Used Scheppach Precisa 6.0 for sale (493)

Condition: used, mileage: 384,500 km, power: 390 kW (530.25 HP), first registration: 09/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 09/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FT XG 530 Central locking Headlight beam for right-hand traffic LED headlights Longitudinal members 260/6.0 mm, without inner reinforcement Maximum ambient temperature 38 degrees Antennas: DAB-radio prep, 2x mobile, GNSS Steering with Euro certificate Single-circuit steering Automatic climate control and air conditioning Mechanical cab suspension Standard component arrangement Main mirror Pneumatic control for parking brake Nameplate: Standard (EU) Handle and surround: black, side panel: cab color Shunting mode Front mirror XG cab Passenger seat: cinema style, fabric cover Armrests on both sides of driver's seat Rear axle load capacity 13.00 t LED skylights Left-hand drive Tempered glass Dashboard design: plateau Front leaf suspension: standard Headlights without height adjustment Interior trim color: exclusive Driver’s seat, fixed base Additional cab insulation Passenger seat, fixed base Parking heater with heat pump and timer Cab interior trim: hexagon Steering wheel with silver accents Front: 8.00 t, parabolic, 163N 2-cylinder compressor without clutch LED interior lighting Dashboard table Foam mattress for lower bunk Automated manual gearbox - full version Front chassis floor: floor plate Basic immobilizer Exhaust pipe center Windshield Kingpin diameter 2 inches Taillights with bulbs Stabilink rear axle suspension Driven rear axle(s): 315/70 R22.5 Emission class Euro 6 Black seat belts Front air intake Max. gross train weight drive st. 50,000 kg cat. 3 Chassis color anthracite grey Anti-slip regulation (ASR) Mirror housing black Headlight trim color: crystal white CRYSTAL WHITE Fixed cab entry Bumper color: crystal white Driven rear axle with disc brakes One ride height, standard height Middle storage compartment KA saddle offset 620 mm Rear mudguards Splash protection FMS interface, prepared Front underrun protection Pneumatic connection for trailer, swivel coupling Catwalk with step, standard Exhaust pipe horizontal, low Body socket on chassis Steel disc wheels, silver-grey Catwalk step left LED work lights Normal transport, full version Automated gearbox, TraXon, 12 speeds Heated fuel pre-filter ECAS remote control DAF Connect Adaptive cruise control with FCW and AEBS-3 Front axle 1, 8,000 kg, load index 156 Whole Vehicle Type Approval (WVTA) Standard service interval Steel air reservoir Safety net on both bunks Door trim: loosely woven fabric Cab wall trim textile Application class 0 Standard chassis preparation Electronic stability control (VSC) Toll preparation Operation of fixed fifth wheel Standard noise level Lane departure warning system Electric window lifters Pollen filter Brake performance monitoring LED daytime running lights Driver Performance Assistant CO2 display: Y Adjustable roof spoiler for XG cab Generator 110 A, batteries 2 x 210 Ah AGM EAS unit right, rear overhang 85 l AdBlue, mudguard left Electrical trailer connection 24V/15-pin cable: 15-pin + EBS ks: 845 step left +620 right, H 620 mm Wheelbase 4.00 m/rear overhang 0.99 m Upper bunk Side panels Rear: air suspension SR1347 Rear axle ratio 2.53 MX-13 engine, 390 kW/530 HP, cab emblem: 530 JOST JSK42, cast iron, 150 + 12 mm Nlsdpfx Akox I T Iwsujb 12-speed TraXon transmission 12T

