Used Seiko Seiko Dpu-414 Thermal Printer for sale (3,766)

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Rjdpjvzub Hsfx Ammju Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, Used ProJet SD6000 3D printing machine using stereolithographic technology. Rjdpfxstvfwks Ammeu The machine has had extremely low hours usage during its life so far, having been installed and minimally utilised from time to time for research projects at the University of Sheffield AMRC research department known as the “Factory of the Future”. Serial # 10311178101 Year 2014 MACHINE CONSTRUCTION & FEATURES The ProJet 6000 HD SLA 3D provides SLA quality in a compact footprint and is a printer which puts the unmatched capabilities of Stereolithography 3D printing technology, fine-tuned for cost-efficiency and unrivalled material availability, into a smaller footprint. 3D Printed SLA parts with unrivalled accuracy and surface finish. High Flexibility 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. • Two build platforms • One material delivery cart • Projet TM6000 Print tray • Washing Unit • Curing Unit 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. Print modes: High Definition, Ultra High Definition Resolution: (HD) 0.125mm, 0.125mm layer. (Ultra-high definition): 0.125mm, 0.10mm layer. Net construction volume: (short) 250 mm x 250 mm x 50 mm (medium) 250 mm x 250 mm x 125 mm, (tall) 250 mm x 250 mm x 250 mm. Accuracy: 0.025 – 0.05 mm per 25.4 mm of part dimension. BENEFITS: Stereolithography technology (SLA) Max build envelope capacity (W x D x H): 250 x 250 x 250 mm (10 x 10 x 10 in). Highest precision and accuracy Exchangeable Material Delivery Modules (MDMs). Utilizing two laser spot sizes per layer – no compromise between speed or feature detail. True line drawing in X and Y to accurately define curves. Industry-leading 3D Sprint software for file preparation and production. Cloud connectivity for predictive and prompt service with 3D Connect.

Condition: excellent (used), Year of construction: 2017, Stratasys 3D Printer PolyJet J750 With the Stratasys J750 3D printer, you can optimize and streamline the process of manufacturing models using various materials on a single build platform within the same print job. During the design phase, you can assign colors to different components of a model. The model can then be saved as a VRML file and printed with the desired colors. Ongoing maintenance package until June 2026, including spare parts, is included. The Stratasys J750 3D printer offers a build volume of 490 mm x 390 mm x 200 mm (19.3 x 15.35 x 7.8 in). AC Power Connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Rsdeyly Auepfx Ammeu Or 220–240 VAC, 50–60 Hz, 7 A, single-phase Technical Details Overall length: 1,400 mm Overall height: 1,100 mm Overall width: 1,260 mm Input current type: Alternating current (AC) Total weight: 430 kg Input voltage: 230 V Input current: 13 A Input frequency: 50–60 Hz Ambient temperature (min): 18 °C Ambient temperature (max): 25 °C Applications - Rapid prototyping - Concept models - Medical models - Tooling and fixtures - Coloured textures

Condition: used, This listing is for Transmed Star SP2000 Rsdpfx Amjyw S Rcjmsu The unit is in full working condition and ready for immediate use The Transmed Star Printer SP2000 is a robust dot matrix impact printer designed for reliable data logging in laboratory and industrial settings. It features a compact footprint, easy ribbon replacement, and high-speed character printing, making it ideal for generating hard copies of analytical results.

Condition: used, This listing is for the Sartorius YDP20-OCE Printerr The unit is in full working condition and is ready for immediate use The Sartorius YDP20-OCE printer provides reliable documentation for your weighing data. Direct-from-lab surplus in original condition, it ensures seamless integration with Sartorius balances for GLP-compliant reporting. Transparency Report and Technical Audit: • Source Pedigree: Tier-1 Biotech • Condition: Direct-from-Bench - Original • Power-On Test: Verified • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. • Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Rodpeywywdsfx Ammsu Notice for Procurement: This unit is sold As-Is, Where-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory..: This Sartorius YDP20-OCE printer provides reliable documentation for your weighing data. Direct-from-lab surplus in original condition, it ensures seamless integration with Sartorius balances for GLP-compliant reporting

