Used S+S Rp 3000 for sale (71,041)

Year of construction: 1999, condition: excellent (used), functionality: fully functional, SFK-DANFOTECH MA 3000 SD ID.NO. 2683 SFK-Danfotech mod MA 3000 SD vacuum tumbler / massage tumbler year mod 1999 capacity 3000 liters. Gbsdpfx Aasrzq Dzjgjn Dimensions 330 x 250 cm Height 250 cm.

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Ref Raun Gsdpfxeu Ixkpj Aagobn

Year of construction: 1997, condition: excellent (used), PBR T35SNC x 3000 cycle turning machine Year of manufacture: 1997 Control: Fagor Center distance: 3000 mm Max. turning diameter: 630 mm Center height over bed: 300 mm Gbodoil Hzzspfx Aagon center height over slide: 165 mm spindle bore: 105 mm Rotational speed: 2000 rpm weight: 6200 kg Accessories incl: Multifix set (without steels), chuck (See photos) + additional chuck. No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping Gjdjnfvx Nepfx Aagsbn - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 2024, condition: new, Parameter: JSW-3000 Laser power: 3000W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: Nitrogen / Argon / Oxygen Power supply: 3-phase 380V 50/60 HZ Gbsdpfx Ajtwz Nmeagen Maximum total energy consumption: 24.6KVA/37.4A Average energy consumption: 14.7KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 195kg Machine dimensions: Height: 1050mm, Width: 530mm, Length: 1240mm. Material processing capabilities for JSW 3000W welding function. Material: Stainless steel 0.5 - 8mm Carbon steel 0.5 - 8mm Galvanized sheet metal 0.5 - 8mm Aluminum 0.5 - 6mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - Safety glasses OD6+ - Welding mask OD8+ - Warranty 24 months

Condition: excellent (used), functionality: fully functional, Machine is in a very good condition, works with no problem at all! Gsdpfoim Si Rsx Aagobn Feel free to come and inspect machine under power upon appointment!

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine can fill still drinks, water, juices, wine and carbonated drinks The machine is isobaric Gbedpfxjvtgaxj Aagen

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), fuel type: diesel, fuel: diesel, Equipment: additional headlights, airbag, differential lock, electric window regulation, trailer coupling, TLF 3000 All-Wheel Drive on Off-Road MAN TGM 13.320 All-Wheel Chassis Now with increased engine power! Ideally suited for small and medium-sized fire brigades in rural areas that require a compact and robust vehicle capable of handling a wide range of tasks while also needing a large water supply. Chassis: MAN TGM 13.320 4x4 EURO 6 with 320 HP (235 kW), automated transmission Single tires with same track width for superior off-road capability Cab: Standard crew cab (1:5) in RAL 3000 (fire red) Air conditioning and auxiliary heater Standard 4 SCBA mounts in the crew compartment Body: High-quality frame construction using rust and corrosion-free materials Folding steps at each side equipment compartment Individually customized stainless steel equipment storage Walkable, non-slip vehicle roof Pump/Extinguishing Media Tank: Maintenance-free combined normal/high pressure pump FPN 2000-10 PUMP&ROLL capable Output: 2,000 l/min at 10 bar and 400 l/min at 40 bar Integrated, stepless foam proportioning system 4,000 l water tank with integrated 400 l foam agent tank Additional heating in pump compartment Firefighting Features: High-pressure rapid attack system with 50 m rigid hose Foam/water monitor (2,000 l/min) on the roof Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting: LED lightbar on the roof / 2 LED front flashers Pneumatic Martin-horn special signaling system 100 W loudspeaker system with PA unit Rear-view camera Comprehensive LED lighting in crew and all equipment compartments LED area lighting and auxiliary white lights on the body Pneumatic LED light mast with remote control Optional hygiene board We would be pleased to provide you with a detailed offer and comprehensive demonstration of the vehicle at our Berlin location. All information provided to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but serves as information only. Subject to prior sale! Gbjdpfoy Hqlkex Aagen

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 0304/5599, functionality: fully functional, controller manufacturer: Delem, controller model: DA-65, working width: 3,000 mm, bending force (max.): 105 t, control type: CNC control, degree of automation: automatic, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, european tool clamping system, Crowning: Reflex - ACSG1 Priključna moč: 11 kW Tools: Possible with agreement. Gbsdjxv Eafepfx Aagjn NEW UPPER TOOL HOLDERS. Last service: 05/2025.

