Used Sealing Insert for sale (4,268)

Condition: ready for operation (used), We offer this used SEALPAC 350 machine. Manufacturer: SEALPAC Model: 350 The machine was operational until recently. Njdeyr E Nmopfx Ag Dsla If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2015, operating hours: 10 h, functionality: fully functional, Tray Sealing Machine Model: ILPRA FOODPACK 400 N (sold together with 5,000 trays and the corresponding sealing film) Machine for cutting and heat-sealing with metallized film, compatible with pre-formed trays made of plastic, aluminium, and/or laminated cardboard. Tray dimensions: max. 280 x 32 h mm (in a single row). Mechanical operating speed: approximately 400 cycles/hour, depending on the type of material used and the characteristics of the product to be packed. Operation with vacuum and inert gas injection at a speed dependent on the vacuum level (4 cycles per minute). OPERATION AND DESCRIPTION: The FOODPACK 400N is a practical, robustly constructed machine. The conveyor movement and the unwind–rewind system are mechanically driven, and the sealing plate is pneumatically operated. The machine is controlled by a programmable logic controller (PLC). The construction of the FOODPACK 400N considers the special humidity conditions in the operating area. All parts that come into contact with the product, such as the work surface and housing, are made of stainless steel (S/S). Switchover to another tray format takes approximately 5 minutes. MACHINE SECTIONS: Tray loading section: The loader consists of guides for the trays (the guides are designed to correctly position the filled trays). After placing the tray in place, the operator advances it into the sealing area by pressing a lever. (A presence sensor permits successive operations only if the tray is correctly positioned.) After the heat-sealing operation, the operator must return the tray holder to the loading position, remove the sealed tray, and load the next tray for subsequent sealing. Film unwinding and rewinding group: This group automatically positions the required length of sealing film—drawn from the reel—under the sealing and cutting unit, and rewinds the scrap. This group can be fitted with a date coding device for printing manufacturing/expiry dates. Optionally, a centering device allows for accurate alignment of the printed image in the centre of the metallized film covering the tray. Nlsdpewxlqlefx Ag Dja Sealing and cutting section: In this group, the film is cut and sealed onto the tray (the cut matches the exact shape of the tray). Once the tray is positioned in the sealing area, the operator presses the START button to carry out the sealing and cutting operation. Both the upper and lower dies are manufactured according to the user-selected tray characteristics, and require a high degree of customization. The sealing plate is electronically timed, and each operation requires individual temperature adjustment. The section is equipped with a quick-change die system: releasing or securing the upper die can be done simply by turning a selector key on the control panel. Control panel: Equipped with a temperature controller for sealing temperature adjustment, a timer for sealing time, and a keypad with display for controlling machine functions, as well as START and EMERGENCY STOP buttons, main switch, and quick die-change selector. Section sequence: - Stainless steel (S/S) base. - Manual loading/unloading station. - Automatic film unwinding/rewinding system. - Sealing/cutting station. - Control panel.

Condition: like new (used), The VPX is used for: Nledpfx Asyn Hqqjg Dsa * Producing pouches from flat packaging material (film). * Filling the pouches with product which can be powdered, liquid, granulated, chunky and must have flowability and suitability for automated operation. * Closing the pouches by heat sealing or thermoplastic welding. Characteristics: * Roll diameter/width (max.): 450/550 mm (600/550 with unwinding device). * Bag width (min. - max.): 60-260 mm. * Bag length (min. - max.): 40-340 mm (680 mm with double drive). * Filling volume (max.): 3000 cm³ (8000 with double drag). Production output varies depending on product, format and filling capacity.