Condition: used, Year of construction: 2016, functionality: fully functional, cooling capacity: 414.2 kW (563.15 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,441 kg, input voltage: 400 V, total width: 2,150 mm, total length: 4,550 mm, total height: 2,500 mm, warranty duration: 6 months, Aircooled chiller SYSTEMAIR SYSCROLL 420 AIR CO E COAT 414.2 KW Rjdpsxp I Daofx Ammou Cooling capacity: 414.2 kW / 117.78 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 4 pcs. Bitzer GSD80485VAB4-2 (scroll) Type of refrigerant: R410а Number of fans: 8 pcs. Dimensions: 4.55x2.15x2.5 m. Weight: 2441 kg. Working hours: 5588/5528/7735/2825 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2019, Durst RHO 312r LED The new quality standard for large format backlit and fine art applications up to 3.2m print widths. With Durst Quadro Array 12M printheads and Variodrop technology for high print speeds. Manufacturing Year: 2019 Colour configuration 6 colours (CMYK Lc Lm) Head status: very good Mileage: 260.000m² RIP: non available Service: under full service contract from Durst In production, demo possible Decommissioning, installation available upon request For further technical information please refer to enclosed brochure Technical Specifications Printing system: Roll-to-roll transport system with Quadro® Array technology. Motorized adjustment of medium and printheads distance Resolution: Up to 1,200 dpi Productivity: Rho 512R: Boost mode up to 364 m Rsdpsyxqi Tofx Ammsu 2 /h (3,918 sq ft/h) Rho 312R: Boost mode up to 305 m 2 /h (3,250 sq ft/h) Production mode with PO: Rho 512R: 152 m 2 /h (1,636 sq ft/h) Rho 312R: 130 m 2 /h (1,400 sq ft/h) UV Curing technology: LED or arc bulb lamps Colour options: Standard: CMYK Optional: Light Cyan, Light Magenta, Light Black, White, PCA inks on request Inks: Durst Roll LED, Rho Roll UV, Greenguard Gold certified Ink refill identification system: Integrated ink refill identification system to avoid wrong ink loading Maximum print width: Rho 512R: 500 cm (16.4 ft) Rho 312R: up to 320 cm (10.5 ft) Maximum material width: Rho 512R: 520 cm (17 ft) Rho 312R: up to 330 cm (10.8 ft) Maximum Roll media diameter: Rho 512R: 350 mm (13,7 in) Rho 312R: Standard 350 mm (13.7 ft) Big Roll 540 mm (21.2 in) Maximum material thickness: 2 mm (0.08 in) – material-dependent Maximum roll weight: Rho 512R: up to 270 kg (595 lbs) Rho 312R: Standard 350 kg (770 lbs) Big Roll 480 kg (1.058 lbs)

Condition: excellent (used), Year of construction: 2022, The Fujifilm Acuity Prime 30 is a high-speed UV LED flatbed printer known for its versatility and high image quality on various rigid and flexible media. Manufacturing Year: 2022 Mileage: 12.000m² only!!!!! Colour configuration: CMYK +W (+varnish or primer, disactivated, but can be activated again) Availability: February 2026 In production Location: Benelux Yearly maintenance done in February 2026 For further technical information please refer to enclosed datasheet General Specifications Feature Specification Source(s) Printer Type Dedicated true flatbed UV LED printer Max Print Speed Up to 150 m²/hr (1,615 sq. ft./hr) Max Resolution Up to 1200 dpi (Fine Art mode) Dimensions (WxLxH) 2.1 x 4.9 x 1.5 m Weight 1600 kg Media Handling Max Media Size: 2.5 m x 1.27 m (approx. 8 ft x 4 ft standard board size) Max Media Thickness: 51 mm (2 inches) Max Media Weight: 45 kg/m² Vacuum Zones: Five dedicated vacuum zones minimize the need for masking and aid quick media changeover. Rjdpfx Ajylxr Ismmsu Registration Pins: Pneumatic registration pins ensure quick and accurate loading of rigid media. Printheads: Ricoh Gen 5 greyscale variable drop printheads, with drop sizes from 7 to 21 picolitres.