Condition: ready for operation (used), Suitable for twist-off caps Suitable for screw caps Capacity: up to 30,000 caps per hour Gjdpey A Tk Iefx Aagobn Magnetic elevator belt

Condition: like new (used), Year of construction: 2005, Retrofitted: 2026 Numerical control: TNC-i530 Godpfx Aey Az H Djagebn Technical features Dimensions Table dimensions: 2500 x 2000 mmTable construction: Continuous rotation with a hydraulic breakNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mmY axis traverse: 1500 mmZ axis traverse: 1300 mmVertical capacity (VC): -5 / 1295 Milling head Auto-indexing Orthogonal 90º - Bodies B C (1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 5000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 20000 mm/min Weight and dimensions Machine weight approximate: 39000 kgMaximum weight on table: 13000 kgMachine dimensions approximate: 7980 x 8000 x 3750 mm Accessories Guarding: Peripheral without roofAutomatic tool changer: ATC-60Chip conveyor: 1 rear longitudinalElectronic handwheel: HR-410Coolant: External internal high-pressure coolant through spindleCoolant filter: Paper strip filter Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, Packaging line with Transnova-RUF Pick-&-Place, Garvens, Safeline, Mengozzi For sale is a complete packaging and inspection line from industrial use. Main components: - Pick-&-Place packer: Transnova-RUF including infeed and carton handling Gbodpfjy Exbdsx Aagsn - Checkweigher: Garvens - Metal detector: Safeline (Mettler Toledo) - Infeed / singulation system: Mengozzi - Pusher / rejection unit - Conveyor technology and line connections Description: The system was used for automated: - Product infeed and singulation - Weight inspection - Metal detection - Rejection of faulty products - Pick-&-Place packaging into cartons / trays Suitable for applications in the food or FMCG industry. Condition: - Used complete line - System out of operation - Functionality not tested - Completeness not guaranteed - Sale as-is / as inspected Terms of sale: - Preferably sold as a complete unit - EXW (ex works), self-collection - Company sale – without warranty, guarantee or return

Year of construction: 2009, condition: excellent (used), I sell the widebelt sanding machine RWT BS950RP, year 2009. Configuration: Hard rubber cylinder Combi unit soft rubber cylinder + pneumatic jumping pad. Working width 950mm Elektronic working height adjustment with digital readout 3-160mm Gbedsiuc Sgepfx Aagen 1 Motor 11kW 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: used, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: gas, color: blue, axle configuration: 4x4, fuel: liquid petroleum gas (LPG), gearing type: hydrostat, Year of construction: 2005, operating hours: 3,102 h, Equipment: all wheel drive, Iceresurfacer: + Dupon + OKAY 3000 + 4-cylinder VW gas engine, 75 HP + All-wheel drive + Hydrostatic drive Gbodpfsy Enw Usx Aagsn + Snow tank + Water tank + Side broom + Rink board limiter + Augers / blades + Year of manufacture: 2005 + 3,102 operating hours Municipal vehicle from first owner. Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typing mistakes possible, subject to prior sale!

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz Gbedpfohv A A Dsx Aagsn - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mm Turning length : 956 mm Main Spindle: Chuck:SAMCHULLY HS-12 (12 inch) Spindle Speed (Max.):3,000 RPM Gbjdpfx Asy Ea Hnoagsn Spindle Nose:A2-8 Motor Power (Cont./Max):18.5 kW / 26 kW Max. Turning Ø x Turning Length:405 mm x 956 mm Tool Carrier (X/Z): Number of Tool Stations:12x BMT65 Max. Milling Ø:433 mm Travel (X/Z):245 mm / 1,040 mm Rapid Traverse (X/Z):24 m/min / 30 m/min Tailstock: Quill Ø:110 mm Quill Stroke:100 mm Equipment/Accessories: Additional Equipment:Tool touch probe (Tool Setter, swiveling) Collision Protection:Turret with Hirth coupling Year of Manufacture:2023 Weight:5,600 kg (according to configuration nameplate) Chip Management:Chip conveyor Electrical Connection:380 V / / 50/60 Hz / 42 kVA : :