Condition: used, mileage: 95,000 km, power: 390 kW (530.25 HP), first registration: 02/2025, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FT XF 530 PXP NGD CRYSTAL WHITE LED daytime running lights Fixed cab entry Air-suspended cab Sleeper High Cab Central locking External sun visor Two LED lights for cab rear panel Headlamp washers Signal horns, 2 sets DAF Corner View LED headlights and fog lights Chassis color: anthracite grey CRYSTAL WHITE Cab interior trim: Hexagon Cab wall lining textile Roller blind driver’s side Dashboard table Parking heater with heat pump and timer Electric window lifters Pollen filter Luxury interior trim color scheme Medium storage compartment Leather steering wheel Driver’s seat: Luxury Air Passenger seat: Cinema and table, fabric cover Door panel: Loosely woven fabric Xtra Comfort mattress for lower bunk Upper bunk bed Automatic cab climate control Safety net on both bunks Curtains with partition curtain Refrigerator and drawer Nsdpfoy Aq Tasx Akujlb Armrests on both sides of driver’s seat Accessory power supply: Standard + 2x 40 A Luxury LED interior lighting ECAS remote control with extended functions Adaptive cruise control with FCW and AEBS-3 DAF Connect Driver Performance Assistant Wireless charger Digital tachograph, VDO 1C, version G2V2 Toll preparation Speed limiter setting: 90 km/h FMS connector, extended and prepared DAF Infotainment Luxury Plus, Exclusive speakers Antennas: DAB-prepared radio, 2x mobile, GNSS Extra: CB Vehicle stability control (VSC) Standard immobilizer Alcohol interlock preparation Lane departure warning system Reversing warning system Turn assistant Stabilink rear axle suspension Front leaf suspension: standard Front axle 1, 8,000 kg, load index 156 Rear axle capacity 13.00 t Axle load monitoring Front: 8.00 t, parabolic, 183N Rear: air suspension SR1347 Rear axle 1, 13,000 kg, load index 149 Silver-gray wheel trim rings Tire pressure monitoring system Front axle(s): 385/65R22.5 Driven rear axle(s): 315/80 R22.5 Alcoa Dura-Bright aluminum wheels 32 mm F1,385/65R22.5 R1,315/80R22.5 Automated gearbox, TraXon, 12 speeds Traction control (ASR) Emissions standard Euro 6 Off-road mode with rocking function ECO performance Rear axle ratio 2.69 Mechanical differential lock 12-speed TraXon gearbox 12TX2620 DD, 16.69-1.00 MX-13 engine, 390 kW/530 hp, cab emblem: 530 2-cylinder compressor without clutch Driven rear axle with disc brakes Pneumatic parking brake control ZF Intarder Front underrun protection Rear mudguards Fuel tank left Side rail 260/6.0 mm, without internal reinforcement 620 l aluminum fuel tank, left, height 620 mm Left walkway step LED work lights Wheelbase 3.80 m / rear overhang 0.99 m Aluminum air reservoirs Exhaust pipe upwards LED rear lights Vertical, high exhaust pipe EAS unit right, vertical, t + 80-l AdBlue mudguard left SAF S36-20, cast iron, 185+40 mm, low-maintenance Electrical connection trailer 24V/15-pin Cable: 15-pin + EBS Chassis prep with hydraulic front axle from PXP Fixed connection engine speed control, chassis Permanently wired body signals and warnings First gearbox PTO NH/4c-R-32/25 Rear engine PTO, 13 h, continuous, pump drive Battery energy monitoring Alternator 110 A, batteries 2 x 175 Ah Heated fuel pre-filter Top air intake with cyclone filter Dust shield PAUL PXP (GER) for XF - FT, box mounted right A-shield Tunnel mat – DAF XF / XG / XG+ Rubber floor mats – DAF XF / XG / XG+ 2 low-profile, LED rotating beacons on cab roof

Condition: used, mileage: 333,104 km, power: 355 kW (482.67 HP), first registration: 05/2023, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 05/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FT XG 480 CRYSTAL WHITE Headlight beam for right-hand traffic Longitudinal frame member 260/6.0 mm, without internal reinforcement Wheelbase 4.00 m/rear overhang 0.99 m Maximum ambient temperature 38 degrees Steering with Euro certificate Single-circuit steering Standard component arrangement Rear: Air suspension SR1344 Main mirrors Pneumatic control for parking brake Type plate: Standard (EU) Shunting mode FMS connector, extended and prepared XG cab JOST JSK42, cast iron, 150 + 12 mm Armrests on both sides of the driver’s seat Rear axle load capacity 13.00 t 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 LED skylights Left-hand drive Tempered glass Dashboard design: Plateau Front leaf suspension: standard Headlights without height adjustment Interior trim color scheme: Exclusive Driver’s seat, fixed base Additional cab insulation Passenger seat, fixed base Auxiliary cab heater with heat recovery pump and timer Cab interior design: Hexagon Front: 8.00 t, parabolic spring, 163N Compressor 2-cylinder, without clutch LED interior lighting Dashboard table Automated manual transmission, full version Front chassis design: Floor plate Basic immobilizer Exhaust pipe center Digital tachograph, VDO 1C, version G2V1 Windshield Kingpin diameter 2 inches Tail lights with bulbs Stabilink rear axle suspension Driven rear axle(s): 315/70 R22.5 Emission class Euro 6 Seat belts black Front air intake Techn. permitted max. chassis weight 20500 kg Max. permissible combination weight driven axle 44000 kg Class 2 Wheel trims silver-grey Chassis color anthracite grey Traction control (ASR) Headlight housing color: Crystal White CRYSTAL WHITE Roof spoiler color: Crystal White Fixed cab entry Side fender color: Crystal White Side skirt color: Crystal White Bumper color: Crystal White Driven rear axle with disc brakes Single ride height position, standard height Fifth wheel lead dimension 620 mm Rear mudguards Splash protection Front underrun protection Pneumatic connection for trailer, rotary coupling Catwalk with step, standard Exhaust pipe horizontal, low Body connector on chassis Steel disc wheels, silver-grey Nlsdpfsx I T Nbox Akusb Speed limiter setting 90 km/h Catwalk step left Work lights, LED Standard transport, full version Automated TraXon transmission, 12 speeds ECO power Heated fuel pre-filter DAF Connect Rear axle ratio 2.38 Fuel tanks left and right Adaptive Cruise Control with FCW and AEBS-3 Front axle 1, 8,000 kg, load index 156 Whole vehicle type approval (WVTA) Rear axle 1, 13,000 kg, load index 149 Standard maintenance interval Protective net on both bunks Door trim: loosely woven fabric Cab rear wall trim textile Application class 0 Standard chassis preparation Electronic Stability Control (VSC) Toll preparation Operation of fixed (non-sliding) fifth wheel Standard noise level Lane departure warning system Electric windows Pollen filter LED daytime running lights Driver Performance Assistant CO2 display: Y Adjustable roof spoiler for XG cab Central locking Alternator 110 A, batteries 2 x 210 Ah AGM EAS unit right, rear overhang 85-l-AB mudguard left LED headlights and fog lights Electrical connection trailer 24V/15-pin cable: 15-pin + EBS ks: 765 step left + 430 right, H 620 mm Antennas: DAB-prep. radio, 2x mobile, GNSS extra: CB Upper bunk Analog gear auxiliary control, k