Condition: used, functionality: fully functional, Fully operational printer. Model material licences for model materials type : ABS , PC, Ultem 9080 Rjdpfxjyzzmbe Ammsu

Condition: good (used), Year of construction: 2022, Component size: Length 1700 x Width 1050 x Height 1050 mm Printing process: The patented VFGF technology (Variable Fused Granulate Fabrication) is an advancement of pellet-based 3D printing with a variable nozzle opening. It prints in high resolution only where needed, such as on visible surfaces, and efficiently fills internal areas with thicker extrusions. In doing so, VFGF combines the advantages of FDM (Fused Deposition Modeling) for fine details and complex geometries with those of granulate printing (high deposition rates, material variety, reduced costs). Intelligent algorithms ensure the precise amount of material is placed exactly where it is required, even with complex shapes that involve overhangs or support structures. Areas of application: Suitable for prototypes, single parts, small series, and even higher production volumes. By melting the material in a specially developed screw extruder, high throughput rates are achieved, significantly reducing print times. This process is ideal for industries such as aerospace, mechanical engineering, and automotive manufacturing. Rodpfx Amsyyxlljmeu Advantages: This technology enables the production of components with unrestricted design complexity and high surface quality. Compared to filament-based 3D printing, it offers significantly reduced print times and material costs. As a result, economical large-format 3D printing in manufacturing is now possible for the first time.

Condition: excellent (used), Mettler Toledo Model: TGA/DSC 3+ Mettler Toledo TGA/DSC 3+ HT Thermoanalysis System + GC401 + XP5U + Huber Ministat – incl. STAR Software & Dongle For sale is a complete, fully operational thermoanalysis system from Mettler Toledo in high-temperature configuration (up to approx. 1600 °C), including software license (STARᵉ) with hardware lock (dongle). System configuration: - TGA/DSC 3+ (combined thermogravimetry + DSC) - High-temperature furnace (HT, up to approx. 1600 °C) - Sensor: FRS2 SDTA - Gas controller: GC 401 - Microbalance: XP5U - Temperature control system: Huber Ministat 230-MT (Pilot ONE) - Software: STARᵉ Software Version 16.00b - License: Hardware lock (USB dongle, green) Software & license: Included in delivery: - STARᵉ Software (Version 16.00b) - Original hardware lock (USB dongle) Functions: - Thermogravimetry (TGA) – Mass change (µg range) - DSC / SDTA – Heat flow measurement (mW range) - Temperature analyses up to high-temperature range - Measurements under defined gas atmosphere Technical data (excerpt): - Temperature range: RT up to approx. 1600 °C - Heating rate: typically 10 K/min - Gas flow: Air: 30 ml/min Nitrogen: 20 ml/min - Temperature accuracy: Indium: ±1.5 °C Aluminum: ±2.5 °C Gold: ±3.0 °C Palladium: ±4.0 °C - Weighing accuracy: 1 g: ±50 µg 5 g: ±250 µg Temperature control unit Huber Ministat 230-MT: - Temperature range: -40 °C to +200 °C - Voltage: 230 V - Power consumption: max. 11 A Dimensions & weight: - Total weight: approx. 100–150 kg - Multi-component system (laboratory equipment) Scope of delivery: Rjdpfx Amoyxcqvemeu - Complete TGA/DSC system - High-temperature furnace - GC 401 gas controller - XP5U balance - Huber Ministat 230-MT - STARᵉ Software incl. USB dongle - Documentation and accessories as shown in the photos Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors!) For further inquiries, please feel free to contact us by phone.

