Used Saf Plasma Cutting Device for sale (25,500)

Condition: used, Year of construction: 2017, functionality: fully functional, controller manufacturer: ECS, controller model: SERIE 900, control type: NC control, TABLE DIMENSIONS: 2500 mm x 1250 mm C.N. E.C.S. series 900 Lsdpfxexc Ibre Akyshh GENERATOR: CEBORA PLASMA PROF166

Condition: new, Year of construction: 2024, PLASMA BURNER MODEL MTX 1500/3000 Construction: steel+aluminum Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear rails class accuracy 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Collision system to protect the torch from damage Linear guides: TBI Automatic material detection system Power supply: 240V Permissible load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table -replaceable grate -control software in German, English, Polish -Declaration of Conformity CE - DTR Lhsdpfxerb Dyzs Akyoh It is possible to select the appropriate Hypertherm cutter to meet individual customer needs.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2426 09 1364, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Lhedexywupjpfx Akyjh Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, workpiece weight (max.): 900 kg, table length: 3,000 mm, table width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The head has been replaced and the machine has been serviced! Ledoxcwakopfx Akyehh TECHNICAL DETAILS Table size: 3,000 x 1,500 mm Maximum sheet thickness (steel): 25 mm Maximum sheet thickness (stainless steel): 20 mm Maximum sheet thickness (aluminium): 20 mm Maximum workpiece weight: 900 kg Plasma source: Hypertherm 125 MACHINE DETAILS Total weight: 1,100 kg EQUIPMENT Documentation/Manual

Condition: good (used), Year of construction: 2012, Worktable: 3,000 x 1,500 mm Table height: 700 mm Load capacity: Max. 600 N/m² Lodpfx Akexugqvjyehh Material thickness: 0.5 – 6 mm Speed: Max. 36 m/min Control unit: Flat display, keyboard and mouse Power supply: 3x 400V, 50Hz + 1x 220V, 50Hz (approx. 10 kW) Pneumatics: 6.0 – 8.5 bar (approx. 300 l/min) Dimensions: 4,100 x 2,200 x 1,700 mm Weight: 1,400 kg The extraction unit is not included in the price. However, upon request, we can provide a suitable extraction system for the machine.

Condition: new, Year of construction: 2026, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Ledpsh I Nw Djfx Akyjhh Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; ▪ 3D control on seven axes allows for a higher level of CNC programming; ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: good (used), functionality: fully functional, Baykal BPS_Hypertherm HPR260 Baykal BPS is the model that provides top level sensitivity amongst all series. It is designed for high sensitivity plasma cutting. Lhodpfxoruq Azo Akyjh Plasma cutting system Baykal: Benefits: - High mechanical accuracy to: ± O.1 mm - Axis positioning speed: 30 m/min - X and Yaxis travel on precision linear rail guides. Technical data: - Independent CNC console - Tube(pipe) cutting place - Bevel cutting head - Hypertherm HPR260 - Independently Constructed Table Plot dimensions: 2000mm x 9000mm (without the pipe cutting place) 2900mm x 9000mm (with the pipe cutting place) PLASMA SOURCE: Hypertherm HPR260 Specification: - Maximum cutting tickness: up to 65mm - Bevel cutting: up to 45 degrees - Output voltage: 175 VDC - Output current: 260 A - Maximum OCV: 311 VDC - Dimensions: 115 cm (45.1") H, 82 cm (32.1") W, 119 cm (46.7") L

Condition: used, Multi-beam safety light curtain, 1 transmitter + 1 receiver + 2 reflectors FIESSLER 1 transmitter unit Type: ULVT / 105 S No.: 69833 Protective field height: 1500 mm Range: 24 meters Response time: 13 mS Detection capability: 30 mm Supply voltage: 24 Volt DC 1 receiver unit No.: 69832 Type: ULVT / 105 E Protective field height: 1500 mm Range: 15 to 30 meters Response time: 13 mS Detection capability: 30 mm Supply voltage: 24 Volt DC Installation cross-section: 41 x 61 mm Overall length: 1600 mm - mounted on a support column made of 80 x 80 mm aluminum system profile with a base plate Lhjdozcf U Rjpfx Akyjh - Height of support column: 2020 mm 2 mirror reflectors, type SASU 1500 column (impact protection) with mirror Protective field height: 1500 mm Installation cross-section: 90 x 87 mm Overall length: 1850 mm Total height with pallet: 2180 mm Total weight with pallet: 116 kg Very good condition Ideal for presses, eccentric presses, hydraulic presses, plate shears, bending presses, or robots as a protective fence around machines such as nibbling machines or automated systems.