Condition: used, mileage: 1,640 km, power: 212 kW (288.24 HP), first registration: 12/2025, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space length: 7,300 mm, loading space width: 2,496 mm, loading space height: 2,369 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FA XB 290 16t Spier Plywood Box Body * 16 t distribution, sleeper cab * Mechanically reinforced cab suspension * Long-distance driver cab * Central locking, 3 keys, 2 remote controls * External sun visor, green translucent * Fog lights and cornering/turning lights * Halogen headlights * Daytime running lights * Green-tinted windows * Reversing camera * Adjustable roof spoiler * ETD white * Pneumatic steering column lock * Roof hatch with manual operation * Driver's seat: Air-suspended luxury driver's seat * Auxiliary heater Air Top 2000 * Lower sleeper bunk, standard height * Curtains * Armrest driver's seat * ECAS remote control * Converter 24V to 12V, 15A, 180W * Passenger seat: Fixed, velour * Air conditioning * Power windows: electric Nlodpfx Aexmpifekueb * Digital tachograph, VDO 1C, Version G2V2 * Adaptive cruise control with FCW and AEBS-3 * Toll system preparation * Speed limiter setting 85 km/h * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS interface, prepared * FM/DAB/DAB+ radio with speaker incl. phone interface * Driver Performance Assistant * Lane departure warning system * Electronic Stability Control (ESC) * Rear warning system * Hill start assist * DAF Side and Turn Assist * Alcohol interlock, prepared * Speed limit recognition * DAF Drowsiness Detection * Compliant with UN regulations R155 and R156 * Rear: 10.50 t, air suspension, SR10.15 * Normal centre of gravity * Front: 6.00 t, parabolic, 60N * Front axle 1, 6,000 kg, load index 146 * Rear axle 1, 10,500 kg, load index 142 * Goodyear * Tire pressure monitoring system * Front axle(s): 285/70R19.5 * Driven rear axle(s): 285/70R19.5 * F1, 285/70R19.5 GO KMAXS2 146/144 L Steering CCA 3P * R1, 285/70R19.5 GO KMAXD2 146/144 L Traction CCA 3P * Rear axle ratio 4.63 * Mechanical differential lock * 8-speed PowerLine 8AP1200 overdrive transmission, 4.89–0.64 * Engine PX-7, 212 kW/287 hp. Cab emblem: 290 * Emission standard Euro 6 * Traction control (ASR) * Idle shutdown automatic, 5 minutes * Automatic gearbox PowerLine, 8-speed * Parking brake with test position * Exhaust brake * Wheelbase 5.60 m / rear overhang 2.40 m * Aluminium fuel tank, 340 l * Front underrun protection * AdBlue® tank 30 l, right chassis side * AdBlue® tank filler cap without lock * Rear combination lamps with bulbs * Battery box left * Longitudinal members 270/6.0 mm, without inner reinforcement * EAS unit right, discharge right to rear * Use with drawbar, type plate, up to max. GCW * Pneumatic connection for trailer, rotary coupling * Cross member D137 + Ringfeder coupling D200, installed * Electrical connection for trailer + EBS, 24V/2x7-pin * Body mounting BAM 1, loose consoles * Plug connection for stationary engine speed control chassis * Body plug on chassis * Side marker lights * Tail lift application * Generator 100 A, batteries 2 x 175 Ah * Max. GCW (driven axle) 28,000 kg * Technically permissible chassis weight max 16,000 kg * Air intake top, behind cab * Heated water separator * Warranty Plus powertrain – 3 years / 200,000 km Day registration 12.12.2025 Payload: 8,690 kg Body: Spier Athlet 6 Internal body length 7,300 mm » Galvanised steel rear frame, top-hinged tailgate with gas springs » Subframe as steel construction, cross member spacing 500 mm » Floor approx. 24 mm thick, made of special multi-layer glued panels, double-sided film-coated, surface: anti-slip phenolic (rough). Permissible wheel load: 1,700 kg with wheel dimension of