Condition: refurbished (used), functionality: fully functional, welding current (max.): 400 A, Equipment: type plate available, ESS EcoMag 414 – Water-cooled MIG/MAG Note: This is a Trade-in. Refurbished, tested, serviced, and ready for immediate use. Specifications: 40-400 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Steplessly adjustable Redpfxsywatre Ammeu Including PRO5000 Welding torch, earth work cable with clamp, gas cable, and +- 5 meter interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), functionality: fully functional, machine/vehicle number: G1001366, Year of construction: 2020, operating hours: 3,956 h, input voltage: 220 V, Technical data: Machine: 82.5 × 62 × 59 cm; 106 kg - Build platform: 294 × 192 × 148.5 mm Layer thickness: 28 µm; 16 µm Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material, and post-processing method Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Rodeyzzufopfx Ammsu

Condition: used, Set of dual setups on rolling stand. Dual print heads allows for the marking of two product lanes Great for printing dates or codes on virtually anything, from plastic bottles to plastic bags to paper Stainless steel casing Rodpjc Skirsfx Ammeu Stand mounted with casters Additional Details Voltage: other Voltage: 100-240 Phase: 1Ph Hertz: 60Hz

Condition: refurbished (used), functionality: fully functional, iAM Marketplace – the official used machinery partner of Stratasys! Several professionally refurbished Stratasys J35 Pro 3D printers are available immediately. Each machine undergoes a comprehensive inspection according to strict standards, with all print-relevant components overhauled and validated through multiple test prints. The result: reliable performance, high print quality, and a cost-effective alternative to a new machine. The machines differ in year of manufacture, equipment configuration, and operating hours. Detailed information on condition and price range is available upon request. Rjdpfx Amoywvgzemsu The Stratasys J35 Pro is a compact industrial PolyJet multi-material 3D printer with a build area of 1,174 cm². The machine is suitable for realistic design and functional prototypes as well as highly detailed models and can process up to three materials simultaneously in a single print job. This allows you to combine different material properties—such as rigid, transparent, flexible, or impact-resistant areas—within a single component. With a layer thickness of 18.75 μm and high dimensional accuracy, the J35 Pro delivers precise, repeatable print results with extremely fine details and smooth surfaces.

Condition: defective spare-parts repository (used), functionality: limited functionality, With this offer, you are purchasing a used A2 DTF printer ‘DTF Speedline Model Y402’. Item for sale: 1 x DTF Speedline Y402 with the following equipment: Includes oven Device does not function, print heads need to be replaced Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has not been tested for functionality. Packaging and shipping: Rjdpex Ehggjfx Ammju You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Year of construction: 2013, condition: good (used), PCB: 45 × 45 mm to 610 × 515 mm PCB thickness: 0.2 – 8 mm Stencil handling: automatic Squeegee material: metal or polyurethane Squeegee pressure: 1 – 20 kg Printing speed: 5 – 250 mm/s PCB clamping: pneumatic Interface: SMEMA Power supply: 110 – 240 V, 1 phase Redpfx Ajyvlcpommou Current consumption: approx. 10 A Weight: approx. 650 kg All information provided without guarantee.

Year of construction: 2026, condition: new, functionality: fully functional, new PMH filament line extruder 30 mm - 28 l/d with noozle for 3D-filament Rjdpfxjch Sfqs Ammsu with cooling tank with blow-up system for adhesive water with Laser control system (option) with puller with filament accumulator (option) with winder and traverse guide MADE in GERMANY