Condition: used, Year of construction: 2007, functionality: limited functionality, machine/vehicle number: FLEXIBAG FB BC 400, Equipment: documentation/manual, For sale: HASSIA REDATRON packaging machine Machine type: FLEXIBAG FB BC 400; Machine number: 152970 Year of manufacture: 2007; 3x400/230N-PE; 50Hz; 26kVA; 3x50A Net price: 18,000 EUR Nlodpfx Agjytr Uxs Dsa This is an industrial vertical packaging machine designed for forming, filling, and sealing bags. We encourage you to contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MP2510892, input voltage: 400 V, Hydraulic Clinch Press Miller MP645E, with vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-97KN (10 ton) Throath depth 650mm Zylinder stroke 200mm Travel speed 110mm/sec. Cycle time 3sec. 1200/hour Size H 2140mm x W 1070mm x D 1550mm Weight ca. 1500 Kg Electrical connection 400V, 3.0 KW Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Nljdpfx Aoirnaqeg Dja Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MP2506991, Hydraulic Clinch Press Miller MP645E, optional with feeding bowl for the installation of self-clinching studs, nuts, stand offs and other fasteners. Nsdsirm R Eopfx Ag Dola Technical data: • Press force 2-57KN (6 ton) • Throath depth 450mm • Zylinder stroke 200mm • Travel speed 120mm/sec. • Cycle time 3sec. 1200/hour • Size H 2200mm x W 800mm x D 960mm • Weight ca. 680 Kg • Electrical connection 400V, 2.2 KW The offered Miller Press is a demonstration machine from April 2022. It has been used for the installation of samples into customer sheets. In October the machine was exhibited on the Blech Expo in Hannover. Optional the machine can be equipped with an automatic vibration conveyor and automatic feeding tool. Thanks to the efficient hydraulic system, the high pressing force of 57KN and the repeatability of +/-1%, the machine can be used for most applications in a sheet metal processing company.

Condition: used, Year of construction: 2004, Format: 0x0 Equipment: Semi-automatic and automatic foil packaging machines Nledex N I Ubopfx Ag Dja Minipack Sealbag sealing machine For packaging printed materials such as magazines, booklets, and other printed materials Easy to operate and adjus

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 18GG1012, Neopost DS 180i inserter from test condition, practically NEW, barely used, only 17,245 inserts to the counter! The machine was fully inspected by a licensed technician on May 19, 2025 and is in absolutely mint and perfect condition, with no defects. Includes conveyor belt! Technical Specifications Max. Volume (per month) 180,000 Cycle speed up to 4,500 envelopes/hour Optional up to 5,500 envelopes/hour Collation capacity (multiple feed) up to 6,900 sheets/hour Optional up to 9,400 sheets/hour Envelope sizes: C6 (optional), A4, C6/5, C5 Adhesive container capacity: 10 liters Folding capacity: up to 8 sheets (80 g/m2) 22" touchscreen monitor: yes Nlodpewl Ihtjfx Ag Dsa Unlimited job memory Automatic job setting: yes Document/feeder capacity: up to 500 or 1,000 Envelope capacity: up to 800 Document paper thickness: min. 70 g/m2 - max. 120 g/m2 Max. insert thickness*: 4 mm *depending on the feeder module used Folding types: single, C-fold, zigzag, double parallel, and no-fold

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, 6 station swingarm machine, overhaul 2023 Nledpfx Agodyk Sde Dea completely new PLC machine control (no pitney bowes control) Operation via color touch panel electronic gripper controls, Program can be extended at any time and adapted to customer requirements, various reading systems can be integrated Roller ejection with programmable divert bin Warranty 1 year

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, C4 inserting machine Octoplus 4500, 6 stations (4 grippers + 2 friction feeders). Completely overhauled in 2022. Suitable for block thickness up to 20 mm. Price on request. Nlsdpfx Agoypgi Ae Doa

Condition: like new (used), TECMA SEALED CUPS DUAL PACKER x2, x4, x6 PACK CARTON YOM 2013 Njdpfx Agoyrx Uvo Dsla AS NEW CONDITION MADE IN FRANCE

Condition: used, Manual Socket Inserter Nodsuxt Ahopfx Ag Dola

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm Njdpfju Rwa Isx Ag Djla ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Nljdetx E Rqepfx Ag Dsa Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic Nsdpfjharwysx Ag Dola - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Weight approx. 800 kg good condition

Year of construction: 2021, condition: used, For sale: FM 3028 shrink wrap sealer from the renowned manufacturer ArkForm. This machine is designed for professional packaging of products in shrink film—ideal for manufacturing facilities, shops, wholesalers, and any environment where fast and visually appealing packaging is required. Technical data: • Model: FM 3028 • Manufacturer: ArkForm • Serial number: 202208631 • Year of manufacture: 2021 • Dimensions: 1000 × 620 × 1200 mm • Supply voltage: 230 V, 50 Hz • Power: 4.0 kW • Weight: 100 kg Description of operation: The machine seals the film and shrinks it onto the product at the same time. It features a heat chamber with a transparent cover for full monitoring and control of the packaging process. The film roll is mounted on the side of the unit, and the film guiding system allows for quick and convenient packaging preparation. Applications: • Food packaging (bakeries, confectioneries, grocery stores) • Packaging of cosmetics, books, media, electronics, and other products • Protecting items from dust, moisture, and transport damage Condition: The machine is in very good technical condition, complete, and ready for operation. Nsdoxlg Ntspfx Ag Dela