Year of construction: 2026, condition: new, functionality: fully functional, Robotic Grinding and Polishing Cell – CNC Control SINUMERIK ONE We offer a modern robotic cell designed for precise and efficient grinding and polishing operations using CNC control. An ideal solution for production automation and achieving consistent, high-quality surface finishes. Key features: Industrial robot with a 3000 mm reach Fully enclosed safety cell Control system Siemens SINUMERIK ONE HT2 operator panel 22" touchscreen interface for intuitive operation Programming and control: Programming via NC code (standard CNC) Shopfloor programming: ShopTurn ShopMill Capability to program using standard CAD/CAM systems Intuitive program creation directly on the machine – no CAM required Processing technology: High-performance grinding spindle PushCorp (power selectable based on application requirements) Optional extensions: Integration of a rotary table (positioner) إمكانية إضافة linear axis to extend the working envelope Option to integrate a machining spindle with automatic tool changer (ATC) Fully customizable based on customer-specific applications Benefits: High repeatability and consistent surface quality Combination of robotics and CNC control in one system Flexibility for grinding, polishing, and subsequent machining in a single setup Wide range of programming options (NC, shopfloor, CAD/CAM) Gbedpjy D Nwtefx Aagjn Easy operation thanks to shopfloor programming Ready for Industry 4.0 integration

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 6 mm rear stop 1000 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9-17 Hub/min total power requirement 7,5 kW Gsdpfeyrhvvsx Aagobn dimensions of the machine ca. 3800 x 2000 x 1600 mm weight 4500 kg Equipment: - electric backgauge - electric cutting angle adjustment - manual cutting gap adjustment - SP 9 control unit - Safety guard behind the machine incl. light barrier - front finger guard - 1x side stop - operating instructions

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6 mm rear stop 10 - 750 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9 / 14 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3750 x 1600 x 2450 mm weight 4800 kg Features: - Electro-hydraulic, slide-guided sheet metal guillotine shears - Front control panel, front left - With electro-hydraulic cutting angle adjustment - With manual cutting gap adjustment, from the front (eccentric) - Electric motor rear stop 10-750 mm (ball screws) - With analog position display + hand wheel for fine adjustment - 1x side stop - 3x support arms - 1x freely movable foot switch - Front finger guard - Operating instructions (PDF) Gbjdpjw S Nknsfx Aagon

Condition: new, Year of construction: 2026, The PS12E-3000 format saw is a professional carpentry tool that stands out for its powerful specification and its ability to perform large-scale precision cuts. This advanced circular saw has been developed for a variety of woodworking tasks and is the ideal tool for demanding users. The main features of the saw, the PS12E-3000 wood panel saw: Two cutting discs: The saw is equipped with two cutting discs - a main disc and an undercutting disc - which provides ample cutting capacity for different types of wood materials. Large format table: One of the main advantages of this model is the extra-wide, bearing-mounted format table with support, which allows precise processing of large-format chipboard up to almost 3,000mm long and other large-sized wood materials. Additional undercutter: The additional undercutting blade makes the saw ideal for cutting furniture board and particleboard, eliminating the risk of splintering and ensuring an even cut. Disc inclination: The cutting disc can be tilted from 90° to 45° Maximum bar length: This saw is fitted with a bar of an impressive length of 2,300 mm Disc replacement: The replacement process is quick and efficient, thanks to the ability to remove the metal top and unscrew the blade. Saw blade guard: The saw has an effective saw blade guard, which can also be connected to the extraction system to help keep the work area clean. Powerful motor: The saw blades are driven by a powerful 3.8 kW, 400V motor, which guarantees smooth operation and efficient cuts. Control panel: The machine's control panel is located on the underside of the saw and includes an emergency stop, a knob for angle cuts (45°) and a knob for blade height adjustment with a locking mechanism. Additional measuring instruments: All guides are equipped with length and cutting angle scales, allowing the required angle and length to be quickly set without the need for additional measurements. Extraction compatibility: The saw is suitable for connection to a sawdust and chip extraction system with a suction nozzle diameter of 100 mm, which contributes to keeping the workplace clean. Application of the saw, format saw for wood: The PS12E-3000 format saw is an advanced tool that combines durability, precision and performance, making it the ideal choice for professional woodworkers and everyday woodworkers. Its versatile capabilities and advanced features allow it to handle a wide variety of woodworking projects and tasks in both industrial and craft settings. Gsdpjvugc Ajfx Aagsbn DIMENSIONS OF THE MOVING TABLE 3000 x 270 mm MAIN TABLE DIMENSIONS 800 x 385 mm SIDE AUXILIARY TABLE DIMENSIONS 880 x 800 mm BAND WIDTH 1220 mm SAW TILT 0-45° CUTTING HEIGHT AT 90° 100 mm CUTTING HEIGHT AT 45° 80 mm MAXIMUM SAW SIZE 315 mm MAXIMUM Blade size 100 mm MAIN SAW RPM 4000 rpm CUTTING SAW RPM 5800 rpm POWER OF ENGINE S6 5,3 kW / 7,1 hp POWER OF ENGINE S1 3,8 kW / 5,1 hp 400 V POWER SUPPLY WEIGHT 309 kg