Condition: refurbished (used), functionality: fully functional, iAM Marketplace – The Official Used Machinery Partner of Stratasys! Rodpfxsyvz Smo Ammsu Several professionally refurbished Stratasys Fortus 450mc 3D printers are immediately available. Each machine undergoes a comprehensive inspection according to strict standards, is thoroughly overhauled—focusing on all print-relevant components—and validated through multiple test prints. The result: reliable performance, high print quality, and a cost-effective alternative to new machinery. The machines vary in year of manufacture, configuration, generation, and print hours. Detailed information regarding condition and pricing is available upon request. The Stratasys Fortus 450mc is an industrial FDM 3D printer featuring a build volume of 406 x 355 x 406 mm. This machine is suitable for functional prototypes, production tooling, end-use parts, and small-series applications. It excels with high dimensional accuracy, repeatable print results, and reliable performance in industrial environments. Thanks to its wide material compatibility—including high-performance and ESD materials—the Fortus 450mc can be flexibly deployed for various applications in manufacturing, aerospace, automotive, and general industry.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 3009F484403, Year of construction: 2022, operating hours: 217 h, We are offering this 3D Systems ProJet2500 3D printer, manufactured in 05/2022, for sale. With only 217 printing hours (8 kg material), the printer is almost like new. If you have any questions or require further information, please feel free to send us a message or call us. Rodpfx Ajyfv Dbommju

Condition: refurbished (used), functionality: fully functional, iAM Marketplace – the official used machinery partner of Stratasys! Several professionally refurbished Stratasys J850 3D printers are immediately available. Each machine undergoes comprehensive inspection in accordance with strict specifications, with all print-relevant components overhauled and validated through multiple test prints. The result: reliable performance, high print quality, and a cost-effective alternative to buying new equipment. The machines vary in year of manufacture, features, and operating hours. Detailed information regarding condition and pricing range is available upon request. The Stratasys J850 Prime is an industrial PolyJet full-color 3D printer with a build volume of 490 × 390 × 200 mm. This machine is ideal for realistic design and functional prototypes as well as demanding models, processing up to seven base resins simultaneously for multi-material parts in over 500,000 colors—including transparent and flexible areas. It is PANTONE-validated and offers layer thicknesses down to 14 µm (55 µm in super-high-speed mode) as well as high dimensional accuracy for consistent, repeatable print results. Rsdsyu Racepfx Ammeu

Condition: reconditioned (used), For Sale: EOS M400 – High-Performance Metal 3D Printer This EOS M400, is a cutting-edge metal additive manufacturing system located at the customer’s site. It is equipped with a 1kW laser, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 1kW • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1 • Aluminum alloys: AlF357_1, AlSiMg_1 • Copper alloys: CuCrZr_1, Cu_1 • Stainless steels: GP1_1, PH1_1 Rjdpjvq Sm Eefx Ammju • Tool steels: MS1_1, SP2_1 • Titanium alloys: Ti64_1, Ti64ELI_1, Ti64Grade23_1, TiGrade5_1, TiCP_1 • Custom gas options: CustomAr, CustomN2 • Cobalt chrome: MP1_1 Why Choose the EOS M400? • Large build volume for industrial-scale production. • High laser power for enhanced speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Condition: used, Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 8945646465, total width: 2,000 mm, total length: 12,000 mm, total height: 1,800 mm, overall weight: 3,500 kg, air demand: 1 m³/h, ASAP Digital textile printing machine, pigments inks, GOTS and Oekotex 100, class baby articles, printing width 1.80m Technical specifications - Ink type: Kornit NeoPigment™ Intenso, water-based - Color channels: 7 (CMYK + Red, Green, Grey) - Pre-treatment: integrated 8th channel - Print heads: 64x Spectra Polaris (recirculating) - Print width: up to 180 cm - Print speed: up to 200 m²/h - Print resolution: 400–1200 dpi (recommended 600 x 600 dpi, 6-pass, interlaced) - Ink capacity: 4 liters per color Redpfx Amsw Tynmjmou - Weight: approx. 3,500 kg - Power supply: 3-phase, 25 kW, 110/220 V, 50/60 Hz

Year of construction: 2019, condition: excellent (used), functionality: fully functional, The Linx 8920 CIJ (Continuous ink jet printer) Print head included MIDI MK11 V4 Redpeyinpvjfx Ammou Stainless steel machine stand included. Service module requires replacement. Serial number KF680 See data sheet below

Condition: not inspected (used), Dear Sir or Madam Redpfx Ajwktwkommou We hereby offer you the following device for sale: Keyence Agilista 3200W 3D printer. The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction.