Used Single Single for sale (8,447)

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min Nedpfx Aaey Dvlqs Telf speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function Nljdoztl Scjpfx Aa Tsf GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 1,750 kg, rotor diameter: 250 mm, rotor length: 600 mm, power: 30 kW (40.79 HP), Pre-shredder: 1 unit Forrec AE 600/30 single-shaft shredder: - Drive: 30 kW - Dimensions: 2,250 x 3,050 x 1,600 mm - Rotor diameter: ø 250 mm - Hopper dimensions: 1100 x 1000 mm - Hopper capacity: 750 liters - Production: 600 kg/hour (mixed cables) - Weight: 1,750 kg - 1 set of original Forrec spare parts Accessories: - Electric lift table for material feeding - Conveyor belt for shredded material discharge - Metal platform for material feeding The machine has been disassembled and is in storage. Therefore, a functional test is not possible. Pickup only in 14727 Premnitz. Nljdpfx Aasztaure Tjf

Condition: ready for operation (used), Siemens 6SL3120-1TE15-0AA4 Single Motor Module Version: B SN:T-FO6013590, used, in good condition, 100% functional, delivery scope as shown in the photos. Nljdpfx Asx Euz Hoa Tsf

Condition: used, spindle passage 25 mm turning speeds 5750 U/min Rest 4 Njdpfxsyquqqo Aa Tslf turret head 8 bar loader LNZ Hydrobar type 6.26HS-4.4 Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2006, operating hours: 3,000 h, functionality: unexamined, machine/vehicle number: 49291, rotor diameter: 890 mm, rotor length: 1,500 mm, power: 400 kW (543.85 HP), type of input current: three-phase, input voltage: 400 V, An industrial shredder manufactured by ELDAN Recycling A/S, based in Faaborg, Denmark, is available for purchase. This equipment is designed for size reduction of light waste streams, electronic scrap, and non-ferrous metals. -Rotor Mechanism and Cutting Components The processing mechanism consists of a rotor housing containing a main shaft equipped with 18 guide plates and 2 end plates, which are secured by keys. The machine features 36 vertical-flex ring hammers distributed across 4 secondary shafts, providing 2 rings per main guide plate. When the rotor spins, centrifugal force drives these rings into an outward position. When feed material is introduced, the rings dynamically retract between the rotor plates to absorb impact, returning to their outward position once the material passes. The drive torque is transferred smoothly to the shredder via a hydraulic coupling to effectively handle shock loads. -Material Applications and Feed Capabilities The Shredder Type S1500 is engineered to process light waste materials, including: Telecommunication equipment scrap Electronic waste and WEEE Sheet metal, turnings, and general metal scrap Aluminum parts The maximum dimensions for input material are approximately 1000 mm in length, or a maximum surface area of 600 x 600 mm for sheet metal with a thickness of 2 mm. These feed dimensions apply when the machine is operated with screen grates measuring 40 x 105 mm or 25 x 105 mm. Using smaller screen sizes requires a reduction in feed volume to prevent equipment overload. Nodszqywhspfx Aa Tslf -Maintenance and Accessibility Features The shredder housing is split into an upper and lower section connected by standard bolt configurations. The upper section and the attached feed hopper open via hydraulic cylinders, allowing direct access to the rotor for maintenance and inspections. The lower housing contains the impact bars and supports two screen holders, which contain 2 and 3 screen segments respectively. Both screen holders are independently operated by hydraulic cylinders to facilitate quick access and grate changes. The original technical manual covering operating procedures, maintenance instructions, and lubrication schedules is available with the machine. Serial number 49291. Contact for pricing, location details, and inspection scheduling. The following parts are included: - housing - intake hood - chassis - 3 rotors - hydraulic group - electric motor + hydro coupling More photos are available upon request. An on-site visit is possible.

Condition: used, color: other, first registration: 07/2006, Year of construction: 2006, Empty weight: 400 kg Serial number: 163 07 3 439 Nljdpfozqynyox Aa Tof We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/2006, Year of construction: 2006, Empty weight: 400 kg Serial number: 163 07 3 439 We have a stock of >100 axles. Nedpozqyk Uofx Aa Telf Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/2006, Year of construction: 2006, Empty weight: 350 kg Serial number: 163 07 3 439 Nodpfx Aezqykzea Tjlf We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/2006, Year of construction: 2006, Empty weight: 350 kg Gebruikte trailer as zonder type plaat. Nlodpezqykhsfx Aa Tjf

Condition: used, Year of construction: 1980, used, in excellent condition Manufacturer: Raimann Type: K 23 Year of manufacture: 1980 Engine power: 37 kW Track width: 250 mm Cutting width: approx. 230 mm Nsdpoxuv Nusfx Aa Tolf Cutting height: approx. 120 mm without pressure comb / with 110 mm Feed rate: max. 8 - 35 min, infinitely adjustable Saw blade diameter: 360 mm x 80 mm bore Shaft diameter: 65 mm Workpiece length: min. 290/750 mm Dust extraction connection: D 200 mm Space requirement: approx. 2400 mm x 1500 mm x 1600 mm Weight: approx. 2100 kg Total connected load: approx. 75 A Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition, as inspected Without warranty

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydr. feed pressure device (HNDE), feed hopper, Njdpjzhg Eyofx Aa Tjlf Available from approximately the end of August.