Condition: new, power: 212 kW (288.24 HP), fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Equipment: * Reinforced mechanical cab suspension * Extended Day Cab * Central locking, 3 keys, 2 remote controls * External sun visor, green, translucent * Fog lights and cornering/turning lights * Halogen headlamps * Daytime running lights * Green-tinted windows * Electrically adjustable mirrors * Front-view mirror * Mirror brackets, bodywork width 2.50 - 2.60 m * Headlight beam pattern for right-hand traffic * Reversing camera * Traffic white (verkeers-wit) paint * Headlight bezels and bumper in cab color * Lower section protection, cab side and fender trim in cab color * Chassis color: anthracite grey * Pneumatic steering column lock * Roof hatch with manual operation * Driver's seat: air-suspended luxury seat * Auxiliary air heater Air Top 2000 * Armrest on driver's seat * ECAS remote control Nodpey A Uu Usfx Akuslb * Converter 24V to 12V, 15A, 180W * Soft-touch black steering wheel * Passenger seat: fixed velvet upholstery * Engine tunnel storage compartment * Air conditioning * Digital tachograph, VDO version G2V2A * Speed limiter setting: 90 km/h * FMS interface, pre-installed * Adaptive Cruise Control with FCW and AEBS-3 * Toll system preparation * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FM/DAB/DAB+ radio with speaker incl. phone connection * Driver Performance Assistant * Lane change warning system * Electronic Stability Control (VSC) * Reverse warning system * Basic immobilizer * Hill start assist * DAF Side and Turn Assist * Alcohol interlock preparation * Speed limit recognition * DAF Drowsiness & Distraction Detection * Compliant with UN regulations R155 and R156 * Rear: 10,500 kg, air suspension, SR10.15 * Front: 6,000 kg, parabolic leaf springs, 60N * Front axle 1: 6,000 kg, load index 146 * Rear axle 1: 10,500 kg, load index 142 * Silver grey wheel trim rings * Goodyear tires * Tire pressure monitoring system * Front axle(s): 285/70R19.5 * Driven rear axle(s): 285/70R19.5 * Steel wheels, silver grey * F1, 285/70R19.5 GO KMAXS2 146/144 L Steering CCA 3P * R1, 285/70R19.5 GO KMAXD2 146/144 L Traction CCA 3P * Rear axle ratio: 4.63 * Mechanical differential lock * 8-speed PowerLine 8AP1200 overdrive transmission, 4.89-0.64 * PX-7 engine, 212 kW/287 hp. Cab badge: 290 * Emissions standard: Euro 6 * Traction control (ASR) * Standard transport, full version * Idle shut-off, 5 minutes * Automatic PowerLine transmission, 8-speed * Parking brake actuation with test position * Exhaust brake * Wheelbase: 4.80 m / rear overhang: 2.63 m * One wheel chock * Aluminum fuel tank, 340 l * Splash guards * AdBlue® tank 30 l, right side of chassis * AdBlue® tank filler cap without lock * Longitudinal members 270/6.0 mm, without inner reinforcement * Pneumatic trailer connection, turntable coupling * Cross member D85-Dc70-V25, coupling D85 A, mounted * Trailer electrical connection + EBS, 24V/2x7-pin * Body mounting BAM 1, loose brackets * ECAS control * Side marker lights * Tail lift preparation * Fixed right-hand steering, no first right * Alternator 100A, batteries 2 x 175 Ah * Permissible gross chassis weight max 16,000 kg * Air intake at top, behind cab * Cold climate version * Heated water separator * Plus drivetrain warranty - 3 years/200,000 km Body: * ZIKUN Swing-Board I bodywork * Technical data: Through-loading length: 6,150 mm * Loading length: 6,300 mm * Through-loading width of rear portal: 2,480 mm * Internal loading width: 2,480 mm * External width: 2,550 mm * Through-loading height: 2,050 mm * Loading height approx.: 1,137 mm * Overall he

