Used Scheer Pa 4137 for sale (5,185)

Condition: used, empty load weight: 3,555 kg, maximum load weight: 6,435 kg, overall weight: 9,990 kg, axle configuration: 2 axles, first registration: 03/1999, loading space length: 7,300 mm, loading space width: 2,450 mm, loading space height: 2,600 mm, total length: 2,550 mm, total width: 3,610 mm, suspension: air, tire size: 235 / 75 R 17,5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, tandem, air-suspended, lifting+lowering, Edscha, curtain, portal doors, lashing eyes, rear support ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Bdodpoi Rnyrefx Ad Aeb

Condition: used, empty load weight: 4,400 kg, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2006, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 48 m³, total length: 2,550 mm, total width: 4,000 mm, suspension: air, tire size: 385 / 65 R 22,5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2-axle, MB axles (disc brakes), air suspension, ABS (anti-lock braking system), curtain, portal doors, lashing eyes, lifting + lowering 2 x perforated rails for load securing, with drop sides, disc brakes ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bjdpfx Aevhg Ufed Aodb - .

Condition: used, empty load weight: 5,280 kg, maximum load weight: 12,720 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2007, loading space length: 7,350 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, total length: 2,550 mm, total width: 3,580 mm, suspension: air, tire size: 385 / 65 R 22,5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, tail-lift, Vehicle location: Bovenden, 2-axles, tandem, air-suspended, 1st axle liftable, ABS (anti-lock braking system), Edscha, curtain, low-coupled, aluminum tail lift, standing Construction: K+G tec construction with LBW Bär 2000 kg, BC2000S4 MB-axle DISC BRAKE, load securing in the floor plus partition frame, LBW Bär 2,000 kg lifting capacity, 2,300mm high, drawbar can be changed to a high design for €2,000 net. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Bedpji Rqr Ejfx Ad Ajdb - .

Condition: used, VARIOfit Pallet Collar for Euro Pallets – Stackable Rack, used 🧰 Product Features • Manufacturer: VARIOfit • Item number: pa-080.007 • Material: Steel Bdodpfsx Ezi Rsx Ad Aeb • Condition: used • Colour: blue • External dimensions: 1260 x 860 mm • Internal dimensions: 1125 x 800 mm • Frame height: 1200 mm • External height: 1410 mm incl. pallet • Load capacity: 750 kg • Weight: approx. 25 kg • Stackable: yes, stackable 3 times • Collapsible: yes • Pallet: not included 💰 Price: €89 net plus VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear metres of pallet racking from various manufacturers in stock (Subject to changes and errors in technical data, specifications, and prices as well as prior sale! Please see our terms and conditions; all prices excl. VAT ex warehouse.)

Year of construction: 2025, condition: new, Additional installed holding section. After reaching the adjusted pasteurizing temperature of Bodjgig Igspfx Ad Ajdb 90°C, to hold the juice on this temperature for 3 seconds, before it goes into the heated buffer tank of the filler.

Year of construction: 2009, operating hours: 550 h, condition: used, Preinstalled mobil complete system inclusive impeller juice pump, high efficient boiler, heatexchanger and automatic temperature control. Components: Model on 2 fixed roller for heavy loads and 2 steering roller 41kW WOLF gas boiler Hot water circulation pump Expansion vessel Automatic temperature control plate heat exchanger Bdsdpfxoclttpo Ad Aeb Liquefied gas version incl. gas bottle holder and gas pressure regulator Capacity 500l juice per hour Dimensions (LxWxH): 1450x980x1700mm Weight: approx. 468kg

Condition: new, Year of construction: 2025, Kreuzmayr PA 500 pasteurizer for fruit juices, with pipe in pipe heat exchangers, including oil-fired boiler, temperature control, Bdedpfx Aob Ilnyjd Ajb juice pump, mounted on stainless-steel chassis throughput: 500 l/h from 10°C to 80°C

Condition: used, Year of construction: 1979, max. wheel diameter 350 mm gear width 350 mm Bdedet Hwxzjpfx Ad Asb max. module 8 min. module total power requirement 7,5 - 22 kW weight of the machine ca. t dimensions of the machine ca. m Gear hobber with gear shaping device, 2-cut cycle

Condition: used, functionality: unexamined, Ferwood Code: RU0011650 - Manufacturer Code: K6343K0930 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, contact us. Bedewtnpmjpfx Ad Aedb

Condition: like new (used), Michilin MCL-PA 20 vice for toolmakers with magnet Condition as new, unused Jaw width: 48 mm Bjdpfxsurlu Uo Ad Asdb Jaw height: 25 mm Opening width: 75 mm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: Bdodpfx Asud H Dmjd Ajb KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit Bodpfx Asuggb Dod Asdb  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: good (used), Year of construction: 1964, Profile bending machine. Produced by Girggio - ITALY - 1964. Type. PA-14. Bdsdpfx Adolbilrs Aeb 8kW main engine. Roller screw drive motor 5.5 kW. Dimensions L x W x H 2200 x 1300 x 1400 Weight approx. 3000kg.