Condition: excellent (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Included in the scope of supply: 1x Push-through safety device, used Material color: hot-dip galvanized Overall length: approx. 2,700 mm U-profile: 50 x 50 mm Agraffen dimensions: 335 x 50 mm (H x W) 4x Hex bolt: M10 x 35 mm 4x Lock nut: M10 8x Washers: M10 Additional information: System: SSI Schäfer For type designation: PR350/400 Designed for double rows of shelving Suitable for clear width: approx. 2,700 mm General information about the item: This item is offered for collection only. Any further transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Lodjh T Uwvspfx Akyshh Delivery with our own fleet (without unloading)

Year of construction: 1989, condition: good (used), Operating hours: 17 Machine number: 160973 Power: 4,500 W Voltage: 220 V No-load voltage: 320 V Lhjdpfsbfa Hwox Akyeh Current: 16 A Insulation class: F Cooling type: F

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. Lhedpfexqxw Tox Akyeh #8312-2

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. Ledpfx Akexqxt Ioyohh The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Year of construction: 2010, condition: ready for operation (used), A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement. Lhsdpfx Aey Tauhjkysh

Year of construction: 2007, condition: excellent (used), Approx. 11,000 push-through guards for SSI Schäfer R 3000, for a field width of 1.28 m – used: Price per unit: €2.00 (net)! Minimum order quantity: 200 units! Manufacturer: SSI Schäfer Type: R3000 Ljdpfx Akjg Rmf Eoyshh Year of manufacture: 2007 For field widths of 1.28 m Condition: good Available: immediately Location: Frankenberg warehouse

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW Lhjdsgu Nmhspfx Akyeh - weight: 800KG Made in Germany The pictures show you an older machine

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display Lhsdog Dvdcopfx Akyeh - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW Lsdjx Ebzqspfx Akyehh - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25400 € 485.14 € 1250x2500 mm Lhjdpfxswiryuj Akysh HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25 mm price € 26.900,- € 28.400,- € 29.900,- € 32.800,- OPTIONS: water tank to quickly fill and drain thetrough € 2.870,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 23200 € 445.44 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm Lhjdpewiq Scefx Akyjh 22 mm 25mm price € 24.600,- € 26.100,- € 27.600,- € 30.600,- Options: water tank to quickly fill and drain thetrough € 2.360,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: used, Year of construction: 2011, total width: 2,400 mm, total length: 4,500 mm, total height: 2,200 mm, Empty weight: 3.000 kg Price: On request Including various accessories, replacement parts and spare parts - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 289.112 - Drive system: CNC - Control system brand: Beckhoff - Power [kW]: 16.8 - Resonator brand: Hypertherm - Resonator type: Powermax 105 - X-axis travel [mm]: 3000 - Y-axis travel [mm]: 1500 - Max. material thickness [mm]: 32 - Control type: Beckhoff - Transport dimensions: 4500mm x 2400mm x 2200mm (l x w x h) Lhedpoxrz Hmjfx Akyjh - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2008, total width: 2,400 mm, total length: 8,000 mm, total height: 2,500 mm, Empty weight: 8.000 kg Price: On request Track: 8000x4500mm Travel: 6000x2500mm Sheet-thickness: 2-40mm plasma, 150mm autogeen Off-line software: Libellula Many belongings and consumables. Without exhaust-system Lhjdpeydivuefx Akyjh - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Drive system: CNC - Resonator brand: Precision - Resonator type: Plasmarc 401 - X-axis travel [mm]: 6000 - Y-axis travel [mm]: 2500 - Table length [mm]: 6000 - Table width [mm]: 2500 - Max. material thickness [mm]: 40 - Options: Oxy-fuel cutting, Offline software - Control type: Vision 52 - Transport dimensions: 8000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2024, neu 2024 2517 prompt, Zwischenverkauf v Deutschland 36720 € 701.35 € 1 1500x3000 mm Hypertherm Powermax 125 25 mm 25 mm 57 mm 25 mm 125 A 24 m/min 1/10 mm 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 CNC-workbench software (external PC not included) Height adjustment by arc voltage Set-up laser precision profile rail guide(HiWin) Lhodpfxowva Ias Akyeh zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTION: Suction bridge (prepared for suction diam. 160 mm)

Condition: good (used), Year of construction: 1997, machine/vehicle number: 71-000988, Offer 24820 Technical data: Lhedovqbdyspfx Akysh - Cutting current continuously adjustable 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - Max. cutting thickness - Steel approx. 32 mm - Aluminum approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing system - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

Condition: used, length . mm Ledpfxsyquw Dj Akyehh height . mm volt U2 100 V ampere I2 40-120 A volt U1 380 V volt U0 280 V ampere I1 37-48 A Manufacturer number.17763 See type plate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2008, Zinser 2325-N Working area: 3100 x 6050 mm 1x straight oxy-fuel torch No filter unit included. Lhsdpfxswwtzpo Akysh Control upgraded in 2021. More information in the attached documents.