Condition: used, mileage: 369,000 km, power: 390 kW (530.25 HP), first registration: 09/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 09/2024, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FT XG 530 Central locking Headlight beam pattern for right-hand traffic LED headlights Longitudinal frame members 260/6.0 mm, without internal reinforcement Maximum ambient temperature 38°C Antennas: DAB-prepared radio, 2x mobile, GNSS Steering with Euro certificate Single-circuit steering Automatic climate control and air conditioning Mechanical cab suspension Standard component layout Main mirrors Pneumatic park brake control Type plate: Standard (EC) Grab handle and trim: black, side wall: cab color Maneuvering mode Front mirror XG cab Passenger seat: cinema, fabric upholstery Armrests on both sides of the driver seat Rear axle load capacity 13.00 t LED skylights Left-hand drive Tempered glass Dashboard design: plateau Front leaf suspension: standard Headlights without height adjustment Interior trim color: Exclusive Driver seat, fixed base Additional cab insulation Passenger seat, fixed base Auxiliary heater with waste heat pump and timer Cab interior trim: Hexagon Nlsdpfsx I T Nhex Akuob Steering wheel with silver accents Front: 8.00 t, parabolic, 163N Compressor 2-cylinder without clutch LED interior lighting Dashboard table Foam mattress for lower bunk Automatic transmission with manual override, full version Front chassis configuration: base plate Basic immobilizer Center exhaust pipe Windshield Kingpin diameter 2 inches Rear lights with bulbs Stabilink rear axle suspension Driven rear axle(s): 315/70 R22.5 Emission class Euro 6 Black seat belts Front air intake Max. permissible gross train weight drive axle: 50,000 kg, class 3 Chassis color: anthracite grey Traction control (ASR) Mirror housing black Headlamp surround color: Crystal White CRYSTAL WHITE Fixed cab entry steps Bumper color: Crystal White Driven rear axle with disc brakes One ride height position, standard height Center storage compartment KA fifth wheel dimension 620 mm Rear mudguards Splash protection FMS interface, pre-installed Front underrun protection Pneumatic connection for trailer, turntable coupling Walkway with access step, standard Horizontal, low-mounted exhaust pipe Body connector on chassis Steel wheels, silver grey Walkway access step, left Work lights, LED Standard transport, full version Automated gearbox, TraXon, 12-speed Heated fuel pre-filter ECAS remote control DAF Connect Adaptive cruise control with FCW and AEBS-3 Front axle 1, 8,000 kg, load index 156 Whole vehicle type approval (WVTA) Standard maintenance interval Steel air tanks Safety net on both bunks Door trim: loosely woven fabric Cab wall trim: textile Application class 0 Standard chassis preparation Electronic stability control (VSC) Toll system preparation Operation for fixed fifth-wheel coupling Lane departure warning system Electric windows Pollen filter Brake performance monitoring LED daytime running lights Driver Performance Assistant CO2 display: Y Adjustable roof spoiler for XG cab Generator 110 A, batteries 2 x 210 Ah AGM EAS unit right, rear overhang 85-l AdBlue fender left Electrical connector, trailer 24V/15-pin cable: 15-pin + EBS ks: 845 step left + 620 right, H 620 mm Wheelbase 4.00 m / rear overhang 0.99 m Upper bunk Side paneling Rear: air suspension SR1347 Rear axle ratio 2.53 MX-13 engine, 390 kW / 530 hp, cab badge: 530 JOST JSK42, cast iron, 150 + 12 mm 12-speed TraXon gearbox 12TX2620 DD, 16.69–1.00 DA

Condition: used, mileage: 283,000 km, power: 355 kW (482.67 HP), first registration: 05/2023, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 05/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FT XG 480 CRYSTAL WHITE Headlamp beam pattern for right-hand traffic Longitudinal frame members 260/6.0 mm, without inner reinforcement Wheelbase 4.00 m/rear overhang 0.99 m Maximum ambient temperature 38°C Steering system with EU certificate Single-circuit steering Standard component arrangement Rear: Air suspension SR1344 Main mirrors Pneumatic control for parking brake Type plate: Standard (EC) Shunting mode FMS connector, extended and prepared XG cab JOST JSK42, cast iron, 150 + 12 mm Armrests on both sides of the driver’s seat Rear axle load capacity 13.00 t 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 LED skylights Left-hand drive Hardened glass Dashboard style: Flat Front leaf suspension: standard Headlamps without height adjustment Interior trim color: Exclusive Driver’s seat, fixed base Additional cab insulation Passenger seat, fixed base Auxiliary heater with heat recirculation pump and timer Cab interior decoration: Hexagon Front: 8.00 t, parabolic, 163N Compressor 2-cylinder w/o clutch LED interior lighting Dashboard table Automated transmission with manual override – full version Front chassis spec: Floor panel Basic immobilizer Central exhaust pipe Digital tachograph, VDO 1C, version G2V1 Windshield Kingpin diameter 2 inches Rear lights with bulbs Stabilink rear axle suspension Driven rear axle(s): 315/70 R22.5 Emission standard Euro 6 Seat belts black Front air intake Permissible chassis weight max. 20,500 kg Max. permissible gross train weight 44,000 kg, class 2 Silver-grey wheel trim rings Chassis color anthracite grey ASR (traction control system) Headlamp surround color: Crystal White CRYSTAL WHITE Roof spoiler color: Crystal White Fixed cab entry Side fender color: Crystal White Side skirt color: Crystal White Bumper color: Crystal White Drive rear axle with disc brakes One ride height position, standard height Fifth wheel sliding lead 620 mm Rear mudguards Splash guards Front underrun protection Pneumatic connector for trailer, rotary coupling Catwalk with step, standard Exhaust pipe horizontal, low Body connector on chassis Steel disc wheels, silver-grey Speed limiter setting: 90 km/h Catwalk step left Work lights, LED Standard transport, full version Automated gearbox, TraXon, 12 speeds ECO performance Heated fuel pre-filter DAF Connect Rear axle ratio 2.38 Fuel tanks left & right Adaptive cruise control with FCW and AEBS-3 Front axle 1, 8,000 kg, load index 156 Whole Vehicle Type Approval (WVTA) Rear axle 1, 13,000 kg, load index 149 Standard maintenance interval Safety net on both bunks Door trim: loosely woven fabric Cab wall lining textile Application class 0 Standard chassis preparation Electronic stability control (ESC) Nlsdpfx Aex I T I Rskujb Toll system preparation Non-sliding fifth wheel operation Standard noise level Lane departure warning Electric window lifters Pollen filter LED daytime running lights Driver Performance Assistant CO2 display: Y Adjustable roof spoiler for XG cab Central locking Alternator 110 A, batteries 2 x 210 Ah AGM EAS unit right, rear overhang 85 l AdBlue mudguard left LED headlamps and fog lights Electrical connection trailer 24V/15-pin cable: 15-pin + EBS ks: 765 step left + 430 right, height 620 mm Antennas: DAB prep. radio, 2x mobile, GNSS-extra: CB Upper bunk Analog transmission PTO control, k