Condition: refurbished (used), Year of construction: 2001, Working width 40-170 mm Thickness 9-50 mm Bdjdpfxsqa Dq Ie Ad Asb 6 operator motors of 7.5 KW each

Year of construction: 2007, condition: good (used), MB Conveyors Italy PA ALL (2007) • Length: 357 cm • Width: 60 cm Bsdpju Acqpofx Ad Aodb • Height: 215 cm

Year of construction: 2012, operating hours: 25,897 h, condition: refurbished (used), Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897 Max working width: 120 mm Max. roll width 80 mm Electric connection: 230 V, 50 Hz, 500 W Own weight: 50 kg Total dimension L 1000 mm x W 800 mm x H 1900 mm Description Including mobile frame, documentation available Working speed 30m per minute Saves in the software the models of over 100 labels It has both configurations on the left LH and on the right Rh, at the customer's option Luminous LCD display (the display changes colour depending on normal mode, warnings, and faults). The control panel is 90 ° rotatable Label counting system Check the labels and any label slips on the roll The label glueing system can be set as fixed or as variable with Tacho The controls are fully integrated into the machine For the Romanian companies, there is the possibility of selling in instalments. Bedpfx Adog H Tmbo Asdb Price Euro 2.900 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 185, turning diameter over cross slide: 800 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning diameter over bed slide: 1,000 mm, turning length: 2,000 mm, faceplate diameter: 900 mm, Potisje lathe PA - 50 - DC. Bjdpsww Igmefx Ad Asdb Excellent condition. Steady and following rests included, along with face plate. Cone attachment on the lathe.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 10,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Traverse path X-axis: 800 mm Traverse path Y-axis: 520 mm Traverse path Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Tool changer: 24-position Bjdpoy E Hqtefx Ad Ajdb Table size: 950 x 520 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Weight: 6,800 kg Operating Hours Machine on-time: approx. 47,000 h Program run time: approx. 5,700 h Spindle: approx. 4,800 h EQUIPMENT IKZ (internal coolant supply) Hexagon probe Note: NC clamps and tool holders are not included in the offer.

Year of construction: 2023, condition: new, SEMIX Compact type concrete batching plants are designed for limited spaces and transportation easiness for overseas countries. SEMIX Compact 30 can fit on a single container and assembled in 3 days completely. SEMIX Compact 30 is equipped with 750/500 liters capacity Concrete mixers which can be a single shaft or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. The robust steel structure maintains long-life performance. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer mechanism. SEMIX Compact Concrete Batching Plants offers variety in aggregate transfer mechanism. Even in compact batching plants, users can choose either skip hoist mechanism or transfer conveyor for aggregate transfer. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service. Bodpfsgazk Esx Ad Asdb

Year of construction: 2023, condition: new, SEMIX Compact type concrete batching plants are designed for limited spaces and transportation easiness for overseas countries. Bsdpfx Adegazqko Ajdb SEMIX Compact 30 can fit on a single container and assembled in 3 days completely. SEMIX Compact 30 is equipped with 750/500 liters capacity Concrete mixers which can be a single shaft or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. The robust steel structure maintains long-life performance. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer mechanism. SEMIX Compact Concrete Batching Plants offers variety in aggregate transfer mechanism. Even in compact batching plants, users can choose either skip hoist mechanism or transfer conveyor for aggregate transfer. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Condition: used, machine/vehicle number: 008108, Max width workable: 1050 mm Max length workable: 2400 mm Bdodew Idduopfx Ad Aeb Max height workable: 250 mm

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivels up to: 45 Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg Bdodpoc Snvfsfx Ad Asb

Condition: good (used), Year of construction: 2014, Durr Ecoclean Universal 81W Aqueous Parts Washer Year: 2014 SN: CK-4900100153 Basket size approx.: 670 x 480 x 300 mm Max batch weight: 150 kg Total fluid capacity: 1300 ltr Bdsdpfjrzufkjx Ad Aeb Weight unfilled: 3500 kg Dimensions: 3200 L x 1800 W x 2300 H mm

Condition: used, Year of construction: 2017, functionality: unexamined, Used HEGLA Glass Packlifter & Sheet lifter with frame – Sold as Seen Offered for sale is a used HEGLA glass transport and handling system, comprising steel support frames, vertical transport racks, safety guarding, and an integrated access platform with stairway. Manufactured by HEGLA Maschinenbau GmbH & Co. KG (Germany), this robust industrial system is designed for the safe unloading of packs, and handling of large glass sheets within a production environment. Key details  Manufacturer: HEGLA Maschinenbau GmbH & Co. KG Type: Transporteinrichtung (Transport System) Year of manufacture: 2017 Load capacity: 3,000 kg Max load height: 2,550 mm Approx. machine weight: 940 kg CE marked Construction & features: Heavy-duty steel frame construction Multiple vertical glass support racks with rubber contact pads Integrated safety fencing and guarding Access platform with industrial steel staircase and handrails Overhead beam structure suitable for handling integration Floor-mounted and free-standing sections Bedpsx Tpg Hsfx Ad Aodb Condition: Used, with visible cosmetic wear including paint chips and surface marks consistent with normal industrial use Structurally complete and previously operational at time of decommissioning No testing carried out since removal Sale terms: Sold as seen No warranty given or implied Buyer responsible for inspection, loading, and transport Power, controls, and ancillary equipment only included where visible in photos

Year of construction: 2005, condition: good (used), functionality: fully functional, 1 x LM Group s.p.a. Pathfinder Channeliser reject system. Ideal for conveying, channelising and line-dividing applications in the food and pharmaceutical industries. Serial number - 04030205. Bdjdpjy Hkdyefx Ad Asb Date of manufacture - 2005.