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200145, 2004 Buhrs BB300 Envelope Insertion Machine (with Intelmail VAF front end) Sr Nr: 200145 8 Station model currently running 6 AT25 rotary feeders with an MTS Sure-feed SE1200 PS/PC in the position of the last 2 hoppers. Spare AT25 rotary feeder & AS25 Shuttle feeder. Intelmail VAF front end fully integrated by Intelmail at supply in 2004. Buhrs specification: Envelope format: Standard envelopes with window min. C6 - 114 x 162 mm / 4 1/8 x 9 1/2 inch (No.10) DL-110x220mm max.B4 - 250 x 353 mm / 9 ¾ x 13 ½ inch flap length: max.: 55mm / 2 ¼ inch, min.: 20 mm / ¾ inch Paper quality (envelope): min. 75 gsm, max. 110 gsm Thickness of supplement material: max. 9 mm, / 3/8 inch Supply conveyor: min. 150mm / 6 inch, max. 330 mm / 13 ½ inch Paper quality (supplement material): min. 70 gsm VAF specification: Power requirements Voltage 110 - 240 volts A.C. Frequency 50 - 60 Hz Phase Single Power 200 Watts Thermal 170 Joules/s Physical Dimensions (Approx) - Length 1650 mm - Width 530 mm - Height 1200 mm - Weight 140 kg (308 lbs) General Sound Level 72 dBA Fold Unit - Letter fold sets: Up to 8 pages 85 gsm, [22lb]; Half fold sets: Up to 12 pages 85 gsm, [22lb] Paper Size range 145 x 180 mm to 296 x 420 mm Feed and Read Rate 50,000 + sheets per hour. [A4 sheets] Nljdpfx Ageyfwgds Doa Form sizes / A4 up to A4 [and A3 half folded] Paper Weights 60 - 200 gsm

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 45° 610-550 with inclined inlet 45° RA1279 The Gebhardt roller curve is from 2007 and in a good (used) condition. It has an engine of the brand SEW. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 010.05.1 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 45° Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Engine Type: SEW Gear Motor Nlsdpfx Agjk Aa Rro Doa Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.35 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 45 kg Scope of delivery: without supports and side guide (if necessary please enquiries) Optional Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003497 - Manufacturer Code: 2-083-01-0116 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service. Please contact us. Njdpfxjymd Uds Ag Dola

Condition: used, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Manufacturer: Budde Condition: used drive type: motorized -king shaft total length outside: ca. 1500 mm total length inside: ca. 1850 mm total width incl. motor: ca. 900 mm total width without motor: ca. 560 mm conveying width: approx. 540 mm Material: steel, plastic Color: light gray Including feet (height adjustable) and motor gear (north 0.55 KW) Discharger/ Infeed/ Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under heavy load. Nodpfx Aemxf Uvsg Dela Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: ready for operation (used), Year of construction: 1994, A used BECK flow wrapping machine Serienpacker is offered. Fully automatic film packaging machine with 4-side sealing principle, operates with two flat film rolls upper and lower film, processing films PE, PP, polyolefin. Inspection by appointment possible. Nlodpfoyk Hb Ujx Ag Dja

Year of construction: 2002, condition: used, Campagnolo Packaging Systems Vertical form and seal machine Nljdob Uahzspfx Ag Dea Model: C25 Serial:A02-02 420mm vertical seal x 260mm Jaws, print registration and Preston coder

Condition: good (used), Year of construction: 2014, Food Machinery Co E4230 VFFS bagger 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph Njdpfx Ajwtqrwog Dsla

Year of construction: 2005, condition: used, Book mark inserting machine Sigloch LEH 1 Year: 2005 Description: - Right hand infeed Nledpfeyid Rbjx Ag Dea - Scissor - Delivery to the left Book block format (max): 350 x 240 x 70 mm Book block format (min): 10 x 65 x 3 mm Max. mechanical speed: 20 mtr/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: like new (used), Frama Inserting Machine, Type DI380 Processes 3000 pieces/hour (folding and inserting) Folding types: C-fold, Z-fold, single-fold, double-fold Nedpfjyir Htox Ag Dela Sealing: Yes Paper input capacity: 325 Insert input capacity: 100 Envelope input capacity: 100