Condition: ready for operation (used), Year of construction: 2020, overall weight: 2,485 kg, This 3-axis Elumatec DG 244 was manufactured in 2020. It features a cutting length of 6.0 m and a maximum saw blade diameter of 550 mm, providing efficient cutting capabilities. The machine includes a complete extraction unit and a mobile workpiece support for enhanced functionality. If you are looking to get high-quality circular metal cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details. Njdpfx Aksy Tm Sajuslb - Cutting Length: 6.0 m- Saw Blade Diameter: Max. ø 550 mm- Saw Blade Bore: d 30 mm- Saw Blade Speed: 3000 1/min- Voltage: 3/PEN 400 V- Frequency: 50 Hz- Current: 21.8 A- Power: 9.2 kW- Operating Pressure: P 7 bar- Short-circuit current rating: Ik 10KA- Machine Weight: 2485 Kg- Included Components / Accessories:- Short-length stop for stationary aggregate- Complete extraction unit DG244 2x2.2kW- Profile lifting bar set for stationary and mobile aggregate- Pneumatic clamping device horizontal, per aggregate -230mm- Mobile workpiece support- Moving roller conveyor 1.5 m long, 400 mm wide for extraction unit

Condition: excellent (used), Year of construction: 2010, Helmerding Press Type: KDH 315/2100/2 Pressing force: 3,150 kN Stroke height: 40–200 mm Strokes per minute: 20–100 min⁻¹ Ram adjustment: 120 mm Shut height: 500 mm Table size: 2,000 x 1,200 mm Ram surface: 2,000 x 1,100 mm Machine weight: 44,000 kg Njdpoy Tqahofx Akuelb Helmerding Roller Feeder Type: EWH 800/150 Strip width: 100–800 mm Strip thickness: 0.5–6.0 mm Helmerding Straightening Machine Type: R-70/800/9-S Strip width: 100–800 mm Strip thickness: 0.5–5.0 mm Roll diameter: 70 mm Number of straightening rolls: 9 pcs Helmerding Decoiler Type: HE-4/800/MOT/HYD Strip width: 100–800 mm Max. coil weight: 4,000 kg Coil inner diameter: 508 mm Coil outer diameter: 1,000–1,600 mm

Condition: excellent (used), Year of construction: 2001, Kaiser Punching Press Model: KSTU 4000-25-6P Press force: 4,000 kN Table size: 2,500 x 1,250 mm Ram surface: 2,500 x 1,100 mm Shut height: 700 mm Ram stroke: 40-250 mm Ram adjustment: 200 mm Strokes per minute: 20-100 1/min Control: Siemens S7 Required space: 4.8 x 3.2 x 4.8 m (LxWxH) Weight: 78,000 kg PBK Straightening Machine Strip width: 120 - 800 mm Strip thickness: up to 6.0 mm ARKU Decoiler Njdpfx Aey Tp U Dskuolb Load capacity: 8,000 kg

Condition: excellent (used), Year of construction: 2001, HELMERDING Press KDH 400/2600/2 Pressing force 4,000 kN Stroke rate 15-60 strokes/min Stroke adjustment 80-250 mm Ram adjustment 175 mm Installation height 550-800 mm Nedpfjy Tp Uqsx Akuslb Table surface 2,500x1,600 mm Ram surface 2,500x1,400 mm Pass-through hole in the press table 1,300x800 mm Weight 106,000 kg Strip feed system EWH 600/150 Strip width 80-600 mm Strip thickness 0.6-6.0 mm Max. coil weight 7,500 kg Transfer system GT-X500-Y200-Z100 DX stroke (feed) 578 mm DY stroke (closing) 300 mm DZ stroke 600 mm Z adjustment (table bottom edge) 50-650 mm Clearance 400-1000 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Nedpfx Aey Ti E Nokuelb Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: excellent (used), For sale: professional German paper multi-spindle drill HANG 106 DTK 20. Industrial-grade equipment, ideal for bookbinding shops, printing houses, or the production of binders and calendars. Model: HANG 106 DTK 20 Nodpfeudl Anex Akuslb Manufacturer: Constantin Hang Maschinenfabrik Göppingen Number of spindles: 4 Drilling diameters: • Cardboard/paper: up to 3.0 mm • Material samples: 2.5 mm / 6.0 mm / 12.0 mm Drive: PRYM Getriebebau geared motor, 50/60 Hz Stable cast iron construction Adjustable work table Complete machine, ready for operation Technical condition: very good. Used but well-maintained, no play, with original nameplates and operating documentation.