Condition: used, mileage: 852,923 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.440 6x4 | Crane with new UVV inspection | Well maintained & ready for operation | Few crane hours This MAN TGS 26.440 is in excellent technical and visual condition. The crane comes with a new UVV safety inspection, the rear axle tires are new, and the vehicle has been fully serviced. Clean appearance, runs flawlessly – immediately ready for use. Highlights: * HMF 3000-K5 loading crane * New TÜV inspection * 440 HP, 6x4 drive * Crane unit with current UVV inspection * New rear axle tires * Technically overhauled * Very well-maintained interior and exterior * Long-distance driver’s cab with 2 sleeper bunks * Air-suspended driver’s seat * Multifunction steering wheel * Air-suspended driver’s seat * Auxiliary heating/air conditioning * Extendable refrigerator compartment * Radio * Navigation system * Stationary air conditioning Gbjdpfx Aasxxfl Tegen * Electrically operated mirrors and windows * Air horns * HMF 3000-K5 loading crane * Radio remote control For further information, please feel free to contact us.

Condition: used, mileage: 852,923 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.440 6x4 | Crane with new safety inspection (UVV) | Top condition & ready for immediate use | Low crane hours This MAN TGS 26.440 is in excellent technical and visual condition. The crane has a new UVV inspection, the rear axle tires are new, and the vehicle has been fully serviced. Clean appearance, runs flawlessly – ready for immediate use. Highlights: - HMF 3000-K5 loading crane - New TÜV inspection - 440 HP, 6x4 drive - Crane system with current UVV inspection - New rear axle tires - Technically overhauled - Very well-maintained interior and exterior - Long-haul driver’s cab with 2 bunks - Air-suspended driver’s seat - Multifunction steering wheel - Air-suspended driver’s seat - Auxiliary heating/air conditioning - Extendable refrigerator compartment - Radio - Navigation system - Stationary air conditioning unit - Electrically operated mirrors and windows - Air horns - HMF 3000-K5 loading crane - Radio remote control Gbodsxul Eropfx Aagon For further information, please feel free to contact us.

Condition: used, CENTER HEIGHT 800 MM DISTANZA OF THE CENTERS 3000 MM MAX DIAMETER TURNABLE ON BED 1570 MM MAX TURNABLE ON THE CARRIAGE 1120 MM BED WIDTH 700 MM WEIGTH ADMIT BETWEEN CENTERS 6000 KG SPINDLE SPEED 8 - 350 mm SPINDLE BORE 102 MM Gbedpfx Aasrzt Hajgon TAILSTOCK : DIAMETER QUILL 135 MM STROKE 300 MM NOSE ATTACHMENT 80 METRIC MOTOR POWER 25 HP PLATFORM 1200 MM DRO HEIDENHAIN 2 AXIS SQUARE TOOL TURRET RAPID FEED PROTECTIONS ON THE SPINDLE AND GUIDES

Condition: good (used), Hydraulic power unit for Esterer LSH saw frame year 2006 Type: RP 63 WÜ Gedpog R Sm Djfx Aagsbn feed for LSH also available fully functional - good condition - immediately available Location: Austria, near Ried im Innkreis Visit also my other advertisements. I am looking forward to your inquiry.

Condition: good (used), Year of construction: 1999, The maximum working area is 3000 x 1600mm Gedpfxog Np Ras Aagobn Minimum working area 390 x 420mm 2.2kW engine Weight 1500 kg