 x 4/1600 x 5/1600 x 6 mm 2100 x 4 2600 x 4 mm 3100 x 4 mm Standard features: -NC controlled backgauge 750 mm with recirculating ball spindles -NC controller including cutting counter -Single cut, continuous cut and inching mode changeover -mobile foot switch with EMERGENCY STOP Angle stop on the left side with T-track -Table extension -Roller balls in the table -manual cutting gap adjustment from the front -Cutting line lighting - All-steel knife 2-edged - Sheet metal hold-down device with hard rubber strip to protect polished sheets -Light curtain on the back of the machine instead of a safety grille (CE) -Foldable front security grille (CE) -Optical function display on the front of the machine -CE conformity -2 years full guarantee -3 years on engine and gearbox Optional accessories: -Adjustable angle stop with degree scale and mm graduation Crodpfxjgu N E Do Ad Nsb -pneumatic sheet metal holder -ELGO 9521 NC controller -Sheet ejection to the front - Sheet ejection to the front including a pneumatic sheet holding system (optional sheet ejection to the front or back over the entire cutting length with NC controller FUJI touchscreen (return to sender) -Table extension with tilt stop and T-slots -Special knife for VA steels -Special color on customer request

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Csdpfx Asytr Swed Nsrb Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Year of construction: 2022, condition: like new (used), functionality: fully functional, Good day, We are pleased to offer you, without engagement, a nearly new walk-through metal detector, model SDM 600 PLUS/PZ (stock item) by CEIA. Manufacturer: CEIA GmbH, Wiesbaden, Germany Model: SDM 600 PLUS/PZ, featuring integrated, highly sensitive MI2/MSD sensors in both antenna panels Year of acquisition: 2022 Possible areas of application: Security checks at airports, cargo facilities, government and correctional institutions, government, industrial, and nuclear facilities, public large-scale events, trade fairs, congresses, checkpoints, access control in high-security areas, etc. Technical data and description: - Very high throughput with speeds of up to 15 m/s and a reset rate of 0.2 s - High discrimination rate for personal items (glasses, belt, keys, watch, coins, etc.), meeting the strict standards of airport security screening - Compliant with law enforcement standard NIJ-0601.02, specifying requirements regarding sensitivity, discrimination, and immunity for law enforcement and correctional facilities - Future-proof with upgradable options for mobile phone detection or fully automatic temperature measurement - IP66 certified control unit (ICE 60529) - Bluetooth, infrared, and RS-232 communication - Random alarm generation - Usable passage dimension 720 x 2050 mm (W x H) - Power supply 100 to 277 V, 47 to 63 Hz - Operating temperature -20°C to +65°C - Relative humidity 0 to 95% (non-condensing) - Transport package dimensions 2400 x 800 x 420 mm - Weight without pallet approx. 74 kg - For detailed technical description and application options, please refer to the manufacturer's PDF flyer. Note: This device is a nearly new stock unit. The metal detector was assembled only once for photographic purposes, then disassembled and repacked in its original packaging. It was intended for employee screening in a sensitive high-security area of a service company but was never put into use. The original installation, operating, and maintenance manuals, as well as a quick start guide and CE declaration of conformity, are included in the package. Codpfxjyq Nggo Ad Norb Please note: The above technical data was taken from the operating manual, manufacturer’s brochures, or other sources. We cannot guarantee the accuracy or completeness of this information. Scope of delivery: 1 unit metal detector CEIA, model SDM 600 PLUS/PZ We would be pleased if this machine is of interest to you. Your service team, Mertens & Frowein GmbH

Condition: new, Year of construction: 2025, functionality: fully functional, 120cm Endless UV LED Digital Scan Camera CCD Visual AI Printer Scan and print at the same time - no more stencils - any application - different images at the same time - enormous speed advantage Material width: 1200mm ENDLESS LENGTH due to conveyor belt Material height: 150mm (higher passage possible on request) Recommendation 3x Ricoh Gen5 for CMYK + white ( indicated price ) 4x Ricoh Gen5 for CMYK + white + varnish ( surcharge approx. 3500 Euro ) Including vacuum table Inclusive conveyor belt Including operator computer Including CCD Visual AI camera system Depending on the number of heads 12 - 40sqm/h or more With 2 heads approx. 12sqm per hour possible Machine dimensions: 2060mm x 2700mm x 1300mm Cjdjt E Dk Uepfx Ad Nerb Weight: approx. 500kg + pallet Machine power: 4500W

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer digital flatbed printer - replaces the common laser printers - also color prints on glass, wood, textiles, plastic, metal and many other materials New model: UV4060 Print head: Epson TX800 2690 dpi max. Cjdpfod Ewziox Ad Norb Including software for printer and image processing Dimensions: 800*858*566mm weight: 70kg 360 degree use possible on request: for bottles and round objects A3 size 31x55cm and 23cm height possible 5x500ml paint can be supplied (extra charge) Software setting and printer explanation gladly if required. Germany/Europe-wide. (Surcharge) Print videos etc. can be sent by Mail/WhatsApp.