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD2200Y FANUC 0IT PLUS CNC LATHE WITH Y AXIS. MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 4,000 RPM MAIN SPINDLE. ▪ 6,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET - BMT55P ▪ HARDENED & GROUND BOX GUIDEWAYS Swing Over the Bed Ø 820 MM Swing Over the Carriage Ø 650 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 610 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 76 MM Spindle Speed (Rpm) 4,000 RPM Motor (Max / Cont.) 18.5 / 15.0 [22.5 / 15.0] KW Torque (Max / Cont.) 206.2 / 125.4 [215.0 / 143.3] NM Spindle Type BELT Spindle Nose A2-6 Travel X 215 MM Travel Y 110 (± 55) MM Travel Z 680 MM Rapid Speed X 24 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 30 M / MIN HARDENED & GROUND BOX GUIDEWAYS Number of Tools 12 [24] Tool Size - OD 25 MM² Tool Size - ID Ø 20 MM Indexing Time 0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7] KW Milling Tool Speed 6,000 RPM Torque (Max / Cont.) 52.5 / 26.5 NM Collet Size Ø 16 – ER25 Type BMT-55P TAILSTOCK Taper MT 4 Quill Diameter Ø 80 MM Quill Travel 120 MM Travel 680 MM TANK CAPACITY Coolant Tank 200 L Lubricating Tank 2.0 L Electric Power Supply 27 KVA Thickness of Power Cable OVER 25 MM² Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,380 x 1,800 MM Height 1,950 MM Weight 4,700 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CHIP - CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 6.0 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD TURRET UPGRADE - 12 STATION 24 POSITION BMT55P, LIVE TOOLS 6K RPM, 5.5 KW STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE Nlsdpfx Akex Th Nysujb CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) FRONT DOOR INTERLOCK TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER

Condition: good (used), functionality: fully functional, total height: 1,500 mm, total width: 1,700 mm, total length: 2,250 mm, type of input current: three-phase, overall weight: 500 kg, film width: 650 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (max.): 199 mm, nominal power: 4.5 kW (6.12 HP), Side sealing machine – in very good condition, fully functional For sale is a high-quality side sealing machine in very good, well-maintained condition. The machine is fully functional and has been regularly serviced. The side sealing machine is ideal for the professional packaging of products with shrink film and ensures uniform, clean packaging results. Details: Very good, well-maintained condition Fully functional Uniform heat distribution Robust industrial design Ideal for production and packaging lines The machine can be inspected and tested on-site by arrangement. If you are interested or have any questions, please do not hesitate to contact us. Nlodey Ttrmjpfx Akujb Data sheet Box Motion Side Sealing Machine DEAPSS-5025BM Model DEAPSS-5025BM Applicable films (half-tube): POF / PP / PE Sealing mechanism 1: Longitudinal sealing (pneumatic) Sealing mechanism 2: Traveling transverse sealing (pneumatic) Sealing blade width (transverse): 500 mm Maximum product height: 199 mm Maximum format width (W + H): 450 mm* Maximum roll size (L x Ø): 650 x Ø 300 mm Machine size (L x W x H): 2250 x 1700 x 1500 mm Conveyor belt speed: 35 m / minute Maximum power consumption: 4.5 kW Connection voltage: 400 V / 3 phases Sealing cycles: up to 100 pieces / minute Air pressure (dry air): 6.0 bar Machine weight: approx. 450 kg

Year of construction: 2011, condition: good (used), Offer 24370 Sludge filtration system in a sea container + conveyor belt Nljdpfx Ajt Srkpokueb Technical data: - Sludge filter press JUNGHANS with cylinder unit - Flocculation system - Pumps - Separate conveyor belt for sludge removal, length 8.0 m - Control cabinet with electrical equipment - Water collection tray made of aluminum on the entire container floor - Lighting - Sea container with 4 doors - Space requirement for the container: approx. W 6.0 x H 2.4 x D 2.4 m - Weight: approx. 5000 kg - Space requirement for the conveyor belt: approx. W 8.0 x H 0.8 x D 1.0 m - Weight: approx. 1000 kg

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Timme automatic stacking machine with slat magazine. Nlodpfx Akey S Ucweusb Transfer carriage with hydraulic lifting table. Siemens S7 control system. Lengths up to 6.0 m. Very little use, available due to restructuring. We can gladly send a video showing the machine in operation.

Condition: used, mileage: 510,565 km, power: 335 kW (455.47 HP), first registration: 08/2009, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: semi-automatic, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, Equipment: * Body/Construction: 3-way tipper * Cab: M (medium length), * Trailer brake: 2-line system, * Moveable cab entry, * Air filter: Construction vehicle filter, * PTO: MB 2C, Nedpfsyul Axox Akuslb * Driver’s seat: Comfort air suspension seat, * Sun visor, * Front bumper: steel version, * Roof hatch (steel), * Cab: suspension for rough roads (6.0 HZ), * Additional step for construction vehicles, * Telligent 16-speed gearbox, Superstructure: * Dautel body * Bordmatik left side Technology: * CD radio comfort package * Bluetooth hands-free system, * Rotating beacons left/right, * Central locking incl. key, * Exterior mirrors electrically adjustable and heated, Safety/Environment: * Voith retarder, * Rear axle differential lock, * Telligent brake system with ABS+ASR, * Emission standard EURO 5, Miscellaneous: * Axle configuration: 8x4/4, * Suspension: leaf/leaf, * Engine: 12.0 L – 335 kW V6 Diesel (OM 501 LA), * Perm. gross vehicle weight: 32.00 t Since 1972, your reliable partner for automobiles/commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles available, including vans, commercial vehicles, and construction equipment! We continuously offer attractive financing opportunities at special rates. If interested, we are happy to provide an individual quotation! Trade-in of your commercial vehicle/construction machine is welcome. If you require a new TÜV inspection, we’re happy to provide an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle by our external partners is possible at additional cost. The information provided in advertisements, on the Internet, in price tags and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing or transmission errors. Listed equipment/features may need separate verification. Subject to error and prior sale.

Condition: used, mileage: 510,565 km, power: 335 kW (455.47 HP), first registration: 08/2009, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: semi-automatic, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, Equipment: * Bodywork/Structure: 3-way tipper body * Cab: M (medium length) * Trailer brake: 2-line system * Movable cab entry * Air filter: construction vehicle filter * PTO: MB 2C * Driver’s seat: air-sprung comfort seat * Sun visor * Front bumper: steel version Nlsdpjyul Arjfx Akusb * Roof hatch (steel) * Cab: reinforced mounting for rough terrain (6.0 HZ) * Additional step for construction vehicles * Telligent transmission, 16-speed Body: * Dautel bodywork * Bordmatik (automatic drop side) on left Technology: * CD-radio comfort version * Bluetooth hands-free system * Rotating beacon, left/right * Central locking system incl. key * Exterior mirrors, electrically adjustable and heated Safety/Environment: * Voith retarder * Rear axle differential lock * Telligent brake system with ABS + ASR * Emissions standard: EURO 5 Other: * Axle configuration: 8x4/4 * Suspension: leaf / leaf * Engine: 12.0 L – 335 kW V6 diesel (OM 501 LA) * Permissible gross vehicle weight: 32,00 t Since 1972, your reliable partner for all things automotive and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide an individual quotation! Trade-in of your commercial vehicle/construction machine is welcome. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle by our external partners is possible at an extra charge. The information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute warranted characteristics. The seller assumes no liability/warranty for incorrect entries or transmission errors. Listed equipment must be verified separately if required. Subject to change and prior sale.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Two-crank mechanical press with a rigid frame structure. Manufactured by: SIMPAC INC., South Korea – 2019. 3-in-1 feeder line TAE IN TECH TNCL-5042 with an unwinder. Pressing force: 300 tons. Nlsdpfx Aoy Twk Tskusb Maximum pressing point (R.T.P.): 6.0 mm before the lower dead center. Slider stroke: 250 mm. Working speed: 22 – 45 strokes/minute (continuously adjustable with a frequency converter). Maximum die height: 650 mm. Slider adjustment: 120 mm. Work table: 2650 x 1100 mm, thickness 200 mm. Slider: 2350 x 1000 mm. Air pressure: 5 bar. Overall dimensions (L x W x H): 3600 x 2800 x 4650 mm. Machine weight: 50,000 kg. Motor power: 37 kW. Total weight of the line: approximately 56 tons. Total power consumption of the line: approximately 55-60 kW.

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: Nledpfx Ajy Swq Rjkuob X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Year of construction: 2021, condition: used, machine/vehicle number: 117500730003, Temperature control unit from manufacturer Regloplas, used and untested. The device is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates in a dual-circuit system with the RT100 control system. The medium used is pressurized water, with a maximum supply temperature of 160 °C. Heating capacity is 38 kW, pumping capacity is 2x 60 l/min at 6.0 bar. The unit features two magnetic coupling pumps (Speck CY-4281). Year of manufacture: 2021, total weight: 230 kg. Njdpfsy Suikjx Akuolb

Year of construction: 2021, condition: used, machine/vehicle number: 117500730004, Temperature control unit by Regloplas, used and untested. The device is intended for applications in mold temperature control, injection molding, and industrial process engineering. It operates as a dual-circuit system with the RT100 control unit. The medium used is pressurized water, with a maximum supply temperature of 160 °C. Heating capacity is 38 kW, and pump performance is 2 x 60 l/min at 6.0 bar. The unit is fitted with two pumps (CY-4281.0823). Year of manufacture: 2021. Total weight: 230 kg. Njdpfxey Suhye Akuolb

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Nodpfxoy St Uro Akuelb

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Nedowkaalspfx Akujlb Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.