Year of construction: 2001, condition: ready for operation (used), X-axis travel: 220 mm, Z-axis travel: 635 mm, swing diameter over the bed cover: 570 mm, swing diameter over the cross-slide cover: 420 mm, speed range: 25-5,000 rpm, spindle bore diameter: 65 mm, chuck diameter: 250 mm, tailstock travel: 550 mm, main spindle drive power at 100% duty cycle: 21 kW, maximum torque: 240 Nm, C-axis holding torque: 200 Nm, control system: Heidenhain EP 4290 TP, connected load: 44 kVA, length: 3,250 mm, width: 1,750 mm, height: 2,300 mm, weight without chip conveyor: 5.3 t, operating hours: 16,930 h. Equipment: Hydraulically adjustable three-jaw chuck with various interchangeable jaws, MK4 tailstock quill, 12-station VDI 30 disc turret with 6 driven tool stations, tool measuring arm, workpiece pick-up device, coolant system, chip conveyor, coolant mist extraction system, various tool holders, Drehwerk turning and milling tools including driven tools, two tool cabinets and documentation. The main spindle produces running noise. An on-site inspection is possible. Nljdpszrn H Tofx Aa Tof

Year of construction: 1999, condition: ready for operation (used), Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible. Njdpfxezrn Ids Aa Tolf

Condition: used, color: other, first registration: 08/2006, Year of construction: 2006, Serial number: HSF 9010 ECO-P We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Nodpszp U I Eefx Aa Tslf

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Technical data: - Pressing force: 125 t - Stroke: 340 mm - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm - Plunger adjustability: 75 mm - Stroke adjustment: 20 - 180 mm - Stroke rate: 80 1/min - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation - Central lubrication Nledpfx Aey Tvdxsa Tsf - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm - Weight (approx.): 9400 kg

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Approximate technical data: - Pressing force 10 t - Overhang 150 mm - Table size 520 x 320 mm - Adjustable table height 160 mm - Through-hole in the table 165 x 125 mm - Overall installation height 220 mm - Ram area 240 x 150 mm - Dowel hole in the ram 30 mm - Ram adjustability 40 mm - Stroke adjustment 4 - 60 mm - Stroke rate 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive 380 V / 1.1 kW - Space requirement approx. W 1000 x H 1800 x D 1100 mm Nlsdpoktg Dhsfx Aa Tof - Weight approx. 1300 kg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 053-019/35, Offer 24591 Technical specifications: - Maximum press force 25 t - Maximum ram stroke 500 mm Nlodpfx Aaewd Nybo Tef - Stroke speed 0 - 40 mm/s - Return stroke 0 - 200 m/min - Installation height 800 mm - Throat to ram center 360 mm - Ram clamping area 440 x 360 mm - Ram clamping pin 40 mm - Table size 630 x 500 mm - Table height above floor 710 mm - Deep drawing force 10 t - Maximum deep drawing depth 160 mm - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm - Weight approx. 2500 kg

Condition: good (used), Year of construction: 1973, machine/vehicle number: 727173, Offer 25450 Technical Data: - Pressing force: 100 t - Throat depth: 300 mm - Table size: approx. 650 x 450 mm - Table height adjustable - Pass-through hole in table: approx. 200 x 100 mm - Max. installation height: approx. 450 mm - Ram surface: 70 x 140 mm - Pin hole in ram: 40 x 80 mm - Ram adjustability: 60 mm - Stroke adjustment: 10 - 100 mm - Strokes per minute: 80 /min - Pneumatically assisted clutch - Drive: 380 V / 5.5 kW - Space requirement (approx.): W 1350 x H 2550 x D 1600 mm - Weight (approx.): 5000 kg Nlodpoxxvzlofx Aa Tof

Condition: used, Year of construction: 2018, operating hours: 903 h, Dynapac CC1200 VI roller from 2018 with only 903 operating hours: ----* Manufacturer: Dynapac * Type: CC1200 VI * Year of manufacture: 2018 * Operating hours: approx. 903 * Operating weight: approx. 2,550 kg * Working width: 1.2 meters * Kubota diesel engine * Water sprinkling system * Good condition * Video available upon request (WhatsApp Erik) * Price: €12,900, net + 19% VAT Njdezq Aitjpfx Aa Tjlf ----For further questions, please call: Erik Kortum: WhatsApp ?All information is subject to change without notice and does not constitute a guarantee. Errors and prior sale are reserved.?

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t Nodpfx Aozrprqoa Tjlf dimensions (WxDxH) 1,2 x 1,8 x 2,4 m

Condition: used, Year of construction: 1982, pressure 150 t throat 520 mm stroke 30 - 200 mm no. of strokes 15 - 60 /min distance table/ram, max. stroke up, adjustment up 650 mm table surface area 1600 x 1000 mm hole in the table 1040 x 140 mm table height over floor 1000 mm passage to the back 1000 mm ram surface 1400 x 800 mm ram adjustment 120 mm power requirement 20,0 kW weight 27,5 t dimensions (WxDxH) 2,3 x 2,75 x 4,5 m with infinitely variable drive, pneumatic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, semi-automatic ram adjustment Nedpfxozrprko Aa Tolf

Condition: used, Year of construction: 1961, pressure 063 t throat 280 mm stroke 8 - 100 mm Nedpfx Ajzrprdja Tjlf no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 230 mm table height over floor 800 mm ram surface 310 x 255 mm ram adjustment 63 mm power requirement 5,5 kW weight 3,95 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm Nlodszrpqmepfx Aa Tof no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min throat 500 mm passage to the back 800 mm dayligth 950 mm Nlsdpfszrpqgox Aa Tef table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm ram adjustment 125 mm power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation